So to start off Minelab does have a video about ground balancing. Granted that should be in the manual. I have experienced all the same issues as you have. I would have went with another pin pointer. My problem is I bought it as a bundle deal with the 540 pro pack. I do know weak batteries will make it go wonky. For the most part it has been useful. I thought I had a problem with the Ferris nonferris mode but I think it takes the pointer a sec to lock on and create the distinction. The light is not very bright but I am not using it at night. Another thing is if you wash it off the speaker hole will get water in it and the volume will reduce a bit. I just blew the water out and it was totally fine overall it’s my first pin pointer and detector. I am on my learning curve. I have mainly used the pin pointer in my yard because I am exploring an area full of stuff next to the house. Tons of keys have washed up through the years including a skeleton key. My house was built in 1901. Found 4 more keys today just in the 1 ft area zone was playing in and the pointer worked great
I have persisted with the 35 and the one I have now hasn't faulted. Glad to hear yours is doing the job. Some good suggestions there. I agree on the battery thing, I had the same issue. Happy hunting
Today is my first day detecting and my Profind-20 was giving me fits. Another video showed how snugging up the battery inside helps. So I McGiver'd a thick rubber band from my vegetables and wrapped the battery with a few twists. Its inside the housing Snuggly now. Some people have said that the pointer lacks a place to tether a line. That's not true. Two tiny holes in the battery lid fit a single wire key-hole ring. I attached a spare one and now I can attach a springy stringer from one of those CASINO cards you receive when loosing all the money you found metal detecting. Ultimately you find the coins in the ground, the slot machines take in the profits and the casino gets your hard earnings. That how it works, recycling.
Hello Sir, I have the Pro-Find 35 and 40, If you only want the vibration and not the beeping, you must hold down the (-) minus button while powering up the unit. It will only vibrate. It will stay set like that every time you power it up. and will not beep again until you press the (+) plus button while powering up the unit. Also, if you have the quirky constant beeping, just depress the power button quickly and it will stop the beeping. I know this works on the 40, not sure if it will have the same results on the 35 as I have not had that problem as of yet. I hope this helps. Happy Hunting!!
I also just received my second warranty replacement for my Pro-35. Each replacement sent by the repair center was worse than the last. Same issues you demonstrated on the first and second. The third one would constantly power off when It alerted to a target, started clicking rapidly and would not power off when I tried. Just crazy stuff. When they send the third replacement I'm going to see if I can trade it in or sell it. It seems the Garrett is the next most popular.
Thanks for your effort Bakerzinc. My first 35 failed under water at 1 metre depth or less. My supplier sent me a replacement & it also failed under water at same or less depth. Both times failed first time in salt water. Does not work anymore. Pretty disappointed for $250 AUD
Good video. I have a Pro-finder 25 that falses almost constantly at higher sensitivity when pointing it up and down, just like your video. I just found out that if I hold it straight up or straight down while powering on, it doesn't do that. I think maybe holding it like that on power up must be canceling out whatever is causing the falsing. It's probably best to turn it on while pointing in the down position since that's the way it will be used.
Mate, everything you're saying are problems I encountered too, like everything. There's no instructions or tips anywhere i could find. Thanks for your video, hopefully the calibration methods work, trying to find targets in the water or in deeper soil with the pinpointer beeping out of control is the worst. 👍
I needed to watch this vlog. Well done! I have these issues from a 2nd hand product, thought I got ripped off! Unaware of the ground balace and getting the 'inverted signal' aswell!
Virtually anyone using a Minelab pinpointer eventually goes batty with false readings -- which, by the way, isn't remedied by smashing the crap out of it on a nearby tree. When not screaming on its own, it is still the best pinpointer.
