I hope the cylinder was cottered and honed prior to assembly. It had a deep groove! This is not a restoration; it is a mere reincarnation! Good job! Gerard, the Netherlands
The piston was brand new, so the cylinder was most probably bored. And he used a brand new ignition plate too. (Despite cleaning the old one, but it would never have worked anyway.)
i love your stuff, i know garages that have ten times more professional tools but they are doing ten times worser jobs than you are, thankful that you put your work on videos, thanks dude!!
I can't believe how that engine looked! spectacular, to think that I have an equal engine lying in the back of my yard thanks to your video I'm going to restore it ... greetings from Bahía Blanca, Argentina.
The Honda mopeds with these engines were so plentiful in Malaysia. Mostly the C70 GBO and C70 GBO-J. I have seen some guys polished the magneto and clutch cover into deep mirror shine and some motorcycle spareparts even sell the chromed ones. It look really nice. Most parts were locally made and some came from Thailand. These engines have a good reputation of being so reliable and bullet proof!
Nice project and great to see one of these engines running again. Tip: Using a wire brush to the clean/polish aluminium is a REALLY bad idea. Tiny steel particles from the wire will embed themselves into the aluminium and cause corrosion. Use a synthetic wheel such as 3M scour pad (Scotch-Brite) . Much more friendly to aluminium.
What an amazing restoration job, you are obviously very familiar with this style of engine, I don't have much experience with the semiautomatic motorcycle transmissions, I find them complicated compared to regular manual clutch setup. Great job on an engine that looked hopeless, now it like new again.
Отдирание головки от цилиндра отвертками, установка цилиндра с такой царапиной на весь ход поршня, непритертые клапана, выдирание пальца плоскогубцами, установка фигурной втулки без масляной пленки, накидывание крышки с сальником кикстартера таким неаккуратным способом, сборка после обработки наждаком с микроабразивом... простите, а вы тоже такой механик и чините на уровне ребенка из какого-нибудь Бангладеша?
Nice video!! I have the same motor new in a crate in my garage. I use to work for a Honda dealer as a mechanic and when the owner sold the shop he gave me the motor that he had in stock. That was over 40 years ago and that how long I have it for. Your video make me want to open the crate to look at it.
I have a 2007 CRF70 engine that looks identical to this engine, I’m doing the same basic freshen up but replacing the top end with a 88 kit, free HP. The Chinese copied these engines then even created a different version using a Kawasaki based top end (YX140/YX160 and so on) but for me it’s the original short stroke Honda. Nice work
i liked that but only a young man could do most of the work bending over on the ground.. my back would have gone by the time i got to the conrod.. good video..
I had one 50 years ago. Sold it for 50$ to buy a ratty car. I still kick me in the butt ! It would be perfect for running errand in my suburb now... Dumb me.
*He's in Viet-Nam, likely Saigon* ( 50 and 90cc 'Cubs' are enormously popular there...because they use them for everything/anything and they're very rugged & easy to work on)
where are you from?
I am from Argentina... Instagram @1v4n.v3r0
do you have Instagram?
Es españa
Greece!
República del Paraguay
I hope the cylinder was cottered and honed prior to assembly. It had a deep groove! This is not a restoration; it is a mere reincarnation! Good job! Gerard, the Netherlands
The piston was brand new, so the cylinder was most probably bored. And he used a brand new ignition plate too. (Despite cleaning the old one, but it would never have worked anyway.)
Кто нибудь из русских смотрит такие видео?
Привет с Омска)
Я=)
Кнш
да)
ну да, интересно же
i love your stuff, i know garages that have ten times more professional tools but they are doing ten times worser jobs than you are, thankful that you put your work on videos, thanks dude!!
thank so much 👍👍👍
I'm watching from Japan. I'm impressed with your technology
I can't believe how that engine looked! spectacular, to think that I have an equal engine lying in the back of my yard thanks to your video I'm going to restore it ... greetings from Bahía Blanca, Argentina.
Sell the engine to me.
thank bro
Good job bro you're a genius! 👍👍
Great job !
