Danny I've just successfully swapped my 1999 V6 Mustang with a 02 GT engine in my car, I really appreciate all your videos! I couldn't have done the job without them, especially the cam chain replacement video. Thank You!
Appreciate it, I didn’t have the owners manual to check myself, just searched on yt clicked on the first one (yours) went and replaced all fuses. 03 gt sat for 5 years no start since, had it start up first crank.
This is a handy one for left/right ones too Window Motor Tear down, diagnosis, re-assembly Ford Mustang and other makes and models th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
@@b-bitter91 Fuse literally fell out in the floor and was under the floor mat. How this happened? Who knows. But it did. Popped it back in, and the windows immediately worked.
I haven’t had windows in the mustang for a week or so now. The weather took a turn for the worse so it wasn’t a big deal in the garage. Well, I got stuck taking that car to work this morning. It made it more of a necessity. Anyways, I climbed under and the first thing I saw was the large silver one for the windows and it was just dangling there. I pressed it up in there all the way and my windows worked instantly! I must have kicked it getting in and out. It’s good to know that was all it controlled and wasn’t really effecting anything else.
I just bought this car and everything works but the windows. I noticed the same big silver one #43 is missing in mine. I bought it but it isn't just a push in one? How do you get it in there?lol Be gentle, I'm an old lady 😂
It’s funny because I was trying to see where to put this fuse that fell out in my car, but didn’t put together that my windows weren’t working, so I checked this video to see where to put it & it was the last one covered on the “under the hood” fuse box !! Thanks brother 😂
I think you saved me ❤I have a "flash code" from THEFT light on dash... 1 long.... 6 short (repeat). Research tells me this is a blown PCM fuse and your video told me where it is. Sure enough... it is blown. Not yet sure if there is another issue that caused it to blow, but the aftermarket alarm sounded and then pulled the battery... later would crank but no start. Anyway, will swap with headlight fuse tomorrow and do some testing. THANK YOU!
Seems I have a dead short :( I swapped the headlight fuse with the PCM and I did not hear / see it immediately blow, but when turned the key to "ON" (not crank), the THEFT light began blinking very fast, as it did before. I pulled the fuse and it was blown. Do you know if battery must be disconnected prior to new fuse or something else?
HA HAAAAAA... I found it! A wire to Mass Air under fender makes a VERY hard turn around the very sharp edge of sheet metal and wire was grounded. The fuse would not blow, until the key was turned to "ON", and since that was the last place I was working, prior to failure to start... that was it. Thank you for your informative video's 🐈
Thank you very much for the very educational video, thank you for your very useful explanation and guidance, I want to be a salesperson and a responsible human being with my neighbor, soon I am going to sell my car and I want to be sure that its new owner has the box with the correct fuses. Thank you very much.
Thank you Danny for that video on the fuse box my horn stop working I couldn't figure out which fuse was for the horn sorry watch your video I put a new fuse in and it worked thank you again for the video
Danny, I had a no start/no crank situation and wasted a lot of time and effort on removing/testing the starter and clutch peddle safety switch. I watched this video and switched the starter relay with the #5 fog light relay and my car started right up! Can a relay simply go out sometimes or did something cause it to go out? My car is an '03 Cobra 10th Anny and has 31,500 miles and is basically stock except for a 2.8 pulley. Thank you for the videos and I enjoy your channel!
Thanks for this! Both my headlights and hi-beams have stopped working and I'm hoping to identify the issue with the help of your video!! While you're showing stuff... I feel really stup-pid for asking this....I've owned my 2004 for almost 3 years and still haven't found the control for the antenna (to raise and lower it)??? I've gone through the manual, I've been on the net, I've asked for youtube clips on it but have found absolutely nothing???? Help.........
Thanks for taking the time to film and post this. It’s tremendously helpful! You mentioned that fuse #9 is for the Mach 460 amp in model years 02-04. Any idea which one would be the fuse for the Mach 460 amp for a 2001 model?
Update on 1999 GT. After some troubleshooting. A Bussman 40 amp Max Blade fuse was assed up. I temporarily bridged the circuit and all my problems went away. However, my fuel pump does not want to kick in. It has a closed circuit at the fuel pump connector but the fuel pump does not want to kick in. Merry Christmas.
@@dannyjohnsonsgarage You are correct. But I checked the circuit the fuel pump and that probe does light up indicating there is current on that circuit. Although I don't know how many volts are actually going through the circuit. Nevertheless, the CCRM does, at times, make the fuel pump act up.
