1:45 "You're probably gonna go over here and say well, I wanna reset that pivot point.". Where? I can't see what you clicked on because everything is blurry, and I don't have that menu on top.
Dude, this is one of the most useful videos I've seen in my entire life about Zbrush, you've help me a lot and I'm sure you've help lots of people with this, may the universe bless you dude!
XD Glad I decided to watch until the end, the end has a completely different tip. Use your preview window and make sure your object fits ! Lags gone and hope this fixes other issues
nice another video looked up and here you are fixing a common problem nothing wrong with 240p just have to listen to his voice and the visual difference.
I was doing my first character for 5 days and i didn`t know what the hell was wrong :) Thanks to you I don`t have to start all over again :D THANK YOU!!!
@makeuploveculture I'm not sure whats turned on or off at this point haha. Thank You for your reply though!! I think my boyfreidn finally figured it out. But it's another story if i figure it out when hes not here lol
thanks for sharing! great tips! I was wondering, if I were to use an insert mesh on one side and then want the same topology to appear on the other symetry side what is the best approach?
I cannot get my Z Brush 4R2 to get it's symmetry on the X axis right. It's like diagonal rather than being straight across from each other. I've tried literally everything....nothing is working????? Please help me...I'm getting so frustrated and discouraged.
But what if you MOVE the object and want that object to stay in that position and want the symmetry to follow? God its hard asking you this trying to type. Because when I try this method your explaining, when I move my object, then use your fix, my object moves back to its original position, but I don't want my object back in that position ......
hi ı got a question : when ı use the symetry that brushes doesnt work simultaniously . I mean there is a different pressure both of them . how can ı solve this ?
mine has done the same did you ever figure out how to fix it because i have only just started using this and im already stuck .. if you could help me ill be very grateful thanks
I have a problem, if anyone can help please respond. My mesh is way too big in the preview window so I clicked unify and it turned out great in preview and symmetry is working again but it came out very small, which is okay but then my eyes were too big so I unfied them as well and they shrank too but not enough because they are just about big as the head. Is there a way to unify more sub tools at once or a way too unify properly because I would have to rescale, reposition eyes, hands, head.
Maybe try to lower the resolution to 4x2p cause this detail is abit overkill
If i had a penny for every pixel in this movie, my house would be foreclosed on and I would be giving out hand jobs to feed my self.
If you're looking for set pivot its under transform
thanks
Ahahhaha. Receive my like with wisdom!
but it moves the mesh, annoying
1:45 "You're probably gonna go over here and say well, I wanna reset that pivot point.". Where? I can't see what you clicked on because everything is blurry, and I don't have that menu on top.
He clicked on transform and he says exactly what pushes on if you listen carefully enough.
You just saved the project I was about to scrap out of frustration and ignorance. Thank you!
hey. IM a guy from Sweden. I´m an apprentice in sculpting and I had an issue with the symmetry. This video helped me out. Thanks!
You just saved my ass with that tip on how to re-center the symmetry line after moving the mesh on the world axis. THANK YOU.
Dude, this is one of the most useful videos I've seen in my entire life about Zbrush, you've help me a lot and I'm sure you've help lots of people with this, may the universe bless you dude!
Thanks, I was loosing my mind with this, I been looking in all forums and nothing appear , just here I found it Thank you man.
lol very informative but lel 240P
You record this with your flip phone?
thank you so much.
i was just getting frustrated why my symmetry was not working till i saw your video.
thanks a ton.
Twelve years on, this is still useful.
Your videos are always a big help, this one was no different, thanks. =)
thank you so much for the quick and concise answer!
Thanks- just what I needed in a hurry.
Because this was made in 2008, I understand the 240p. It's still a very good tutorial though, and taught me exactly what I want! thx
Great tutorial, but resolution is so small its hard to watch.
screw the haters, this video just kept a little more grey out of my hair. Thank you saint.
The res of this video is terrible, but the information is gold and works like a charm. Thank you.
OMG!! thank u dude!! this crap was fustrating the hell outta me!! u just saved my tablet from being thrown across the room :P
XD Glad I decided to watch until the end, the end has a completely different tip. Use your preview window and make sure your object fits ! Lags gone and hope this fixes other issues
gee thanks I was really looking for this simetry stuff
nice another video looked up and here you are fixing a common problem nothing wrong with 240p just have to listen to his voice and the visual difference.
That was incredibly helpful. Thank you so much. I hope you got that sainthood. :)
This is the best video on youtube!!
I favorited this because there is no way I will remember this when I get stuck from a stupid mistake.
My PC cannot handle this 60fps video. Amazing pixels by the way.
