After many months spent following watchmaking channels, only today did the TH-cam algorithm offer me this channel! However, in my modest experience as a watchmaking enthusiast, this is the most educational and practical channel and closest to attending a watchmaking school (which, in fact, it is..). Thank you very much.
I spent two weeks in engraving School struggling with working distance. Why in the hell did somebody not tell me this? I use a couple of antique Bausch & Lomb stereo Zoom scopes which I can highly recommend- even more so now that I have acquired .5X Barlow objectives for them holy cow is this amazing. Thank you for this game changing piece of information. I spent more on my engraving classes then my first two cars and nobody bothered to let me know I could improve my working distance I had to see it from a guy on a TH-cam video.
I did the exact same thing a couple off months back. And yes, the .5x Barlow was a great investment for my old B&L Stereozoom. That said, one does have to be patient to find that lens at a decent price. Cheers.
I'm surprised that Alex doesn't use a stereo microscope, since the ability to sense distance in the view is a huge plus when working with small components...the 0,5x Barlow lens i had not thought about, probably because the microscopes that we used at work (surface mounted electronic components) had low enough magnification, and enough stand-off distance... great that you guys invested in stereo microscopes!
@@raemelloh I have three total and they are all stereo Zoom 5. I have not made more than 30 for any of them. A little cleaning and they are like new. The critical issue is the .5x diopter. Those are much more difficult to find
Mr Hamilton when you said the amscope was a game changer you werent kidding... i am still learning how to service a movement but this thing makes the process 1000 times easier.... now if i could just fight my jumpiness lol
What I love about Alex’s video.. he addressed most of the other microscope reviewers avoid talking about. ‘Working distance’ - this is so critical if a hobby watch maker is going to use it for oiling cap jewels etc. that’s primarily the reason I want to get it. To be able to see better on what I am working on with two eyes..
Just fyi. Initial magnification is .7 x10, so 7 times. The zoom is depending on model 4.5 or 4.7 or other, so 4.5x10 = 45 total magnification. You can verify by looking at a ruler. Lowest power will show 35mm to 45mm, at full zoom it will show 2.5 to 2mm in the eyepiece. Hope that helps.
I would say that the important thing is that it's a stereo-microscope. The zoom capability is a valuable addition, but the most important is that you get a stereoscopic view. (3D-view for lack of a better term.) The left and right eye are looking from slightly different angle. That way you're able to accurately judge distance.
Just when I thought it couldn’t get better, Alex reaches a new high. Adding a binocular microscope to my bench was an absolute game changer. I could finally see clearly when trying to coax a hairspring back between the regulator pins, inspecting the gloss surface of a cap jewel, and other routine (and not so routine) tasks. Mine is optically superb, but the working distance is too small to be able to use a screwdriver. But maybe a Barlow lens would help with that, I’ve now learned. The specific info on microscope and cameras setups will help a lot of watchmakers who look at Zeus’s dissecting scopes and faint when they see a $10k price tag! This is the best watch repair channel on TH-cam, for aspiring watch repair techs who need to know what they need to know. Bravo!
Hello again my friend, Absolutely a game changer. I had been using a stool for my microscope bench but just recently changed it so that I could use the same chair and just flip around to my height bench. That has made a noticeable difference in my work flow. Hopefully you can get a Barlow for your microscope because once you get accustomed to it, working becomes much more relaxing. Thanks Paul Alex
I bought one of these microscopes from Cousins here in the UK and indeed it's a game changer. Moreover, you Alex are a Life changer, with you clear eloquent and informative videos which have totally rekindled my love of repairing vintage watches. I look forward to your next one, Thank you.
I want to thank all my Patreon supporters and subscribers that have made donations to the channel to help in my journey to bring the type of information left out from other watch channels. Thank you to all. Steve Stroschein Christopher J Vincent Vincent Tiger Mike Maltese John Boyarsky Paul Schumacker Ray Everett bill doog Joe Chambers Marcel Gustafson James Pelletier
Great video as always. Good delivery and thorough coverage of the topic of microscopes. I bought this exact microscope when I got into engraving and was very happy when you endorsed it for working on watches.
@@rakhlin there are higher end scopes available but with all things considered, this setup offers a lot of bang for the buck and really makes the work a lot more enjoyable.
Alex, you're great!. I took your advice and got my watch running😁😁⌚⌚ In a fair world, there should be at least 4 more zeroes on that subscriber number of yours.
Thanks for the info my dude! Always a blast learning from someone whos clearly knowledgeable and doesn't feel the need to pack a bunch of BS filler into their content. Straight forward and breviloquent that's you man.
Your classes have been terrific. I'm getting ready to re-watch them as I know I'll learn things that I missed on the first viewing. Thanks for all your efforts.
I purchased the microscope, Barlow lens, and light ring, using the links you provided. Thanks for making it easy. I'm pretty sure I'll buy the camera soon for recording disassembly. I've serviced 5 movements now with great results. I find myself doing everything under the microscope. Almost feels like cheating. Thanks for the help!
That’s awesome to hear. It doesn’t take long to get accustomed to it and it makes everything so much more accurate and you can really see if there is any dirt left behind.
Alex. Thank you. I've followed you since your first video. I think I found it within a couple of hours of inception. I'm now able to disassemble, clean, assemble and get a watch running. Always poor amplitude, but it's a great feeling. I view your new videos eagerly, and once a week review all the others in order. I'm an anorak (nerd), but I have learned so much. Each time I view I find something that refreshes the learning. I am at the stage where to continue with you feels that I have my own personal mentor. Your comments of the later stage of the video sounds absolutely fabulous. Thank you Ross
Ross, It’s comments like this that really make all the work worthwhile. From the start, I wanted someone, who had never looked at a watch movement before, to be able to follow the videos and complete a successful watch service. I knew, that for many people who view watch related videos, they would find them somewhat below their level of experience and that these videos I was making would never really be successful by TH-cam standards. What I did know, was that for the ones with zero experience these videos potentially could be the difference between starting off with great enthusiasm for Horology and then quitting in frustration because they just can’t figure it out. Thank you for validating what I am doing. Alex
If that is the only problem, time to go garage-sailing for a new table, or a sheet of wood and a couple of clamps. My problem is lack of green, and no desire to use my excellent credit card balances to purchase all this fine stuff.
Look into the Amscope SM1TZ. The base is only 1.2 cm high and a Bergeon 7808 mat covers it almost perfectly. The base becomes your work mat. Same microscope head as Alex's I think. Includes the 0.5 Barlow.
Your closing on this video was reassuring. Being retired and physically impaired, i am excited that i will have enjoyable and knowledgable instruction for some length of time. Looking forward to it!
Hi Alex, Again an other informative video from you Each of your 18 videos has taught me so much and again gave me the confidence to actually start disembling watches, obviously making mistakes, but fortunately learning from then and growing in confidence,. Look forward to more of your watch knowledge my friend,.
@@watchrepairtutorials You are very welcome Alex, You just don't know the confidence you instill in people like myself, with your down to earth simple explanations of watches and how they work and how to work on them. You're a great auritor and as l said l've learnt more from you in your 18 videos, than l've learnt in a year, watching other channels,.
Our AmScope at work has soft rubber eyepiece caps that extend a hollow cylinder for about 0.5". It's not usable with glasses on but when you lightly touch your eye sockets to the rubber you have the best view.
Ok, I've watched the series and ordered a few basics, including a practice movement. I think I'm ready to go back and try and some hands-on. Thanks again!! Def need a microscope if I'm gonna do this much at all, but can't really afford that right now. Got a couple dumont tweezers, a couple sizes of single burgeon screwdrivers, and some other supplies - chinese movement holder set that def needs sanding, chinese spring pin tool, nail tees, a silicone mat (meant for phones, but I think it'll do for starting), loupes, and some little containers for parts. Here I go... thanks again, professor! 🙏
So many advantages to using a binoculair microscope! I've heard some hardliners on the watch forums opine that since a loupe was good enough for the old masters, it should be good enough for the rest of the world.... It's just pedantic gatekeeping! By far the best investment I've made in terms of equipment.
Believe me Sven, if they had access to the microscopes we have today and timegraphers they would have used them. They also used whale blubber as a lubricant, cleaned parts in benzene and dried parts in saw dust.
