I really like how the narrator is doing a "How It's Made" voice. Makes the content absorb into my brains better. Captivated by a guy talking bout some toilet repair.
Thanks for the video. I just finished replacing the flush valve and flapper and it all went smoothly. I always thought the 'guts' of a toilet were difficult but it's all very simple.
Very nicely done. Thank you! This helped me A LOT! I especially appreciated a description of the tools needed and a shopping list, complete with photos. Again, Thank you!
Thank you for posting this! Your videos are very helpful! I was able to replace my flush valve all my by myself. It was nice not having to call a plumber! 🤗
These videos helped me replace all the parts in my tank to fix a long standing leak, which I had been putting off because I thought it would be difficult to repair. It was very easy and didn't take too long! Thank you very much!
Really well done video and very helpful. After watching it, I felt confident going out, getting the materials I needed and replacing the "flapper" / flush valve. I would note: If your toilet is older (mine was 7 years old), it is probably a good idea to purchase new bolts for the tank since re-using the 3 existing bolts resulted in 3 leaks for me. I fixed the leaks by putting vasoline and then thread on the threads nearest the bolt head, but probably best to buy new bolts.
Excellent video. It's hard to find a video that explains that you have to tighten the flush valve nut with channel locks, not hand tighten. Thank you very much.
Great video... as a novice,I would also suggest not overtighten the bolts for the tank and run the risk of cracking the tank. If that happens,might as well replace the whole thing.
Another simple fix for running toilets is the simplest of all; check the chain on the flapper to see if it’s too long. When the flapper chain has too much play it can be sucked into the flapper which cause constant running.
Thanks for the clear demonstration! I was able to make the repair in just under an hour with only a couple of minor hitches. The replacement valve I bought was a flapperless one, which confused me for a minute. But it all went very well, thanks to the confidence your video gave me.
I would also mention that when replacing the tank gasket the little nuts and bolts may come with additional washers and nuts depending on the type of gasket in use (ones with the ears or not). I figured with the sponge gasket you've got there you should probably have had bolt head then gasket then tank then washer then nut then bowl then gasket then washer then nut. But hey, if it don't leak, that's all that matters.
I wasn't sure about the second bolt gasket but you're right as verified here: www.fluidmaster.com/toilet-problems/installing-resolving-leaks-tank-bolts/ Most important, no metal washer in the tank.
What if there are leaks? That's always my challenge. I've changed all three toilets in my home numerous times using the recommended instructions but there's nothing mentioned about what to do to fix leaks. If a leak happens, I take everything apart and re-seat it all. I'm currently on my 4th iteration of re-seating on one particular toilet. This process started a week ago with iteration 1. Hopefully, this time it will finally be water tight. One other thing - the rubber gasket that fits on the threaded portion of the flush value must be the one for your particular toilet manufacturer and model. In my experience, a "universal" rubber gasket will not work.
You should mention that the overflow tube may need to be cut, if the top of the overflow tube is higher than lever handle opening water will leak out there if the fill valve should ever fail to shut off.
is this the reason my toilet takes forever to fill ,and i hear a flow of water at bottom of th e tank,, and in my basement where the toilet lines up,,after i flush,,its a new assembly inside,,but,i dont think i should hear water trickling thru the pipes while its filling the tank,,or do i need a new toilet all together,,please help
mine has a gasket attached, i can remove one section to get to the nut and replaced as said but now it leaks, going to but new nuts and bolts. if the news shows a mass fire of a town home and a crazy lady with cats and dogs watching it burn down you know I could not get it too stop leaking
Maybe I missed it but you said in part 1 that it is difficult to know where the leak is coming from so why would you use the same flapper valve? Why not get all new parts if you are going to do all that work? Again maybe i missed it, but it seems like you were using some of the old parts?
I am sure this is a common problem yet it is not addressed: What if after installing the correct flush valve you still have a significant leak? (like it flooded our floor!??)
I don't see how it is necessary, at least not with this design where the large sponge gasket goes around the nut. If water leaks past the topside flush valve gasket it's going to leak down the large threads past that large nut into the bowl regardless of any washer gasket on the large nut. The large sponge gasket around the nut is what keeps some of the high volume of water during a flush from splashing out since there isn't a tight connection between the flush valve and the bowl.
