I have GOT to get me some of that Mahogany Stain!!! I'm so impressed with the Front section, and the Trailer as a whole! I'll be watching the rest of them now. 😉
I had been dreaming about scratch building such a trailer to transport my Tanks. Thanks for taking time and effort to shoot and share your creation. Loving every single one of your videos.
WOW! Just WOW! You make it look so easy to do these great builds. I love your videos and really appreciate that you take the time to share them with us. Thank you so much!
Just awesome, Bob!!!!! I go into a trance-like state while watching your videos and I don't want it to end!!! I learned quite a bit from this video and I appreciate you taking the time to share your expertise and talent. Your videos are concise and informative without a whole lotta fluff. You edit out the bloopers and the keep the meat!!! C'mon Bob, I know there have to be bloopers......everybody has bloopers!!!! How about a blooper video........you falling off your chair, models crashing to the floor, camera snafus, you cussin like a sailor after getting a splinter in your thumb.....etc!!!! Your blooper video is sure to be every bit as entertaining as all your other videos. C'mon Bob, let's see the embarrassing stuff!!!!!!
@@HobbyconceptsLLC Ouch!!!!!! I bet that didn't tickle!!!! I'm sure you can recall your hot glue mishaps.......I certainly remember mine and I have the scars as proof!!!!
Can't wait to see the completion of this project. This is one hell of a build. I salute you sir. Can't wait to see the crane install also. I can't for the life of me figure out how 2 people can dislike this video?
On the 1:1 trailer the kingpin sits in a drop down pocket. So when you lower the deck to the ground the kingpin lifts up into the pocket. otherwise your neck balances on the pin
Hello bob i bought that tunigy battery that you recomended and also the tgy i6 transmitter, you have helped me bring my childhood dream hobby to life thank you.
AWESOME JOB BOB i AM FOLLOWING THIS WITH YOU i HAVE THE SAME TRUCK AND i WAS TRING TO FIGURE OUT WHAT TO USE FOR A TRAILER KEEP UP THE GOOD WORK SORRY FOR THE CAP LOCKS
Please show how you make some of the peices also talk more about the material used and where to purchase them I wouldve like to have seen how you made the plastic box but great job!
Yeah, probably should have shown that. Will do more in the next few video's on it. In the meantime I did show what I do with plastic in another video. Go to about the 13 minute mark in this video: th-cam.com/video/ca5qr6Fnvuw/w-d-xo.html
When's part 6 and can't wait for the review on the crane that you got i know is over 3 weeks ago and still waiting but thank for putting up stuff in pain american/English for us guys that haven't thought about doing some thing like this befor
That upper part of the neck looks fantastic! Do you know if the kingpin of the real trailer was perhaps moving up and down so the whole upper section lay fully on the ground and not on the kingpin? Looking forward to further progress.
One of my viewers wrote and told me on the real trailer the kingpin is removable. I was going to try that but could not figure out a way to make it strong enough. I expect to carry 50lp loads when finished.
I received my HG-P803 crane and YK002 16ch transmitter but unfortunately after activating the transmitter and receiver my crane does not respond. Can all channels do what can be the problem? Try to explain. Can connect the transmitter and receiver, so all functions work as well. I connect a servo and it works as it should. The transmitter gives a beep every time I switch, that's a bit strange. An LED flashes in the turning part of the lifting arm, but nothing else happened. I try to get in touch with the supplier but they don't respond. Is there a manual for this YK002 other than supplied, Can't wait for the video about this lifting arm.
I have GOT to get me some of that Mahogany Stain!!!
I'm so impressed with the Front section, and the Trailer as a whole!
I'll be watching the rest of them now. 😉
I hope you video alot more of your work. This is now my favourite youtube channel
Looking forward to the next step
WOW😲 Great job. You are a MASTER model make. Thanks for letting us watch you work. 👍
Fantastic work Bob, The quality of the work and you way you are using the angle iron is top notch. Looking forward to next instalment.
Looks awesome. Thanks for taking us along on the project.
I had been dreaming about scratch building such a trailer to transport my Tanks. Thanks for taking time and effort to shoot and share your creation. Loving every single one of your videos.
WOW! Just WOW! You make it look so easy to do these great builds. I love your videos and really appreciate that you take the time to share them with us. Thank you so much!
Looks great, can't wait for the next video. So nice to see someone building something and improvising.