I have to issues with my 35 1 is when you invert it bring it back to normal it keeps beeping order issue when it finds a target and I take the pin pointer away from the targets it doesn't stop beeping until I put it back touching the target
Just got a 25 spent most of the day kneeling my targets hole getting soggy knees and using some very colorful language... Evan after many restarts I started to work but jeez the distance from a target to the pinpoiner im early not impressed I had a xpointer miles better
I had all those issues on my 35 to but its final death after one and a half years was the rubber over the on/off switch split letting in dirt and moisture. Far better next choice was the nokta pulse dive that comes in a quality case, spare o rings, tip cover, mini coil for scuba diving, and its pulse induction so no salt water probs, all for about the same price and no issues at all ! Minelab dropped a bollock on this one
I kind of felt wished I’d seen this before purchase just very recently! First thing I noticed was you can’t read the instructions they’re too small. And it seems a complicated bitta gear. Lights useless, to me just a power user. Oh well I suppose I’ll see how it goes because I’m stuck with it now! Same deal I purchased due to brand quality and Australian … and later I notice made in Malaysia 🤷🏻
Ever since mine was new it wont stay on! I have to use my knock off carrot. The minelab one is junk! Also if i get it to come on and stay on if i invert it, it would shut off bc the battery was moving around. It doesn't fit tight in there. I put a Sacagawea dollar in it to hold it down
It’s pinpointer mate........your skills using your detector and listening to the sounds........and yes the sounds will give you the best information on what your about to dig............if you go buy the VDI..only............your not getting half the picture. Dig the good sounds..........VDI’ s don’t matter........if it sounds good dig it. My early days were if it beeps dig it.............fantastic learning ground.............your detector knows what’s in the ground before your pinpointer..............if YOU really know what the detector is saying to you........pinpointer is not so important............just saying........after 40 years.............you do what you do.............to help yourself..........
It sounds like they listen to you, I just bought one of these today the box says it comes with a lanyard and it's got a vibration mode which would help with the hearing and noisy areas
You’re kidding me. I thought that it was me! Same issues. There is nothing in the instruction about ground balancing (I just checked and the instructions are the same). I could hold it in the middle of the air and it would go off constantly. I could be 3km away from a road, let alone overhead powerlines. I would have to set it on the minimum to stop the beeps. What is the point of that? I would get a signal with the GPX and then use the pin pointer. I have chased signals with the 35, then nothing. Have I missed good gold or did I waste my time searching for something that wasn’t there? We all know that we pay for the Minelab name but we accept that (the technology has been around for years and I could build one for under $20) and that they are way overprices for what you get. That’s the norm these days and I accept that but I at least, I expected it to work as stated. I don’t know what you have in your state but in NSW Its Fair trading. I’m going to complain to them and you should too. That’s just plan false and misleading which is illegal and they need to be held accountable.
Wel you are within your rights to pursue that under consumer law but Minelab will replace it under warranty as they are obliged to do so you may find you hit a brick wall there. Hopefully minelab eventually scrap this model and build a pin pointer that does the job and lives up to the minelab name.
I have the pro 35 and when I move it around on high settings it beeps with just typing it up down sideways every direction but if I lower it down 3 notches its fine but I only get to the second power setting so useless I emailed minelab as well good vid srry for rambling lol
Yeh I feel your pain. The only answer is to return it (if its still under warranty) and try again. You could try get a refund. I haven't tried other pinpointers but I hear the garret carrot and the M14 are worth trying.
I’ve got the exact same problems. It started of working really good. Now after 2 months it’s going completely erratic on the high setting even when I’m outside away from everything. It must have a design fault if there are a heap other people getting the exact same problems. I’ve been reading quite a few reviews. It’s disappointing as it started off working really good and I couldn’t fault it. Now it’s really annoying me. I’m thinking about sending it back under warranty. Hopefully I get a good one back that doesn’t have the same faults.
I started right off with that happening, then eventually it started powering itself off for no reason. I sent it in and they found the battery housing was cracked which would allow water intrusion. I just got the brand new replacement unit today and guess what? In level 3-5 it goes crazy when tilted. I'll try the ground balance Bakerzinc mentioned, but not confident.
Just received my 35, it does the beep when you fill it around like yours did, on high, medium, but not low... hmmm send it back?? you would figure by 21 this would be solved, yea 140 bucks you expect the best!!
I would return it to the supplier for replacement. If everyone holds them accountable perhaps they will get the message and fix the issues with a new model.
Thanks for that video very informative. I never knew about the ground balance before turning on as you said it's nowhere in the instruction manual. Anyway I used to have the 25 and sold my old detector with the 25. Fast forward 3 years later, decided to buy another detector and it came with a free pro find 15. The 15 is such a downgrade on the old grey 25. Was going to buy today the 35 but after watching your video I'm not sure now. Hearing some really good reviews about the XP rechargeable type. But seeing I've always had minelabs i like to stick with minelab. So overall would you still recommend the 35. Cheers
I wouldnt personally buy one again unless minelab come through with thier promised fixes. Honestly based on the trouble experience with these pinpointers i think they should be recalled. I would look to the XP or Garret Carrot but cant comment on either of these as i have yet to try them.
