Micro FPV Flying Wing

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024
  • SUPPORT ME / pawelspychalski
    FPV University NEWSLETTER sendfox.com/fp...
    Micro flying wing bit.ly/2O5UuMl
    RC airplanes do not have to be big and bulky. This 47cm wingspan flying wing weighs 70g with a battery and FPV camera and you can fly it anywhere you want to.
    Micro FPV flying wing from quad parts • Flying wing from tiny ...
    Light, small, and super fun to fly. This build is fully manual. There is only a AIO analog FPV camera and transmitter, Express LRS receiver, BEC, ESC, motor and propeller. And of course, 2 2g servos. It is, however, possible to add a flight controller to this design. It will be slightly heavier, but will have stabilization. And I think you can even add a small GPS to have real RTH function.
    #fpvuniversity #rc #flyingwing

ความคิดเห็น • 37

  • @FPVUniversity
    @FPVUniversity  8 หลายเดือนก่อน +1

    Micro FPV flying wing from quad parts th-cam.com/video/N1RWrUMis8Y/w-d-xo.html

    • @TaseenAli
      @TaseenAli 8 หลายเดือนก่อน +2

      Can you make a video about inav on aios ? I got a bunch of half broken aios with 1/2 escs busted but others are working fine! Would be great reuse for mini wings like this ! 🔥🔥

    • @yohfpv
      @yohfpv 8 หลายเดือนก่อน +2

      @@TaseenAli I'm also interested in the answer. Got a sad AIO sitting around doing nothing.

  • @swissfreek
    @swissfreek 8 หลายเดือนก่อน +9

    I think once you get smaller than about the AR Mini or Nano Goblin (let's say, less than 600mm or 24" span), you very quickly start to make a lot of compromises that aren't much fun. No wind. No digital. Tiny battery. Limited options for motors, props, ESCs, etc. *Very* sensitive CG. It's a neat challenge to say you can do it, but I don't find it very fun to fly and everything has to be just right.

    • @shadofpv
      @shadofpv 8 หลายเดือนก่อน +1

      I completely agree, i rc converted a lidl chuck glider 460mm with fpv and tbh like you say, there are a lot of comprimises, although i still managed an fc , full elrs rx, 868 antenna and osd ;) 114g :)

    • @dooddrones6521
      @dooddrones6521 8 หลายเดือนก่อน +3

      Not true at all!!!
      I've been flying LDARC 450x planes for about a year now and the only compromise is that you can't really fly it on windy days. I'm flying with HD Zero and even with crappy antennas I've been able to get 1.5 miles out. My max flight time is just over 24 minutes on an 1100mah 2s lipo. Flying weight is 160g.
      The setup:
      LDARC 450x Airframe
      FC designed by me (Drop in replacement for stock, F405 running an iNav6 target I made for it)
      3.7g Servos
      1207 5000kV motor
      4024 Prop
      Spedix ES20 Lite ESC
      Crossfire Nano Rx
      NewBeeDrone M10Q Micro GPS
      HD Zero Race v2 VTX
      HD Zero Nano Lite Camera

    • @joeljonker990
      @joeljonker990 8 หลายเดือนก่อน +1

      ​@@dooddrones6521I I fully agree with you! The 450X is really a nice platform and performs really well. Mine is running the original FC01 but upgraded to a 1404 @6000 kv running 3S on a 4" prop (step-down converter for the FC). About 3 minutes runtime with a 3S 450 mAh but it's really fast, stable and nimble. Unfortunately, they are less available and to expensive.

    • @dooddrones6521
      @dooddrones6521 8 หลายเดือนก่อน +2

      ​@@joeljonker990 Sounds like you turned it into a nice little race wing. And yeah. I've emailed LDARC from 2 of my email accounts stating that they should produce them again. Maybe if more people ask for it they would make it again. Especially with the FAA attempting to pull this BS.
      Only place to get them right now is aliexpress and with shipping the kits are about $50 a piece

    • @theoztreecrasher2647
      @theoztreecrasher2647 7 หลายเดือนก่อน

      @@dooddrones6521The only advantage that this DF Ghost Wing might have over the LDARC TinyWing 450X is the slightly better durability of the black EPP. We were (eventually) lucky when Bangers was getting out of its Oz warehouse a couple of years back. When trying to add another PNP version to our inventory we kept getting sent the 2 pieces Kit versions - obviously the shysters were trying to clear their surplus stock that nobody wanted at the time.
      So, with the correct ones we eventually scored, we have plenty of spares which have never been needed. The small size and light weight makes it pretty hard to damage them and the flexible props seem to be indestructible. And you get 10 props with each shell!
      The Plastic FPV canopy was the major useful upgrade on the later versions we got - MUCH more room than on this little fellah!
      Currently we are trying to set up the stock FC that used to come with this (received in a Glue-and-Fly SU-27 kit from HeeWing) when Health, Old Age and Apathy can be held at bay.

  • @0gnob
    @0gnob 8 หลายเดือนก่อน +3

    Ive built one recently with a Matek f411wte fc and it flys 15 minutes on 750mah 2s. Full inav functionality and a lot of fun, but its a bit heavier but the stabilisation means its still controllable even in pretty strong winds.

  • @funkynerd_com
    @funkynerd_com 8 หลายเดือนก่อน +2

    I prefer the LDARC Tiny Wing which is about the same size, but has way more compartment space, and are almost half the price for a PNP. Lots of guys are putting iNav in them too.