I got a drip and can't tell where its coming from. I added 'blue' to the water to see if it would give me a trace location but the drip is so slow I can't tell. very frustrating. I've taken the toilet apart about a 1/2 dozen times.
@@rosskstar I changed out all the internals and the drip is gone. My guess is it probably was the overflow tube. One of those cases where I was defeated and took the easy way out.
@@equallywrong lol and 8 years ago at that. I've been knee deep in fixing mine - just finished minutes ago. I have to relearn how stuff works when i only deal with it twice a decade.
Let's see if someone can answer this question I replaced everything on my toilet and I mean everything the bolts the washers the flush valve the water filler everything and I connect everything flush the toilet with no problem it will fill up the tank with no problem no leaking onto the floor but if I shut off the water valve go back to the toilet within 2 hours and turn the water back on it will start to fill up again like someone practically flushed the toilet when no one has the water leaks someway somehow and I can't see where it's leaking from remember the water is not leaking on the floor or anything I can stand there and stare at the toilet and no water is going into the toilet which makes no sense I'm going to say it again I wait until it fills up completely and stops I will then shut the water off at the bottom of the toilet come back in about 3 hours and the water level will go down about 2in or 3in it makes no sense if I were to sit there for two or three hours I will hear the toilet come back on and starts to fill up again keep in mind I replaced everything brand new now I want to see if someone can help me with this. And that is the reason why I replaced everything in the first place because I kept doing exactly what I just finish saying it was doingp
I hate my toilet: I did all this, and because mine is a 50+ year old toilet, the valve broke, now I need to just get a new toilet and hire a guy to fix it. good walkthrough though.
I purchased a very nice 1993 home that had that master bathroom completely carpeted including the toilet area. The bath was on a slab, and eventually when I renovated, I was surprised at how clean the area under the carpet was around the toilet. I was expecting bad. Anyway, the room is tiled now, however, I do miss the nice warm soft feel of the carpeted bath. Carpet in bathrooms was a trendy thing in the 90s.
I really like how the narrator is doing a "How It's Made" voice. Makes the content absorb into my brains better. Captivated by a guy talking bout some toilet repair.
I searched for ages to find out how to do this before I came across your videos. They're excellent, and exactly what I needed. Thank you!
Thanks for the video. I just finished replacing the flush valve and flapper and it all went smoothly. I always thought the 'guts' of a toilet were difficult but it's all very simple.
Thank you! I watched Part 1 and Part 2 of your videos and successfully replaced the flush valve and 2" flapper assembly myself.
Very nicely done. Thank you! This helped me A LOT! I especially appreciated a description of the tools needed and a shopping list, complete with photos. Again, Thank you!
Thank you for posting this! Your videos are very helpful! I was able to replace my flush valve all my by myself. It was nice not having to call a plumber! 🤗
These videos helped me replace all the parts in my tank to fix a long standing leak, which I had been putting off because I thought it would be difficult to repair. It was very easy and didn't take too long! Thank you very much!
Really well done video and very helpful. After watching it, I felt confident going out, getting the materials I needed and replacing the "flapper" / flush valve.
I would note: If your toilet is older (mine was 7 years old), it is probably a good idea to purchase new bolts for the tank since re-using the 3 existing bolts resulted in 3 leaks for me. I fixed the leaks by putting vasoline and then thread on the threads nearest the bolt head, but probably best to buy new bolts.
Heading out to get parts. Thanks to this video I can finally go to bed without having to turn off the water inlet valve. Thanks!
Excellent video. It's hard to find a video that explains that you have to tighten the flush valve nut with channel locks, not hand tighten. Thank you very much.
This video is so good, it’s so easy to follow.
Great video... as a novice,I would also suggest not overtighten the bolts for the tank and run the risk of cracking the tank. If that happens,might as well replace the whole thing.
Thanks ever so much for this. I very much appreciate the simplicity and detail of explination tutorial. God bless you!
Thanks for the video. I learned everything I needed to know about toilets in 2 minutes, in part 1!
I had just seen this - will be SAVING this, as PLUMBING is NOT one of my SPECIALTIES when it comes to MAINTAINING a house.
