PatioWell Metal Shed Assembly 10'x10'
ฝัง
- เผยแพร่เมื่อ 14 ก.ย. 2023
- Today we are sharing the finishing of a PatioWell Metal Shed Assembly 10'x10'.
Hi, we are Matt & Sara. Along with our 4 kids, our dog, our cat, kittens, 4 pigs, a lot of chickens and even more bees we have been developing our homesteading lifestyle. After over a decade on our property we are finally debt free and using our new FREEDOM to do what we have always wanted to do (be more self reliant)!
🛍️ Shop our favorites:
Shed: www.patiowell.com/products/me...
Garden Beds (Use Coupon Code MATTSARA to save 5%): savanagarden.com/?ref=mw64yf7p
Garlic Drying Rack: amzn.to/43eNkJb
Seed Discount Code (10% Off all Survival Kits): survivalgardenseeds.com/?ref=...
Soil Blocker: amzn.to/3Sle5b6
Perlite: amzn.to/3xBGUX5
Peat Moss: amzn.to/3KnnIE8
Incubator: amzn.to/3KaBRnX
Pasta Attachment (I have the 3 piece set): amzn.to/3VkrIHE
Presto Electric Canner: amzn.to/3aCEEDu
Ice Cream Attachment: amzn.to/3YejBhA
Ball Canning CookBook: amzn.to/3DN8NhQ
Crock for sourdough: amzn.to/3Wha4ER
Try these boots this Winter: amzn.to/3hAoBNV
Sous Vide: amzn.to/3PliYO7
Bread Pans: amzn.to/3FpT5Ko
The Best Animal Feed Bowls: amzn.to/3USQeiz
Food Processor: amzn.to/3DpTQ6j
Emersion Blender: amzn.to/3CC8DsM
Vac Sealer: amzn.to/3etM4yC
Kitchen Aid Apple Cutting Attachment: amzn.to/2XhWGro
Mill Attachment for my Mixer: amzn.to/3KMJwY5
My favorite fermentation tops and weights: amzn.to/3Qgio52
Cherry Pitter: amzn.to/3P9Tkfn
Enameled Dutch Oven (I have the 7 quart): amzn.to/3SCbEAv
Padded Rugs: amzn.to/3oQCNSL
Sponge for Scrubbing Produce: amzn.to/3zQDq54
Seeding Square: amzn.to/3l3PkA8
Soil Thermometer: amzn.to/3PUxldA
Ice Maker (We have the Nugget) : www.rwflame.com?aff=112
Egg Steamer: amzn.to/3yYiOYa
Tomato Clips: amzn.to/3wkyjFd
Tortilla Press: amzn.to/3QVpUU8
Aivituvin Cat House & other items: aivituvin.com/collections/cat...
Deicing Cables: amzn.to/37IEwjV
Axe: amzn.to/3n4bSD5
Garden Undated Calendar Book: amzn.to/3EX6pn5
Salad Spinner: amzn.to/32JOhQl
Kitchen Aid Mixer: amzn.to/3EoGbuP
Fermentation Kit: amzn.to/3EkydCJ
18 Quart Roasting Pan: amzn.to/3sP58u0
Castille Soap: amzn.to/3BJumhl
Hoops: amzn.to/2JPPWdz
Plastic: amzn.to/2JSQkIq
Timer: amzn.to/2JHvVGf
Pig Nipplers: amzn.to/3S0WJPc
Buy Organic Chicken and Pig Feed in bulk and bagged through Fresh Starts Farm/ Rye in Mora, Minnesota: www.freshstartsfarm.net
Our Potting Mix:
Potting Mix:
3 parts peat moss or coconut coir
3 parts compost or worm castings
2 parts Perlite
Water
Contact Us: homesteadingyt@gmail.com
Drop us a line ...
Matt & Sara
PO Box 9
Carver, MN 55315
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting us so we can continue to provide you with free content each week!
Music is Courtesy of Epidemic Sound
#modernhomesteading #minnesotahomesteaders #homesteading - แนวปฏิบัติและการใช้ชีวิต
We miss you all, any video of you all we would appreciate! Glad we got to see you again. 😂😅😊
Thanks we actually miss making daily videos. It just got to hard and it doesn’t pay the bills. So we are just trying to post as much as we can.
