2012 VICTORY HIGHBALL - Featured Bike
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- I introduce my 2012 Victory Highball to the channel. Don't forget to like and SUBSCRIBE for more victory content !
We love all motorcycles, but all of us have a soft spot for Victory motorcycles in particular and have sworn to keep them forever.
For all your Victory Power needs check out Lloydz Motorworkz
lloydz.com/
For handlebars, sissy bars and highway bars check out Dean Speed's work
dean-speed.com/
For more VICTORY
• Victory Motorcycles
Good to see you guys at laconia! Keep up the good work!
What a great looking motorcycle. And those wheels !! Excellent choice 🎉
Thank you
GREAT build. Ive been debating the BMC seat and am sold now!
Sick horse my man keep victory alive
Thank you, I don’t plan on parting with it !
Great video. Loving my 2015 highball.
Nice bike! And because of this video I'm going to be getting those Deans crash/highway bars.. thanks!
Thanks for watching, they're a great add on. Saved me from some damage once and double as highway pegs.
The penske Rear Shock is a game changer, I have one on my Judge and I have the rear lifted about an inch and a half. I'm working with a guy in Ukraine to make me a set of the fork cap extensions like yours. Also if you want to bring the rear up a little more for cheap, you can put an older set of shock links from a pre 2008 kingpin or similar.
Yes I’ve heard great things about the Penske as well. As for the rear , that’s what’s on there an older kingpin shock the brought it up about an inch. Thanks for watching. Hopefully you’ll subscribe and check out some of our other victory content !
@3 Amigos MotorSports not just the shock, but the shock links as well, aka "dogbones" the older bikes links are a little bit shorter in length than the new bikes.
Would you recommend this seat by BMC? I’ve been looking all over for a high back seat like this for my Vegas. Looks like the back is a lot higher and offers more support than the other Corbin solos I’ve seen on steel frames
Great bike, nice video. I presently have a Triumph Bonneville T-120 Black and absolutely love it. I'm currently in the market for a Vic HB and would love to own one. My only reservations is that parts (including aftermarket pipes and torque tubes) are getting harder and harder to find. OEM parts for the Vic? Forget about it! Love the bike and the brand. Hated to see them go.
Wish there was more availability for parts though. Any feedback you can give would be appreciated.
Thanks man!
Thanks. The parts are still out there you just have to be resourceful. One of the best resources for new and used is the victory forums on Facebook.
Great video
Thank you! Make sure to hit that subscribe button. We have a new Victory video coming Monday .
Badass
Nice bike and video man. Where did you get the smoked turn signals at?
eBay, They’re actually the same fit as older Ducati monsters .
how is that seat held onto the bike ? does it have a tab under the tank? & does it attach underneath to rear fender? bike looks sick bruvvah
It uses the two bolts under the fender struts to hold it on. Thanks
appreciate the video, have a 2013 highball. couldn't catch the name of motorcycle shop for crash bars. was it Deans? and if so did you price around or check other similar bars to see if they fit.
thanks
Thanks . Dean speed customs. He’s hard to beat for victory parts . There’s not many people making them !
Nice bike, where did you get those smoked turn signal covers
Thank you. I got them on eBay . Oddly enough older Ducati monster covers will fit.
@@3_AM appreciate your help, would you happen to know what years would work.
@@appletonlawncarelandscape2172 I found the idea from the victory forums. I just looked up a post that said 2006-2010
That seat makes that hole bike!
@@xarrow81 Thanks. I miss this bike!
Where the victory judge controls a plug n play or did you have to modify them to fit. Thank you in advance
They bolt up the same with a different length shift linkage on the shift side. The brakes I did have to change the routing of the brake return line for the difference in length.
Just ordered the same handlebars for my 2015 Gunner. Any advice with installation?