How do you get warranty service? I reached out to them multiple times and haven't had a response. Ours beeps continuously on switching on! Sometimes resetting helps but not always! Good video... Shall try ground balance next time
Just got my 35 yesterday, tried to use it under water, nightmare, tried restarting underwater to balance it, had to turn sensitivity down to almost zero before it would not just beep like mad, not too impressed with it for the money I paid.
Just bought a eqanox 800 today its still in the b oox. Cant afford a pinpointer yet but i do have my garrett one for now. You wwould think if you van buy a electrick toothbrush for $60 and it has a charging system where you just sit it in the stand that they could do it for the pinpointer considering the price there wanting. I still have my eqanox in the box but started reading the paperwork. It sounds like i need to buy a 2 amp usb charger is this correct. I sent a message ogg tonight to minelab asking this before i take it out the box. Enjoy you info.look forward to learning more if i end up keeping it cheers Andy
I have same problem to much money for junk just started clicking after 7 months of use could have baught a good one for that kind of money what a dirty sham this meny ppl having the clicking problem im discusted
This is 3 years old an they havent listen cause it the same make so if everyone would send them back an stop buying them maybe they will listen untill people boycot a company they want listen
See all they had to do was admit the problem and fix the problem that they knew existed but NO they blame everyone and everything rather than admit the problem is theirs-if your goods are faulty Federal law says- repair -replace- refund-they will spend 5000$ to save a legally required refund of 250$ this is not the only issue Minelab have with there detecting gear and they know it.
@@rocar716 I was using a garret but bugger me just a few weeks ago I went out and bought a minelab pro find 35 and to be honest its not a bad bit of kit compared to the older unit I had troubles with many years ago.
Hi Travis, under the Australian Consumer Law, every product sold has to be 'reasonably durable'. This is independent of what the manufacturer's warranty does or doesn't cover. Go back to them and say you are relying on the ACL and a product like this, designed for use in the bush, should be able to take a few knocks. Link - www.accc.gov.au/consumers/consumer-rights-guarantees/consumer-guarantees
Everything you discussed is exactly my experience also. Minelab profind35 is junk. Love my equinox but Minelab should really be ashamed of this product. I have a $20 chinese pinpointer that is more reliable than the profind. If I were Minelab, I would be embarrassed and try to resolve the problem as quick as I could. Also my unit has a really high pitch squeal that is constant. Anyone elso notice this? Minelab, get it together. I would have payed $200 if it was actually what you promised. Im deeply disappointed.
So to start off Minelab does have a video about ground balancing. Granted that should be in the manual. I have experienced all the same issues as you have. I would have went with another pin pointer. My problem is I bought it as a bundle deal with the 540 pro pack. I do know weak batteries will make it go wonky. For the most part it has been useful. I thought I had a problem with the Ferris nonferris mode but I think it takes the pointer a sec to lock on and create the distinction. The light is not very bright but I am not using it at night. Another thing is if you wash it off the speaker hole will get water in it and the volume will reduce a bit. I just blew the water out and it was totally fine overall it’s my first pin pointer and detector. I am on my learning curve. I have mainly used the pin pointer in my yard because I am exploring an area full of stuff next to the house. Tons of keys have washed up through the years including a skeleton key. My house was built in 1901. Found 4 more keys today just in the 1 ft area zone was playing in and the pointer worked great
I have persisted with the 35 and the one I have now hasn't faulted. Glad to hear yours is doing the job. Some good suggestions there. I agree on the battery thing, I had the same issue. Happy hunting
Today is my first day detecting and my Profind-20 was giving me fits. Another video showed how snugging up the battery inside helps. So I McGiver'd a thick rubber band from my vegetables and wrapped the battery with a few twists. Its inside the housing Snuggly now. Some people have said that the pointer lacks a place to tether a line. That's not true. Two tiny holes in the battery lid fit a single wire key-hole ring. I attached a spare one and now I can attach a springy stringer from one of those CASINO cards you receive when loosing all the money you found metal detecting. Ultimately you find the coins in the ground, the slot machines take in the profits and the casino gets your hard earnings. That how it works, recycling.
