Still a newbie but am deploying for a couple of months and was told to install this to my boat battery so that it wouldn’t lose its charge. Do I just connect this onto the battery? Battery is new. Not sure if I’m supposed to charge this charger first before connecting to battery. Thanks.
I Have the Gen 5X2 with 2 AGM batteries. Can I connect the negs of each battery together? The charger doesnt seem to connect the negs internally thru the charger is why I am asking. I am using battery isolator where the grounds would be connected together.
My genius gen 2 went out and doesn’t charge two of the the four banks. Only had it a little over a year. I saw reviews and they said that it’s a common problem with that model. Like you said in your video it’s plug and play with no buttons or options. So after watching your video I’m gonna get the GenPro as well to replace that one. How do you like it so far that new charger.
I had to lengthen the charge lead on 1 bank as my cranking battery is aft and TM batteries are under the bow. NOCO states you must cut and splice after the in line fuse and use the original terminals to the battery.I also used 8 Gauge wire and heat shrink butt connectors for the
I have a genius pro 4 bank,I have sent it back for replacement 3 times.i don't recommend this.go with a minn kota
Good luck with the warrant - they make you pay shipping and if it’s 2 years you also pay $133 for a replacement
That battery compartment looks way to clean.
If I’ve got two batteries connected together do I still use a novo dual battery charger or will a single unit charge both batteries?
where you not supposed to unscrew the lead battery screws at the top to help it breath? just curios
Great vid probably a senseless question but I’ll be running 2 LiFePO4 12v in series for my Ulterra can I use the Noco 5x2 charger in the set up
Still a newbie but am deploying for a couple of months and was told to install this to my boat battery so that it wouldn’t lose its charge. Do I just connect this onto the battery? Battery is new. Not sure if I’m supposed to charge this charger first before connecting to battery. Thanks.
Can you have a solar controller on the batteries simultaneously? Getting charge from your solar panels? Or is it one or the other?
I Have the Gen 5X2 with 2 AGM batteries. Can I connect the negs of each battery together? The charger doesnt seem to connect the negs internally thru the charger is why I am asking. I am using battery isolator where the grounds would be connected together.
My genius gen 2 went out and doesn’t charge two of the the four banks. Only had it a little over a year. I saw reviews and they said that it’s a common problem with that model. Like you said in your video it’s plug and play with no buttons or options. So after watching your video I’m gonna get the GenPro as well to replace that one. How do you like it so far that new charger.
I just bought my first bass boat and got the Noco charger. I appreciate the video! Definitely helpful! Thanks!
sweet garage set up , everything is organized and clean. Just got Nolo charger for my boat so this helped, thanks.
I had to lengthen the charge lead on 1 bank as my cranking battery is aft and TM batteries are under the bow. NOCO states you must cut and splice after the in line fuse and use the original terminals to the battery.I also used 8 Gauge wire and heat shrink butt connectors for the
I just ordered one from Amazon, your video was helpful. Thanks !
Good show
does the charger battery selection mode stay selected after you unplug it then plug it back in?
Can I parallel/join 2 of the 3 ports for higher charging current?
Good video, much appreciated. Curious how long the battery connection cables are? 72" or so?
Do you leave NOCO plug in even after battery are fully charged?
So after a year or so how would you rate it’s performance?