First off. You video have helped me out a ton. Second, Merry Christmas 2023. Here is my problem. Since the last time we have been in chat, I have managed to get the GT cranking, starting and moving. However, recently, I have been getting fuel delivery problems. Here is where I am at the moment, Dec. 20th, 2023. I have the adequate amount of voltage going from the battery to the fuse box main entrance. However, when I check my fuses individually, there is no power. What could be causing this?
How about the connection on the side of fuse box (are we talking the engine fuse box?) I would next check any and all grounds you can find. th-cam.com/video/ErNNTAQWu8o/w-d-xo.htmlsi=B40ZFZ9HRfwoJhkl
@@dannyjohnsonsgarage The connection to the fuse box is one or two fairly thick cables that have an (gauge ring terminal), eye washer connection that is securely fastened to the fuse box by way of a 3/16 nut.....more or less in size. It is not 3/8 or 1/2 that I do know.
@@dannyjohnsonsgarage Now I have another problem. Both my doors do not respond to the manual lock unlock button. You can hear a slight clicking as if they want to lock or unlock. But nothing happens. And, I developed 32 code on my Airbag instrument panel light. I am going to charge the battery overnight and see what is going on. Thank you.
I just had a problem with my 2002 Mustang. For some reason, my o/d overdrive was flashing. And every time I give power to the car, the car won't move at all. It struggles to move
I have an 02 new edge gt currently I have no taillights but I do have breaklights, also my drls don’t turn on with just the lights on alone. Hoping it’s a fuse but not sure exactly which one to check, would appreciate any help🙏🏽
Hello Mr. Johnson, I charged the battery overnight. I have yet to touch the car. I will in about an hour. Did I mention to you that the "eight on/off ignition" switch cycle does not prompt my doors to lock and unlock as they should?
Hey Danny great video and explanation of the fuse boxes. I have a question? Looking at the video at 2:30 sec what electronic module is to the left of the fuse box. It looks like 3 connectors 2 white, and 1 black (by driver side KICK Panel). You won't believe what happened when I was troubleshooting this area. I'm thinking it's some type of relay or relay's for the engine control module(PCM)I have owned a 2004 MACH 1 for just under 20 yrs now. Never. I think I figured it out there are several components around and above the kick panel floorboard. The component I asked about are marked in the Serice manual as C313,C314,C315
So I had the max fuse #6 (pcm) start blowing on me yesterday. It seemed to do it while I was turning right and/or pressing on the brake. I can replace the fuse, drive about 200ft and it will blow again. I started diagnosing it with a test light and noticed the max fuse #? (i/p, PCM) had a short. So I went under the dash and pulled fuse #21 5amp and the test light went off so I'm guessing the short is somewhere between the instrument cluster max fuse in the engine bay and the cluster fuse under the dash. I also noticed the box that is connected to the fuse panel under the dash is clicking and I never noticed it before but when I pull that 5amp instrument cluster fuse under the dash, it stops clicking. It's an 01 cobra with 46,xxx miles and nothing has really been touched on the car, it still has the stock radio. I know it's not impossible but I don't think there's any cut wires under the dash so could that box possibly have a short inside since it seems to be on the same circuit?
i have a 00 GT 4.6 we blew a fuse, after replacing it i now have no brake lights, hazards or turn signal, i have tail lights when i have the lights on, replaced relays, multi switch i am at a loss it has to be something i am missing, my under dash panel dont have the red on it so its a guess
you have to run back and re wire everything make sure it tight and no butt connectors after that replace the fuses but mainly the yellow and green big fuse in the engine bay fuse!
Been thinking about installing a dash cam in my 04 mustang gt. You seem to be very knowledgeable on these cars. I was wondering if you would know what good fuse slots would be good to use to power the dash cam? The cam hardware kit would have three connections consisting of a ground wire, an accessory wire, and a constant on power wire. The accessory and constant on wire would need to be connected into the fuse box with fuse taps. Could one use the unused fuse slots or is there no power going to those slots? I’d appreciate any help.
I would look into the add a circuit and the video shows the spots that work best like instrument cluster that has power with the key only. For the constant power there should be some good ones that have power even with the car off, but you don’t want a battery drain. th-cam.com/video/GqEPnEDM93Y/w-d-xo.htmlsi=KF2QiiNCg0xcbOTY
Maybe you might a solution or way to guide me oh who could address my issue…my anti theft light stays on while the car is parked an turned off and the car starts normal…. before the light would blink while parked an off it’s 04 gt
If you could help me out which fuse would be for the dashboard lights. Because when I’m driving at night, my dashboard is completely black and can’t see my speed or anything.
