£1,000 vs £14,000 Pressure Washer!
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Link to purchase the JCB Pressure Washer:
jcb-tools.co.u...
Links:
Business enquiries - Sid@PartridgeExteriorCleaning.co.uk
Consultations - Partridgehelp@outlook.com
Merch - pec-merch.teemill.com
Patreon - / sidpartridge
Instagram - @Partridgeexteriorcleaning
Link for that awesome starter pressure washer here - jcb-tools.co.uk/pressure-washers/
A genuinely glowing review from me for it, I actually don't think there's anything in that price range that competes currently. I went through about £6,000 worth of various jet washes before upgrading to this final setup I have now. If this had of existed then, I would of saved myself lots of money and time for sure. Hope you enjoy the video and let me know if you enjoyed it as I have tons of other comparison/time challenge video ideas.
Comparisons are always good these days. Reviews are often tainted by idiots not understanding what they've bought, how to use them properly or can't be bothered reading instructions before buying or prior to using the kit (especially on Amazon. Last one I saw last night was “smaller than expected.” Dimensions were on the listing so one can only assume their measurements were 50% bigger than everyone else). #devolving evolution.
@@akmothman843 just got given the jetwash to make a vid out of, didn't want to do a generic product review so decided to put it to the test instead
@@PartridgeExteriorCleaning ki
@PartridgeExteriorCleaning I hope everything is going okay. I really miss your videos. Hope you all are doing okay and that the girls are loving their little baby so much!
Hi , good vid. when I saw the jcb name and price I thought Wow might be the one for me. I want a machine to clean tracked plant machines and my muddy yard but if I'm to buy a machine why not get one to clean drives etc and have another string to my bow. I use stihl, husqvana, Kubota etc. These are all the real deal and have the full back up of parts for their machines. I contacted a distributor of Jcb tools pressure washer and I also contacted JCB. JCB could only tell me that Jcb tools is on licence so they pay to use the name. They couldn't help me in any other way. The distributor could sell me the machine and offer a 3 year guarantee domestic or year commercial guarantee , the latter I thought was not a gift but actually the law. I was confused about the statement that it is fitted with a JCB engine! I don't think JCB make and engine like that. The problems that really stuck out for me was there is no parts list availlable and no direct emailing to Jcb Tools. I have rebuilt stihl saw that are 25 year old and haven't had any problems getting parts yet the distributor couldn't give me a parts list or order parts.
If this Jcb tools machine didn't have the JCB LOGO on you probably wouldn't have reviewed it and customers wouldn't be thinking they own a JCB machine.
I don't want to sound like I'm slagging it down, I want to buy a good cheap machine but I wouldn't recommend to anyone to buy a machine you can't email the manufacturer , you can't easily get parts and the name has been bought on liciense to sell the product.
People who are starting up and have very little knowledge of this type of kit are the very ones who can't afford to pay less.
I'm still looking and my yard is getting muddier so if you have any proffessional brands you know of , I'd be grateful for any info.
Bob
Generally speaking the main difference between commercial and consumer products is what is called duty cycle. A consumer product just won't be rated for use on a daily basis. My late mother used to buy £15 battery chargers for charging car batteries for electric fences. She kept moaning that they were failing all the time. I told her to get a properly rated one and they stopped failing.
for sure, the 3 year warranty with this is the key. and most new starters won't have enough work to be blasting 8 hours a day 5-6 days a week like me, by that time you can definitely afford a big big upgrade
@@PartridgeExteriorCleaning just to get myself off the ground i bought two $200 vevor corded pressure washers. once these ones die ill upgrade to a proper machine
@PartridgeExteriorCleaning the warranty is actually only 1 year commercially and 3 years for home use. So, it's not quite the fit you would need i think.
i'd rather buy a new $1k washer every 2 years for 30 years than 1 $14k washer that has to last me
@@velocityfpv5231 So you would prefer to work one day extra every week, or accept that you earn 20% less, which is way more than 14 grand.
That is impressive for a £1000.00. Does Cameron have a TH-cam channel? I sincerely hope he makes it and wish him the best in his business.
I want him to make one!
One of your US fans here from Akron, Ohio. I love your willingness to support other businesses with your knowledge and encouragement! I also love that you and Ben from Flawless Cleaning Services rely on each other for advice from time to time. You two are the only pressure washing channels I subscribe to.
