Yamaha Thundercat Carburettor Clean

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ธ.ค. 2021
  • Yamaha Thundercat Carburettor Clean How did this bike even fire up with carbs like this take a look and see what we found in the bowls..
    If you would like to support my Channel, You can check out my Amazon Wish List and buy something for the channel.
    www.amazon.co.uk/hz/wishlist/...
    Merch Store www.ebay.co.uk/itm/165190133418
    Stuff I use.
    My filming equipment.
    Huawei P30 Pro :amzn.to/2CImtyA
    Rode Wireless Go Mic: amzn.to/3h8WP5n
    Boya external microphone: amzn.to/3g3zZv9
    Tools..
    DeWalt Drill and Impact driver :amzn.to/3g51C71
    Wire stripper: amzn.to/3g6RUkK
    US Pro Driver Bit Set: Screwdriver Bits Torx / PZ / PH / Flat Hex Spline Extra long Security 50pc AT822
    Music creditited to Kevin Macleod www.incompetech.com
  • ยานยนต์และพาหนะ

ความคิดเห็น • 105

  • @user-yn7cr5fi8z
    @user-yn7cr5fi8z 2 หลายเดือนก่อน +1

    New to this channel. This guys videos are great, very informative with much detail. My son just bought an 02 yzf and im gonna be going through the entire engine. Keep posting vids my friend, i wouldnt know where to begin without them

    • @ProjectMan
      @ProjectMan  2 หลายเดือนก่อน

      Nice one enjoy 👍

  • @alandykes2519
    @alandykes2519 2 ปีที่แล้ว +2

    Fantastic job Gary it is amazing the bike started with the carbs in that state 👍👍👍👍

  • @sdone7672
    @sdone7672 2 ปีที่แล้ว +2

    Nice work Gary. 👍

  • @martinburgess4814
    @martinburgess4814 2 ปีที่แล้ว +2

    They were well cruddy, but clean now

  • @knah88
    @knah88 ปีที่แล้ว +3

    You’re a life saver! Thank you so much for making this video!

    • @ProjectMan
      @ProjectMan  ปีที่แล้ว

      Cheers bud 👍🏻

  • @chrisgray2686
    @chrisgray2686 2 ปีที่แล้ว +4

    them carbs were shocking well done on the clean Gary keep the videos coming

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Cheers Chris 👍🏻

  • @therat5680
    @therat5680 2 ปีที่แล้ว +1

    Well done Gary great job thanks for the video,keep up the good work 👍

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers mate 👍🏻

  • @normsmowers4758
    @normsmowers4758 2 ปีที่แล้ว +1

    Worst I have seen them carburetors nice clean up job 👌👍

  • @pmgmotorcycles
    @pmgmotorcycles 2 ปีที่แล้ว +1

    Great Video! Thanks for Sharing.

  • @a11csc
    @a11csc 2 ปีที่แล้ว +1

    awesome gary

  • @anfieldroadlayoutintheloft5204
    @anfieldroadlayoutintheloft5204 2 ปีที่แล้ว +2

    well done gary good job keep up the good vid on the channel thanks lee

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers Lee 👍🏻👍🏻

  • @fixitorstripitGardenmachines
    @fixitorstripitGardenmachines 2 ปีที่แล้ว +1

    Superb work so far Gary sounds sweet. Catch you in the next one

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Cheers Neil 👍🏻👍🏻

  • @gravelyman
    @gravelyman 2 ปีที่แล้ว +1

    Nice carb cleaning job. I like your vintage Texaco sign. I had a Texaco station 40 years ago.

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Nice one that sign is a reproduction 👍🏻

  • @valborchardt3596
    @valborchardt3596 2 ปีที่แล้ว +1

    My goodness Gary, those carbs were in a shocking state, well done to you. You did good….thank you

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers thank you 👍🏻

  • @robstahl2531
    @robstahl2531 2 ปีที่แล้ว +2

    It's a long time since I've seen that much crap in a bank of carbs...well done Gary..