Hi Alex. After a year of frustration and contemplating giving up because l couldn't see what l was working. I have all the tools l need now, tweesers, screwdrivers etc etc. I finally saved up enough money to buy the exact same amscope that you have with the barlow lens for £450. I cant wait to get back into this hobby and wondering where my passion went. Thanks again for your input and my reserection to something l thought.l had lost Alex
@watchrepairtutorials Hi Alex, all set up and Wow !!!! I can see properly, My first point is just how disappointed l am about the condition of my bergeon screwdrivers. Once l saw them under the microscope. I have now disassembled a bulova art deco, cleaned and oiled it, only to find out that my setting lever was broken, and l'm just waiting for a replacement. Also l learned the value of having a good pair of tweezers and not losing small parts, it is a journey of learning. Once again, l thank you, Alex, for your inspiration and your knowledge that l have learned so much from. My next steps are to save up and purchase mainspring winders and a few other items and continue to enjoy that feeling of taking something that is broken and bringing it back to life, l'm stearing more into vintage watches, as like an archaeologist vintage watches have a history and a story to tell from the people who wore them and the love they had for their cherished watch. I have, at the moment, 8/9 vintage watches waiting to be serviced, including 3 Omegas, Oris, Mondaine, Montine of Switzerland, Paketa, a Perona, a Gruen and a Glashutte. Enough to keep me occupied for a wee while and all really down to you, Alex, and covid when watching YTube and seeing one of your videos, l said to myself ( l can do that 🤣 ) Aye Alex Thanks !!!
Thanks for you commitment and quality of expression Alex. You are a skilled craftsman who shares, not withholds, and who uses a major amount to time to benefit others, even for people like me who will probably never take apart a movement but who enjoys craftsmanship.
Thank you for the video. Yes I have been debating purchasing a microscope. As I have aged I have begun using readers to see up close and I hate switching between loupe and cheaters.
Well John like I said I think it really changes everything and how you work as well as the quality and precision that you can do the work. As a person who wears glasses I find it much more comfortable looking through the microscope then full in with loops.
For me i just got myself a hi res digital microscope last month. it already has already become invaluable. I can do some work under it, but i love it for inspection and fault finding. its been a game changer!
I knew you were a microscope type of guy ! 😂 I bought mine back in May ( Amscope SM-4TZ-B ) and I can’t see working with anything else unless like you said replacing a jewel, fitting hands etc etc. where you need to use a jig which precludes microscope use. Ive been buying tools since January of this year and I’m 90% done. I can say I’ve spent a boatload of wampum but I just can’t see working with anything less. Glad you came up in my Home Screen and doubly glad I’ve subscribed. I’m one step away from Patreon and it will be my honor to do so. Again much thanx and look forward to your next vid. 🍻Cheers Alex !
@@watchrepairtutorials I’m born and bred and still in New York City. Ditto on the older eyes , I’ve passed the double nickels and I’m workin on the big 6 0 so I’d have to agree with ya there.
@@watchrepairtutorials 73 myself and still ticking. The scope is a necessity. I am retired and I find watchmaking a great pastime and it keeps the mind sharp as a balance staff. It has taught me patience and keeps me in-beat. Also reading everything that I can get my hands-on is also a big plus for the learning curve.
After watching this video and also previously purchasing a digital microscope. I decided to pull the trigger on this entire setup. It was expensive but after using it for a few days, I don’t regret one penny. What an amazing tool. Thanks for your content.
@@watchrepairtutorials That’s an understatement. Absolutely a game changer. I’m a 49 year old crane operator and not used to dealing with things this small. I tried working under the digital microscope and nope. Used the other normal stuff and still have a hard time. The first time I used the stereo microscope, with the ring light.. I was like “you have to be kidding me.” Absolutely the best money I have spent on this.
@@jeremyhippenstiel4637 Well that’s awesome to hear. Crane operator? That’s gotta be pretty cool. Send me a picture from up there some time. I would love to see it. Alex
This one was chocked full o' gems! The microscope is just an essential part of kit IMO, and you can't do a good job without proper magnification. This is one of those subjects that people are always asking about, since microscope options can be quite confusing. I gladly joined the Patreon too -- I've used this channel as a resource so much, it's only fair to help support it in return.
Wow thank you man. Any money that the channel could generate or just go back into future videos to increase quality. Your support is much appreciated. What’s your first name?
You’re going to see watch repair in a whole different way. I remember the first time I went from a loupe to a microscope. I asked, why are we using loupes?
@@watchrepairtutorials i can't seem to get comfy with a loupe any way... i have the monocular style, a pair of loupe glasses, and that wire for the single loupes... dying to try out the new rig.... thank you for keeping us... excuse the pun... in the loupe
Done it. As you said, it's a game changer. For Christmas my bride gave me a Digital Microscope g1200 (on offer at £35). Not to the standard of yours by a long chalk, but brilliant all the same. Within a minute of switching on I found an error of my own work. A spring holding a jewel on the on the balance of my Sekonda 2428 was not actually central. It looked it, but on magnification I could see that it was off centre. So obvious! As they say in Latin. Tarrus Verius Mutchus.
Well Ross, everything becomes more clear that’s for sure. It’s just like the first time you switch on a timeGrapher and you see your work was not quite as good as you thought. But it’s all a learning process and the more you know, the more confident you get and the more enjoyable your work becomes. Merry Christmas my friend
Hi!! Thank you very much! Your videos are the best of the best! And you is really great man!!! I like this so much. Great respect from Belarus (it's the little country near Lithuania and Poland, and Russia))! See you necessaraly!!! I wish you good luck!
Alex I can’t thank you enough for this video. The amount of information and the way it and all of your videos are presented are fantastic. I am just a hobbyist and have been trying to work on watches for about a year now but kept having issues with magnification. After watching this video multiple times I did some additional research and starting watching for a scope of my own. I now have a Amscope SM-1TS-V203 and am awaiting my camera. The difference in my ability to see and focus is immense and I am able to work with much more confidence. I can’t thank you enough for this video and helping me solve my issue with magnification.
Thank you very very much for all the previous videos, each and every one of them has been (and continues to be) a priceless mine of information. And please keep them coming !
You're The Man, Alex. Thanks for taking the time to pass along all this good information and in a clear and concise manner. Looking forward to future installments of yours pertaining to actual repair. Yes, the "scope" is an integral part of my workbench. Mine consists of a hodge-podge of components, some bought and others homemade. The foundation is a Hayear 48Mp camera screwed onto a Hayear 180X Zoom lens. All this is coupled to a ismartView 10" HDMI monitor. I believe this setup is the best bang for the buck compared to those ready-made inspection digitals currently available. I have a cheap LED ring light just like yours. I took it a step further and cut a filter for it out of some polarized thick-film material (B009P8B548) in the shape of a ring to cover the light and I added a screw-on circular polarized lens (B003USTMIU) along with a ND filter (for protection) to the bottom of the camera lens. Having polarized light allows me to dial-out unwanted reflections and see detail that was previously obscured and it allows me to see into things like jewels, screw holes, hollow items, and the like. I suppose polarized light will be a matter of personal preference but I find it very useful. To rotate the polarized lens, I drilled & tapped the side of the ND filter, which is on the bottom of the polarized filter, and screwed into it a 4-40 thumb screw from an old serial data connector which is about 2" long and it makes a terrific handle. I liked it so much that I installed one on the Zoom-ring of the camera lens too. Spending less than $30 converting an ordinary LED ring-light and camera lens using readily available materials saved me hundreds over a factory-made polarized ring light. Here is a Dropbox link for a pic of my setup: " www.dropbox.com/s/vzhq5afy0m7ai1r/IMG_3448.jpeg?dl=0. " It is zoomable or you can download it and zoom in yourself. Cheers
Hey Ray, Good to hear from you. I am going to give your lens filter a shot. Reflection in shooting video is a bit of an Achilles's Heal for me. Thanks for that tip.
@@watchrepairtutorials Glad to be of some help, Alex. I wanted to leave a link to a pic in my Dropbox but....... Let me know how it went and good luck with that.
Another great educational watchmaking video Alex, the microscope is my next and hopefully last bigger investment, my wife is looking for the rolling pin. Looking forward to your next series
Easily the best microscope video on TH-cam and I've seen most. My field is electronics but I will definately be watching your back catalogue. Your descriptive style is just what I need. Thank you.
I got some dentistry loupe lenses or use a stereoscope. But the dentistry loupe lenses are my go to because I can sit in a chair and my hands are free to move. Say a hairspring is out of alignment (uh oh). I can see the thing without a screen and my wrists can stay completely vertical to the horizontal lying hairspring. I highly recommend looking into them! They’re expensive but oh they save me!