I was recently watching some of your older videos, and in one you explained how you got started in the business. I think it was the one where you were cleaning for your very first clients, and how your business grew from there. I wish you continued success and happiness.
Hi Sid, great video as always!
So I'm a gardener and sometimes my clients ask me to do some pressure washing for them, and it will be great if you could do a video how to use the chemicals like black spot remover, etc. correctly?
And good luck to Cameron! :)
will do! I'll do a trade hypochlorite vs some store bought stuff soon
That would be awesome sid cos my grans drive has spots that came back after I first washed it
As always, your integrity for the job shines through!
That was different but informative. Hope Cameron's business goes from strength to strength. Will follow if he appears on youtube
would absolutely love to see comparisons of pressure washers, hoses, ect.. and let people decide if they're ok with spending double or triple the time for like a tenth of the price, or things like that
The problem with replacements is the time and effort you go to and the money that passes you by while you're waiting for the replacement.
Thank heaven for Cameron, he's a star, guess you 2 will be needing a wetsuit 😂
I think the microphone needs one too haha
haha yeah it was a wet one that day xD
I've actually got this machine great little starter model. My only problem is starting the machine sometimes it can take a few minutes to get going but once going it's a beast. Other problems you'll have is moving it around to a back garden with poor access as the wheels make the machine really wide for most alley ways. I actually got some wheel ramps for my van to make it easy for on/off movement. But overall really happy with it.
Try the pressing the trigger down on the lance when you pull start it, more often than not it is just air pockets in the hose so it struggles to prime properly, all my previous pullstart machines did it from time to time. - yeah camerons got some ramps with his one, it's definitely pretty heavy for one guy to lift in and out without ramps
@@PartridgeExteriorCleaning cheers was thinking of trying that for tomorrows job. Keep up the good work and vids 👍
Would U rate this better than a honda gx200
A great and fair endorsement and advertisement for JCB! Companies would do well to keep sending you things if they truly believe they have a good product!
Love seeing Cameron as usual!
I got mine from FFX tools. But they don't stock them, they order them, so shop around.
I hope everything is well Sid with your family and friends. We miss your content though! We hope to see you back soon
I wish Blessing's to you and your family for your kindness and caring . You are Awesome !! Loved the video and looking forward to the next .
thank you that's very sweet!
Thise companys need the testing and feedback to find out how it truly works and whats posetive and negative and what needs to be impruved so they can create a great product so it is worth it to them to send it so win for them,win for Cameron who gets a much needed tool for his work,you win by not only getting vidio done but doing testing as well as work done with a bit of fun with friend😊
A very comprehensive review !
Hope things work out for Callum, starting a business just lately is tough, the cleaning industry seems to be saturated with new starters.
Hopefully with guidance from you, Sid, he will make a success of it !
I'm getting old. My initial thought was you can replace your £1000 pressure washer 14 times...
And I thought it was comparing 1000 _pounds_ of pressure vs. 14000 _pounds_ of pressure.
? 🤷♀️
What can I say? I haven't had my coffee yet.
@@cindyknudson2715at that point add a bit of abrasive and you have a mobile waterjet cutter rig!
But it’s also a lot of jobs that would be cut short and split into two sessions, maybe two days. A lot of schedules that will slip.
Hi Sid, interesting comparison. Maybe you could compare a home karcher setup to the JCB to show why it's good to get professionals in. Just an idea.
good idea, think a standard karcher would probably be 5-10x slower
I went through loads of karchers cleaning motocross bikes then bought Parker petrol one about 190 pounds far better quality and power
Brilliant review I’m looking at setting up a jetwashing business and that’s just helped me pick my first jet wash I’ve looked at so many over the past week but this definitely looks the best for money 👍🏻
I’ve been getting really confused looking at different pressure washers around £1000
So much good advice for newbies in this video! Thanks for sharing guys 😊
Great test, impressive machine. Will be interesting to hear how it holds up over time. I enjoy the testing channels so if you can afford to spend time testing products I would be interested in watching that.
I would love to see the flat surface cleaners, I’ve watched a few people do cleaning jobs on here and some of them seem very streaky, but I can’t tell if it’s equipment or technique.
most of the time its technique, just doing straight lines on some surfaces will cause it hence why you'll see me do circle motions on nearly everything apart from blockpaving. other times it's dodgy jets or just going too fast. I will grab a cheap one and compare it to my one though for sure
It would be even closer if the second half did not have the grassy bits.