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers rob thanks for watching 👍🏻

  • @grasscutterpalmer3746
    @grasscutterpalmer3746 2 ปีที่แล้ว +1

    bike was sounding better than when you first started it

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers Tim 💪🏻

  • @Ivory663
    @Ivory663 2 ปีที่แล้ว +1

    Doing well Gary channels doing great! Wicked content and merchandise is excellent quality! Nice one mate

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Thank you 👍🏻

    • @Ivory663
      @Ivory663 2 ปีที่แล้ว +1

      @@ProjectMan looking forward to your new project

  • @andy_v4443
    @andy_v4443 2 ปีที่แล้ว +1

    👍👍👍 good stuff Gary lad 👍👍👍

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers Andy 👍🏻👍🏻

  • @paulstir
    @paulstir 2 ปีที่แล้ว +2

    I thought clean my Honda mower carb was a crap job 🤦‍♂️, you had your hands full there Great turn round Gary , & 10p for the cleaner 😂 , gotta love the old man comes wandering in as soon as there’s a bit action haha great stuff , looking forward to the next bud 👍

  • @henrymurawskibigdogrepair
    @henrymurawskibigdogrepair 2 ปีที่แล้ว +1

    Nice job Gary

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Thank you Henry 👍🏻

  • @mee981
    @mee981 ปีที่แล้ว +1

    Bon boulot mec👌👌👌

  • @paulbudford
    @paulbudford 2 ปีที่แล้ว +1

    Wow those carbs were the worst I've seen. Amazing it ran at all.

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Cheers Paul 👍🏻

  • @jonnyroberts225
    @jonnyroberts225 9 หลายเดือนก่อน

    Same bike as mine and also in same colour scheme it would appear. Ideally should have checked all the float bowl levels whilst the carbs were off, think its something like 12mm below the marks on each carb. Also grab a cheap 4 gauge vacuum balancer, makes that idle sound even better and will run smoother on the road.

  • @MichelMarie-vh4lp
    @MichelMarie-vh4lp ปีที่แล้ว +1

    Thank you very much for your video on the yamaha thundercat carburetor it helped me a lot to restore the carburetor of my motorcycle 👍🏻👍🏻👌🏻👌🏻👌🏻

    • @ProjectMan
      @ProjectMan  ปีที่แล้ว +1

      Your welcome 👍🏻

    • @MichelMarie-vh4lp
      @MichelMarie-vh4lp ปีที่แล้ว +1

      @@ProjectMan my motorbike runs like a Swiss clock now 😉👍🏻👍🏻

    • @ProjectMan
      @ProjectMan  ปีที่แล้ว +1

      Nice one 👍🏻👍🏻

  • @martincraig1974
    @martincraig1974 2 ปีที่แล้ว +1

    Nice bike Gary

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers martin 👍🏻

  • @Robsenginerepairs
    @Robsenginerepairs 2 ปีที่แล้ว +1

    Worth there weight in gold them cleaners mate looked like new when finished good job mate

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers rob great bits of kit👍🏻

  • @DTMotorcyclesEssex
    @DTMotorcyclesEssex 2 ปีที่แล้ว +1

    Core the state of them carbs good job gal I'm surprised it even ran with them float bowls gunked up that much 👌🏻

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      I was surprised to Dan 👌👌

  • @steven907
    @steven907 2 ปีที่แล้ว +1

    Nice bit of work there Gary mate

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers bud 👍🏻

  • @DB71170
    @DB71170 2 ปีที่แล้ว +1

    Might be worth putting an inline fuel filter....sounds sweet.

  • @tinkeringtaylor3053
    @tinkeringtaylor3053 2 ปีที่แล้ว +1

    Great carb clean Gary especially with that crap in.I got myself one of them jumper packs after your dads review and it's been a godsend.

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Handy bits of kit nev 👍🏻

    • @Kyokunek
      @Kyokunek 2 หลายเดือนก่อน +1

      Which jumper pack was it?

    • @ProjectMan
      @ProjectMan  2 หลายเดือนก่อน +1

      Topdon 1200

  • @NatsNackersYard
    @NatsNackersYard 2 ปีที่แล้ว +3

    Got to be happy with that mate.

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      What a state they was in nat never had anything like that before 👍🏻

    • @NatsNackersYard
      @NatsNackersYard 2 ปีที่แล้ว +2

      @@ProjectMan me neither. Nasty! It ran so it obviously wants to live!

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      💪🏻💪🏻

  • @themowerman
    @themowerman 2 ปีที่แล้ว +1

    A good job.. sounds nice.. they was a funny noise at the end . Oh sorry it was the old man lol

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      😂 I'm sure he will have something to say about that.

    • @retrorestore
      @retrorestore 2 ปีที่แล้ว +2

      When you are a big UK TH-camr, you are above comments like that

    • @themowerman
      @themowerman 2 ปีที่แล้ว

      @@retrorestore comments like what ?