I almost bought the scope you linked to, but I'm glad I did a bit more research before I hit the "pay" button. The scope you linked to doesn't have "simultaneous view", and you have to pull a little stainless steel rod to divert the optical path of the left eye into the camera, thereby depriving you of the ability to see in stereoscopic view while using a camera. Which really sucks, I would have been sad if I spent $500+ on unsatisfactory equipment. It only costs like $50 more for the simultaneous view head. It's a pretty important detail, and you left it out. And also, the magnification of this scope without a barlow lens, with 10x eyepieces is 45x, and with a 0.5 barlow lens the max magnification is 22.5x. Regardless, I appreciate the lesson. 99% of what you said is true, and I did learn from this video, and for that I thank you.
@@watchrepairtutorials I think most people that get a "trioptic" for watch-work plan on using a camera...I mean, that is the whole point. I plan on using it to record the disassembly process, so that I have documentation on how it came apart to refer to as I put it back together. I really think we need better terminology, I think the heads that divert the left eye should be called "Semi-trioptic", and the simulview should be called "full trioptic" or something. It's much too confusing for a $500 piece of equipment.
@@watchrepairtutorials I'd at least put a note by your link in the description something like "*this model switches to a right-eye only microscope when camera is in use"
Great video. I'm a newbie in watch repair and only watched a few of your videos, but you always present clearly and make it very easy to follow. I've used plenty of microscopes for work, including optical and SEM that cost thousands and thousands of dollars. I'm surprised that a cheap microscope is all you need to make your life easier. The right tool for the right job, as they say. I'll definitely look into one for personal use. Thank you so much for sharing your insights. You are helping many watch enthusiasists out there!
Initially I used 30X loupe for inspection and oiling, then I got one of those chinese microscopes for a very reasonable price. I still have good eyes, strong magnification is not such a big necessity for me, but using it reduced a lot of fatigue, because I can now recline while doing certain tasks.
Absolutely spot on advice Alex. She Who Must be Obeyed (SWMBO) bought me an Amscope for Christmas this year and I pouted like a child until SWMBO agreed to let me start using it before Christmas Day. It's a complete game changer for me. I struggle with a loupe as I wear varifocals and the focus was constantly changing when I moved my eyes around. The microscope has allowed me to lubricate pallet fork jewels with ease, replace the pinging incabloc springs without turning to drink and lubricate the whole movement with confidence that it's getting to the right place with the right amount. Managed to pick up a clearance stereo Amscope with boom arm, .5 barlow lens and an LED ring light for £240 which I consider a bargain, given the amount I'm now saving on blood pressure medication.
That’s is so funny. I can imagine having that exact conversation with my wife. LOL When you think of all the money spent on a wide variety tools, is there anything you can think of that has made such an impact as this microscope ? Probably not.
@@watchrepairtutorials Completely agree. The other thing that shocked me is the tiny particles of hair, lint and crud that can be sitting on your tweezers or in a jewel that you wouldn't notice through a loupe.
@@thegrumpymuso5418 LOL. Ain’t that the truth. Just like the timegrapher shows you how good your service work was, that kind of magnification shows you how clean your parts are. I will look at the movement and do any spot touch ups on the jewels or find little particles in a crevasse sometimes. It’s really amazing how much more precise you can be and I’m ticked to death you can see it too.
Great content. I have a question regarding the last, less versatile scope. Can’t you replace the oculars to get the magnification you want and switch back and forth? I realize that doesn’t provide zoom, but if someone wanted to go fairly bare bones and light weight (or for just quick looks) seems like it could work.
@ Could be the case. Most I’ve seen when looking around seem to come with 10x oculars regardless of other configuration. I just remember my old refractor telescope as a kid and that was the only way to change the magnification, other than to add a barlow lens. Just wondered whether the same kind of applied re oculars on stereo microscopes. Thanks again for the great vids …
Yet again another very enlightening video, I fitted a digital camera like yours into the camera port by making a simple spacer ring, it is used to take pictures of the piece that I am working on as my memory is not as good as it used to be. I totally agree with your assessment of the advantages of a microscope.
Another great video Alex. It can take a little while for the brain to sync up to get good hand eye coordination. I got two selections of click and other springs along with a selection of screws for a total of six pounds GB. Spent a few days moving them from container to mat, turn the over and move them to another container. This worked really well with the added advantage I might have some spares when I sent springs/screws to the Swiss space program 😂
Agree 100%. As a novice, I'm only on my second practice movement (a Seiko 7S26) and have used only my microscope with it. I can't imagine working on Diafix jewels without it. I use the Amscope SM-1TZ with a 0.5 Barlow and a LED ring. It has a 1.2cm thick metal base with length and width that seem perfectly sized for a Bergeon 7808 work mat. I removed the two base clips and made a small cutout in the mat to accomodate the vertical post. The mat basically completely covers the base, whose thinness now makes it an ideal working platform. The 0.5 Barlow allows easy and comfortable use of tools. You get depth perception not possible with a loupe. Diafix cleaning and lubrication is still a PITA but it is doable and getting easier with more practice. The microscope was my first major acquisition after screwdrivers, tweezers, and oils. Should have a timegrapher by next week to further up my game.
I found assembling the train of wheels of a ST36 clone quite difficult with a loupe (even with an Ary clip on for my glasses.) The lack of depth perception is frustrating and the back and forth between loupe and glasses taxing. Having your head so close to the movement for so long is uncomfortable. Ended up taking my glasses off and using naked eyes up close. That movement is large enough to make unaided assembly of wheels possible. The incabloc chaton of the balance is another matter. You can't do something properly if you can't see exactly what you are working on and what the tweezer tips are doing. So I got the microscope. A real game changer as you said. Optics are as essential as good screwdrivers and tweezers.
I have a times 70 microscope that is priceless. Had I known earlier I would’ve got the microscope with the camera attachment, but I didn’t. I also did not know about the Barlow lens and that’s a great idea for giving you a little more freedom under the microscope. my microscope is a DSZ70 and it cost around 1000 bucks used.
Thank you Alex, I am very new to this hobby and after viewing about 10 of your videos I must now evaluate my direction. You may have saved me some pain and suffering :)
Please clarify the objective lens specs on your recommended SM-3T microscope. In your video @ 1:34 the objective lens spec is stated as 7x to 45x. The manufactures lists it as 0.7x to 4.5x (note decimal point) Thanks, I am thoroughly enjoying your videos and your ability to so clearly explain all in the intricate details and share your vast knowledge.
The way I understand it is that 0.7X - 4.5X is the magnification that the microscope head provides. You then factor in the magnification of the eyepieces to get the overall magnification. So, with 10X eyepieces, it ends up being 7X - 45X. Add in a 0.5X Barlow lens and gets halved to 3.5X - 22.5X overall.
I got me a Vevor microscope which is basically a Chinese made thing like your Amscope. Barlowe lense is included. Absolutely great, i love it. Tomorrow my micro four thirds adapter for my Panasonic camera will arrive. Looking forward for it. :) 🕐⚙️🍸
Alex thanks for video brother! I just ordered the setup... Just so everyone knows it ran me $688 US plus tax. The scope was on sale at the time I purchased.
@@chuckw4203 wow you really jumped all in. I will be interested to see how much you like working this way. One thing I did was to turn the stand in the opposite direction and then I have a bolt that goes through the base and my work top to keep the scope from tipping over. This will give you more distance between you and the base. Let me know how you like it.
@@watchrepairtutorials Yes sir I have been looking at this type of setup for sometime now, This setup is about $600 cheaper than the one I was trying to put together. I'm excited to see how it will work. My eyes aren't the best anymore . Good to know about the stand thanks for the heads up!
Just ran across your videos. Fantatic. Going to do a video dumo starting with your first. This one is a year old so I think I have a lot of viewing to do. Keep up the good work.
Hey brother, that sounds like a plan. Just let me go ahead and apologize for the quality of the first videos. I was new and didn’t really know how far this thing was gonna go. But the information is still good if you can get through the audio. The plan on remaking them as soon as I’ve got a few minutes extra.
Thank you Alex for the video. My cheapo setup needed a 0.35x barrow but it works. Who knew being able to see what you are doing makes it easier to do what you need to.
Well for about $1000 you can buy a lathe I think the technology will have to be able to print in 100’s of a mm and certain parts like pivots would still need to be finished by hand.
Excellent video. Really appreciate your helpfulness. I just ordered the microscope and each of the items you suggested by using your links. You more than deserve the fees that you earned. Again, appreciate your help!!!