I have used a tool lanyard for mine. I had to go back too look for it once when detecting on a beach at night that's when I decided to use a lanyard.
Hello Sir, I have the Pro-Find 35 and 40, If you only want the vibration and not the beeping, you must hold down the (-) minus button while powering up the unit. It will only vibrate. It will stay set like that every time you power it up. and will not beep again until you press the (+) plus button while powering up the unit. Also, if you have the quirky constant beeping, just depress the power button quickly and it will stop the beeping. I know this works on the 40, not sure if it will have the same results on the 35 as I have not had that problem as of yet. I hope this helps. Happy Hunting!!
Thanks for the update. I don't have a 40 yet but intend to get one. They sound much better than the 35 which many people had problems with.
Thanks for this video. I’ve had similar issues. And as you stated, some things are not in the manual but I’ve learnt through folks like you.
I'm watching this 2 years later, I hope they resolved the issues because I just bought one of these about 30 minutes ago
As far as I'm aware nothing has been done. I hope yours is one of the good ones
Thank you, yes I have experienced inverting issues but I still am very happy with the 35
I also just received my second warranty replacement for my Pro-35. Each replacement sent by the repair center was worse than the last. Same issues you demonstrated on the first and second. The third one would constantly power off when It alerted to a target, started clicking rapidly and would not power off when I tried. Just crazy stuff. When they send the third replacement I'm going to see if I can trade it in or sell it. It seems the Garrett is the next most popular.
I really want to try the Deus Mi4. Heard good things
This was helpful thanks! Mine does the same things, so irritating!
Thanks for your effort Bakerzinc.
My first 35 failed under water at 1 metre depth or less.
My supplier sent me a replacement & it also failed under water at same or less depth.
Both times failed first time in salt water.
Does not work anymore.
Pretty disappointed for $250 AUD
I haven't see anything bad about the new 40. I think it would be good to put it through its paces.
Good video. I have a Pro-finder 25 that falses almost constantly at higher sensitivity when pointing it up and down, just like your video. I just found out that if I hold it straight up or straight down while powering on, it doesn't do that. I think maybe holding it like that on power up must be canceling out whatever is causing the falsing. It's probably best to turn it on while pointing in the down position since that's the way it will be used.
Mate, everything you're saying are problems I encountered too, like everything. There's no instructions or tips anywhere i could find. Thanks for your video, hopefully the calibration methods work, trying to find targets in the water or in deeper soil with the pinpointer beeping out of control is the worst. 👍
I totally agree with you buddy my pinpointer is faulty
I needed to watch this vlog. Well done! I have these issues from a 2nd hand product, thought I got ripped off! Unaware of the ground balace and getting the 'inverted signal' aswell!
Your welcome. Thanks for the comment.
Same issues. Good to see I’m not the only one.
Thanks for info on ground calibrating.... I had no idea :)
Virtually anyone using a Minelab pinpointer eventually goes batty with false readings -- which, by the way, isn't remedied by smashing the crap out of it on a nearby tree. When not screaming on its own, it is still the best pinpointer.
I have to issues with my 35 1 is when you invert it bring it back to normal it keeps beeping order issue when it finds a target and I take the pin pointer away from the targets it doesn't stop beeping until I put it back touching the target
Just got a 25 spent most of the day kneeling my targets hole getting soggy knees and using some very colorful language...
Evan after many restarts I started to work but jeez the distance from a target to the pinpoiner im early not impressed I had a xpointer miles better
I had all those issues on my 35 to but its final death after one and a half years was the rubber over the on/off switch split letting in dirt and moisture. Far better next choice was the nokta pulse dive that comes in a quality case, spare o rings, tip cover, mini coil for scuba diving, and its pulse induction so no salt water probs, all for about the same price and no issues at all !
Minelab dropped a bollock on this one
Sounds like it's the one to get. Might get one and give it a crack
I've gone back to the Fpulse. My one buzzes for no reason
I kind of felt wished I’d seen this before purchase just very recently! First thing I noticed was you can’t read the instructions they’re too small. And it seems a complicated bitta gear. Lights useless, to me just a power user. Oh well I suppose I’ll see how it goes because I’m stuck with it now!
