Wow! Thank you for watching! I greatly appreciate it! Eyeballing works really well if you have the eyes for it. I can eye a swash plate and it is dead level every time. The FBL will definitely take out of it but a perfect setup just makes the Heli fly so much better!
another tip with zip tie, to avoid removing main head I'm using tape to fix zip tie or toothpick on main head, so I can do the same trick without removing the head.
I think Jeff gives invaluable insight into the heli hobby and I love him. But guys, just use a swash leveller or if youre really skint, just eyeball it carefully from all directions and then hover and trim it out in the FBL as required. Never failed me in all my time in the hobby.
Thank you! I greatly appreciate that! Yes, I agree 100% use a swash plate leveler. I personally don’t because I have got the eye for it. I could literally look at a swash plate and tell you if it’s level or not. But not everybody is like that and a leveler is just so much easier.
Thanks Jeff, I am new to the hobby and these sorts of videos really help me. I have been enjoying your flying videos for a while. Please do more tips/set up videos.
You’re welcome! I’m glad these videos help you. This is the best hobby in the world and definitely red these videos to help new comers. Tail setup is next!
Great guide, Jeff. I have a set of ajustable servos, and it makes things a breeze. Or alost... It's a set of Thetas and using the Theta control box. That can be a bit of a struggle, since it can be 'disconnecting - it self' again and again without end. I don't know if other people are having this struggle too? And chilled autum greetings from Denmark.
Thank you! I appreciate it. I absolutely love Theta servos. In my opinion, they are one of the best servos on the market! But! I can’t stand their program box. They really need to redesign or re-engineered the box to make it a lot easier for the user to do and to stop it from disconnecting all the time. It can be a real pain. That’s the only thing Torq servos have over them. Their program box is super simple and easy to use.
Hey Jeff, I'm going to dig out that Multiplex Twister, and see how big of a box it will take to get it to you. I don't know the dimensions offhand, but as I think I said, it's like 85% built. I'll Email you in the next few days. I would like it to go to you.
Oh wow! Thank you! I greatly appreciate that! I’ll make videos on it so you can see it fly! Send me a email. If you have the box dimensions and wait, I can email you a label so you just have to drop it off. Can’t wait!
Hi Jeff, I have a Fusion 180 which seems to fly a little tail heavy and I can't seem to move battery much more forward. Is a solution to have the swash plate deliberately slightly tilted forward?
@westhobbiesrc8051 thanks for the quick reply! :) I'm using a spektrum 450mAh 2s 50c JST (SPMX4504S50) with a JST to IC2 adaptor. Flying *without* auto level in IU1. Hovering doesn't appear to have much if any drift (difficult to tell as I'm still quite new and most of my hovering is in my lounge in confined space), but outside in forward flight it seems to require more forward cyclic input more of the time to keep it moving forward and if not given, tends to nose up a bit. Whereas my Infusion 120 seems to scoot along much easier with much less forward cyclic. Hope that makes sense!
If everything is 90° in the swash plate is level your links should be within a few millimeters off of each other. Of course, depending on the servo and linkage set up some of them are longer than other ones, but servo 90 and swash level is the most important thing.
Normally, yes, it really depends on the helicopter and the linkage set up not all helicopters will have equal links with each other. Depending on where the servo is located forward backwards, etc.
@@westhobbiesrc8051mine is a tron orion. I have a perfectly level swashplate at maximum throw in either direction.. I am using a align 550-700 swashplate leveler which fits perfectly. I have all the links measured out the same. On the other hand my lh servo arm sits higher
good job, zip tie trick is epic! I've always just eyeballed it and hoped the flybarless would sort it out 🤣
Wow! Thank you for watching! I greatly appreciate it! Eyeballing works really well if you have the eyes for it. I can eye a swash plate and it is dead level every time. The FBL will definitely take out of it but a perfect setup just makes the Heli fly so much better!
What a great looking Heli! Thumbs Up!
@@mobiushelitime Thank you! This build is definitely one of my favorites!
another tip with zip tie, to avoid removing main head I'm using tape to fix zip tie or toothpick on main head, so I can do the same trick without removing the head.
I think Jeff gives invaluable insight into the heli hobby and I love him.
But guys, just use a swash leveller or if youre really skint, just eyeball it carefully from all directions and then hover and trim it out in the FBL as required.
Never failed me in all my time in the hobby.