Will receive the microscope in several days. Will let you know how it turns out. I bought a grab bag of 20 movements for $20 from eBay to practice and develop my fine motor skills. Already killed 1 seagull movement. Don’t want to repeat my mistakes. Looking forward to being able to really see things clearly. Take care.
Alex, got my microscope, light and camera. Did you download the software from Hayear to run the camera? The microscope is amazing. I can see things incredibly clearly. Again, thanks for the education. Really appreciate it. Take care.
Thanks for your response man. My pleasure to be one of your supporters. Quick question: how much recording time do you have with your Hayear camera? I want to do my best to eliminate extra parts after assembling a movement, especially chronographs! 😉
I got this setup because of this video, its made life so much easier. just one problem though, the camera can never be in focus when the eyepiece is in focus
Great vid, helped me no end on getting my first scope. One thing not mentioned here, is the simul focus versions. If you want to be able to use the 2 eye pieces and the camera port at the same time you’ll need a simil focus unit. I believe the model above (4T) has this function.
This is true but never really a problem for most people who don’t need a screen view and microscope view at the same time. Now if you are constantly taking pictures the upgrade my be worth it for sure.
@@watchrepairtutorials absolutely, great bang for buck if just doing it for yourself. I’m uploading my learning process for TH-cam, so need to be able to record as I see it. I also found another brand “Vevor” which seems to be exactly the same as the Amscopes for about 60% of the cost. Looks like they’re from the same factory. Thanks for all you do, appreciate the content!
@@watchrepairtutorials Thanks Alex. I did have a quick question. I have a Celestron 44340 digital microscope that I bought before your informative video (fortunately I got it cheap). Question: do you think I could mod my digital microscope by adding a Barlow lens thus doubling the field of view and working area?
Nice setup, but 10x eyepieces X 4.5 equals 45 power. Not 450 power. I Had a Richert 570 gem scope with a doubler which is only 240x . great for gem inclusions , with a fiber optic light , but about half inch clearance. Great channel. Where did you train? Thanks for your knowledge & sharing.
I have a digital microscope I use for inspection and I have a head set with lenes that you can change they go from 3-15x, and I use a very bright headlamp has worked great so far. Great video and thanks for sharing your knowledge.
Alex, thank you for making this video. Right now saving up to buy a microscope setup. You explanation regarding what to consider and what to avoid, the rationale behind it is awesome..
Another great vid Alex. So grateful for your channel. You really get to the meat of the subject when it comes to watchmaking, servicing, and repair. I have been servicing and restoring vintage timepieces for a bit over 3 years now and primarily focus on vintage Seiko with specialty in the vintage 6139/6138 chronograph. I also love the vintage divers Seiko produced in the late 60s and through the 70s and early 80s. You are correct, the bifocal microscope was a game changer for me when it came to inspection and repair. Thanks again and I look forward to your next series of vids. John S
Hey John, Like I have said to others, if anything maybe I can give you another way to look at problems or techniques that may fill in the blanks of what you already know. I to am a fan of. Vintage Seiko’s, I have a 6138 in the shop right now. Seiko has a long history of very dependable movements to work on. Thanks for being part of the community we are building here. Alex
Hi Alex, been into watchmaking only less then a year and still gathering equipment and tools. your streams are great and its a great addition to some other utubers I follow. thanks and keep on going👍
Many thanks Alex, another great vid! I have a cheap AmScope 10 x 2 on a boom that ive been looking to replace, it’s done me really well, but it’s time to upgrade at some time maybe to your setup! Looking forward to the next ones. Most interested in balance and hairspring work. Ta buddy!
@@watchrepairtutorials Cool! Mainly hair spring bending. Especially when you are uncertain what the shape should be. I had one recently that was a right mess neat the stud, I couldn’t tell if it was a Ben or the correct kink that is often there. Tips and tricks, tools. Fitting a new spring on to the staff etc. Ta!
After many months spent following watchmaking channels, only today did the TH-cam algorithm offer me this channel! However, in my modest experience as a watchmaking enthusiast, this is the most educational and practical channel and closest to attending a watchmaking school (which, in fact, it is..). Thank you very much.
That’s what I’m going for so thank you.
I spent two weeks in engraving School struggling with working distance. Why in the hell did somebody not tell me this? I use a couple of antique Bausch & Lomb stereo Zoom scopes which I can highly recommend- even more so now that I have acquired .5X Barlow objectives for them holy cow is this amazing. Thank you for this game changing piece of information. I spent more on my engraving classes then my first two cars and nobody bothered to let me know I could improve my working distance I had to see it from a guy on a TH-cam video.
I did the exact same thing a couple off months back. And yes, the .5x Barlow was a great investment for my old B&L Stereozoom. That said, one does have to be patient to find that lens at a decent price. Cheers.
I'm surprised that Alex doesn't use a stereo microscope, since the ability to sense distance in the view is a huge plus when working with small components...the 0,5x Barlow lens i had not thought about, probably because the microscopes that we used at work (surface mounted electronic components) had low enough magnification, and enough stand-off distance... great that you guys invested in stereo microscopes!
I would be interested to know which antique Bausch & Lomb stereoscopes that you would recommend!
Thanks!
@@raemelloh I have three total and they are all stereo Zoom 5. I have not made more than 30 for any of them. A little cleaning and they are like new. The critical issue is the .5x diopter. Those are much more difficult to find
a lot to be learned from youtube videos
Alex is one of the best !!!!!!
Mr Hamilton when you said the amscope was a game changer you werent kidding... i am still learning how to service a movement but this thing makes the process 1000 times easier.... now if i could just fight my jumpiness lol
What I love about Alex’s video.. he addressed most of the other microscope reviewers avoid talking about. ‘Working distance’ - this is so critical if a hobby watch maker is going to use it for oiling cap jewels etc. that’s primarily the reason I want to get it. To be able to see better on what I am working on with two eyes..
Just fyi. Initial magnification is .7 x10, so 7 times. The zoom is depending on model 4.5 or 4.7 or other, so 4.5x10 = 45 total magnification. You can verify by looking at a ruler. Lowest power will show 35mm to 45mm, at full zoom it will show 2.5 to 2mm in the eyepiece.
Hope that helps.
Yep, I misspoke.
I would say that the important thing is that it's a stereo-microscope. The zoom capability is a valuable addition, but the most important is that you get a stereoscopic view. (3D-view for lack of a better term.) The left and right eye are looking from slightly different angle. That way you're able to accurately judge distance.
This is the type of video i look forward to watching
Thanks Arthur. Check out my playlists
I just purchased an Amscope SM 4NTP 7x-45X Simul-Focal, and what a difference. Thank you for another superb video!
I hope you like using the new scope. Think you’ll find that it makes a world of difference and opens up a whole New World.
Just when I thought it couldn’t get better, Alex reaches a new high. Adding a binocular microscope to my bench was an absolute game changer. I could finally see clearly when trying to coax a hairspring back between the regulator pins, inspecting the gloss surface of a cap jewel, and other routine (and not so routine) tasks. Mine is optically superb, but the working distance is too small to be able to use a screwdriver. But maybe a Barlow lens would help with that, I’ve now learned. The specific info on microscope and cameras setups will help a lot of watchmakers who look at Zeus’s dissecting scopes and faint when they see a $10k price tag! This is the best watch repair channel on TH-cam, for aspiring watch repair techs who need to know what they need to know. Bravo!
Hello again my friend,
Absolutely a game changer.
I had been using a stool for my microscope bench but just recently changed it so that I could use the same chair and just flip around to my height bench. That has made a noticeable difference in my work flow.
Hopefully you can get a Barlow for your microscope because once you get accustomed to it, working becomes much more relaxing.
Thanks Paul
Alex
My channel is ok as well, correct:). I agree with you, Alex is amazing
I bought one of these microscopes from Cousins here in the UK and indeed it's a game changer. Moreover, you Alex are a Life changer, with you clear eloquent and informative videos which have totally rekindled my love of repairing vintage watches. I look forward to your next one, Thank you.
Well sir, I don’t know about that, but I love the community here and I am glad you are part of it.
I’ll see you this weekend.
I want to thank all my Patreon supporters and subscribers that have made donations to the channel to help in my journey to bring the type of information left out from other watch channels.
Thank you to all.
Steve Stroschein
Christopher J Vincent
Vincent Tiger
Mike Maltese
John Boyarsky
Paul Schumacker
Ray Everett
bill doog
Joe Chambers
Marcel Gustafson
James Pelletier
Great video as always. Good delivery and thorough coverage of the topic of microscopes. I bought this exact microscope when I got into engraving and was very happy when you endorsed it for working on watches.
