It's not, it would of changed a darker color before he etched it. Even if it was wrapped in foil or inert treated, it still would of grayed and required a complete polish to get "shiny" again.
Sometimes an artist just creates something that speaks to your soul. I’ve seen much fancier knives, bigger, smaller, varying materials, etc., but for an EDC I can’t imagine a better knife. Literally. If I had the talent to create a knife, this would be it. I absolutely love all your knifes, but this one is 100/100. Well done sir!
Now that is a great knife making tutorial ! With minimal tools no less ! Well done sir. Especially the jimping. I dont care if its heat treated or not. Thats just part of the process. Subbed.
Okay Koss, im a real fan. Im also making knives.. and i reakky have to know. After grinding you polished the knife with some abrasive powder and oil. What material was the sanding block? i also tried it with diamond powder.. but it always hollows out my ,,sanding steel" so i feel like i cant get a crisp, straight surface on my knife.
Did you make your own jig to angle the steel to bring out the angle of the blade? I'm trying to find someone to purchase from and I like your configuration.
3:02 what grit Dremel sanding attachment is that to get such fine polish result? Or is it just a worn out one. 6:59 great jimping skills without a checkering file. Gets a lot done with that Dremel. Which one is it? 250W?
You know you should start a shop at etsy or something......coz the knives you make and create is way more awesome than most of the premium manufacturers of knives.....in my perspective!
Вы сначала обрабатывали торцы на клинке, а потом уже делали накладки? Как их тогда так точно подогнать не обдирая прям на клинке? Хочу вот попробовать стоунвош сделать, но пока не знаю как с достаточной точностью до склейки всё это подогнать, чтобы после сборки не пришлось обдирать вместе с застоунвошенными торцами клинка.
Hi i want to have a go at making one to your template but want to enlarge it just a bit How do i enlarge it to be able to print a bit larger, say 10% larger ??
I wish these guys would say exactly what they’re doing. Some of us would like to maybe try to make a knife for ourselves or as a gift maybe and although it all looks very cool, what exactly are you using and doing. Even subtitles would be helpful.
@@markvinny30 the billet is already heat treated to hrc60 previous to any work. I believe that is the reason no heat treat is shown on the video. But I will try a Cobalt drill. I am just wondering if heating the hole locations while moist wrapping the rest of the blade will soften the heat treat.
What about heat treating?
Its heat treated
watch this - th-cam.com/video/L-cjlXayKMs/w-d-xo.html
Koss that's awesome 👍👍
this still does not show the heat treat etc... Unless I missed something of course
If its heat treated how were you able to drill through it so easily?
It's not, it would of changed a darker color before he etched it. Even if it was wrapped in foil or inert treated, it still would of grayed and required a complete polish to get "shiny" again.
Sometimes an artist just creates something that speaks to your soul. I’ve seen much fancier knives, bigger, smaller, varying materials, etc., but for an EDC I can’t imagine a better knife. Literally. If I had the talent to create a knife, this would be it. I absolutely love all your knifes, but this one is 100/100. Well done sir!
wow, such precision with all the tools! beautiful work.
Beautiful knife. Very versatile and usefull. I use very similar handle shape and I like it a lot.
Классный фикс!... очень удобный и не большой. Годен для всякой работы. Купил бы такой.
Uno de los cuchillos que mas me ha gustado. Por lo sencillo y por su color negro. Felicidades.
i just love the acid wash you put on your knives. it's so subtle and beautifully reserved compared to some harder etches others do.
Nice Knife Making Tutorial for fixed blade. I haven’t made a fixed blade yet, but thinking about it.
The shape, grind, grip, jimping, and minimalist clean design are everything I have been lioking for in a knife but can never find.
No heat treat?
You have an amazing “eye” and fine motor skills. I’m in awe!
Beautiful knife 👍 love the shape, did you design it ?
Хотелось-бы посмотреть ковку топора в Вашем исполнении.
Absolutely beautiful. Thanks for sharing.
Now that is a great knife making tutorial ! With minimal tools no less ! Well done sir. Especially the jimping. I dont care if its heat treated or not. Thats just part of the process. Subbed.
you have excellent hand skills-very precise work and attention to detail- professional result with only simple tools
wow, really awesome work,,,,, neat n creative. you are the expert... jooos knife👍👌
beautiful work and i enjoyed your video keep up the great work
Outstandingly great job, complex design made to look simple. Much talent needed to do this!
Your knives are so beautiful. Thank you for sharing your work.
I love it! Quality content as always.
Классная работа!
Это чёткий ухватистый крутой нож хоть для рыбалки хоть для пикника, вау респект мастеру!!!!😊😉😄😃😀👏🖒👍👌💪🏅🇷🇺
That is a piece of artwork
Okay Koss, im a real fan. Im also making knives.. and i reakky have to know. After grinding you polished the knife with some abrasive powder and oil. What material was the sanding block? i also tried it with diamond powder.. but it always hollows out my ,,sanding steel" so i feel like i cant get a crisp, straight surface on my knife.
Did you make your own jig to angle the steel to bring out the angle of the blade? I'm trying to find someone to purchase from and I like your configuration.
@Jorn Navarre thanks for sharing
Un superbe travail une fois de plus bravo on en veut encore
I was critical of your method at first. Seemed to me a bit awkward, disorganized. But the result? Wow. You've got real talent!