Pretty cool, my friend bought 2 of the same shed and he wants me to assemble them. You r video helped me out alot by seeing what it looks like and what construction is about. Thank you for your video my friend!!
This Guy is the Real Deal …!!!
I’m deeply motivated 😎
Palm Beach County Florida 💯💯
😃
Yes, more videos! Great job. I wish I could move that fast. Hats off to you, Now fill er' up.
😆 right. I am going to fill it up today
Just finished mine today. Worked on it an hour here, hour there… probably have a total of 8 hours in it over a two week period but, I definitely took my time and didn’t Rush anything. The directions, for the most part were OK but, that’s where your video came in handy so thank you for that. All in all, not bad. Definitely cheaper than a wood shed delivered or build one.
That’s awesome glad it went well. Yes way cheaper and easier to move if you need too. 😃
I don’t remember
Thanks.
Wow Matt did a great job with this shed even though Sara wasn’t there to make sure he didn’t miss up
Thanks
Thank you for posting this, inspired me to build one myself. Its already being shipped!!! Cant wait to start this project
That’s awesome! It was a pretty basic build but feel free to reach out if you have questions and enjoy your new space!
I really enjoyed learning from your video. Lost my instructions, so very grateful you made this video.
😃
You lost them no way
Looks good.
Thanks
I want to see how you’ll organize. I can always use ideas and inspiration.
👍😃
Great videos, starting a 10 x 12 tomorrow, gonna use your videos as I go along👍
Nice
Damn a 10 x 12, mr. Moneybags..
I used my wife's hair dryer for removing the plastic works great
That is a awesome idea
I wonder why there’s so many air gaps
Okay I think I can do it. Awesome videos it help a lot.
👍😃
Nice job! I was debating on how to do the roof frame, my instructions show putting it together then putting it on top. One thing with mine, they consider the overhang in the size. It never said to make the floor frame shorter. Now I have 3 inches wider on each side.🤣
😆
Keep an eye on the roof when you get all your snow this Winter. 🤔I'd rather see a video of the bees.😁
Yeah I am wondering about that. The bees are alright. We only had rain this spring really all summer until today. So no honey this year and I am feeding them to get them to bulk up.
I wish the boxes were labeled in line with the instructions. If you enjoy a good scavenger hunt, you'll love this shed kit 😅
😄
Let’s see it all!
👍
Nice pair of videos! Looks like about a three-hour job for two people. You could employ the offspring as plastic-peelers, get some use out of 'em. 🙂
-- Recommend you cover the vents on the inside with screening to keep out flying insects. Don't want wasp nests in there! And if the corrugated nature of the siding/roof panels allows gaps, use spray foam to seal those gaps up.
-- When you use it as a pig barn, maybe install some foam panels with the reflective side facing inwards on the roof and walls, to keep it warmer in the winter. Maybe also tape over one vent on each end in the winter, also for warmth.
How were the fasteners? Anti-rust? Me being a bit obsessive/paying attention to detail, I'd swap out inferior fasteners for SS ones.
Thanks for all the great ideas. 😃 so far nothing has rusted.
Nice job. Here's a tip learned the hard way. Anchor your shed to the ground or eventually you will find it upside down.
Thanks I will do that
How?
They have holes in side
@@mattsara2802 and you just put like j pins in them or does it come with it? I bought one and about to start putting it up
It did not come with any. I used tent nails at an angle.
😂😂😂 why did you cover up the advanced sunroof... good morning my amazing friends.. have a very blessed day
😂 good morning Jason
Congrats! For doing the job yourself, What happen to your neighbaa like Arnold would say in helping you.
Im getting ready to build this shed . Looks like the plastic was the toughest part . Lol good lord . I think ill need help
Yes it is 😄
That so called plastic is supposed to be the UV protective layer, so they say anyways.
No wayyyy it would look like crap if you leave it on
The vents on top of the door are wrong,flip them or you gonna have water leaks
I will take a look. Thanks
@@mattsara2802what about the floor
This true?
When the rain falls up, that vent orientation should keep things dry in the front for sure.
Thanks for this video, very helpful and informative. I am considering this shed but not looking forward to all that peeling. Was wondering how wet it gets inside when it rains, does the roof leak?