@@rakhlin there are higher end scopes available but with all things considered, this setup offers a lot of bang for the buck and really makes the work a lot more enjoyable.
Alex, you're great!. I took your advice and got my watch running😁😁⌚⌚
In a fair world, there should be at least 4 more zeroes on that subscriber number of yours.
Hey man, it will get there. Thanks and I’m glad it helped.
Alex
Thanks for the info my dude! Always a blast learning from someone whos clearly knowledgeable and doesn't feel the need to pack a bunch of BS filler into their content. Straight forward and breviloquent that's you man.
Dude I had to look up breviloquent. Thanks so much. I hate the BS as much as the next guy.
This was so helpful as a beginner! So succinct, great explanations👍👍👍👍👍
Thanks! It’s all about making it accessible.
Your classes have been terrific. I'm getting ready to re-watch them as I know I'll learn things that I missed on the first viewing. Thanks for all your efforts.
Sounds like a plan. Let me know if you need any clarification on anything.
Well, after a year and a dozen movements, I made the plunge. Thanks for sharing and all the information.
Fantastic! Don’t hesitate to reach out if you need anything
I have been very busy lately, but as soon as I find some time I run to watch your videos. Thank you very much!
Again, thank you very much.
It’s always good to see your smiling face.
I purchased the microscope, Barlow lens, and light ring, using the links you provided. Thanks for making it easy. I'm pretty sure I'll buy the camera soon for recording disassembly. I've serviced 5 movements now with great results. I find myself doing everything under the microscope. Almost feels like cheating. Thanks for the help!
That’s awesome to hear. It doesn’t take long to get accustomed to it and it makes everything so much more accurate and you can really see if there is any dirt left behind.
Alex. Thank you. I've followed you since your first video. I think I found it within a couple of hours of inception. I'm now able to disassemble, clean, assemble and get a watch running. Always poor amplitude, but it's a great feeling. I view your new videos eagerly, and once a week review all the others in order. I'm an anorak (nerd), but I have learned so much. Each time I view I find something that refreshes the learning.
I am at the stage where to continue with you feels that I have my own personal mentor. Your comments of the later stage of the video sounds absolutely fabulous.
Thank you
Ross
Ross,
It’s comments like this that really make all the work worthwhile.
From the start, I wanted someone, who had never looked at a watch movement before, to be able to follow the videos and complete a successful watch service.
I knew, that for many people who view watch related videos, they would find them somewhat below their level of experience and that these videos I was making would never really be successful by TH-cam standards.
What I did know, was that for the ones with zero experience these videos potentially could be the difference between starting off with great enthusiasm for Horology and then quitting in frustration because they just can’t figure it out.
Thank you for validating what I am doing.
Alex
Finally! Someone goes over a microscope use and the particulars.... Nice work!
Thanks Mike,
Hope to see you here again with us
Great video. Wish i had room on my table for a setup like this.
If that is the only problem, time to go garage-sailing for a new table, or a sheet of wood and a couple of clamps. My problem is lack of green, and no desire to use my excellent credit card balances to purchase all this fine stuff.
Look into the Amscope SM1TZ. The base is only 1.2 cm high and a Bergeon 7808 mat covers it almost perfectly. The base becomes your work mat. Same microscope head as Alex's I think. Includes the 0.5 Barlow.
Thanks for your unselfish way of helping us watch enthusiasts.
Thank you for the recognition of what I’m trying to do. It’s a great feeling knowing that people like yourself appreciate it.
Your closing on this video was reassuring. Being retired and physically impaired, i am excited that i will have enjoyable and knowledgable instruction for some length of time. Looking forward to it!
Wonderful. Let me know how I can help, OK?
Hi Alex,
Again an other informative video from you
Each of your 18 videos has taught me so much and again gave me the confidence to actually start disembling watches, obviously making mistakes, but fortunately learning from then and growing in confidence,.
Look forward to more of your watch knowledge my friend,.
Hello again Eddie,
These types of comments make my heart soar. Thanks and stay tuned. The good stuff is coming.
@@watchrepairtutorials
You are very welcome Alex,
You just don't know the confidence you instill in people like myself, with your down to earth simple explanations of watches and how they work and how to work on them.
You're a great auritor and as l said l've learnt more from you in your 18 videos, than l've learnt in a year, watching other channels,.
I sold my machines to eat and pay rent so while this is interesting stuff I did fine without 40 years ago,I will just watch you and enjoy Thank you!
I appreciate you watching Mr. Crandall
Like the many others, thank you for this video, massive help to me. We have a microscope and finally now I understand what I need and don’t.
You are welcome Tom. Have fun.
Our AmScope at work has soft rubber eyepiece caps that extend a hollow cylinder for about 0.5". It's not usable with glasses on but when you lightly touch your eye sockets to the rubber you have the best view.
That’s interesting. I wear glasses and have no problem. I will have to look at mine to see if there is a difference.
Ok, I've watched the series and ordered a few basics, including a practice movement. I think I'm ready to go back and try and some hands-on. Thanks again!! Def need a microscope if I'm gonna do this much at all, but can't really afford that right now. Got a couple dumont tweezers, a couple sizes of single burgeon screwdrivers, and some other supplies - chinese movement holder set that def needs sanding, chinese spring pin tool, nail tees, a silicone mat (meant for phones, but I think it'll do for starting), loupes, and some little containers for parts. Here I go... thanks again, professor! 🙏
Let me know if you have any questions
So many advantages to using a binoculair microscope! I've heard some hardliners on the watch forums opine that since a loupe was good enough for the old masters, it should be good enough for the rest of the world.... It's just pedantic gatekeeping! By far the best investment I've made in terms of equipment.
Believe me Sven, if they had access to the microscopes we have today and timegraphers they would have used them.
They also used whale blubber as a lubricant, cleaned parts in benzene and dried parts in saw dust.
@@watchrepairtutorials Indeed, they were inventors and engineers, looking for any new technology that would advance their craft and products.
Hi Alex.
After a year of frustration and contemplating giving up because l couldn't see what l was working.
I have all the tools l need now, tweesers, screwdrivers etc etc.
I finally saved up enough money to buy the exact same amscope that you have with the barlow lens for £450.
I cant wait to get back into this hobby and wondering where my passion went.
Thanks again for your input and my reserection to something l thought.l had lost Alex
Great to hear! Let me know how it goes after you get set up.
@watchrepairtutorials
Hi Alex, all set up and Wow !!!! I can see properly,
My first point is just how disappointed l am about the condition of my bergeon screwdrivers. Once l saw them under the microscope.
I have now disassembled a bulova art deco, cleaned and oiled it, only to find out that my setting lever was broken, and l'm just waiting for a replacement.
Also l learned the value of having a good pair of tweezers and not losing small parts, it is a journey of learning.
Once again, l thank you, Alex, for your inspiration and your knowledge that l have learned so much from.
My next steps are to save up and purchase mainspring winders and a few other items and continue to enjoy that feeling of taking something that is broken and bringing it back to life, l'm stearing more into vintage watches, as like an archaeologist vintage watches have a history and a story to tell from the people who wore them and the love they had for their cherished watch.
I have, at the moment, 8/9 vintage watches waiting to be serviced, including 3 Omegas, Oris, Mondaine, Montine of Switzerland, Paketa, a Perona, a Gruen and a Glashutte.
Enough to keep me occupied for a wee while and all really down to you, Alex, and covid when watching YTube and seeing one of your videos, l said to myself ( l can do that 🤣 ) Aye Alex Thanks !!!
Thanks for you commitment and quality of expression Alex. You are a skilled craftsman who shares, not withholds, and who uses a major amount to time to benefit others, even for people like me who will probably never take apart a movement but who enjoys craftsmanship.
That’s very kind of you John, thank you
Thank you for the video. Yes I have been debating purchasing a microscope. As I have aged I have begun using readers to see up close and I hate switching between loupe and cheaters.
Well John like I said I think it really changes everything and how you work as well as the quality and precision that you can do the work. As a person who wears glasses I find it much more comfortable looking through the microscope then full in with loops.
For me i just got myself a hi res digital microscope last month. it already has already become invaluable. I can do some work under it, but i love it for inspection and fault finding. its been a game changer!
Great to hear, I am getting to review a new digital microscope..