Same deal I purchased due to brand quality and Australian … and later I notice made in Malaysia 🤷🏻
Ever since mine was new it wont stay on! I have to use my knock off carrot. The minelab one is junk! Also if i get it to come on and stay on if i invert it, it would shut off bc the battery was moving around. It doesn't fit tight in there. I put a Sacagawea dollar in it to hold it down
The new Minelab pinpointed is supposed to be the upgraded improved version. I'm going to buy one just to test it out
Thx I have a whites trx seems to have pretty good distance and sensitivity. Was thinking about a pro find also but not now. Thx for vid
The ones that work are good! Luck of the draw.
It’s pinpointer mate........your skills using your detector and listening to the sounds........and yes the sounds will give you the best information on what your about to dig............if you go buy the VDI..only............your not getting half the picture. Dig the good sounds..........VDI’ s don’t matter........if it sounds good dig it. My early days were if it beeps dig it.............fantastic learning ground.............your detector knows what’s in the ground before your pinpointer..............if YOU really know what the detector is saying to you........pinpointer is not so important............just saying........after 40 years.............you do what you do.............to help yourself..........
The pinpointer is for recovery! Not identification. With a good pinpointer you can drastically cut down your recovery time. I dont hunt without one.
It sounds like they listen to you, I just bought one of these today the box says it comes with a lanyard and it's got a vibration mode which would help with the hearing and noisy areas
Good video thanks
Thanks. I hope it helped
You’re kidding me. I thought that it was me! Same issues. There is nothing in the instruction about ground balancing (I just checked and the instructions are the same). I could hold it in the middle of the air and it would go off constantly. I could be 3km away from a road, let alone overhead powerlines. I would have to set it on the minimum to stop the beeps. What is the point of that? I would get a signal with the GPX and then use the pin pointer. I have chased signals with the 35, then nothing. Have I missed good gold or did I waste my time searching for something that wasn’t there? We all know that we pay for the Minelab name but we accept that (the technology has been around for years and I could build one for under $20) and that they are way overprices for what you get. That’s the norm these days and I accept that but I at least, I expected it to work as stated. I don’t know what you have in your state but in NSW Its Fair trading. I’m going to complain to them and you should too. That’s just plan false and misleading which is illegal and they need to be held accountable.
Wel you are within your rights to pursue that under consumer law but Minelab will replace it under warranty as they are obliged to do so you may find you hit a brick wall there. Hopefully minelab eventually scrap this model and build a pin pointer that does the job and lives up to the minelab name.
I have the pro 35 and when I move it around on high settings it beeps with just typing it up down sideways every direction but if I lower it down 3 notches its fine but I only get to the second power setting so useless I emailed minelab as well good vid srry for rambling lol
Yeh I feel your pain. The only answer is to return it (if its still under warranty) and try again. You could try get a refund. I haven't tried other pinpointers but I hear the garret carrot and the M14 are worth trying.
I’ve got the exact same problems. It started of working really good. Now after 2 months it’s going completely erratic on the high setting even when I’m outside away from everything. It must have a design fault if there are a heap other people getting the exact same problems. I’ve been reading quite a few reviews. It’s disappointing as it started off working really good and I couldn’t fault it. Now it’s really annoying me. I’m thinking about sending it back under warranty. Hopefully I get a good one back that doesn’t have the same faults.
I started right off with that happening, then eventually it started powering itself off for no reason. I sent it in and they found the battery housing was cracked which would allow water intrusion. I just got the brand new replacement unit today and guess what? In level 3-5 it goes crazy when tilted. I'll try the ground balance Bakerzinc mentioned, but not confident.
Mine constantly shuts itself off, even with a fresh battery.
Makes for tough detecting. It is absolutely junk. I have one I use as a shovel now. 😂
If it's still in warranty get it replaced.
Just received my 35, it does the beep when you fill it around like yours did, on high, medium, but not low... hmmm send it back?? you would figure by 21 this would be solved, yea 140 bucks you expect the best!!
I would return it to the supplier for replacement. If everyone holds them accountable perhaps they will get the message and fix the issues with a new model.
Thanks for that video very informative. I never knew about the ground balance before turning on as you said it's nowhere in the instruction manual. Anyway I used to have the 25 and sold my old detector with the 25. Fast forward 3 years later, decided to buy another detector and it came with a free pro find 15. The 15 is such a downgrade on the old grey 25. Was going to buy today the 35 but after watching your video I'm not sure now. Hearing some really good reviews about the XP rechargeable type. But seeing I've always had minelabs i like to stick with minelab. So overall would you still recommend the 35. Cheers
I wouldnt personally buy one again unless minelab come through with thier promised fixes. Honestly based on the trouble experience with these pinpointers i think they should be recalled. I would look to the XP or Garret Carrot but cant comment on either of these as i have yet to try them.
thanks for the info, i just cancelled my order from amazon...it should be flawless for the price
Agree.!!