Nope no leaks.
How it did with the snow ? I just bought one, and it snow a little bit by where I live.
It did good here. We didn’t get much snow but when we got snow, it was wet and heavy and 4 to 5 inches at a time.
How did you do the top panels. For me the pre existing holes didn’t align with thw holes on the top of the panel. They didnt align with the center support beam.
Check to see if the shed is square by measuring from corner to corner. They should be close.
Wow!!! That’s a beautiful shed…Hi 👋 I’m a new subscriber and friend 😌🫶🏼
Von Cola Dose das Blech ist dicker und stabiler als diese Hütte.
Yes 🫣
I'm struggling it's a nightmare 😅
Sorry to hear that
That plastic looks like a real pain in the a**. Probably took as long to remove the plastic as building the shed. Nice looking
It was but worth it
How does it fair as far as water tight? I have read comments that it leaks... thanks! About to buy 10x12 and so would love a quick comment back.
Mine hasn’t leaked yet
How long did it actually take to assemble???
Thanks
6 ish hours
It looks really good but I would've left the plastic on for strength
😄
I just finished mine today. The doors are quite tight and overlap. Any suggestions would be appreciated? I think i messed up that part.
You should be able to loosen up the doors so you can line them up.
Did you anchor it to the ground? If so how?
Yes I used big tent stakes
I just bought an 8x10 that looks just like that from Amazon, but has the floor frame. Is it as flimsy as it looks? How has it held up so far?
It is flimsy, but once it’s put together, it’s not too bad it’s holding up really nice so far
You find it sturdy enough ? I read on the reviews that it's flimsy. Your thoughts ? Great video
Once it’s all bolted together I think it’s fine. It’s definitely light so you should anchor it down
What if you leave the plastic on?
I actually did on one piece on the back and it’s starting to peel and it looks really bad
I will buy that one but first I will make a concrete floor. I have a smaller one and it is now 13 years old and still fine, but it is on a concrete floor.
Good job 👍🏽
That’s awesome. I have been thinking about moving it to pour concrete as well.
Great video, thanks. I'm getting ready to buy one myself to put my motorcycles in. How many swear words were made while assembling? They say something isn't great unless at least 3 come out. 😂😂 But thanks again.
😂 just at the plastic 😆
You need to turn the vents over so the rain will not got in the shed. Great job otherwise
Thanks. Someone said that right after I posted the video so I changed them and right after I did it rained. So glad I did.😃
Is it really necessary to remove the plastic?
It won’t look good when it starts to peel
I appreciate the videos.Helped outd got my shed built in a day took a day to build the platform
What brand is that? Is it aoxun galvanized steel shed?
Patio well
Just built mine and door aren’t leveled , why??
You need to adjust the price that the hinges are on.
@@mattsara2802 switch them or just try and move them
I would just move the top or bottom
Does the plastic need to come off
Yes. If you don’t the elements will do it and it won’t look that good
You think it’s in fit for a man cave like a gaming room?
Depends on the state. Here in Minnesota you would need to finish it to stay warm.
How many hrs in total?
8 ish I think. Taking the plastic off was the longest.
I cant get mine square so my roof is off by 2inches 😅
Oh no.
How do you stop it from leaking?
Leaking? Mine does not leak.
Is it me or is the air vents upside down? The 1:57 timer.
😆 I went out and checked and they are all the same. 🤷♂️
This dude paying me $200 to install his shed. Bra I’m happy
Heck yeah that’s awesome
I just got a $1200 quote to have someone build mine
@@brandon7798 I can built one for you cheaper, where you from? What state? Built it from ground up or one of those packages that you order from amazon?
From where?@@brandon7798
Your one ab! 😂😂😂
😁
I left plastic on screw it
😄
You put it on the ground? Not a platform!? Oh! Brother, don't follow this guys example.
The weight of it is going to settle in the dirt over time and will become uneven and doors will not close properly. Especially if you stand, walk, or roll a lawnmower over the threshold.
Lol, yeah because it weighs so much when I lift it up with one hand. Been driving over that threshold and doing everything to that thing and it still works just fine thanks for your info though.
WD 40😂😂😂
😂