I was doing my first character for 5 days and i didn`t know what the hell was wrong :) Thanks to you I don`t have to start all over again :D THANK YOU!!!
thanks! All hail the new saint of awesome sauce and canned mushrooms
Thanks for this! Really helpful
Damn, you saved me from going bald.
thanks! was sculpting without symmetric bc of this
M*** F** zbrush !!! Thanks man vary helpful !!!
You ARE a saint! Thanks!
You just saving my hours Sir !!
Thanks mate, Life saver
thank you just what I needed
Thanks a lot, I was having this issues forever, it also solved my X symmetry offset problem :)
@makeuploveculture I'm not sure whats turned on or off at this point haha. Thank You for your reply though!! I think my boyfreidn finally figured it out. But it's another story if i figure it out when hes not here lol
you are a god for this
BLESS YOU
Amazing, u're a life saver!
Haha, I always forget how to do this so I've watched this a couple of times now.
Great video!
bad quality, but extremly helpful advice :)
You saved my night, buddy!
The transpose tool is both a blessing and a curse ... but mostly a curse.
thank you so much! thumbs up for you dude!
THANKYOU mushrooms!!
thanks alot for showing us this :)
The resolution comes from a period when computers were steam driven
Thank you brother
unfortunately i can't see where your're clicking because of the low res, very low res video
when I had 56 kBps Internet connection back in 80s
thank you very much!!!!! I appreciate..
sooooo useful, ty
(9 years later) Still good stuff, Man. Thank you! =]
It's been 15 now
THANKS A LOT!!
I am loving how informative this is. I just wish the resolution was better. I can't see where you are clicking :C
That's really helpful, thank you.
Thank you :O Had no idea that option even existed. 13 year old video...daaamm
thanks for sharing! great tips! I was wondering, if I were to use an insert mesh on one side and then want the same topology to appear on the other symetry side what is the best approach?
I cannot get my Z Brush 4R2 to get it's symmetry on the X axis right. It's like diagonal rather than being straight across from each other. I've tried literally everything....nothing is working????? Please help me...I'm getting so frustrated and discouraged.
But what if you MOVE the object and want that object to stay in that position and want the symmetry to follow? God its hard asking you this trying to type. Because when I try this method your explaining, when I move my object, then use your fix, my object moves back to its original position, but I don't want my object back in that position ......
you have 2 hide the other subtools , watch this
vimeo.com/53020093
Russia - say very BIG THANKS!!!!
Thank you!
nice video but requires some experience in zbrush cause the video is pixelated by the resolution is too low, but it is useful
Thanks a lot.
hi ı got a question : when ı use the symetry that brushes doesnt work simultaniously . I mean there is a different pressure both of them . how can ı solve this ?
..where did you go to fix preview?
...the quality is too low for me to see what menu you went to.
And if you have several subtools, please?
1:44, what does "here" means? I cannot guess what you mean. Where did you reset the pivot point? I am trying to resym, but I can't
damn symmetric problem thanks a lot
you just saved me from re-unwrapping my model xD
nice, thanks!
Thanks man!!!
@makeuploveculture is local symmetry turned on? Not sure if that is you issue but I think 4r2 has it turned off as default.
under --> transform menu...
Thanks!
yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees thanks maaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaan
Helpful tutorial, but man that resolution is so crappy, it hurt my eyes.
OH GOD!! thank you!!!
mine has done the same did you ever figure out how to fix it because i have only just started using this and im already stuck ..
if you could help me ill be very grateful
thanks
super thanks, i keep having symmetry issues when i import .obj files from other programs.
Hm, strange. I import an obj file, but no matter what I do, the symmetry is way off? Do you have an tut on that issue, or is the answer simple?
"go over here"
see nothing but pixels
0:12 how did you snap the tool perfectly horizontal?
in my new project doesnt work,u have the answer or not
UGH the video is so low res I cannot figure out what menu thats under. :(
Thank you so much! Great explanations too =)
Thank you :)
Love you
Would be nice to see what your clicking on. its so blury
I have a problem, if anyone can help please respond. My mesh is way too big in the preview window so I clicked unify and it turned out great in preview and symmetry is working again but it came out very small, which is okay but then my eyes were too big so I unfied them as well and they shrank too but not enough because they are just about big as the head. Is there a way to unify more sub tools at once or a way too unify properly because I would have to rescale, reposition eyes, hands, head.
i cant activate symetry using globe. pls response
Oh thank you so much, God bless you!! :)
who's from 2018??
I'm from 2020, sorry see you in a while. ;)
thank youu :))
240p long time no see!
are you from 1998? (nice voice recording though)
Video quality please...
dude i cant see what youre clicking on