Epson Ecotank ET-8550: Fixed Error: 034004 Printer working again 😁
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- On my Epson Et-8550 I was receiving the error code: 034004. A belt that turns the gears on printer came loose and was preventing the printer from working. I reattached the belt back on. The error is gone and printer is now working normally again.
-------------------------------------------------------------------------- Website:
www.hangrymusc...
Was able to do this and it fix the problem thank you
What screws did you remove for this im having the same issue 😭
hey! I was hoping you could help me with a problem with me et 8550, the white layer isn't printing at all and I followed all your set up instruction videos to the T (thanks for them by the way!) I'm at a bit of a loss, everything I've tried hasn't worked except for when I switch the color settings so that it prints the back layer over the color as black instead of white. I'm using DTF Pro inks
Hello, No prob! In Acrorip set your channels to KWCYMW and in the ink reservoir tanks I have WKCYMW. Not sure if its a bug with Acrorip or the printer.
Awesome 💪🏽💪🏽
Yes! 💪💪
Do you recommend updating firmware on the printer? I just got this printer and it's recommending new firmware
Hi, not sure but mine is updated
My printer is getting a 000025 code. It looks like my printhead cannot go over the capping station. The capping station seems a little more elevated than usual. Can anyone help, please?
All of a sudden I got a 000031 code ( paper jam) but there is no paper in the printer.......now it's giving a 000025 code.......any suggestions?
What were you doing prior to the errors?
@@HangryMuscle it was working fine, I stopped printing to go get the kiddos from outside, came back and the print head was stuck to the far left......I've been getting the same 2 codes....if it stops on the left, 000031......if it stops on the right, 00025
Its catching on something
that is good
Yeah it is 😁
I just received this same error. I removed 2 screws (one inside; one on the back) so I can get to the belt, but I'm having difficulty taking the side off and i don't want to want to make things worse. Please help!....thanks
Hi once you unscrew the screws. The next to screw inside the printer where the black piece meets touches the white side panel. Take a flathead screwdriver and push it in gape between the two pieces, the side panel will pop off.
Did you remove the belt? Or what was the step?
I put the belt back on
How did you removed that side cover?
Remove the screws then pop it off the tabs
hi my paper is not feeding and the springs hav come off, do you know hown i can remove all the covers?
By removing the screws and the unclip the side panels clips.
@@HangryMuscle HI Thank you for your reply, i have managed to remove one side, do you know how i can remove the
other side?
@@HangryMuscle what i meant to say is the other side of what you took off, the right hand side panel
Same as the other
@@HangryMuscle thanks i have managed it, trying to put springs back in, what knighmare
Error #031002 can anyone help!!! 😩please
Most Errors codes are generally caused when something prevents the printhead carriage from moving smoothly.