It’s a bit later but my dimmer is all the way up, those numbers you gave me all the fuses were good, and I replaced all my bulbs and it’s still not working my guess is electrical problem
I have a 2002. I don't have the fuse you called the Powered Windows fuse. It's completely gone, But have been since I bought my car. My windows stopped working a few days ago. Can't be that fuse. I haven't figured out the location, I've been working on this for a couple days
Hi Danny Johnson, I thought I was having a fuse problem! Help! I subscribed to your channel as it's just what I needed for my mustang. I'm having problems with my gas gauge not working from time to time. Shows empty and the low fuel light comes on, then it'll work and read 3/4 or whatever amount of gas I have in the tank. When this goes out I've also noticed the mileage gauge goes black as well. I thought it to be a fuse which brought me here. Any help? Please? Thank you, Gunny GySgt USMC Disabled Veteran
Hey Danny do you happen to have a video were you show where the fog light wiring harness runs through? My driver side fog light wire for ripped out from an accident. And I'm trying to re wire it like the factory way. Update 8/2/22: so I figured it out but idk if this is exactly how it came from the factory. I tapped into the passenger fog light wiring and so I'm going to run the wiring through the radiator area then drop down to feed the driver side fog light. I swear I looked at the driver side wiring harness and I couldn't find any clues to where the original fog light wiring tapped into. So I'm just gonna do it this way instead.
I believe it’s in the same harness as the head lights and turn signal, so most likely you’ll want to take off the front bumper to have access to it all th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
@@dannyjohnsonsgarage hey brother, idk if this is the factory way but I just tapped into the passenger side fog light and now it powers up the driver side. Going to run the wires all clean and tucked under. From what I can tell the passenger fog light wiring comes from that fat wire harness near the passenger frame rail.
@dannyJohnsonsGarage Can you please tell me the what the fuse size is for power windows? 20A Relay ? What's the name or part number 43 20 Circuit Breaker: Power Windows? thank you!
Hi, new battery, new starter. But, the car is completely dead - no crank, no start, no dashboard lights... nada. Saw this and swapped the starter relay. Any suggestions on the culprit? thank you
Hello, my front low beams work but not the ones in the back do u think its a fuse? both don’t work, my emergency light, brake lights and blinkers work just not my park lights and low beams or tailights wtv u wanna call them , help me please
I have a question. There is a braided ground cable in the back of the engine block more or less in the area of the passenger head area or just below the head. Where does this braided ground cable go mounted?
I keep going through the description to see if i missed something but I’m not finding it, i have an 01 mustang gt and the lights on my rear view mirror won’t turn off do you know which fuse controls that? My intrusive thoughts are telling me to cut the wires to get it off so i can stop always disconnecting the battery but i know this is the right way to go about it, any help? 😅 beautiful stang btw!
Spot #7 under the dash is for interior lamps, so I would try to replace that fuse and if it’s still a problem remove the fuse but also see what else does not work. It could be a sensor thinking the door is not closed
My 2002 gt convertible the alarm keeps going off when I open the door and won't start, will taking out the fuse for the relay help reset? I've done everything else on TH-cam to try to bypass it and now my key fob won't work..brand new battery on it and done all the tricks can u help me please?
It depends on if it’s an aftermarket alarm or the factory pats. I would check all the fuses for any sign of a add a circuit or blown fuses. Otherwise it’s best to have the pats alarm system turned off in a tune
@@dannyjohnsonsgarage after further investigation there was a killswitch installed by the bottom fuse box inside the car....I hit it and it killed the alarm and it started right up......this is after I tried every trick on TH-cam...my key fob still isn't programmed cuz its an aftermarket one but ill figure that out or just use the key from now on.
Please help! My wipers and radio stopped working on my 03 Cobra. I checked both of the fuses listed in this video for them and they are not blown. Any other ideas?
Hey man so I just bought a 2003 mustang. The radio doesn’t work at all. I checked the #27 fuse to see if it’s still good and it is. Do you know what it might be?
If I take out fuse 27 (20 amp fuse) the radio and plug it into the bottom of a fuse tap and then plug a 10 amp fuse ( for aftermarket speedometer cluster) into the top I shouldn’t have a problem correct ???