Another simple fix for running toilets is the simplest of all; check the chain on the flapper to see if it’s too long. When the flapper chain has too much play it can be sucked into the flapper which cause constant running.
Always check the crapper flapper.
THANK YOU, THANK YOU , THANK YOU! I've been looking for a clear and complete tutorial for weeks!
Thanks for taking the time. Helpful video.
Thanks, I had never done any plumbing before and was able to follow this with no problems and it worked!
Thanks for the clear demonstration! I was able to make the repair in just under an hour with only a couple of minor hitches. The replacement valve I bought was a flapperless one, which confused me for a minute. But it all went very well, thanks to the confidence your video gave me.
I would also mention that when replacing the tank gasket the little nuts and bolts may come with additional washers and nuts depending on the type of gasket in use (ones with the ears or not). I figured with the sponge gasket you've got there you should probably have had bolt head then gasket then tank then washer then nut then bowl then gasket then washer then nut. But hey, if it don't leak, that's all that matters.
I wasn't sure about the second bolt gasket but you're right as verified here: www.fluidmaster.com/toilet-problems/installing-resolving-leaks-tank-bolts/
Most important, no metal washer in the tank.
What if there are leaks? That's always my challenge. I've changed all three toilets in my home numerous times using the recommended instructions but there's nothing mentioned about what to do to fix leaks. If a leak happens, I take everything apart and re-seat it all. I'm currently on my 4th iteration of re-seating on one particular toilet. This process started a week ago with iteration 1. Hopefully, this time it will finally be water tight. One other thing - the rubber gasket that fits on the threaded portion of the flush value must be the one for your particular toilet manufacturer and model. In my experience, a "universal" rubber gasket will not work.
Hope you got this resolved!
thanks so much for this! helped me immensely!!
This was so simple even an old person could understand it. Now I just gotta figure out which one is our toilet and which one is our kitchen sink!
You should mention that the overflow tube may need to be cut, if the top of the overflow tube is higher than lever handle opening water will leak out there if the fill valve should ever fail to shut off.
That's one thing that isn't required
Stephen Snell it is required.. read through the comments people got flooding precisely from having an overflow valve higher than the handle
Thanks for the video helped me so much
At 47 thought I knew it all. Thank you 👍
is this the reason my toilet takes forever to fill ,and i hear a flow of water at bottom of th e tank,, and in my basement where the toilet lines up,,after i flush,,its a new assembly inside,,but,i dont think i should hear water trickling thru the pipes while its filling the tank,,or do i need a new toilet all together,,please help
mine has a gasket attached, i can remove one section to get to the nut and replaced as said but now it leaks, going to but new nuts and bolts. if the news shows a mass fire of a town home and a crazy lady with cats and dogs watching it burn down you know I could not get it too stop leaking
Thank you kind sir! Much appreciated.
Thank you for the video. Very helpful !
It doesn't show you using the rubber washers when reinstalling the tank.
How do you adjust it
A very good video on Do it Yourself! I learn alot! Thx for the upload! Do more and kick my aass again! Good lighting, and clear angles!
Maybe I missed it but you said in part 1 that it is difficult to know where the leak is coming from so why would you use the same flapper valve? Why not get all new parts if you are going to do all that work? Again maybe i missed it, but it seems like you were using some of the old parts?
He used new parts.
I just wanted to know how to fix a toilet flush valve!😢
I am sure this is a common problem yet it is not addressed: What if after installing the correct flush valve you still have a significant leak? (like it flooded our floor!??)
I noticed the old valve didn't have a gasket under the large plastic nut underneath. Is that flat gasket necessary?
Bob Hutcheson Yes it is necessary as it keeps water from leaking out
I don't see how it is necessary, at least not with this design where the large sponge gasket goes around the nut. If water leaks past the topside flush valve gasket it's going to leak down the large threads past that large nut into the bowl regardless of any washer gasket on the large nut. The large sponge gasket around the nut is what keeps some of the high volume of water during a flush from splashing out since there isn't a tight connection between the flush valve and the bowl.
Saved me from having to hire a plumber. Thanks!
Easy as pie! Thanks, now i know what all I will need to fix my 1979 toilet from the mysterious phantom drip and re-filling toilet.
