Stihl ms362 Standard vs. Husqvarna 562xp "Cookie-N"
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2019
- So seen here still testing the 362 and 562 post operation to see how the procedures took.
This test-drive is in a perpendicular stance to the bole. In the previous comparison the attitude was ripping, where the 362 struggled with the chip management but had a little worse go of it in the knot section. Power is still great though.
The 362 had two good knot runs where the 562 had one equal and one slightly less as mentioned in the video dialog.
State of tune for the 362 is the Psy-Ko zippkit. That kit is 5th on the list in the different levels of work done. The 562 is sporting the Insane-O SS kit which is 4th. The 362 is ~ 1cc less in displacement for 59.0cc, rated at 4.69hp and tipping the scales @ 12.3lbs. The 562 has 59.8cc, rated at 4.7hp and weighing in @ 13.4lbs. All these numbers are per the manufacturer's printed literature.
Both saws are sporting combustion chamber work and the flow tricks also.
Honorable mention; the stock HD2 air filter on the 362 was replaced with a much better performing K & N so it also has the advantage there.
I "Got Flow"-ed the 562 so it was somewhat equal air volume wise.
Times runs were pretty close as far as I could tell.
I'm currently available for custom saw modifications. If you are interested, please shoot me an email.
danger_cat@rocketmail.com
Thanks for watching. - บันเทิง
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
Pretty close! Seems like good saws ! I would own either one! Well , I do own a 562! Love it!
2:53 Is the beginning of the STIHL and 7:20 is the beginning of the Husqvarna
Jack , I'm a Husky fan ! But that was very close! Either one I would use in the woods! Thanks Jack !
Good stuff, keep up the good work and never stop.
Excited to have you do my 362 eventually. Fun to watch a master at his craft.
Very good 362 and 562
God bless. Good video thank you
Unofficially, I got about 18 seconds with the 362 and 16 seconds with the 562. I'd own either one.
Thanks for the video love these but I have to think the stihl sounded more healthier to me
I'm a happy homeowner and have ms362 I've actually emailed you about it and you actually talked me out of sending it to you. I don't know if someone had it apart before I got it but it will spin 17k and pulls harder than that one, maybe i should just let it be. Happy sawing!
Sorry, cannot say I remember that conversation. I get a lot of contacts, ranging from bar oil to wedges. What was your name again?
@@hotsaws101Jack Klages. Been a year or so, had a sideways cutting issue but I'm left handed and my arborist buddy straightened me out. My ms362 is more than enough for me. It will pull a 25 inch bar all day and ask for more. I like your honesty telling me I don't need more.
Copy, remember now.
I like the KISS methodology and the "if it ain't broke don't fix it" philosophy.
One thing though, unless a guy has both/all saws right there, exeriencing the same atmospheric conditions while running the same bar and chain it is purdy hard to tell "who's is badder". Thanks for watching.
love all your videos I have both saws I am a stihl man the Husqvarna is a decent saw but I still like the layout of stihl great work no the less
I like both brands, I think the sthil is not as balanced as the Husqvarna. The Husqvarna is better balanced. The 362 is front heavy imo!
Looking to replace a much loved, 25 yr old Husky 55. I'm leaning to the 562xp based on history. I want more power than my 55 has, but not much more weight?
Padraic hi.
I'm not sure about your 55's weight. Seen where they are 11.4 pounds. The 562s come in at 13.3.
HP differential is 3.4 vs 4.7 as far as I know.
In the end, a lot of difference in weight but the hp advantage of the 562 is huge.
The Stihl ms362s are in the middle at 12.3 pounds. Even though their hp rating is 4.69/7 (depending upon where you look) they, like most of the new Stihl chainsaws, are lacking in lowend power imho. Currently, the company seems to going for the rpms rather than torque.
The Echos are a non smog saw and weight about the same as the 562. They have good lowend power also.
The 6100 Makita is around 13.2 pounds with 4 6 hp. It's a smog saw but uses a different delivery method of introducing the raw air. I think it works, coupled with other design characteristics, better than what is seen in the Husky & Stihl saws - which are almost identical.
You can get a wrap handle in all as far as I know.
Thanks for watching.
Are the 572 and 562 transfer ports interchangeable?
Brent hi.
If your talking about the bolt on covers, no.
Thanks for watching.
👍👍👍👍😉😉😉😉😉gotta love them psy-ko 362’s
Does the ms362 standard have a regular carb on it or is it electronic?
Ryan hi. Regular. No way to run the solenoid on the non
m-tronic version. Thanks for watching.
F*******ck the electronic it kicks my ass I was told by someone has many people to back them told me that I need the dealer to tune my carb .....I dunno how true that is I will say the 362 when running right is a good saw I was wondering myself are you able to switch back to regular carb?
Sweet,
I would like to buy a 60 what do you recommend Husqvarna 562 ? 560 ?
Andrea hi.
The 560 is the European version of a 562 - what is available in North American.
Many factors to consider:
Dealer support locally.