@@dannyjohnsonsgarage thank you so much for the video mines a little different I only have one red wire not two and the unit I got does have a dimmer not to concerned if it’s on when the cars on even in the day time so would I be able to just use socket 5 ? Or should I use the other socket in the video with the dimmer ? Again thank you so much for your time
It’s usually an inline fuse (known as a fusible link) and part of the wire so it’s hard to see th-cam.com/video/s98LpJFGg4A/w-d-xo.htmlsi=nmMDZbvQA_-Hqy3A
Danny I've just successfully swapped my 1999 V6 Mustang with a 02 GT engine in my car, I really appreciate all your videos! I couldn't have done the job without them, especially the cam chain replacement video. Thank You!
Thank the lord for you I’ve had so many things dead in my car and you just saved me love ya man
After watching this i found out what fuse i needed for my power windows to work, 20A Circuit Breaker. Thanks
Where did you find one? When I got one from orileys they sold me something that wasn’t the same size
AutoZone or oRileys. There like only 1 in the whole store and all the other stores in my town. @@Seethinginthecorner
Yeah, where did you go to get one? 5:21
Bussmann Circuit Breaker BP-FCB-20-RP i got mine at AutoZone, same color and size. @@killr_millerlite
This is a very useful video, and it helped me make sure I had fuses in all the right spots on my sons 01 Mustang! Thank you sir!!!
Appreciate it, I didn’t have the owners manual to check myself, just searched on yt clicked on the first one (yours) went and replaced all fuses. 03 gt sat for 5 years no start since, had it start up first crank.
Thanks! Me and my son figured out how to fix the windows because of this! You're a life saver. Nothing paid!
I have some other window videos you may enjoy in the future
Window Motor Replacement Ford Mustang 1994-2004
th-cam.com/video/cq1N7RqW4c4/w-d-xo.html
This is a handy one for left/right ones too
Window Motor Tear down, diagnosis, re-assembly Ford Mustang and other makes and models
th-cam.com/video/ZgMhVUTO1-E/w-d-xo.html
Was your windows just cause the power windows fuse ?
@@b-bitter91 Fuse literally fell out in the floor and was under the floor mat. How this happened? Who knows. But it did. Popped it back in, and the windows immediately worked.
I haven’t had windows in the mustang for a week or so now. The weather took a turn for the worse so it wasn’t a big deal in the garage. Well, I got stuck taking that car to work this morning. It made it more of a necessity. Anyways, I climbed under and the first thing I saw was the large silver one for the windows and it was just dangling there. I pressed it up in there all the way and my windows worked instantly! I must have kicked it getting in and out. It’s good to know that was all it controlled and wasn’t really effecting anything else.
I'm in the same situation now and this video cleared my doubts and your comment confirmed that the silver one is tomorrow I'll buy it 😅
I just bought this car and everything works but the windows. I noticed the same big silver one #43 is missing in mine.
I bought it but it isn't just a push in one? How do you get it in there?lol
Be gentle, I'm an old lady 😂
It’s funny because I was trying to see where to put this fuse that fell out in my car, but didn’t put together that my windows weren’t working, so I checked this video to see where to put it & it was the last one covered on the “under the hood” fuse box !! Thanks brother 😂
Where?
@@bountyhunterd3001 the fuse box located under the dash
@@acenextdoor6973 which one is it tho ? The biggest one?
@@acenextdoor6973 with the metal look or another regular one
Man, this was a life saver!!!!
I think you saved me ❤I have a "flash code" from THEFT light on dash... 1 long.... 6 short (repeat). Research tells me this is a blown PCM fuse and your video told me where it is. Sure enough... it is blown. Not yet sure if there is another issue that caused it to blow, but the aftermarket alarm sounded and then pulled the battery... later would crank but no start. Anyway, will swap with headlight fuse tomorrow and do some testing. THANK YOU!
Seems I have a dead short :( I swapped the headlight fuse with the PCM and I did not hear / see it immediately blow, but when turned the key to "ON" (not crank), the THEFT light began blinking very fast, as it did before. I pulled the fuse and it was blown. Do you know if battery must be disconnected prior to new fuse or something else?
HA HAAAAAA... I found it! A wire to Mass Air under fender makes a VERY hard turn around the very sharp edge of sheet metal and wire was grounded. The fuse would not blow, until the key was turned to "ON", and since that was the last place I was working, prior to failure to start... that was it. Thank you for your informative video's 🐈
Thank you very much for the very educational video, thank you for your very useful explanation and guidance, I want to be a salesperson and a responsible human being with my neighbor, soon I am going to sell my car and I want to be sure that its new owner has
the box with the correct fuses. Thank you very much.