I knew you were a microscope type of guy ! 😂 I bought mine back in May ( Amscope SM-4TZ-B ) and I can’t see working with anything else unless like you said replacing a jewel, fitting hands etc etc. where you need to use a jig which precludes microscope use. Ive been buying tools since January of this year and I’m 90% done. I can say I’ve spent a boatload of wampum but I just can’t see working with anything less. Glad you came up in my Home Screen and doubly glad I’ve subscribed. I’m one step away from Patreon and it will be my honor to do so. Again much thanx and look forward to your next vid. 🍻Cheers Alex !
Hey may friend, are you across the pond?
I agree. I can’t imagine doing it any other way at this point.
It really helps old guys like me. 😆
@@watchrepairtutorials I’m born and bred and still in New York City. Ditto on the older eyes , I’ve passed the double nickels and I’m workin on the big 6 0 so I’d have to agree with ya there.
@@khronosbest9448 I’m pushing 63 my friend. I hear ya
@@watchrepairtutorials
73 myself and still ticking. The scope is a necessity.
I am retired and I find watchmaking a great pastime and it keeps the mind sharp as a balance staff.
It has taught me patience and keeps me in-beat.
Also reading everything that I can get my hands-on is also a big plus for the learning curve.
@@TropicalSpeed That’s absolutely right Ray. As they say, use it or lose it.
After watching this video and also previously purchasing a digital microscope. I decided to pull the trigger on this entire setup. It was expensive but after using it for a few days, I don’t regret one penny. What an amazing tool. Thanks for your content.
Glad I could help! Would you say it is a game changer ?
@@watchrepairtutorials That’s an understatement. Absolutely a game changer. I’m a 49 year old crane operator and not used to dealing with things this small. I tried working under the digital microscope and nope. Used the other normal stuff and still have a hard time. The first time I used the stereo microscope, with the ring light.. I was like “you have to be kidding me.” Absolutely the best money I have spent on this.
@@jeremyhippenstiel4637 Well that’s awesome to hear.
Crane operator? That’s gotta be pretty cool. Send me a picture from up there some time. I would love to see it.
Alex
This was very detailed pretty complete and very concise and easy to understand. Thank You Alex you're a Boss 🫡🤝
Thank you my friend.
This one was chocked full o' gems! The microscope is just an essential part of kit IMO, and you can't do a good job without proper magnification. This is one of those subjects that people are always asking about, since microscope options can be quite confusing. I gladly joined the Patreon too -- I've used this channel as a resource so much, it's only fair to help support it in return.
Wow thank you man. Any money that the channel could generate or just go back into future videos to increase quality. Your support is much appreciated. What’s your first name?
Great video... the camera, adapter, and lights are here... barlow comes tomorrow and scope comes saturday :)
You’re going to see watch repair in a whole different way. I remember the first time I went from a loupe to a microscope. I asked, why are we using loupes?
@@watchrepairtutorials i can't seem to get comfy with a loupe any way... i have the monocular style, a pair of loupe glasses, and that wire for the single loupes... dying to try out the new rig.... thank you for keeping us... excuse the pun... in the loupe
Done it. As you said, it's a game changer. For Christmas my bride gave me a Digital Microscope g1200 (on offer at £35). Not to the standard of yours by a long chalk, but brilliant all the same. Within a minute of switching on I found an error of my own work. A spring holding a jewel on the on the balance of my Sekonda 2428 was not actually central. It looked it, but on magnification I could see that it was off centre. So obvious! As they say in Latin. Tarrus Verius Mutchus.
Well Ross, everything becomes more clear that’s for sure. It’s just like the first time you switch on a timeGrapher and you see your work was not quite as good as you thought. But it’s all a learning process and the more you know, the more confident you get and the more enjoyable your work becomes.
Merry Christmas my friend
Hi!! Thank you very much! Your videos are the best of the best! And you is really great man!!! I like this so much. Great respect from Belarus (it's the little country near Lithuania and Poland, and Russia))! See you necessaraly!!! I wish you good luck!
Glad you like them! Stay safe my friend 🙏
Thank you very much! Всё будет хорошо!!!
@@ВаськаПетрович-щ6б надеюсь, ты прав, мой друг
Very informative Alex, well done on the support from the community you deserve it.
Thanks Billy
Alex I can’t thank you enough for this video. The amount of information and the way it and all of your videos are presented are fantastic. I am just a hobbyist and have been trying to work on watches for about a year now but kept having issues with magnification. After watching this video multiple times I did some additional research and starting watching for a scope of my own. I now have a Amscope SM-1TS-V203 and am awaiting my camera. The difference in my ability to see and focus is immense and I am able to work with much more confidence. I can’t thank you enough for this video and helping me solve my issue with magnification.
It makes all the difference in the world doesn’t it.
Thank you Alex I learn so much from your videos. Look forward to your upcoming videos
Thank you so much. I appreciate the words of encouragement.
Thank you very very much for all the previous videos, each and every one of them has been (and continues to be) a priceless mine of information. And please keep them coming !
I will. Thanks Mr Barker
You're The Man, Alex.
Thanks for taking the time to pass along all this good information and in a clear and concise manner.
Looking forward to future installments of yours pertaining to actual repair.
Yes, the "scope" is an integral part of my workbench.
Mine consists of a hodge-podge of components, some bought and others homemade.
The foundation is a Hayear 48Mp camera screwed onto a Hayear 180X Zoom lens. All this is coupled to a ismartView 10" HDMI monitor. I believe this setup is the best bang for the buck compared to those ready-made inspection digitals currently available.
I have a cheap LED ring light just like yours.
I took it a step further and cut a filter for it out of some polarized thick-film material (B009P8B548) in the shape of a ring to cover the light and I added a screw-on circular polarized lens (B003USTMIU) along with a ND filter (for protection) to the bottom of the camera lens. Having polarized light allows me to dial-out unwanted reflections and see detail that was previously obscured and it allows me to see into things like jewels, screw holes, hollow items, and the like. I suppose polarized light will be a matter of personal preference but I find it very useful.
To rotate the polarized lens, I drilled & tapped the side of the ND filter, which is on the bottom of the polarized filter, and screwed into it a 4-40 thumb screw from an old serial data connector which is about 2" long and it makes a terrific handle. I liked it so much that I installed one on the Zoom-ring of the camera lens too.
Spending less than $30 converting an ordinary LED ring-light and camera lens using readily available materials saved me hundreds over a factory-made polarized ring light.
Here is a Dropbox link for a pic of my setup:
" www.dropbox.com/s/vzhq5afy0m7ai1r/IMG_3448.jpeg?dl=0. "
It is zoomable or you can download it and zoom in yourself.
Cheers
Hey Ray,
Good to hear from you. I am going to give your lens filter a shot. Reflection in shooting video is a bit of an Achilles's Heal for me.
Thanks for that tip.
@@watchrepairtutorials
Glad to be of some help, Alex.
I wanted to leave a link to a pic in my Dropbox but.......
Let me know how it went and good luck with that.
A Polaroid brand circular polarizer filter is a good choice and it is cheap - and just as good as the more expensive Hoya or Tiffen polarizers.
Im going to get that micro set up once Im deeper into the watch making hobby. Still very much a novice. Great stuff. Cheers from the Netherlands.
It’s a good choice and you’ll never look back
Another great educational watchmaking video Alex, the microscope is my next and hopefully last bigger investment, my wife is looking for the rolling pin. Looking forward to your next series
LOL. I have found if you order it around Christmas it’s much easier to sneak in.😂
Easily the best microscope video on TH-cam and I've seen most. My field is electronics but I will definately be watching your back catalogue. Your descriptive style is just what I need. Thank you.
Welcome and thank you. See you again
Great stuff Alex,
Been putting off getting the microscope for too long. Now I feel informed!
Look at it like this it’s the one tool that you will use constantly. It’s usefulness is undeniable.
You are awesome! Just want to say thank you for making these videos! Just note, that YOU are appreciated kind sir!
I appreciate that! And back at ya brother
very informative Alex, well done on the support from the community.
Hey Billy G,
I love it man. No kidding. My wife is actually amazed.😜
I got some dentistry loupe lenses or use a stereoscope. But the dentistry loupe lenses are my go to because I can sit in a chair and my hands are free to move. Say a hairspring is out of alignment (uh oh). I can see the thing without a screen and my wrists can stay completely vertical to the horizontal lying hairspring. I highly recommend looking into them! They’re expensive but oh they save me!
What brand did you settle on?
I almost bought the scope you linked to, but I'm glad I did a bit more research before I hit the "pay" button.