Just awesome, Bob!!!!! I go into a trance-like state while watching your videos and I don't want it to end!!! I learned quite a bit from this video and I appreciate you taking the time to share your expertise and talent. Your videos are concise and informative without a whole lotta fluff. You edit out the bloopers and the keep the meat!!! C'mon Bob, I know there have to be bloopers......everybody has bloopers!!!! How about a blooper video........you falling off your chair, models crashing to the floor, camera snafus, you cussin like a sailor after getting a splinter in your thumb.....etc!!!! Your blooper video is sure to be every bit as entertaining as all your other videos. C'mon Bob, let's see the embarrassing stuff!!!!!!
I wish I had a video of when my x-acto knife rolled of the workbench and stuck in my leg. :-)
@@HobbyconceptsLLC Ouch!!!!!! I bet that didn't tickle!!!! I'm sure you can recall your hot glue mishaps.......I certainly remember mine and I have the scars as proof!!!!
You think you are not bad at something and then you watch you and never mind then
:( amazing job man love it so far
Keep up the good work and videos I’ve learned a lot about detailing
Can't wait to see the completion of this project. This is one hell of a build. I salute you sir. Can't wait to see the crane install also. I can't for the life of me figure out how 2 people can dislike this video?
Brilliant work, great video looking forward to next instalment 👍👍👍
On the 1:1 trailer the kingpin sits in a drop down pocket. So when you lower the deck to the ground the kingpin lifts up into the pocket. otherwise your neck balances on the pin
Was trying to actually figure out a way to do that and still make it strong enough to carry a 50lb load but gave up!
Hello bob i bought that tunigy battery that you recomended and also the tgy i6 transmitter, you have helped me bring my childhood dream hobby to life thank you.
I´ve greatly enjoyed following your progress as this interesting subject comes together before our eyes. Part 6 can´t come soon enough for me!
AWESOME JOB BOB i AM FOLLOWING THIS WITH YOU i HAVE THE SAME TRUCK AND i WAS TRING TO FIGURE OUT WHAT TO USE FOR A TRAILER KEEP UP THE GOOD WORK SORRY FOR THE CAP LOCKS
wow that is so beatifull you are so talented
Great project, loving watching this down in New Zealand!
Awesome work on the trailer
Wow, coming along very well!
looking really good!!
Awesome trailer!!
Brilliant job so far, well done
Please show how you make some of the peices also talk more about the material used and where to purchase them I wouldve like to have seen how you made the plastic box but great job!
Yeah, probably should have shown that. Will do more in the next few video's on it. In the meantime I did show what I do with plastic in another video. Go to about the 13 minute mark in this video: th-cam.com/video/ca5qr6Fnvuw/w-d-xo.html
Great work , looks amazing!!!!
So realistic👍👍
The trailer is coming along nicely. I think I have seen a video on that crane, the detail is really good but its performance was a bit slow.
This is very cool to watch.can you send me a list of the parts you used on the build from start to finish and where j can order them from
cool stuff
Genial
When's part 6 and can't wait for the review on the crane that you got i know is over 3 weeks ago and still waiting but thank for putting up stuff in pain american/English for us guys that haven't thought about doing some thing like this befor
Next part is almost done, should be up tomorrow (12/19/2019)
Hello bob, love your job, pls at the end of project can you share the plans for me to try on 3d printer ?
That upper part of the neck looks fantastic! Do you know if the kingpin of the real trailer was perhaps moving up and down so the whole upper section lay fully on the ground and not on the kingpin? Looking forward to further progress.
One of my viewers wrote and told me on the real trailer the kingpin is removable. I was going to try that but could not figure out a way to make it strong enough. I expect to carry 50lp loads when finished.
WOW, WOW, WOW!!!
Hi. Can you help me my hemmtt dont move forward and reverse sound and light working ok dont know what to check.
Thanks
I received my HG-P803 crane and YK002 16ch transmitter but unfortunately after activating the transmitter and receiver my crane does not respond. Can all channels do what can be the problem? Try to explain. Can connect the transmitter and receiver, so all functions work as well. I connect a servo and it works as it should. The transmitter gives a beep every time I switch, that's a bit strange. An LED flashes in the turning part of the lifting arm, but nothing else happened. I try to get in touch with the supplier but they don't respond. Is there a manual for this YK002 other than supplied,
Can't wait for the video about this lifting arm.
I have not looked at mine yet. Hope to get to it soon.
What will you be hauling on the trailer
A BIG Dozer
Your eBay link doesn't work in the UK.
Works ok for me in the UK but it does show that he currently has nothing for sale at the moment, that might be what you are seeing
Next video?
Building a few contract Tamiya Semi's but will be back to the trailer soon!
Was thinking the same thing Luke Jenkins but Bob explained why now 😊
Would you be willing to make a copy of the plans and sell them?
The drawings are free. Just email me for a copy. My email address is in the video description.
An you tell me where to. Buy the flox you use
First