Thank you found the fuse for my instrument cluster dimmer. All of my instrument lights were out found the fuse and fixed it.
Thanks for helping me find the power window fuse! My driver window doesn’t lower, but passenger side works.
Same!!!
Where is it located?
Where is it located?
Thankyou! I always save videos like this in my information playlist just in case if needed.
Awesome video thank you! Sorted out my power window issue…
I love how theres no cover for the fuses under the wheel. That way, you kick them out when you get out of the car! :)
Thank you Danny for that video on the fuse box my horn stop working I couldn't figure out which fuse was for the horn sorry watch your video I put a new fuse in and it worked thank you again for the video
Keep the videos coming Danny I'm restoring a 01 cobra and I referred to your videos often through this restoration
Thanks for takin the time to make this video!
I love how you read this off and pointed at everything
This helped me thx grandpa said it wasn’t the fuses when he checked and it was
Can you talk about fusible links and their locations and what they do and how to diagnose them?
LIFE SAVER
Thank you so much this helped with finding a 98’ horn fuse!
One of best videos out there 🫡👌
Definitely going to look into this this weekend my horn doesn’t work or my traction control has been on forever
There's like a grey cover on mine. Damn, forgot my screw driver set. Subscribed 👍 brb Oh it's just a plate cover. I got it off and put back on. lol
Danny, I had a no start/no crank situation and wasted a lot of time and effort on removing/testing the starter and clutch peddle safety switch. I watched this video and switched the starter relay with the #5 fog light relay and my car started right up! Can a relay simply go out sometimes or did something cause it to go out? My car is an '03 Cobra 10th Anny and has 31,500 miles and is basically stock except for a 2.8 pulley. Thank you for the videos and I enjoy your channel!
The relay is just a switch and sometimes it does just get stuck open/closed and it does happen
@@dannyjohnsonsgarage okay that’s good to know. Thanks again,and I appreciate all the content for fellow Cobra owners!
Thanks for this!
Both my headlights and hi-beams have stopped working and I'm hoping to identify the issue with the help of your video!!
While you're showing stuff...
I feel really stup-pid for asking this....I've owned my 2004 for almost 3 years and still haven't found the control for the antenna (to raise and lower it)???
I've gone through the manual, I've been on the net, I've asked for youtube clips on it but
have found absolutely nothing????
Help.........
Have you ever been a dam surgeon ….. your explanations are specific and accurate as fak 😜 thank you
Thanks for taking the time to film and post this. It’s tremendously helpful! You mentioned that fuse #9 is for the Mach 460 amp in model years 02-04. Any idea which one would be the fuse for the Mach 460 amp for a 2001 model?
Could help someone in the need of a quick fix. Very helpful Danny. 😻
Is there only one air bag fuse
Where is the anti lock fuse underneath the hood
Update on 1999 GT. After some troubleshooting. A Bussman 40 amp Max Blade fuse was assed up. I temporarily bridged the circuit and all my problems went away. However, my fuel pump does not want to kick in. It has a closed circuit at the fuel pump connector but the fuel pump does not want to kick in. Merry Christmas.
There are a few things you can check for the fuel pump. The CCRM th-cam.com/video/PfiN6U-FqMQ/w-d-xo.htmlsi=fuw1rC-fUXU-T8HM
And the fuel pump fuse and inertia switch
th-cam.com/video/u8rogpZSCXg/w-d-xo.htmlsi=IX2avQ4iq7puaiaw
@@dannyjohnsonsgarage You are correct. But I checked the circuit the fuel pump and that probe does light up indicating there is current on that circuit. Although I don't know how many volts are actually going through the circuit. Nevertheless, the CCRM does, at times, make the fuel pump act up.
Excellent. Thanks
First off. You video have helped me out a ton. Second, Merry Christmas 2023. Here is my problem. Since the last time we have been in chat, I have managed to get the GT cranking, starting and moving. However, recently, I have been getting fuel delivery problems. Here is where I am at the moment, Dec. 20th, 2023. I have the adequate amount of voltage going from the battery to the fuse box main entrance. However, when I check my fuses individually, there is no power. What could be causing this?
How about the connection on the side of fuse box (are we talking the engine fuse box?) I would next check any and all grounds you can find. th-cam.com/video/ErNNTAQWu8o/w-d-xo.htmlsi=B40ZFZ9HRfwoJhkl
@@dannyjohnsonsgarage The connection to the fuse box is one or two fairly thick cables that have an (gauge ring terminal), eye washer connection that is securely fastened to the fuse box by way of a 3/16 nut.....more or less in size. It is not 3/8 or 1/2 that I do know.
