COME ON NOKTA !!! Why Aint I Digging Iron ? - Iron Filter Update Needed | Metal Detecting

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ต.ค. 2024

ความคิดเห็น • 29

  • @MrBottlecapBill
    @MrBottlecapBill 20 วันที่ผ่านมา +2

    If you want to dig iron, then don't ignore the low tones. It's not difficult. 🤣 Get rid of BC as well. Does the triple score have pitch tones? If so that's what I use in those situations with my legend. I just did the stronger tones since they'll be more significant sized objects or higher conductive targets. Regardless of the numbers.

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  19 วันที่ผ่านมา +1

      Yes I know , but that’s not the point 🤣 if iron bias fully open on any detector I should be digging false positives

  • @PhilipWillsWorld
    @PhilipWillsWorld 18 วันที่ผ่านมา +3

    I've been using a patio scraper / weeding knife when detecting on that kind of ground. It makes it much easier. Thanks for the video.

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  17 วันที่ผ่านมา +1

      That’s definitely some “out of the box”retrieval utensils

  • @anthonywestwood8489
    @anthonywestwood8489 20 วันที่ผ่านมา +2

    Good topic Liam! I personally would like to see an iron filter update for the Legend/Triple Score that lowers the scale by a couple of points for those who like to hunt into and on the edge of iron. I think peeps would appreciate a video of you demonstrating the current iron filter settings in different scenarios, which tests the setting too its maximum capability. From using the Legend, I believe there’s definitely an iron bias which extends beyond the user settings.

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  18 วันที่ผ่านมา +2

      All the manufacturers don’t seem to like opening iron bias up too much , I feel it should be wide open and then we can close it to the level we want

    • @anthonywestwood8489
      @anthonywestwood8489 18 วันที่ผ่านมา

      @@HistoryRevisiteduk I agree with you entirely that the iron bias setting should be fully customisable to the detectorists preferred setting. I find even with the Legend set to zero, it still seems to have an inbuilt iron bias that precedes what is supposed be a nil zero setting. Myself, I like to hunt into the iron searching for intermingled non-ferrous targets. A lower iron bias setting should theoretically allow the intermingled ferrous and non-ferrous items to be classed as a good sounding non-ferrous target. So, having the option to lower the iron bias setting completely (fully open) would allow the user to decide how much hedging the bets on intermingled targets they want to risk. You make some really good videos, which discuss detecting topics not-touched-upon by other TH-cam channels. Thanks for being a maverick with the gonads to speak your mind when something isn’t quite right!

  • @jamesbarr1620
    @jamesbarr1620 15 วันที่ผ่านมา +1

    Should have came down to ayr beech Liam and we could have had a catch up 👍

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  15 วันที่ผ่านมา

      I’ll be back there in a few weeks , missing place already

    • @jamesbarr1620
      @jamesbarr1620 15 วันที่ผ่านมา

      @@HistoryRevisiteduk would definitely like a catch up Liam and show you my home town 👍

  • @noway423
    @noway423 20 วันที่ผ่านมา +1

    Hi. A smaller coil was perfect for that area. Recovery to the fullest helps a lot

  • @ohiofredl
    @ohiofredl 20 วันที่ผ่านมา +1

    Thanks for vid.

  • @Tesorosaprofunidad
    @Tesorosaprofunidad 20 วันที่ผ่านมา +2

    The Tesoro Pantera
    Will dig 0 Iron
    So far I never seen a detector like that
    It has 0 separation
    But no flat iron no rusty iron no bottlecaps
    Nokta needs a iron filter level 20 to be at Tesoro pantera Level on Iron

  • @TheDukesOfDerbyshire
    @TheDukesOfDerbyshire 20 วันที่ผ่านมา +1

    Jesus that thing was screaming gold ring, what a stinker 🤣

  • @andrewturner1799
    @andrewturner1799 14 วันที่ผ่านมา +1

    Liam. I just updated to 1.17. What's happened to IF, BC ST under recovery speed, all I have is GS and DT. Is yours the same ?

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  14 วันที่ผ่านมา

      Not done the update yet.
      But have you gone into single frequency mode as IF won’t be an option in single F

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  14 วันที่ผ่านมา

      Because sim multi can emit many frequencies at the same time , IF is like a ratio of both items , so different conductors like silver and iron, then a metal detector can down average , where the true ID of a good target can be dragged down by the iron

  • @norseman1137
    @norseman1137 20 วันที่ผ่านมา +1

    Those beaches are a tough gig with impacted pebbles n rocks ... I tend to take a geologist hammer out as the pointy end picks the rocks apart... The score looks ok to be fair

  • @diggingnashvegas
    @diggingnashvegas 20 วันที่ผ่านมา +2

    Didn't the latest update give the iron filter a 0 ?

    • @MrBottlecapBill
      @MrBottlecapBill 20 วันที่ผ่านมา +3

      For the legend yes. He's running bottle cap at 3 though which is going to eliminate a lot of iron.

    • @HistoryRevisiteduk
      @HistoryRevisiteduk  19 วันที่ผ่านมา

      Hopefully they will bring 0 to the triple score then , as it is the same platform, watch this space 😉

  • @ladislavschvarcz7475
    @ladislavschvarcz7475 20 วันที่ผ่านมา +1

    Dobrá práce 👍👍👍

  • @YorkshireMetalDetecting
    @YorkshireMetalDetecting 19 วันที่ผ่านมา +1

    I think its already getting to be like a Legend... I think they should leave it as it is as a high end beginer detector and let the people who want to tweek it like a legend buy a legend.

  • @jackhoootn5841
    @jackhoootn5841 19 วันที่ผ่านมา +1

    I like to run IF 8 BC 1 so I eliminate all big round iron