But as mentioned by others, the price mostly reflects quality-of-life improvements. Speed is mostly down to what work needs to be done and how good you are at your job.
Hope all is well with you and yours.
Yep, getting one of those JCBs, no brainer!
Hi Sid, I hope that all is OK with you and your family? It's been two weeks and no post!
Hi Sid. Well done for helping a new starter.
Cameron could mount a pulley on the side of the van opposite the washer and attach a piece of cord to the pull cord and through the pulley so it runs to the washer side. That way he has access to the fuel, choke and starter all on the same side.
Hope this helps him out.
I wondered about that. It makes sense to at least try it.
Generally pull starts can be unbolted and rotated around, mine pulled to the opposite-to-preferred side and just removing the bolts and rotating the pull assembly 90- degrees and bolting back on worked fine in changing the pull handle/grip to the other side of the machine.
Top work and thanks for the video take care
Great video Sid as always!
Great to see comparisons between kit of different values. The JCB is 1 year guarantee for commercial use but that's still good. I like it comes with quick releases. Just watch your insurance as some companies max out at 248 bar (3,600 psi)!
For the money it does look a great machine plus appears to have spares backup.
Sid, will Cameron be doing a TH-cam channel.
i hope so!
Great vid
I clean the occasional block driveway and have recently used a hyundai 15l machine for similar dosh (i rented mine)
The biggest problem i have is getting rid of the sludge !
Nice to see Cameron here, wish he has a good business in Manchester!
I hope everything is okay with you and your family been missing the videos and you. Praying all is well ❤
Turbo nozzle 200 bar vs Surface cleaner 300 bar ?
I'll definitely do a race between an fsc and turbo nozzle, actually interested in the result of that myself.
Very interesting Sid, I too thought that the time difference would be greater. You should start your own training school Sid as you have so much knowledge to impart. Always good to see Cameron. Hope that baby River is doing well? Take care.
Beginning to worry about Sid & family now.
interesting video to be honest…
I would defo be interested to see cheap lance vs expensive lance. I just cant see why there would be too much difference to justify the extra cost!
Looks a smashing machine, be aware of warranty though....
If you're using as personal machine at home its 3 year warranty.... Commercial use it is 1 year warranty.....
No shame in having a 1k machine especially if it will do a good job - maybe it will take a bit longer timewise but at least it could get someone started/earning ! Personally id like to see more videos comparing hoses/lances etc i think it would be beneficial to some of your viewers 🤔
That was very fascinating. Now come over to Florida and do some tests with USA equipment 😁
It’s quite expensive, it’s identical to my Kiam 3400P which was circa £700. I’ve been very impressed with it.
Getting quite worried now Sid. Nothing for a month! Hope all is well?
You might be able to unbolt the pull start cover and spin it round to get the cord in the position you need to pull it.
What chemical could you recommend for oil stains ? Preferably in small quantity purchase for average joe’s
Great video! Yes cheap vs proper comparison vids would be amazing!!! There are other videos or there from good channels but they aren't pros in pressure washing like you are. You set up your recommendations list and I'll buy lol
Hope everything is ok at home and work. Getting abit worried as no video for awhile. Hope its just because your to busy or your taking time out. ❤
a fellow South African in the video. hope his business is doing really well my bru ❤
Sid, Please do a flat surface cleaner comparison. I’m about to buy one and am struggling with which to buy.
Brilliant, Jcb machine did very well. Good vidro 👏👏👏👏
When are you going to be getting a new video out. Hope all is well ❤
Pick the weeds out and you could put it in a rizzla mate LOL 😂
I love Cameron’s weird Sef Africawn vowels :)
Been 4 weeks since you've posted a new video. Hope all is well.
good one
fair product
I'm very impressed with the JCB 460cc engine. i brought to replace my Honda gx390.
The job 460cc with key start 😬 powers my ws201 pump with ease.
Can the pull start cover not be swapped over. Just spin the plate around
Hello Sid... you have not posted in about a month or so. Hope all is well with you and your family. We miss you!!!
I started with a 12lpm from machine mart never let me down in 2 years and was £500
not bad 750 ish if shop around though
Hey Sid how you doing buddy Great to see your back online after the birth of your son congratulations. I wanted to give you kind of a heads up and I'm not saying in any way that you wouldn't have already figured this out yourself but just in case...