@@dannyjohnsonsgarage Now I have another problem. Both my doors do not respond to the manual lock unlock button. You can hear a slight clicking as if they want to lock or unlock. But nothing happens. And, I developed 32 code on my Airbag instrument panel light. I am going to charge the battery overnight and see what is going on. Thank you.
So where is the turn signal fuse
Where is the dom light located
extremely helpful video. thanks so much!
Super helpful thanks
I just had a problem with my 2002 Mustang. For some reason, my o/d overdrive was flashing. And every time I give power to the car, the car won't move at all. It struggles to move
I have an 02 new edge gt currently I have no taillights but I do have breaklights, also my drls don’t turn on with just the lights on alone. Hoping it’s a fuse but not sure exactly which one to check, would appreciate any help🙏🏽
@alexhernandez Did you figure it out ?
hi brother i’m having this exact same issue did u figure it out? i’m losing my mind help pls
Having the same problem did you figure it out?
Hello Mr. Johnson, I charged the battery overnight. I have yet to touch the car. I will in about an hour. Did I mention to you that the "eight on/off ignition" switch cycle does not prompt my doors to lock and unlock as they should?
great video, very detailed.
Thanks for this. Very useful!!!
Nice video danny
The first couple black ones you were talking about aren’t in my 02 mustang, is that normal?
Hey Danny great video and explanation of the fuse boxes. I have a question? Looking at the video at 2:30 sec what electronic module is to the left of the fuse box. It looks like 3 connectors 2 white, and 1 black (by driver side KICK Panel). You won't believe what happened when I was troubleshooting this area. I'm thinking it's some type of relay or relay's for the engine control module(PCM)I have owned a 2004 MACH 1 for just under 20 yrs now. Never. I think I figured it out there are several components around and above the kick panel floorboard. The component I asked about are marked in the Serice manual as C313,C314,C315
So I had the max fuse #6 (pcm) start blowing on me yesterday. It seemed to do it while I was turning right and/or pressing on the brake. I can replace the fuse, drive about 200ft and it will blow again.
I started diagnosing it with a test light and noticed the max fuse #? (i/p, PCM) had a short. So I went under the dash and pulled fuse #21 5amp and the test light went off so I'm guessing the short is somewhere between the instrument cluster max fuse in the engine bay and the cluster fuse under the dash.
I also noticed the box that is connected to the fuse panel under the dash is clicking and I never noticed it before but when I pull that 5amp instrument cluster fuse under the dash, it stops clicking. It's an 01 cobra with 46,xxx miles and nothing has really been touched on the car, it still has the stock radio. I know it's not impossible but I don't think there's any cut wires under the dash so could that box possibly have a short inside since it seems to be on the same circuit?
Yeah, it must have a short associated with that fuse. Some times it’s wires that have rubbed in the wheel well or an aftermarket alarm system
So theres 2 fuses for the windows 40A and then one under the dash #44 big grey one?
i have a 00 GT 4.6 we blew a fuse, after replacing it i now have no brake lights, hazards or turn signal, i have tail lights when i have the lights on, replaced relays, multi switch i am at a loss it has to be something i am missing, my under dash panel dont have the red on it so its a guess
you have to run back and re wire everything make sure it tight and no butt connectors after that replace the fuses but mainly the yellow and green big fuse in the engine bay fuse!
Been thinking about installing a dash cam in my 04 mustang gt. You seem to be very knowledgeable on these cars. I was wondering if you would know what good fuse slots would be good to use to power the dash cam? The cam hardware kit would have three connections consisting of a ground wire, an accessory wire, and a constant on power wire. The accessory and constant on wire would need to be connected into the fuse box with fuse taps. Could one use the unused fuse slots or is there no power going to those slots? I’d appreciate any help.
I would look into the add a circuit and the video shows the spots that work best like instrument cluster that has power with the key only. For the constant power there should be some good ones that have power even with the car off, but you don’t want a battery drain. th-cam.com/video/GqEPnEDM93Y/w-d-xo.htmlsi=KF2QiiNCg0xcbOTY
Maybe you might a solution or way to guide me oh who could address my issue…my anti theft light stays on while the car is parked an turned off and the car starts normal…. before the light would blink while parked an off it’s 04 gt
any idea on the blinker fuse. Replaced bulbs with LED no blinking quick. Need to find blinker fuse
If you could help me out which fuse would be for the dashboard lights. Because when I’m driving at night, my dashboard is completely black and can’t see my speed or anything.