Lol none of them are even close to being perfect lol . I have owned 4 kinds and there all about the same
The 35 is a pos. Mine just shuts off when it gets close to a target???? I know right. I miss my garrett. Just cant afford one right now
How do u turn off the ferrous sound please
How do you get warranty service? I reached out to them multiple times and haven't had a response. Ours beeps continuously on switching on! Sometimes resetting helps but not always! Good video... Shall try ground balance next time
For warranty just return to the place you purchased it. The guys at the shop were great.
Thanks for the insight on this
Too easy.
Thank you 😊
Thankx mate helps heaps
nice video brother 👍
Thank you friend.
@@bakerzinc7320 sip
Just got my 35 yesterday, tried to use it under water, nightmare, tried restarting underwater to balance it, had to turn sensitivity down to almost zero before it would not just beep like mad, not too impressed with it for the money I paid.
Tried doing the ground balance as you suggested works a lot better
I don't even bother using mine under water.
...lol... Very first time I turned mine on all it did was scream that's how I found out about number one 🤣🤣🤣
Just bought a eqanox 800 today its still in the b oox. Cant afford a pinpointer yet but i do have my garrett one for now. You wwould think if you van buy a electrick toothbrush for $60 and it has a charging system where you just sit it in the stand that they could do it for the pinpointer considering the price there wanting. I still have my eqanox in the box but started reading the paperwork. It sounds like i need to buy a 2 amp usb charger is this correct. I sent a message ogg tonight to minelab asking this before i take it out the box. Enjoy you info.look forward to learning more if i end up keeping it cheers Andy
Sorry for the late reply. The equinox comes with its own charger. I would stick with your garret pp for now. I've heard they work fine.
I have same problem to much money for junk just started clicking after 7 months of use could have baught a good one for that kind of money what a dirty sham this meny ppl having the clicking problem im discusted
This is 3 years old an they havent listen cause it the same make so if everyone would send them back an stop buying them maybe they will listen untill people boycot a company they want listen
Mam Makro pointera już 3 lata i jest ok i dużo tańszy od minelaba pro find 35. Pozdrawiam 👍 🇵🇱
Słyszałem, że makro też jest dobre. Może kupię i spróbuję. Dzięki
Pozdrawiam na święta 🌲❄️🎄wszystkiego najlepszego 👍🇵🇱
See all they had to do was admit the problem and fix the problem that they knew existed but NO they blame everyone and everything rather than admit the problem is theirs-if your goods are faulty Federal law says- repair -replace- refund-they will spend 5000$ to save a legally required refund of 250$ this is not the only issue Minelab have with there detecting gear and they know it.
I've never been impressed by the Minelab pin pointers hence I use a different brand.
Which one have you got?
Hi so what brand do you use
@@rocar716 I was using a garret but bugger me just a few weeks ago I went out and bought a minelab pro find 35 and to be honest its not a bad bit of kit compared to the older unit I had troubles with many years ago.
My unit died not even a year old after it dropped from my bag and minelab repair said it's my fault and I am on my own lol!!!
Well I guess in that case it's a bit hard to ask for warranty
Hi Travis, under the Australian Consumer Law, every product sold has to be 'reasonably durable'. This is independent of what the manufacturer's warranty does or doesn't cover. Go back to them and say you are relying on the ACL and a product like this, designed for use in the bush, should be able to take a few knocks. Link - www.accc.gov.au/consumers/consumer-rights-guarantees/consumer-guarantees
Everything you discussed is exactly my experience also. Minelab profind35 is junk. Love my equinox but Minelab should really be ashamed of this product. I have a $20 chinese pinpointer that is more reliable than the profind. If I were Minelab, I would be embarrassed and try to resolve the problem as quick as I could.
Also my unit has a really high pitch squeal that is constant. Anyone elso notice this?
Minelab, get it together. I would have payed $200 if it was actually what you promised. Im deeply disappointed.
Are you a poacher?
Only eggs.