I used to work for an environmental company and we did hydroblasting inside of Mills. It's important to know what the business is doing for its purpose before you go in and clean. Always make sure you check with your government or your state the agency that governs the laws and regulations of industry. For example, we went into paper mills and their Mill rights would set everything up that they wanted to have cleaned and we would clean it. However once we were done cleaning it we had to throw all of our PPE, or boots, everything that was in that environment had to be burned. We were not allowed to take it out into the community. So that is my point, it'd be great to get industrial jobs but you need to know ahead of time what that company does for a living, where are the dangerous environments, etc.
One more thing I would like to point out to you maybe it doesn't matter in this instance cuz I'm looking at a sign I think says molasses but anytime you're standing in front of a tank that has shut off valves. Never put your body in front of them. They may look innocent or they may be under high pressure. You just never know. Anyway take care of yourself, and know that your viewers will always have your back. Peace
Hi Sid, is everything ok? You’re missed.
It’s weird. When I heard his name was Cameron I was like hey mine too. Then as soon as he said howzit guys I was like hey is he South African? So am I. And he’s living in the UK? So am I 😂
just reposition the pull starter so its facing the same side
Great video Sid, would love to see you review a £100 flat surface cleaner. Thinking of getting one for home use with my Nilfisk pressure washer.
I’m in Manchester, can I have a link to Cameron’s Facebook or website. Good video, thanks Sid x
Very impressive machine, my 15lpm machine is from pws
My 21lpm is an evolution honda gx390 and its a massive difference in performance.
Definitely want to see more comparison videos, the FSC and lance would be a great help.
Jesus i had the exact same problem starting mine. I was so embarassed. It was just sat there struggling.
Theres two levers you need to slide over ASAP you got it running.
One is the cold start slider, the others like the old rabbit/tortoise thing from the old petrol mowers....
You can unscrew the pull start and rotate it so it's facing the exhaust side. May save him walking around the van each time
Thanks for another great video! Best of luck, Cameron!
Have a similar Honda machine on my employer supplied truck and a bloke on the same job with his own own employer supplied truck said his didn't work properly. He got it started alright but he left the choke on so once going to the machine was coughing and spluttering and using fuel at an alarming rate. He said he knew all about these pumps but clearly he didn't. I told him to turn the choke off but he refused to do that and so the machine kept on coughing and spluttering and not providing pressure sufficient enough to clean anything.
Good news, it's a Hyundai with AR pump... Great value machine and fully repairable... Better of the budgets
Hi Sid. I have been wondering if you could show us why the Surface Cleaner nozzles would break when you try to clean permeable tarmac/black top...?
I saw a video where a business was doing a cleaning job in wa, usa. He showed how his Surface Cleaner kept getting destroyed by the permeable tarmac.
A question I have about it is; would the Surface Cleaner still get destroyed if the tool were _not_ connected to a collection drum...?(which was on his trailer...)
(The title is: "reclamation pressure washing-cleaning pervious concrete" video creator is Mechanized cleaning solutions inc.)🙏
I’ve got the Evolution pressure washer and it’s amazing. Just remember always squeeze the trigger after use and not connected to a water feed and that will empty the pressure valve and prevent it from splitting in the cold as I’ve been through a few.
Any thoughts on the Wilks pressure washer? Sure I’ve seen it in some of your vids……
I genuinely love watching your videos I actually look forward to the uploads because you bring so many different jobs and you have such a likeable personality. Great videos sid & props to you for helping somebody start out especially when it's hard enough as it is!!❤
Sid, saw a guy carving a pumkin with a pressure washer.. you could recreate it for tiktok or reels?!?!
Happy hallowe'en to the team, and welcome back Cameron! 🎃
You might have been looking at one of Syds early videos. He did one with pumpkins.
Can you test out a Titan pressure washer
think you have just sold me a JCB pressure washer mate 😂 ive been looking at the slip stream pro20 but thats 2k pluss what a bargin this beauty is quick question if i got a surface cleaner do thry all just fit to the lance handle or would i need a specific one mate great work keep it up
I looked at the JCB before buying the Slipstream Pro 20 in July this year.
If you can, I would advise to stretch that little bit more and get the 20 (or an equivalent Honda GX390 engine) if you are getting it for a business (as opposed to simply using it on your own property).
