Thank you very much. This helps a lot. The shitty java program isn't working on my computers so I have to edit it directly. But it's easy and fast too.
Hello, thank you very much for the Tutorial, Do you know if with this I can Automate Plugin parameters too? I mean somehow asign the Faders to control other parameters rathen than volume.
Thanks very much for your video. I want to use my bcf to control the cc channels. So your guide is perfect for that. But how can I install the BCF 2000 in Logic? There is no signal in logic. Best wishes!
Hi Katharina thanks for your comment, and I am not too sure why your BCF2000 isn't working with Logic. By setting the MIDI CC controls on the unit that means they are set in the device itself and should be able to work in any DAW. I am not much of a mac guy and can only theorise some solutions so apologies if these don't work. Before you try and of the solutions try and see if any MIDI data is being picked up into logic first, sometimes devices are sending MIDI data, but not the correct type. If that's the case then you might need to watch the tutorial again and set it up. Make sure too, you are holding that first button to get to the right protocol and make sure you are saving it currently when you program it. I am sure you are, but trust me, even I forget to save or program it wrong more times than I like to admit. Try downloading the MAC Drivers for the unit which could be found here www.behringer.com/product.html?modelCode=P0246 Try updating the firmware too as that may be causing issues. try plugging the unit powered off first into your mac then switch it on after. Try a different USB Cable. Try plugging it directly into the mac WITHOUT a USB Hub, if you need a USB hub maybe try another one and plug the hub directly into the computer. Let me know if any of these work please!
Finally, I can find someone to show me how to use CC for my control...but after I assign CC to my fader and save it, then how can I control it..? is there anything I have to do on logic?
Hi friend, everything is perfect, thank you so much for this video. I have one problem. When I put it in mixing mode for cubase, when I move faders and buttons it triggers midi notes. I tried different modes like U1,U2, U3 but it still triggers the midi notes. Do you know how to solve it? I have realized that when I switch off my midi keyboard it stops triggering the notes. THANKS!
I have a problem, because seems like is detected on my Cubase, but only works one way... If I move a fader on Cubase it will move on the BCF2000, but if I do it in the controller it doesn't do anything on the software. Do you know why?
Just bagged a bargain BCF2000 so this tutorial will come in very handy. Thanks Ryan!
Thank you very much. This helps a lot. The shitty java program isn't working on my computers so I have to edit it directly. But it's easy and fast too.
Hello bro. Please help me out here bro. How can I used two BCF together
Hello, thank you very much for the Tutorial, Do you know if with this I can Automate Plugin parameters too? I mean somehow asign the Faders to control other parameters rathen than volume.
Wonderful! So thankful for this. Do you use OSX of Windows? Got any issues with USB mode?
Excellent! A huge Thank You!
Saved me so many Hours
thanks homie! great kick start to controlling my jv1080!
Thanks very much for your video. I want to use my bcf to control the cc channels. So your guide is perfect for that. But how can I install the BCF 2000 in Logic? There is no signal in logic. Best wishes!
Hi Katharina thanks for your comment, and I am not too sure why your BCF2000 isn't working with Logic.
By setting the MIDI CC controls on the unit that means they are set in the device itself and should be able to work in any DAW.
I am not much of a mac guy and can only theorise some solutions so apologies if these don't work.
Before you try and of the solutions try and see if any MIDI data is being picked up into logic first, sometimes devices are sending MIDI data, but not the correct type. If that's the case then you might need to watch the tutorial again and set it up.
Make sure too, you are holding that first button to get to the right protocol and make sure you are saving it currently when you program it. I am sure you are, but trust me, even I forget to save or program it wrong more times than I like to admit.
Try downloading the MAC Drivers for the unit which could be found here
www.behringer.com/product.html?modelCode=P0246
Try updating the firmware too as that may be causing issues.
try plugging the unit powered off first into your mac then switch it on after.
Try a different USB Cable. Try plugging it directly into the mac WITHOUT a USB Hub, if you need a USB hub maybe try another one and plug the hub directly into the computer.
Let me know if any of these work please!
@15:08 you mention "Dynamics"... But WHICH CC# is that?
HI MAN CAN YOU SHOW AS HOW SETUP IN REASON 13 PLEASE
Very helpful Thankyou
Hello i thought you will show us on how to connect Midi instruments to it using Midi in and Midi out
Hi bro. How do you get all the LEDs on the knobs to light up?
tks
I think the MIDI cc command was messed up on some of my buttons and causing an issue. Hope this info helps me. Thanks
Update my bcf is now functional like my second one. I’m so greatful for this video. Back to mixing how I remember
Finally, I can find someone to show me how to use CC for my control...but after I assign CC to my fader and save it, then how can I control it..? is there anything I have to do on logic?
Hi friend, everything is perfect, thank you so much for this video.
I have one problem. When I put it in mixing mode for cubase, when I move faders and buttons it triggers midi notes. I tried different modes like U1,U2, U3 but it still triggers the midi notes. Do you know how to solve it?
I have realized that when I switch off my midi keyboard it stops triggering the notes.
THANKS!
Do you know how to solve it?
can this be customized for Virtual DJ? I own one
is the cc with protools 12 works ?
Hey! the Continuos controller (OR CC) is built into the virtual instrument and is pretty universal. so Im 99% sure, yes!
@@RyanPetersMusician i just bought it and yes it's working in protools 12 in CC mode
Hello, can you help me how to program bcf 2000 to midas mr 18? I will be very grateful.
I have a problem, because seems like is detected on my Cubase, but only works one way... If I move a fader on Cubase it will move on the BCF2000, but if I do it in the controller it doesn't do anything on the software. Do you know why?