I would've like to see the heat treatment and the blade sharpening but else than that your video quality was excellent, great looking knife!
Roomies Garage pretty sure he starts with an already heat treated steel. I would like to also see the sharpening though.
@@aaronpage1822 absolutely
Como sempre, mais um trabalho inspirador. Parabéns!
Beautiful knife.
Hello! Very good work!
Is that pure Iron III Chlorid or a mix?
And can you please give the Template link :)
it was water solution of ferric chloride
I added the template in description
Which steel are you using for the knife?
Very nice knife 💪💪
You have some amazingly clean knives! Thanks for sharing. Subscribed!
What is the brown toothepast-ish stuff you put on the blade when sanding?
Looks like Gough knife template;)
I am wondering why you didnt use the band saw to cut out the knife shape at the start?
Its probably a wood cutting bandsaw thats not made for metal.
wow love it ,great job
Piękna robota!
What is the paste you put on when sanding? Thanks! Oh nice knife by the way!
very nice workmanship and knife.
3:02 what grit Dremel sanding attachment is that to get such fine polish result? Or is it just a worn out one. 6:59 great jimping skills without a checkering file. Gets a lot done with that Dremel. Which one is it? 250W?
Rockwell? Heat treatment & tempering?
Really great looking blade! You need to see about getting a makers mark to put on there.
What is the chemical at 9:55
You know you should start a shop at etsy or something......coz the knives you make and create is way more awesome than most of the premium manufacturers of knives.....in my perspective!
What the time into the ferric clorithe?
Amazing!
its very pretty :D
Beautiful knife. Be careful with that G10 dust though.
I really like the knife, you did a great job! Just have a question, what kind of diamond paste do you use? Thanks
You did not temper?
This is a beautiful knife u have made my friend, i just love it, ı hope ı can manage to make one like this, well done, congralations 👏 👏 👏 👏
Now that's a nice knife !
Great work, what bit are you using to do that jimping and boring out the lanyard hole??
Did you wipe the excess glue off immediately after you clamped it? I made a similar knife and the tang is a different color.
Great knife! What did you use to darken the blade? Steel blue? Cheers
no. that's ferric chloride. you can get it on amazon at a pretty decent price.
Fantastic
whats that contraption you put on the stock blade when you started forming the grind? I need that.
In a grid down scenario, I want you on my team kid.
That's a good functional design.
How did he made the blade black?
how much millimeter was a flat steel?
Great knife...good job!
Was the steel heat treated?
steel heat treated is missing ?
i think it was heat treated to begin with. thats y he had to continuely wet it during the cutting and drilling
I kept asking myself the same question. I did not see it.
great knife
Вы сначала обрабатывали торцы на клинке, а потом уже делали накладки? Как их тогда так точно подогнать не обдирая прям на клинке? Хочу вот попробовать стоунвош сделать, но пока не знаю как с достаточной точностью до склейки всё это подогнать, чтобы после сборки не пришлось обдирать вместе с застоунвошенными торцами клинка.
ooooooou man I love this one
I missed the harden and temper cycle. Did tou start with hardened and tempered material?
yea, the blank was heat treated before grinding
What is the liquid.. Did you use at 13.30 min.. For sanding
Koss?
Beautiful work ...
beast mode...love it!!
Very interesting. What is the liquid being used at about 9.55, if you don't mind a stupid question?
It's the acid for etching the blade a darker color. Ferric chloride is the most common one
FeCl3 isn't acid, just to make it straight ;) But you're right, thats the most comon etching compound
That is a great knife. Thanks!
What brand needle files are those that you used to profile the handle?
What fluid did you put the knife in, is it a motor oil?
Beautiful knife
Is it possible to have your videos made for the hearing imparted?
There is no talking of any sort in this video, unless you want to hear sped up noises from files
Thanks for sharing. Awesome job. GF1 😁😁😁😁😁😁😁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎
You didn't heat treat it , doesn't it requires heat treatment ?
Cool knife, Koss. You made this one in only 14 minutes. How long would it take to make me one?
Hi i want to have a go at making one to your template but want to enlarge it just a bit
How do i enlarge it to be able to print a bit larger, say 10% larger ??
Thank you
Beautiful knife!!!!
really nice ,,,, a few flap discs for your grinder at the start would save you a lot of time grief and cutting though
I wish these guys would say exactly what they’re doing. Some of us would like to maybe try to make a knife for ourselves or as a gift maybe and although it all looks very cool, what exactly are you using and doing. Even subtitles would be helpful.
Que líquido usaste para cambiar de color el acero
Love this knife and I am an avid subscriber. Q: How is one able to drill 60 hrc d2? Do you heat the spots you intend to drill in order to soften them?
Just use cobalt drills before heat treatment.
@@markvinny30 the billet is already heat treated to hrc60 previous to any work. I believe that is the reason no heat treat is shown on the video. But I will try a Cobalt drill. I am just wondering if heating the hole locations while moist wrapping the rest of the blade will soften the heat treat.
Классный режик 👍
Какой материал рукоятки?
thank you for great video. what do you use for black it? Iron III oxide?
ferric chloride
What are you using to give the blade a grey looking finisch?
ferric chloride
Идеальная форма!!!
beautiful !
Hi, could I get the template for this please?
what's the name of the stuff in the bottle??
I'm gonna assume its ferric chloride.
I like how you cut out the knife. Much safer than the way I do it.
Nice knife