I would try spot 5,21,and 34 under the dash
It’s a bit later but my dimmer is all the way up, those numbers you gave me all the fuses were good, and I replaced all my bulbs and it’s still not working my guess is electrical problem
What would my brights be?
I have a 2002. I don't have the fuse you called the Powered Windows fuse. It's completely gone, But have been since I bought my car. My windows stopped working a few days ago. Can't be that fuse.
I haven't figured out the location, I've been working on this for a couple days
Hi Danny Johnson, I thought I was having a fuse problem! Help! I subscribed to your channel as it's just what I needed for my mustang. I'm having problems with my gas gauge not working from time to time. Shows empty and the low fuel light comes on, then it'll work and read 3/4 or whatever amount of gas I have in the tank. When this goes out I've also noticed the mileage gauge goes black as well. I thought it to be a fuse which brought me here. Any help? Please? Thank you,
Gunny
GySgt USMC Disabled Veteran
It could be the sending unit on the fuel pump assembly or the gauge cluster. What year is it?
My dash lights up and everything but when I turn the key it doesn’t crank or start I have a 04 GT, I’m going to check it rn hoping it’s an easy fix
Any fuse for O2 sensors?
Hey Danny do you happen to have a video were you show where the fog light wiring harness runs through? My driver side fog light wire for ripped out from an accident. And I'm trying to re wire it like the factory way. Update 8/2/22: so I figured it out but idk if this is exactly how it came from the factory. I tapped into the passenger fog light wiring and so I'm going to run the wiring through the radiator area then drop down to feed the driver side fog light. I swear I looked at the driver side wiring harness and I couldn't find any clues to where the original fog light wiring tapped into. So I'm just gonna do it this way instead.
I believe it’s in the same harness as the head lights and turn signal, so most likely you’ll want to take off the front bumper to have access to it all th-cam.com/video/e7kZ03hPyx4/w-d-xo.html
@@dannyjohnsonsgarage sweet man thanks as always! Your videos are like an archive for new edges lol.
Angel hope you get it figured out. 🙂
@@CheesusSVT thanks man!
@@dannyjohnsonsgarage hey brother, idk if this is the factory way but I just tapped into the passenger side fog light and now it powers up the driver side. Going to run the wires all clean and tucked under. From what I can tell the passenger fog light wiring comes from that fat wire harness near the passenger frame rail.
I have an 04 GT Convertible with zero interior lights. Fuse is ok. (Dash lights work fine) any ideas what I may look for??
How do I fix cruise control not working
On my 01 mustang gt #6 40 amp fuse is for power windows not the instrument cluster. I'm so confused lol
@dannyJohnsonsGarage Can you please tell me the what the fuse size is for power windows? 20A Relay ? What's the name or part number 43 20 Circuit Breaker: Power Windows? thank you!
soi have a problem and idk which fuse its is for my dashboard speedometer please help lol
which one is the abs for my 2004 mustang v6 or it doesn’t work
Anyone know which fuse is for the dash lights?
Where is the heated seat fuse for 2001 Ford Mustang
Nice
Hi, new battery, new starter. But, the car is completely dead - no crank, no start, no dashboard lights... nada. Saw this and swapped the starter relay. Any suggestions on the culprit? thank you
I would check the battery connections first, then the grounds. th-cam.com/video/ErNNTAQWu8o/w-d-xo.htmlsi=lj3s2YOWjsc-55aC
th-cam.com/video/wvalNMYHVIE/w-d-xo.htmlsi=MJMbt4Ik72GCJYe2
Which ones do I pull to do burnouts? 2002 mustang 3.8.
The v6 has an open end differential, so only the passenger side will leave a mark and gets power
What's s good 12v switched sorce location. I'm gonna use a fuse tap
If you have a coupe, the harness they runs through the console for the convertible top is a good, unused one as I recall
Dome light is light blue #7
Which one is for the Radiator cooling fan for the mustang v6 1999? 😢
I would look at this one th-cam.com/video/Yv7uHat7u3g/w-d-xo.htmlsi=Tz1t7m61HUAaO7GV
Hello, my front low beams work but not the ones in the back do u think its a fuse? both don’t work, my emergency light, brake lights and blinkers work just not my park lights and low beams or tailights wtv u wanna call them , help me please
Do you know what fuse is used for the lights on the dash like the speedometer?