@@kevinwall795 ahh did you what pushed u to the pro20? looks a good machine the jcb one for 1k and about 1.5k cheaper than the pro 20 im a window cleaner looking to branch out and offer pressure washing and gutter also just abit hesitant to get a pressure washer due to the costs of machines thanks for the advice mate
your surface cleaner will just need to have a quick release female fitting on it - it doesn't matter which surface cleaner you go for as they can all be fitted with that fitting on purchase usually, best to head into a shop where you can grab those in person so they can sort it all out for you
Thanks sid@@PartridgeExteriorCleaning
Where ya gone??
Missing you sid & co, haven't seen or heard anything from you for a while now, hope you're well and doing OK 👍
Did your wilks 750i have a unload valve and if so did you need to set thanks
It’s not just business users who watch, a lot of us domestic users would be interested in seeing what would be a good investment in these types of machines - ones which will do a really good job and won’t suddenly let us down, for an outlay of a little more money
That was very interesting to watch and the machine was the quality you’d expect from a company like JCB, good to see they’re still innovating
By far the most important thing is serviceability, parts availability and easy access to expertise when, not if things break. Buy cheap buy twice, but buy expensive is not always better either.Take Miele appliances for an example; very expensive to buy and shockingly expensive to repair.... I'll be sticking with my Kranzle thanks...
That's a blast from the past. I grew up near their first factory in Rocester. Hadn't thought of JCB in years until that bright yellow appeared.
yeah i had no idea they did pressure washers till they reached out
@@PartridgeExteriorCleaning neither did I. I thought they were excavators and the brother did agricultural kit if memory serves. Mind you the factory in Rocester was more or less built on a swamp which reminds me of a Monty Python sketch. That said they did create some good fishing lakes back in the day
@@garyjefferies6763 if they make agricultural machinery I can see the pressure washers make sense. for one if you work on farms there is a lot to clean often. (mainly with life stock) plus what they make already uses like 90% what a pressure washer needs.
@@sirBrouwer JCB and Bamford Agricultural are or were two separate companies run by brothers. I see what you mean about farm needs, though. Might be the JCB engineering was better suited to the pressure washer construction and their set up might be why it can be done at a lower cost than most
@@garyjefferies6763 that mainly. plus I have the idea that they prefer that people just keep coming back do to the quality. in doing so they will likely be ad ease to buy the more expensive items as they show that the quality is always good.
Now I'm no expert but that was damn impressive for a machine in that price range with a 15 litre flow rate to be just over 2 mins slower than your expensive setup is phenomenal, I only pressure wash my drive or my car so I've got karcher k5 pressure washer not sure of the flow rate but it's powerful enough for me.
Hi from Canada! I'm a start up power wash company still going through those startup struggles. 😅 Even launched a youtube to document it as well! 😅
I also just picked up a unit that has this same pump. And i ageee that its been a fantastic and reliable pump!
Very good test Sid. Great as always to see Cameron. Thank you Cameron & Sid
I'm impressed shame its trapped pressure unloader Italy pump to good for the money but personally I would build up a pressure washer if I was on a cheep
Top man Sid for helping Cameron out. Starting up is a challenge at the best of times. Hope he gets squared.
What a great machine, I own a JCB Compound mitre saw that I use for DIY and its been a brilliant bit of kit, probably my favourite bit of kit that I own.
Hiya Sid, long time no comment, LOL.
Love the review and definitely I’m going to be purchasing the new JCB Jet Washer, based on your review, but now all I need for the kit would be the carbon fibre holes, hoses, flat, washer and rotary nozzle. What are your thoughts on being able to purchase these items and where from could you recommend the set up for the home user, who just wants to keep his own place clean, still following still loving still in your corner.
Jackie’N’John.
4:20 Looks lovely, seems a shame to use it! 😊
yep they don't stay shiny for long in this job!
is that JCB from heavy machines?
Amazing 😍👍
Приветсвую тебя Сид.
Хотелось-бы узнать какую химию ты используешь для обработки поверхностей.!?
Super interesting and I would definitely get that machine after seeing that. JCB done a good job with that power washer
Sid, so great of you to help a guy out. My mum would have called you a good dooby. Not sure what that means literally but it means you have good character. ❤❤
Hi sid.how's it going and another fantastic video well done and keep up the great work and what an nice bit of kit