  • @Aspir3
    @Aspir3 8 หลายเดือนก่อน

    Paramotor next, please! :)

  • @dooddrones6521
    @dooddrones6521 8 หลายเดือนก่อน +2

    I ordered one of these a few months ago but it's just been sitting in my closet. I just can't get away from these LDARC 450x airframes. They're too good!!! The only problem is it's discontinued and very hard to find.
    I actually designed an FC that's a drop in replacement for the stock one. F405, running an iNav 6 target I made for it (I know I know, I need to upgrade to 7).
    Once I'm done with revision 2 (Extra servo outputs and a 9v power rail on a pit switch) I'd like to send a couple to you for possible official support.

  • @allscalerc
    @allscalerc 8 หลายเดือนก่อน

    Awesome video! I just suck at flying 🤣. I just subscribed to your channel.

  • @TorstenBecker
    @TorstenBecker 8 หลายเดือนก่อน

    the biger the better 😁

  • @Newtoon
    @Newtoon 7 หลายเดือนก่อน

    if you have some wind anyway, a FC like CC3D (mine) , with librepilot) does the job th-cam.com/video/mxrmn2RD-dg/w-d-xo.html . Not that there is no FIN ; the wing is akin to a HORTEN in its profile and lift distribution. It lacks a bit of pitch with roll autority and I had to add transparent plastic sheet for increasing that otherwise, I can't turn sharp without loosing altitude. Use a 6 blades prop to get very quiet and you can fly in any park even with people around since there is no danger at all (mine is 80 gr AUW)

  • @WinstonSmith1984
    @WinstonSmith1984 8 หลายเดือนก่อน +1

    It's probably most fun in the evening or at night when the wind has settled.
    Those AIO camera lenses have a weird sort of distortion though causing objects to change a lot in size depending on where the lens is pointed. I've tried them before but I couldn't fly properly with them because it becomes very difficult to estimate distance and speed in FPV. The cameras on modern whoops and 2 inch quads are much better, coupled with a separate tiny VTX.
    Also, with a mixing video receiver such as in the Skyzone goggles, wouldn't it be better to use a dipole antenna on the VTX and 2 dipole antennas at 90 degrees offset on the goggles receiver? You'll save weight and vulnerability to damage on the airplane, and my guess is you'll have better reception too.
    It'll be interesting to see if you can INAV to it. There's hardly any space for a FC.

  • @ravindupramod5998
    @ravindupramod5998 8 หลายเดือนก่อน +1

    Try to bulid this thing since 2021 still didnot able to complete 😅

    • @24kJames
      @24kJames 7 หลายเดือนก่อน

      ME TOO! I can't get my matek elrs>sbus converter working.

  • @egor5622
    @egor5622 8 หลายเดือนก่อน +1

    could you please share full set up of this little guy?

  • @MCsCreations
    @MCsCreations 8 หลายเดือนก่อน

    Sweet! Looks like a pretty fun little wing! 😃
    Thanks, Pawel!!!
    Stay safe there with your family! 🖖😊

  • @ChainsawFPV
    @ChainsawFPV 8 หลายเดือนก่อน

    I want one!!! This would be a blast with a bunch of people in the club flying them at the same time.

  • @boactech3076
    @boactech3076 8 หลายเดือนก่อน +1

    I have one with inav flight controller 😎

    • @JPspinFPV
      @JPspinFPV 8 หลายเดือนก่อน

      Which FC did you opt for in your model?

    • @boactech3076
      @boactech3076 8 หลายเดือนก่อน

      @@JPspinFPV Noxe F4
      And beta fpv video transmitter
      And a little gps receiver

    • @patricehonvault2612
      @patricehonvault2612 8 หลายเดือนก่อน

      Too small to fly properly, you need jedi reflexes to fly!

    • @boactech3076
      @boactech3076 8 หลายเดือนก่อน +2

      @@patricehonvault2612 with lower rates and fpv camera it is really fun.
      In the beginning with angle mode helps a lot to learn 😊

  • @chemistt
    @chemistt 8 หลายเดือนก่อน

    Ok so, Ive build a similiar wing but white one with vertical stabilisers. Ive fitted it with 16x16 FC running INAV, smallest no name GPS I found and the usuals. The main point is I gave it 3500mAh MJ1 LiIon battery and a step-up board for FC to have 5V. It has RCinPower motor 1207 - 7500kv spinning 3.8x3x2 prop. Flight time.........IDK......I never did fly it long enough to figure out but once it was close to 37 minutes.............I think....it was as fun as ECO-RALLYE because after throw you were changing thr like in range of 90-100% only and could not really do anything but carefully turn haha

  • @mauritz1774
    @mauritz1774 6 หลายเดือนก่อน

    Look, there is an small 3D Print RC Wing on thingiverse, with Ribs and 1-Layerbflap to fold over. Powered with 1206Motor

  • @sullytrny
    @sullytrny 8 หลายเดือนก่อน

    I think small will be a thing next season

  • @Videolinquency
    @Videolinquency 8 หลายเดือนก่อน

    I flew a different one in the same weight class a few years ago. Great fun, but don't try to fly micro wings LOS unless you have 20/20 vision!

  • @richiemillet697
    @richiemillet697 8 หลายเดือนก่อน

    How is the mixer settings in inav 7.0 for VTOL Tailsitter

    • @FPVUniversity
      @FPVUniversity  8 หลายเดือนก่อน

      INAV 7 do not support tailsitters, you have to wait for INAV 7.1

    • @richiemillet697
      @richiemillet697 8 หลายเดือนก่อน

      ​​@@FPVUniversityWhen is it coming

  • @Chris-vc1dh
    @Chris-vc1dh 8 หลายเดือนก่อน

    nice..