The Honda mopeds with these engines were so plentiful in Malaysia. Mostly the C70 GBO and C70 GBO-J. I have seen some guys polished the magneto and clutch cover into deep mirror shine and some motorcycle spareparts even sell the chromed ones. It look really nice. Most parts were locally made and some came from Thailand. These engines have a good reputation of being so reliable and bullet proof!
thank bro for sharing
The Honda Cub is the world's most sold vehicle of any kind. Way more than 100 million produced from 1958 and up until today.
Very good job!👍👍👍
thank👍👍👍
Nice work.Very enjoyable to watch.
Уважения достоин. Лайк.подписка.респект.
Оххх пиз....шь эти моторы щаз стоят на всей китайской технике и даже прокладки зелёные
Потому что Китайцы спиздили этот мотор,как раз у Хонды
китайцы просто щас делают так то это хондовский мотор
Это знаменитый хондовский мотор, клонирован китайцами
@@amanmambet7568 на альфы ставят
У меня на Пит байке стоит такой же 125 кубов
Hello my friend..nice work.. But I think it's better to paint the engine with heat paint to protect the metal!
Nice project and great to see one of these engines running again. Tip: Using a wire brush to the clean/polish aluminium is a REALLY bad idea. Tiny steel particles from the wire will embed themselves into the aluminium and cause corrosion. Use a synthetic wheel such as 3M scour pad (Scotch-Brite) . Much more friendly to aluminium.
thanks
What an amazing restoration job, you are obviously very familiar with this style of engine, I don't have much experience with the semiautomatic motorcycle transmissions, I find them complicated compared to regular manual clutch setup. Great job on an engine that looked hopeless, now it like new again.
Except for the centrifugal clutch, there's really no difference.
Wow!Amazing job,you're a very good mechanic!
Good job bro. 🔥 🔥 🔥
Clever buggers, im very impressed, well done. Good Luck.
Essex UK
Best thing about Honda is there parts department. Doesn’t matter what year you have, they got the part your gonna need.
In Brazil we say that you can find Honda parts even in a bakery😂
Unless it's an '88 Shadow 1100.
Нет слов. Это шикарно, говорю сам как Мото механик со стажем
Только вот перед разборкой правильно было бы помыть всё снаружи, смыть всю грязь и оставшийся песок, а не только счистить глину :)
Отдирание головки от цилиндра отвертками, установка цилиндра с такой царапиной на весь ход поршня, непритертые клапана, выдирание пальца плоскогубцами, установка фигурной втулки без масляной пленки, накидывание крышки с сальником кикстартера таким неаккуратным способом, сборка после обработки наждаком с микроабразивом... простите, а вы тоже такой механик и чините на уровне ребенка из какого-нибудь Бангладеша?
Про Димексид не слышал автор.
Greetings Finland :Christmas Santa Claus👍
thank bro
Nice video!! I have the same motor new in a crate in my garage. I use to work for a Honda dealer as a mechanic and when the owner sold the shop he gave me the motor that he had in stock. That was over 40 years ago and that how long I have it for. Your video make me want to open the crate to look at it.
Sei un Grande Complimenti
すげぇ、見違えるほど綺麗になったし本当にエンジンがかかるとは思っていなかった。
An artist !!
Another great job! Well done my Brother from another Mother. Whoever gets that bike will be fortunate!
I had a mustard honda 50, ran great never a problem
Nhìn đôi dép là biết người VN :v em đã sub ủng hộ anh !
Un trabajo expectacular!! Impresionante el gran resultado de la restauración.
Honda, das original motor❤
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Thanks for filming
i like the wire wheeling the aluminum case . looks nice
Keren banget gan
You should start restoring whole dirt bikes and make them look brand new
Awesome skills my freind !
Always a pleasure to watch you work you make it look so easy :-)
Nice Job!! Great video.
You are truly skilled and doing a great job. 👏👏👏💪
Very good job!! Bravo!!
Nice video 😍
Thanks for your feedback. I hope you will support us in the next video
A pleasure to watch 😁👍
I have a 2007 CRF70 engine that looks identical to this engine, I’m doing the same basic freshen up but replacing the top end with a 88 kit, free HP.
The Chinese copied these engines then even created a different version using a Kawasaki based top end (YX140/YX160 and so on) but for me it’s the original short stroke Honda.
Nice work
😍 like 👍
Great job, thank you.