The scope you linked to doesn't have "simultaneous view", and you have to pull a little stainless steel rod to divert the optical path of the left eye into the camera, thereby depriving you of the ability to see in stereoscopic view while using a camera. Which really sucks, I would have been sad if I spent $500+ on unsatisfactory equipment. It only costs like $50 more for the simultaneous view head.
It's a pretty important detail, and you left it out.
And also, the magnification of this scope without a barlow lens, with 10x eyepieces is 45x, and with a 0.5 barlow lens the max magnification is 22.5x.
Regardless, I appreciate the lesson. 99% of what you said is true, and I did learn from this video, and for that I thank you.
For most people working on a movement, they are probably not using a camera so the simul view is not a deal breaker. I'm glad you got what you wanted.
@@watchrepairtutorials I think most people that get a "trioptic" for watch-work plan on using a camera...I mean, that is the whole point. I plan on using it to record the disassembly process, so that I have documentation on how it came apart to refer to as I put it back together.
I really think we need better terminology, I think the heads that divert the left eye should be called "Semi-trioptic", and the simulview should be called "full trioptic" or something. It's much too confusing for a $500 piece of equipment.
@@watchrepairtutorials I'd at least put a note by your link in the description something like "*this model switches to a right-eye only microscope when camera is in use"
Great video. I'm a newbie in watch repair and only watched a few of your videos, but you always present clearly and make it very easy to follow. I've used plenty of microscopes for work, including optical and SEM that cost thousands and thousands of dollars. I'm surprised that a cheap microscope is all you need to make your life easier. The right tool for the right job, as they say. I'll definitely look into one for personal use.
Thank you so much for sharing your insights. You are helping many watch enthusiasists out there!
Thank you my friend although cheap is relative to your pocketbook
Initially I used 30X loupe for inspection and oiling, then I got one of those chinese microscopes for a very reasonable price.
I still have good eyes, strong magnification is not such a big necessity for me, but using it reduced a lot of fatigue, because I can now recline while doing certain tasks.
Good Point. I would imagine many people are working in a very uncomfortable positions.
thanks for sharing, great advice on using a microscope....ordered one, this should be in next week.
Let me know what you think Pipo
Absolutely spot on advice Alex.
She Who Must be Obeyed (SWMBO) bought me an Amscope for Christmas this year and I pouted like a child until SWMBO agreed to let me start using it before Christmas Day. It's a complete game changer for me. I struggle with a loupe as I wear varifocals and the focus was constantly changing when I moved my eyes around. The microscope has allowed me to lubricate pallet fork jewels with ease, replace the pinging incabloc springs without turning to drink and lubricate the whole movement with confidence that it's getting to the right place with the right amount.
Managed to pick up a clearance stereo Amscope with boom arm, .5 barlow lens and an LED ring light for £240 which I consider a bargain, given the amount I'm now saving on blood pressure medication.
That’s is so funny. I can imagine having that exact conversation with my wife. LOL
When you think of all the money spent on a wide variety tools, is there anything you can think of that has made such an impact as this microscope ? Probably not.
@@watchrepairtutorials Completely agree. The other thing that shocked me is the tiny particles of hair, lint and crud that can be sitting on your tweezers or in a jewel that you wouldn't notice through a loupe.
@@thegrumpymuso5418 LOL. Ain’t that the truth. Just like the timegrapher shows you how good your service work was, that kind of magnification shows you how clean your parts are. I will look at the movement and do any spot touch ups on the jewels or find little particles in a crevasse sometimes. It’s really amazing how much more precise you can be and I’m ticked to death you can see it too.
Great content. I have a question regarding the last, less versatile scope. Can’t you replace the oculars to get the magnification you want and switch back and forth? I realize that doesn’t provide zoom, but if someone wanted to go fairly bare bones and light weight (or for just quick looks) seems like it could work.
I am not sure Mike. Finding parts that fit these types of microscopes might be challenging.
@ Could be the case. Most I’ve seen when looking around seem to come with 10x oculars regardless of other configuration. I just remember my old refractor telescope as a kid and that was the only way to change the magnification, other than to add a barlow lens. Just wondered whether the same kind of applied re oculars on stereo microscopes.
Thanks again for the great vids …
Yet again another very enlightening video, I fitted a digital camera like yours into the camera port by making a simple spacer ring, it is used to take pictures of the piece that I am working on as my memory is not as good as it used to be. I totally agree with your assessment of the advantages of a microscope.
Like I said Chris, to game changer. See you again soon thank you buddy
I finally took the plunge and purchased a microscope. Amscope SM-4 TP and its incredible !!!!! its a game changer !!!
Good for you Sonny. You just upped your game.
@@watchrepairtutorials So true. Im also delving into the tiny world of micro rotor hamiltons and bulova So its a needed upgrade.
Another great video Alex. It can take a little while for the brain to sync up to get good hand eye coordination. I got two selections of click and other springs along with a selection of screws for a total of six pounds GB. Spent a few days moving them from container to mat, turn the over and move them to another container. This worked really well with the added advantage I might have some spares when I sent springs/screws to the Swiss space program 😂
You are a smart man Tom. That will pay off in less lost parts. Trust me on that.
Thanks
Many thanks my friend
Excellent series, great information.
Thanks for being here Andrew.
Agree 100%. As a novice, I'm only on my second practice movement (a Seiko 7S26) and have used only my microscope with it. I can't imagine working on Diafix jewels without it. I use the Amscope SM-1TZ with a 0.5 Barlow and a LED ring. It has a 1.2cm thick metal base with length and width that seem perfectly sized for a Bergeon 7808 work mat. I removed the two base clips and made a small cutout in the mat to accomodate the vertical post. The mat basically completely covers the base, whose thinness now makes it an ideal working platform. The 0.5 Barlow allows easy and comfortable use of tools. You get depth perception not possible with a loupe. Diafix cleaning and lubrication is still a PITA but it is doable and getting easier with more practice. The microscope was my first major acquisition after screwdrivers, tweezers, and oils. Should have a timegrapher by next week to further up my game.
Hey John, Thats awesome to hear. A lot of new watchmakers don't make the connection to the microscope so early so nice job man.
I found assembling the train of wheels of a ST36 clone quite difficult with a loupe (even with an Ary clip on for my glasses.) The lack of depth perception is frustrating and the back and forth between loupe and glasses taxing. Having your head so close to the movement for so long is uncomfortable. Ended up taking my glasses off and using naked eyes up close. That movement is large enough to make unaided assembly of wheels possible. The incabloc chaton of the balance is another matter. You can't do something properly if you can't see exactly what you are working on and what the tweezer tips are doing. So I got the microscope. A real game changer as you said. Optics are as essential as good screwdrivers and tweezers.
I have a times 70 microscope that is priceless. Had I known earlier I would’ve got the microscope with the camera attachment, but I didn’t. I also did not know about the Barlow lens and that’s a great idea for giving you a little more freedom under the microscope. my microscope is a DSZ70 and it cost around 1000 bucks used.
Yea man. You know how big of a difference it made for you. I really don’t know how I could work without it.
Thank you Alex, I am very new to this hobby and after viewing about 10 of your videos I must now evaluate my direction. You may have saved me some pain and suffering :)
Hello Keith,
What issues are you having or what do you think needs changing ?
Great information Alex. Thank you so much.
Thanks J
Please clarify the objective lens specs on your recommended SM-3T microscope. In your video @ 1:34 the objective lens spec is stated as 7x to 45x.
The manufactures lists it as 0.7x to 4.5x (note decimal point)
Thanks, I am thoroughly enjoying your videos and your ability to so clearly explain all in the intricate details and share your vast knowledge.
.7 x 4.5 commonly referred to as 7 x 45
The way I understand it is that 0.7X - 4.5X is the magnification that the microscope head provides. You then factor in the magnification of the eyepieces to get the overall magnification. So, with 10X eyepieces, it ends up being 7X - 45X. Add in a 0.5X Barlow lens and gets halved to 3.5X - 22.5X overall.
I got me a Vevor microscope which is basically a Chinese made thing like your Amscope. Barlowe lense is included. Absolutely great, i love it. Tomorrow my micro four thirds adapter for my Panasonic camera will arrive. Looking forward for it. :) 🕐⚙️🍸
Very cool! It will make a huge difference.
Alex thanks for video brother! I just ordered the setup... Just so everyone knows it ran me $688 US plus tax. The scope was on sale at the time I purchased.