Mounting is pretty straightforward, hairspray works will for grips , cover your tank with something while you’re working to prevent scratches. You may need extended cables for the gunner . It will be close ! Thanks for watching, don’t forgot to Subscribe 👍🏻
I have a 2008 kingpin I think the fuel pump went out, and the Air filter is so dirty. Can your filter keep it from starting up?
I put an after market pump on it, and it still won't crank!!!!! I heard that those after market pumps weren't worth putting on but this is the first one that I have dealt with.
The fuel pump shouldn't prevent the bike from cranking. That sounds more like an electrical issue regarding the battery or starter.
@@3_AM the bike turns over just fine, but it's not getting any fuel. I could hear the fuel pump kicking in until it stopped working. The bike starts up when you are using ether but it doesn't stay running.
Hey man where did you get those smoked out blinker Housings? I can’t find them anywhere
eBay , they fit from an older Ducati monster
What did you do with the wire harnesses in the original light bucket I'm doing a build very similar to this thanks for the inspiration do you mind if I ask some more questions?
No problem, I extended all the factory harnesses. The hand controls are internally wired and the Speedo wiring comes up the center covered in loom. I had a friend who likes wiring. Instead of cutting and soldering lengths in at two ends he de pined all the factory plug ends , soldered 10” or so on the ends , re crimped every pin on each wire to then clicked them back into the plug ends. It was a process but it looks better than factory .
@@3_AM that's amazing I knew I had my work cut out for me I have carlini gangster apes on that I ran internal wires but I'm waiting for the double backs and fairing before I tackle the wire harnesses. Thank you for the help I don't suppose you have a link for the light you put in I pretty much look a list of all the stuff you did lol I hope you don't mind I'm painting it my self too with a slayer theme
@@jonevans3834 the headlight was a 5 3/4 Amazon special with an adapter. I believe wisamic was the brand . I’ve heard good things about the sunpie brand for another cheap option. They’re brighter than stock.
Hey, you know where you got those exact fork boots?
They were from eBay .
www.ebay.com/itm/Harley-Fork-Boots-HD-Softail-Wide-Glide-Big-Twin-FXST-FXDWG-41mm-Fork-Gaiters-/162769883399?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Are they still making that shield? I can’t find anything anywhere.
They are made to order and mine took 8 months! A lot of guys are making the cheaper krator fairings work
Oh ok thanks for the info!!
Where’d you get the fairing and did you have to switch the headlight
It’s a Rifle Fairing, and yes I switched from the triangle one to a oem round.
@@3_AM where’d you find the round headlight/headlight bucket
@@thevapester3818 the victory parts Facebook forums are always your best bet, keep an eye on eBay . Some people really like the triangle ones so I’ve seen guys trade.
Thanks for watching. I hope you hit that subscribe button !
@@3_AM can you help me find a round headlight can’t seem to find any
Where did you get the windshield? I have a hard ball.
It’s from rifle fairings
What seat is that bro
BMC - "the wall"
@@3_AM thanks guys I just got a 2017 gunner and looking for a seat
@@DonYogi760 BMC makes I think 3 options , all which can be custom materials. Check them out !
@@3_AM I appreciate yall man yea I rode the gunner from Phoenix to north carolina 4400 miles in 4 days on stock seat it was hell man first bike trip and first nationals one for the books for sure
@@DonYogi760 that’s a hell of a ride . Thanks for subscribing! . A few of us run BMCs no complaints
SUPER KEWL
Why the ugly little faring 🤔
Function,and it ain’t ugly in my book.
@@3_AMwhere did you get the fairing? Im tired of being a parachute
@@mattm8937 it’s from rifle fairings . Rifle roadster fairing but they are notorious for long leads . It took 8 months to get mine. I see a lot of guys are making the Amazon “krator” fairings work . There’s a lot of posts about them on the Facebook forums.
Thanks for watching
Still have this bike forsale?
I don’t, but the gentleman I sold it too has it for sale in mass on marketplace. I believe he wants back into a bagger .
@@3_AM thanks