  • @dagenhamdave2611
    @dagenhamdave2611 2 ปีที่แล้ว +1

    sounds good now mate

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers dave 👌

  • @MINIMOTOMADNESS
    @MINIMOTOMADNESS 2 ปีที่แล้ว +3

    well done fella,top job,i must clean my xr250r carb,its starting to leak when the fuels turned on,

    • @AliMackMechanical
      @AliMackMechanical 2 ปีที่แล้ว +2

      How's it going buddy

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +3

      Cheers bud 👍🏻

    • @MINIMOTOMADNESS
      @MINIMOTOMADNESS 2 ปีที่แล้ว +3

      @@AliMackMechanical dude i"m good too,hope your well?project man rocks,just like his pops martin,

  • @jaayjr2516
    @jaayjr2516 2 ปีที่แล้ว +1

    Dang you made that look easy this 1 looks like its gonna be alot harder than that unfortunately

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers bud 👍🏻

  • @petefroud5308
    @petefroud5308 2 ปีที่แล้ว +1

    Good job Bert . See old Hinge makes a appearance .

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      I'm trying to promote him a bit Pete 😂

    • @petefroud5308
      @petefroud5308 2 ปีที่แล้ว +1

      @@ProjectMan 🤣🤣🤣🤣

  • @philipnewton7942
    @philipnewton7942 2 ปีที่แล้ว +1

    Gaza
    Those carbs were bad now the engine can suck the fuel through clean jets it sounds just perfect mate your doing a good job it is years of neglect and none servicing this bike will take down the road again like it's not done for years
    Phil In stoke

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers bud sounds sweet now 👍🏻

  • @STTC
    @STTC 2 ปีที่แล้ว

    Now I know why the brake reservoir looked so bad too, something tells me this bike has had zero maintenance from new, fan video, just catching up with all my favourite youtubers

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers Steve 💪🏻👍🏻

  • @jomarwilks
    @jomarwilks 2 ปีที่แล้ว

    Could have put them in the ultrasonic cleaner it would have saved you some time cleaning, nice job

  • @hughbrackenbury8040
    @hughbrackenbury8040 ปีที่แล้ว +1

    I'm loving the tent garage. Just what I need. Did you buy it or make it?

  • @josh19884
    @josh19884 2 ปีที่แล้ว +2

    the two cylinder keys look like a bike lock keys or the disc lock you put on the wheel

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Disc lock bud. 👍🏻

  • @hedgehog5705
    @hedgehog5705 2 ปีที่แล้ว +1

    🏍️

  • @allanmason7544
    @allanmason7544 2 ปีที่แล้ว +1

    nice video gary what is that music called

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Sand castles it was on the TH-cam library

  • @AliMackMechanical
    @AliMackMechanical 2 ปีที่แล้ว +1

    They where well full of crap Gary mate. Lol ten pence find should be a good bike for someone in the spring.

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Cheers Ali crazy it even run 😂

  • @sirmoney2762
    @sirmoney2762 8 วันที่ผ่านมา +1

    I have to put new diaphragm on my carbs...is this a hard job to do once carbs are off??? Please any help is needed

    • @ProjectMan
      @ProjectMan  7 วันที่ผ่านมา

      Easy when carbs are off

  • @grosumihai9341
    @grosumihai9341 3 หลายเดือนก่อน +1

    Is oring or rubber seal at minute 4:45 ?? Becouse mine are very flat . Thankyou

    • @ProjectMan
      @ProjectMan  3 หลายเดือนก่อน +1

      Yes rubber oring

    • @grosumihai9341
      @grosumihai9341 3 หลายเดือนก่อน +1

      @@ProjectMan you do a good job , i apreciate !! Thankyou

  • @CortinasAndClassics
    @CortinasAndClassics 2 ปีที่แล้ว +1

    Oh my word those poor carbs :(

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Not to healthy 😁

  • @garyclifton2180
    @garyclifton2180 2 ปีที่แล้ว +1

    God they look a mess gaz but sounds awesome now

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว

      Cheers bud 👍🏻

  • @daveallen524
    @daveallen524 2 ปีที่แล้ว +1

    How long did that take to do?

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Not long within the hour

    • @daveallen524
      @daveallen524 2 ปีที่แล้ว +1

      @@ProjectMan always doubtful of trying anything like this on mine but maybe I should just get on and do it 👍🏻

    • @ProjectMan
      @ProjectMan  2 ปีที่แล้ว +1

      Go for it mate 👍🏻

  • @mr1pearl
    @mr1pearl 2 ปีที่แล้ว +1

    carbs so dirty oh my !!!