Spot 5 should be the cluster and 37 the dimmer. I’d check those first
What fuse do I need to re light my dash lights. None of them light up
Check fuse 37
Wait does the stereo fuse fix the speakers ?
I have a question. There is a braided ground cable in the back of the engine block more or less in the area of the passenger head area or just below the head. Where does this braided ground cable go mounted?
It goes to the hood blanket insulation th-cam.com/video/ErNNTAQWu8o/w-d-xo.html
I keep going through the description to see if i missed something but I’m not finding it, i have an 01 mustang gt and the lights on my rear view mirror won’t turn off do you know which fuse controls that? My intrusive thoughts are telling me to cut the wires to get it off so i can stop always disconnecting the battery but i know this is the right way to go about it, any help? 😅 beautiful stang btw!
If it’s on the rear view mirror you must have a convertible. I’ll have to look it up when I have a minute, but it should be one for the dome light
Spot #7 under the dash is for interior lamps, so I would try to replace that fuse and if it’s still a problem remove the fuse but also see what else does not work. It could be a sensor thinking the door is not closed
I have a 04 gt convertible my radio or wipers don’t work
Which fuse is for the overhead dome light?
My 2002 gt convertible the alarm keeps going off when I open the door and won't start, will taking out the fuse for the relay help reset? I've done everything else on TH-cam to try to bypass it and now my key fob won't work..brand new battery on it and done all the tricks can u help me please?
It depends on if it’s an aftermarket alarm or the factory pats. I would check all the fuses for any sign of a add a circuit or blown fuses. Otherwise it’s best to have the pats alarm system turned off in a tune
Here is what an add a circuit looks like th-cam.com/video/GqEPnEDM93Y/w-d-xo.html
@@dannyjohnsonsgarage after further investigation there was a killswitch installed by the bottom fuse box inside the car....I hit it and it killed the alarm and it started right up......this is after I tried every trick on TH-cam...my key fob still isn't programmed cuz its an aftermarket one but ill figure that out or just use the key from now on.
Please help! My wipers and radio stopped working on my 03 Cobra. I checked both of the fuses listed in this video for them and they are not blown. Any other ideas?
What’s the black box with the X on it?
So what fuse is for my small windows in my 2000 convertible
Hey man do you know which fuse would be for my charging port ?
I have a question why does my starter motor relay fuse keep blowing
It could be from a short in the wire drawing too much power, or a loose connection
What is the license plate lights fuse for 03 cobra
Hey is the generator fuse the same as an alternator fuse??
Where is the headlight fuse my tail lights work but not my headlights
Hey man so I just bought a 2003 mustang. The radio doesn’t work at all. I checked the #27 fuse to see if it’s still good and it is. Do you know what it might be?
If I take out fuse 27 (20 amp fuse) the radio and plug it into the bottom of a fuse tap and then plug a 10 amp fuse ( for aftermarket speedometer cluster) into the top I shouldn’t have a problem correct ???
th-cam.com/video/GqEPnEDM93Y/w-d-xo.html
@@dannyjohnsonsgarage thank you so much for the video mines a little different I only have one red wire not two and the unit I got does have a dimmer not to concerned if it’s on when the cars on even in the day time so would I be able to just use socket 5 ? Or should I use the other socket in the video with the dimmer ? Again thank you so much for your time
Do you happen to know what wire/wires connects to the side of the fuse box? Is it just the 1 wire or 2
My break light switch doesn’t work even with new fuse what do you think it could be?
It could be the switch itself or wiring from the switch to the tail lights. I’d try some continuity tests th-cam.com/video/-BUzm-OeGhE/w-d-xo.html
Did I miss it for the single lights fuse? what part of the video is it?
Can anyone help I got a 96 mustang gt and it’s not charging. New alternator new battery new pcm.
I would check the connection for the alternator and it’s wiring for shorts and also check the grounds th-cam.com/video/ErNNTAQWu8o/w-d-xo.html
Danny, what is the black box to the left of the fuse box underneath the dash?
If I remove #27 from my 02 mustang gt would that turn the day time running lights off while driving? Cheers
Yes, but there might be other items on that circuit, so just be sure it’s the only thing
Gee Wizz u gots fine roads for stretching out ur baby my baby has 4.10 gears and she is cranky out 3grand at 90mph
Alternator fuse ?
It’s usually an inline fuse (known as a fusible link) and part of the wire so it’s hard to see
th-cam.com/video/s98LpJFGg4A/w-d-xo.htmlsi=nmMDZbvQA_-Hqy3A