Thank you! I greatly appreciate that! Yes, I agree 100% use a swash plate leveler. I personally don’t because I have got the eye for it. I could literally look at a swash plate and tell you if it’s level or not. But not everybody is like that and a leveler is just so much easier.
Hey Jeff…. FYI you can leave the head on with the zip tie trick. I do it all the time.
@@NickWisdomRC I guess you can! Good to know.
Oh yes! Thank you for this - and greetings from Denmark.
Thank you for watching! I’m glad these videos are helping!
Thanks Jeff, I am new to the hobby and these sorts of videos really help me. I have been enjoying your flying videos for a while. Please do more tips/set up videos.
You’re welcome! I’m glad these videos help you. This is the best hobby in the world and definitely red these videos to help new comers. Tail setup is next!
Appreciate this video, thanks
I would like to make a video teaching how to assemble a helicopter model il goblin. I just bought this model.
Great guide, Jeff.
I have a set of ajustable servos, and it makes things a breeze.
Or alost... It's a set of Thetas and using the Theta control box.
That can be a bit of a struggle, since it can be 'disconnecting - it self' again and again without end.
I don't know if other people are having this struggle too?
And chilled autum greetings from Denmark.
Thank you! I appreciate it. I absolutely love Theta servos. In my opinion, they are one of the best servos on the market! But! I can’t stand their program box. They really need to redesign or re-engineered the box to make it a lot easier for the user to do and to stop it from disconnecting all the time. It can be a real pain. That’s the only thing Torq servos have over them. Their program box is super simple and easy to use.
I am not sure, but have you made a video for cable management, how you do it so neatly ?
Great info!! Great job jeff as always!! 👍🏻👌🏻
Thanks Don! I greatly appreciate it.
@ your welcome buddy!!!
Hey Jeff, I'm going to dig out that Multiplex Twister, and see how big of a box it will take to get it to you. I don't know the dimensions offhand, but as I think I said, it's like 85% built. I'll Email you in the next few days. I would like it to go to you.
Oh wow! Thank you! I greatly appreciate that! I’ll make videos on it so you can see it fly! Send me a email. If you have the box dimensions and wait, I can email you a label so you just have to drop it off. Can’t wait!
Hey mate, 420 Comp is getting done. Would you be able to make a build video on it. Cheers .
Thank you very much for the excellent explanations, that helps a lot.
Greetings from Switzerland
Reto
Thank you for watching! I’m glad these videos are helpful!
Hi Jeff, I have a Fusion 180 which seems to fly a little tail heavy and I can't seem to move battery much more forward. Is a solution to have the swash plate deliberately slightly tilted forward?
@@marcotibaldi5659 hello! What battery are you using? Is it drifting backwards? Are you using auto level or just normal hovering?
@westhobbiesrc8051 thanks for the quick reply! :) I'm using a spektrum 450mAh 2s 50c JST (SPMX4504S50) with a JST to IC2 adaptor. Flying *without* auto level in IU1. Hovering doesn't appear to have much if any drift (difficult to tell as I'm still quite new and most of my hovering is in my lounge in confined space), but outside in forward flight it seems to require more forward cyclic input more of the time to keep it moving forward and if not given, tends to nose up a bit. Whereas my Infusion 120 seems to scoot along much easier with much less forward cyclic. Hope that makes sense!
What Ikon2 would you recommend for a kraken 580, HD or non-HD? Using brushless Theta servos at 8.4v.
@@furion450 regular ikon 2 is all you need. HD is only for using a 2s Lipo to power servos like on a nitro.
@westhobbiesrc8051 Thank you! Love the channel, keep it up.
@@furion450 Thank you! I appreciate it! I’m glad the videos are helpful!
Are you saying 90 degrees matters more than than equal link length?
if its 90 and equal length links and swash is not level then wouldn't that mean that something is bent?
If everything is 90° in the swash plate is level your links should be within a few millimeters off of each other. Of course, depending on the servo and linkage set up some of them are longer than other ones, but servo 90 and swash level is the most important thing.
Normally, yes, it really depends on the helicopter and the linkage set up not all helicopters will have equal links with each other. Depending on where the servo is located forward backwards, etc.
@@westhobbiesrc8051mine is a tron orion. I have a perfectly level swashplate at maximum throw in either direction.. I am using a align 550-700 swashplate leveler which fits perfectly. I have all the links measured out the same. On the other hand my lh servo arm sits higher
You forgot to get it as mechanically close as possible first