Very helpful! thanks a lot!
Is that how u fix the tank on the toilet because the water in the tank over flowing
Good video
I got a drip and can't tell where its coming from. I added 'blue' to the water to see if it would give me a trace location but the drip is so slow I can't tell. very frustrating. I've taken the toilet apart about a 1/2 dozen times.
cracked overflow tube mebbe
@@rosskstar I changed out all the internals and the drip is gone. My guess is it probably was the overflow tube. One of those cases where I was defeated and took the easy way out.
@@equallywrong lol and 8 years ago at that.
I've been knee deep in fixing mine - just finished minutes ago.
I have to relearn how stuff works when i only deal with it twice a decade.
a perfect video ... great explanation ... thanks guys : )
ahhh...must be nice to work on a clean toilet and lay on a clean carpet :)
Ain't that the truth LoL 😀👊😂💯
Awesome video
Thanks for the video but imagine your personal preference being sawing mounting bolts
Did my first tank job, let me just say ( perfect).
Thank you.
THANK YOU..
AND THANK FOR NOT MAKING ME CALL A PLUMBER!!
Did NOT show replacing the float.
Thanks for the video man, also, I love the way you pronounce toilet.
Thank you for this!
Thx
its difficult
Who carpets a bathroom?
Thanks
VERY helpful! Thank you so much!
Let's see if someone can answer this question I replaced everything on my toilet and I mean everything the bolts the washers the flush valve the water filler everything and I connect everything flush the toilet with no problem it will fill up the tank with no problem no leaking onto the floor but if I shut off the water valve go back to the toilet within 2 hours and turn the water back on it will start to fill up again like someone practically flushed the toilet when no one has the water leaks someway somehow and I can't see where it's leaking from remember the water is not leaking on the floor or anything I can stand there and stare at the toilet and no water is going into the toilet which makes no sense I'm going to say it again I wait until it fills up completely and stops I will then shut the water off at the bottom of the toilet come back in about 3 hours and the water level will go down about 2in or 3in it makes no sense if I were to sit there for two or three hours I will hear the toilet come back on and starts to fill up again keep in mind I replaced everything brand new now I want to see if someone can help me with this. And that is the reason why I replaced everything in the first place because I kept doing exactly what I just finish saying it was doingp
Every hear of using a period to end sentences? Nobody's helped you because what you typed made their eyes bleed.
At 0:50 I see only what looks like a flat human head!
0:27 Missed a step: "Be sure to wash your hands after resting them inside the toilet bowl."
You don't need to do that it's unnecessary unless the toilet tank is dirty on the inside
You got a friend leaving you an upper decker or something?
Wanna know how I know that bathroom was painted in the late 90s?
He cut the bolt, but it reappears just after
This looks next to impossible.
Ok
And why couldn't both parts be made into ONE video?
For some people this is a lot to take in. Making it a single video would be information overload.
Horrible, he did not but pack the nuts and gasket with washer that go below the tank.
I hate my toilet: I did all this, and because mine is a 50+ year old toilet, the valve broke, now I need to just get a new toilet and hire a guy to fix it. good walkthrough though.
Toilets are easier to replace then the parts..two bolts and a gasket...litterally...dont hure a"guy".. You got this..
There is no sense taking the whole damn tank off just to change a flush valve. Unless the damn seat is leaking, leave the tank on
To get the lock nut off I think you do.
why don't you make a video showing how to change flush valve without taking the tank off...smart guy!
Who in their right mind would install carpet around a toilet? That's one of the weirdest things I've come across.
It's a strange world.
I purchased a very nice 1993 home that had that master bathroom completely carpeted including the toilet area. The bath was on a slab, and eventually when I renovated, I was surprised at how clean the area under the carpet was around the toilet. I was expecting bad. Anyway, the room is tiled now, however, I do miss the nice warm soft feel of the carpeted bath. Carpet in bathrooms was a trendy thing in the 90s.
i0
Anyone else distracted by the fact he wasn’t wearing gloves? They cost about .5 cents...
No. The water in the tank is fine and getting a bit of dirt on your hands won't kill you.
@VDR928
This channel is a joke 😂
TOILET!
Y U NO FILL WITH WATER!