That’s awesome. Where did you get it?
@@watchrepairtutorials Amazon
@@chuckw4203 wow you really jumped all in.
I will be interested to see how much you like working this way.
One thing I did was to turn the stand in the opposite direction and then I have a bolt that goes through the base and my work top to keep the scope from tipping over.
This will give you more distance between you and the base.
Let me know how you like it.
@@watchrepairtutorials Yes sir I have been looking at this type of setup for sometime now, This setup is about $600 cheaper than the one I was trying to put together. I'm excited to see how it will work. My eyes aren't the best anymore . Good to know about the stand thanks for the heads up!
Just ran across your videos. Fantatic. Going to do a video dumo starting with your first. This one is a year old so I think I have a lot of viewing to do.
Keep up the good work.
Hey brother, that sounds like a plan. Just let me go ahead and apologize for the quality of the first videos. I was new and didn’t really know how far this thing was gonna go. But the information is still good if you can get through the audio. The plan on remaking them as soon as I’ve got a few minutes extra.
39000 views. Wow Alex. Thanks for the info. Your a good guy for doing this bud.
No problem 👍
Hi Steve, I boutght this exact setup and it is everyything you say. Its a different hobby now. Thanks for laying this all out!
Happy to hear it. Yea no doubt it transforms the whole experience.
Alex
Thank you Alex for the video. My cheapo setup needed a 0.35x barrow but it works. Who knew being able to see what you are doing makes it easier to do what you need to.
Hi Stephen,
Game changer right?
Very informative Alex, thank you very much. I am working with a bare minimum tools, nothing hi-tech.
Glad it was helpful! It’s a place to start when you are new but as time goes on you will want to start upgrading your system.
The real game changer will be an affordable 3D printer capable of printing durable metal parts for antique watches. I'm DYIN' to get one of those!
Well for about $1000 you can buy a lathe I think the technology will have to be able to print in 100’s of a mm and certain parts like pivots would still need to be finished by hand.
Excellent video. Really appreciate your helpfulness. I just ordered the microscope and each of the items you suggested by using your links. You more than deserve the fees that you earned. Again, appreciate your help!!!
Glad it was helpful and thank you. I would like to hear from you after you get it set up and running.
Alex
Will receive the microscope in several days. Will let you know how it turns out. I bought a grab bag of 20 movements for $20 from eBay to practice and develop my fine motor skills. Already killed 1 seagull movement. Don’t want to repeat my mistakes. Looking forward to being able to really see things clearly. Take care.
Alex, got my microscope, light and camera. Did you download the software from Hayear to run the camera? The microscope is amazing. I can see things incredibly clearly. Again, thanks for the education. Really appreciate it. Take care.
@@SkyBlue-le7cd I just plug it into my laptop and it runs on the camera app.
Thanks for your response man. My pleasure to be one of your supporters. Quick question: how much recording time do you have with your Hayear camera? I want to do my best to eliminate extra parts after assembling a movement, especially chronographs! 😉
The recording goes through the camera app in window and is really only limited by the size of your hard drive
THANK YOU ' ALEX ( GREAT VIDEOS) LEARN A LOT AS A HOBIE'S DURING THE PANDEMIA!!!
RALPH.
Awesome Juan,
I have some other videos coming up you may be interested in.
I got this setup because of this video, its made life so much easier. just one problem though, the camera can never be in focus when the eyepiece is in focus
adjust the focus on the eyepiece.
@@watchrepairtutorials thanks for the reply. I tried that but it never seems to be able to get in range
@@-Rodders interesting. Have you played around with the height of the scope? What are you viewing the feed on?
@@watchrepairtutorials I tried different heights and different cameras as well
I figured it out, I was missing the spacer between the camera and the adapter
Great vid, helped me no end on getting my first scope. One thing not mentioned here, is the simul focus versions. If you want to be able to use the 2 eye pieces and the camera port at the same time you’ll need a simil focus unit. I believe the model above (4T) has this function.
This is true but never really a problem for most people who don’t need a screen view and microscope view at the same time. Now if you are constantly taking pictures the upgrade my be worth it for sure.
@@watchrepairtutorials absolutely, great bang for buck if just doing it for yourself. I’m uploading my learning process for TH-cam, so need to be able to record as I see it. I also found another brand “Vevor” which seems to be exactly the same as the Amscopes for about 60% of the cost. Looks like they’re from the same factory. Thanks for all you do, appreciate the content!
Thanks!
I appreciate your support brother. Let me know if you need anything.
Thanks!
You bet! Thanks brother
Another awesome video Alex. Keep up the great work. Your videos are really helpful on my journey toward learning watchmaking.
Let me know if you need anything
@@watchrepairtutorials Thanks Alex. I did have a quick question. I have a Celestron 44340 digital microscope that I bought before your informative video (fortunately I got it cheap). Question: do you think I could mod my digital microscope by adding a Barlow lens thus doubling the field of view and working area?
@@marklester2105 I’m not familiar with that microscope. Have you checked to see if they have a Barlow available for it?
@@watchrepairtutorials I checked their website but they only carry Barlow lens for their telescopes.
@@marklester2105 oh that’s to bad.
Thanks for this information, it was exactly what I needed. I saved your exact setup for a future purchase.
Glad it was helpful!
Nice setup, but 10x eyepieces X 4.5 equals 45 power. Not 450 power. I Had a Richert 570 gem scope with a doubler which is only 240x . great for gem inclusions , with a fiber optic light , but about half inch clearance. Great channel. Where did you train? Thanks for your knowledge & sharing.
P.S. i meant 120 power, gettin old!!!
I never was very good at math😄
I trained at The British Horological Institute in England in the early 80’s.
Mr Hamilton, the white binocular it's look like Wall-E 🤖
TNX! Great video as always
It does. That’s funny
I have a digital microscope I use for inspection and I have a head set with lenes that you can change they go from 3-15x, and I use a very bright headlamp has worked great so far. Great video and thanks for sharing your knowledge.
The Absolute best set up is the one you are comfortable with. Thanks for watching
I really appreciate the perspective and insights to bridge the theory and the reality of the art of watchmaking. Really great videos
Much appreciated Julien
Many thanks!
You're welcome!
Thank you for the great video. Cleared up a bunch my questions with your well thought our script and demos. Awesome!
Glad it was helpful brother
The Microscope package is not as bad (cost wise) as I would have thought. Thank you again.
Have you got it set up and been able to use it yet?
@@watchrepairtutorials don’t have one yet. But definitely on the list of must haves for me.
Alex, thank you for making this video. Right now saving up to buy a microscope setup. You explanation regarding what to consider and what to avoid, the rationale behind it is awesome..
You will not regret the purchase
Another great vid Alex. So grateful for your channel. You really get to the meat of the subject when it comes to watchmaking, servicing, and repair. I have been servicing and restoring vintage timepieces for a bit over 3 years now and primarily focus on vintage Seiko with specialty in the vintage 6139/6138 chronograph. I also love the vintage divers Seiko produced in the late 60s and through the 70s and early 80s. You are correct, the bifocal microscope was a game changer for me when it came to inspection and repair. Thanks again and I look forward to your next series of vids. John S
Hey John,
Like I have said to others, if anything maybe I can give you another way to look at problems or techniques that may fill in the blanks of what you already know.
I to am a fan of. Vintage Seiko’s, I have a 6138 in the shop right now.
Seiko has a long history of very dependable movements to work on.
Thanks for being part of the community we are building here.
Alex
very good advice, thanks
You are welcome!
All my questions just got answered, thank you.
Perfect 👍
This is great. Please continue.
Thank you my friend
Hi Alex, been into watchmaking only less then a year and still gathering equipment and tools. your streams are great and its a great addition to some other utubers I follow. thanks and keep on going👍
Thanks Luc
Thanks!
Thank you very much brother
Great video explained in a simplistic way. Thanks
Glad it was helpful!
Many thanks Alex, another great vid! I have a cheap AmScope 10 x 2 on a boom that ive been looking to replace, it’s done me really well, but it’s time to upgrade at some time maybe to your setup! Looking forward to the next ones. Most interested in balance and hairspring work. Ta buddy!
I am going to be doing some escapement videos coming up. Was there anything specific you are looking for?
@@watchrepairtutorials Cool! Mainly hair spring bending. Especially when you are uncertain what the shape should be. I had one recently that was a right mess neat the stud, I couldn’t tell if it was a Ben or the correct kink that is often there. Tips and tricks, tools. Fitting a new spring on to the staff etc. Ta!