This is the same engine as mine so i know how to fix it now :)
Muy bueno, ya tenés motor para dar la vuelta al mundo. 👍
Feliz año 😃😃
Well done bringing it back to life.
Que belleza de vídeo!!! 👏👏👏👏
this is just too satisfying to watch.
Skilled hands and quick mind.
i love this channel and the music
Fantastic video. I could have used this 25 years ago when I had a Honda CD-50 :-)
i liked that but only a young man could do most of the work bending over on the ground.. my back would have gone by the time i got to the conrod.. good video..
Berry nice de-deng-deng you make
Nice job. I already forgot what part goes where!!🤣
After this motorcycle.....try to restoring Modenas Kriss 110...it pretty nice
thank bro 👍👍👍
Движок от альфочки)))
Ето хонда
you need a clear plastic shield for the wire brush, crazy
Awesome, what was used to remove the oxidation? it worked so fast!
I was wondering the same thing. I would like to know. Caustic soda maybe?
Uses RTV
Puts a gasket on top
**Confused flip flop noises**
*wow very good 👌*
thank you🙂🙂🙂
The begining background music sounded like "fire on the mountain" by the marshall tucker band
sinformant idk where u hear that lol
@@justinneal5699 sorry I meant to specify. The begining did
sinformant ohh I see now it does
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Phục chế máy Dream II đi ad ơi!
My God that’s some nasty oil! But it protected the innards of that engine. Wow!👍🏻👍🏻👍🏻
Beautiful
Crunchie lives to see another day
Guaaaauuuu Felicidades
Please...
No background music....
Otherwise great video
thank for sharing
learn how to use your volume control
Great job, mate. Can't wait to see the whole thing come together. 👍
Great job man. Have a beautiful Christmas. What is that substance that you are using to remove the Aluminium corrosion?
thank you so much
Very nice video,in video, i see scooter there, please the next video, would you restore scooter
thank bro
May you Please use gloves ( for your safety )
And remove the background music let us hear some satisfying sounds 😌
Who uses gloves you gay or something
That engine looks identical to all the chinese dirt bike engines.
Chinese copies the honda engine same way predator engine from harbour freight is honda clone
This is real honda one! Any 50-160cc is copied out of real honda one
Hmm, a very unusual valve spring compressor!
Surprisingly, it seemed to work during assembly too.... :)
**Chinese fmb 139: You know i'm something of a Honda myself**
to samo miałem pisać... :D
Это хондовский двигатель, китайцы его копировали
Класс! Движок похож на китайский fmi 154))
impressive only wish you would have polish the covers more to make it nicer
kênh này của người VIệt Nam nè :VV
Клас ,все красиво,
Well done it looks so good, but for god sake use some gloves
Very nicely done! Congrats. Just a question... what liquid did you use to remove oxidation(grey stains) from aluminum (engine covers)? Thanks.
My dream bike the super cub c50 I was gonna buy one as a restoration project for really cheap but it was too far away
I had one 50 years ago. Sold it for 50$ to buy a ratty car. I still kick me in the butt !
It would be perfect for running errand in my suburb now... Dumb me.
Marc René Yvon mannn I bet that’s one of your biggest regrets lol
Maestro....!!!
Русский коммент 31.12.19 с наступающем!
@ТЕХНО БЕСПРЕДЕЛ лишь бы доебаться,жить скучно?!
I noticed the kick start boss had broke out of the main case and had been welded back in place. Look close, you'll see the weld.
How do you k now where everything goes. AHH such talent!
Bad ass dude
Hebaaaat
the honda engine very good and i had honda ex5 and i made raceing spec
Nice work friend, truly. I have to say though wear some gloves!
Владельцы альфы поймут :)
Vietnam like
Класс🖒🖒🖒
And it’s done right.
Great job as always, I'm not sure why every one is fussing about the sound, there's no dialog and if you don't like the music, mute it
but this music is just obnoxious
People want to hear the sounds from the tools and engine
I WISH I COULD BE AS SMART AS YOU
*He's in Viet-Nam, likely Saigon* ( 50 and 90cc 'Cubs' are enormously popular there...because they use them for everything/anything and they're very rugged & easy to work on)
Tay nghề cao đấy