Which dealer you want to spend your hard earned dollars with.
The bar mount that is currently in the collection.
Whether or not there are saws with similar part in the collection already.
Saw mass may be a consideration. The 562 is arguably at the top of the heap "powa" wise but also at the top of the heap weight wise.
Cost might be a selling, "buying", point.
If the saw will remain stock or whether the owner intends to zipp it.
If end result top tier HP after a saw shop makeover is important then a couple of the current choices are better.
Ergonomics. They all "handle" a little bit differently in your meathooks.
Visual. Some like the look of certain color schemes better than others.
For the 1st time or random buyer - I'd "fondle" a few and ask to use one of my chains in a demo operation to get a feel for both maneuverability & power.
Thanks for watching.
I love your videos. I learn a lot from them. You are the only one that does comparing saws by cutting correctly. But if I have to watch you change one more damn bar and change I'm going to start bitching. No I'm kidding. But video.editor would for sure get you more views haha
Nice! !!😆
Do you have a video of a fully modded 562? I bet that really shits and gets!
Mike - Fully modded? There are a lot of definitions for fully modded out there I imagine. And some of it would depend on with whom you are conversing.... Thanks for watching.
hotsaws101
I was wondering about your mods, you seem to have several different stages. I was curious to see what your most extreme was. Nice videos
It´s better .325 pitch tha 3/8 pitch for a long bar?? i am think to change the original bar in 20 inch for a 28 inch bar in my Husqvarna 562
Victor hi. For the average guy, 3/8s. But long to you might not be long to another.
Chip size will play a role in how the oiler handles the longer chains.
Better be pushing chips and not dust on a "long bar".
Thanks for watching.
Every time I watch a hotsaws video I say "Holy crap" them saws are fast!
👍👍👍✌️
What is the long guide and what is the chain in stihl
Hubert hi.
I explain the bar & chain in this session starting near the 1:40 mark.
Thanks for watching.
What brand of bar is that?
Davis hi. Oregon. Thanks for watching.
HUSQVARNA!!!!!!!!! Good vídeo and stuff! Keep going!
Id say its prett damn close around 18s btween both saws that was a close one
Huskys 60cc saws always impress me...I run a 262xp with a 20" bar and makes the best all arounder around....lol
Makita 6100
362- 15.42
562-15.65
Both second runs.
362 does not keep up with 2260/560/562xp
Dolmar 6100 w carb set to factory specs may beat them all. And yes I have one.
But 362 shud have ran 20 in on all.
Husky killed it with 12-13 seconds a cut & the 362 was 13-15 seconds cut
Looking at miss Daisy
Mmmm, doooughnuts. From a tree? Lol.
I cudda swore that the centers were falling out of the slices. Oh well....
@@hotsaws101 ,too funny. Maybe if you did four or five plunge cuts out of the center? : )
Bunk test
24 or 28 inch guide bar??
Victor hi.
At the 1:47 mark I started talking about the bar.
It's a 30", .375 pitch bar & chain combination.
Thanks for watching.
@@hotsaws101 Hi hotsaws101. Thanks for your reply. Ya, it´s true, now i listen it, but before to send you the question i did not listen it, only saw the video. Thanks again for your reply. And is not to heavy 30 inch for this machine??. .375 pitch?? may be you would like to sed .325 pitch?? i have one 562 withe 20 inch bar and 3/8 pitch, may be 30 inch with 3/8 pitch will be a very heavy conbination for my chain saw, no??
Why's that 360 cut so much better then the 390?
grin and bear it - 362 is in the pro line as the 391/2 is in a farm ranch line. It’s not as powerful. The pro line is just fine tuned better.
I traded a new 390 for an old 262 with no coil or bar.
They didn't give a price break on that thing. I expected allot more. The old homlite xl12 would run circles around this thing.
@@grin64 i know the 392 go for around high 4 low 500. somewhere around there. my 362c-m with the electric carb was at $750 with the longer 25" bar and at a bit of a discount than msrp.
@@FishFind3000 is the 362 a powerful saw?
Looks like the Husqvarna beats out the Stihl
Both saws cut pretty good and it was a close battle. The Stihl took 5 pulls to start but the Husqavarna took only 2 pulls. So Husqy for the win.
Here we cut White Oak & Red Oak. Try your race with the 38" bar & chain on that.
Dave hi. Please check the pinned comment in this video -
th-cam.com/video/--LZBj7ipB4/w-d-xo.html
I can build saws that can handle your oaks.
Thanks for watching.
@@hotsaws101 If I were much younger & had more time left I would send you a 44 magnum to work your magic on.
Keep the faith Bro.
I'm a Stihl guy, but the husky was a second faster by my count and sounds better. To each their own, but I believe the husky 562 is superior to the 362 in all research.
Should have own chain and bar
562 was faster
I love a husky but live in the Sandhills of the south east. No husky support here these guys are all still here and I hate it
Every time I watch a hotsaws video I say "Holy crap" them saws are fast!