I'm a university professor with a background in watchmaking (in my first life). I'd like to take two minutes to tell you how well-made your videos are, full of practical advice and common sense. Thank you so much!
Well, thank you very much, Professor. Thank you may be stretching the definition of well-made a bit Although I think they might be getting a little better than the earlier ones.
As a starter watch to repair, I bought the ST36 on eBay for about $30. It was the exact same watch you are using in your lessons. I then followed your tutorials exactly as you instructed. If I got lost along the way, I replayed the video as many times as needed until I got it right. I also bought the case that matches the movement exactly for $30. I added service tools as needed for the “restoration” process. Since it is a new running movement, It didn’t need restoration. It’s a whole lot of fun taking it apart and putting it back together.
I'm just getting into this and this is my plan too. I wanted some pocket watches to wear, so I got a couple of old Waltham watches. All working but in need of a service. And my plan is to practice on modern, cheap movements until I get good results, and then have a go at the old movements.
That's my plan too. I've got a 9 year old son who interested in learning watch repair. I'm interested too so hopefully a nice hobby we can enjoy together.
I'm just proud to have been able to open the case and change the battery on a Pulsar that I've had sitting in a drawer for 40 years. It was a high school graduation gift from my cousins. Once the battery died, I put it aside. Now I can do it myself. YEA. I AM starting to collect a few watches and movements to learn how to do service. I have my grandfathers Hamilton automatic that I'd like to get in to. It'll run for a few seconds and then stop. I figure it's going to be gummed up with old oils or maybe even a tired mainspring. I haven't even figured out how to get the back cover off, so no danger of messing anything up yet.
Watching this a second time. In my case, I have a watchmaker friend who trained at Piaget and he gives me watches to fix for free. It's a mutually benefitting situation. I get free advice, parts and watches or clocks to fix and he gets back the finished product. The other day, he made me the ultimate compliment. I fixed two 400-day clocks he was unable to fix for years. Having said this, I'm sure he didn't put in the time to figure them out as he is mainly concerned with expensive wristwatches.
Thanks for this great video, man! I made my local watchmaker rich by first buying a working vintage watch movement from him, trying to dismantle it and putting the parts back together, I broke the balance spring and went back to him for getting it fixed! He calmed me down by saying it is totally okay to screw up, because that's how you learn!
Would love to see video on parts sourcing... I started backwards and have bought several "for parts or repair" watches on auction. (I know, I know...).
Your videos are gold man and my standard go to for lessons. I've been concentrating on the Seagul st36, and the Soviet 3602's to begin with. At a flea-market I found a rare Swiss Montandon pocket watch that needs a balance staff. Will send that to a more advanced watchmaker hopefully to make a new one! Thanks again! 💯
Another great video! I would love to see a video on sourcing parts and another on your microscope setup. Thanks for continuing to put out this great content.
Amazing, this is exactly the information I've been looking for. Indeed, I've asked a bunch of TH-cam watch repair folks for exactly the tips you provide in this video. Thank you, thank you, thank you!
Great Info. I'm starting to acquire the tools to get into the hobby and would appreciate your input on microscopes and the use of digital microscopes (i.e. with a video screen). Thanks.
I've just begun to get involved with watchmaking, as in I've yet to even service a movement yet. Right now, I'm slowly acquiring tools/consumables and bought some old scrap movements to practice on. This answers the questions of what my next step should be and what I should be looking for as my skills progress. Thank you for a very informative video. I'm now subscribed.
Thank you so much for your valuable information. I've taken your advice here and ordered a used watch. Looking forward to see where it goes from there and hopefully get a feel for it.
This is a really great video. And I hope that I have not made any of the most egregious mistakes. I have my grandfather's watch which was a pre Heuer Leonidas. I took it to a local shop who quoted me $600 to get it running again. I figured I could buy a lot of watch repair equipment for that kind of money so I started doing a little digging. My grandfather's watch has a Felsa 690 movement, which seems to be as common as dirt. They are all over the place and it seems like every part is available from somebody. So I have purchased a small handful of watches and movements for spares with the intention of learning on the cheap eBay watches before I crack the case open on my grandpa's watch. Your series of videos has been the most useful of any I have seen so far and I can't tell you how much I appreciate it.
Great video. I made a reddit post about this a while back. Great to see this in the collection. Sourcing watch parts is the hardest thing for me. I'd love to see a video on that.
Your comment on starting with a modern movement and fitting a case is the route that I took. I bought a couple of Seiko NH36 movements knowing I would probably screw up the first one. Actually, I screwed up the second one too. But on the third one, I was able to take it apart, clean it in Naphtha, rinse in IPA, lubricate it with 8000, took the balance wheel off and reinstalled, and adjusted and regulated the watch - following the instructions in the Seiko Service Manual AND YOUR VIDEOS!. To your point, I was surprised that the movement ran better than new but realized it was probably not lubricated well or regulated from the factory. With the movements, a loupe, a good set of screw drivers, and an Android time app, I got started on a great hobby as I enter retirement for not a lot of money. I recommend your option on this. Didn't want to spend a lot of money until I found out if I had the "right stuff" for this hobby. Probably going to get a good microscope net and brush up on my lubrication skills. P..S. My wife works at a jewelry store that sells Rolex and they also have a factory trained watchmaker on staff. She noticed how much I'm enjoying this and said I should consider going to the basic watchmaking intro school they send their staff to. I said I watched your videos instead!
Hey John, That's a great story, so thank you for taking the time to spell it out. I think you made the right moves and now you have a watch to wear that you built, an understanding of the mechanics and at the same time realize that there is a lot more to learn. Keep Learning my friend.
Wow, so much great information for new watch makers. Stumbled upon your channel researching Epilame. Don't understand why more watch making channels don't cover this practical information. it's so important for successful watch making.
@@watchrepairtutorials Just bought your microscope recommendation with Barlow adapter and LED. I had the AmScope you didn't recommend, purchased years ago for electronics. If you go through EBAY, AmScope currently has multiple discounts, $378 for scope and adapter (not including LED). Should get it in time for my birthday! Thanks again, subscribed and rolling through all of your content...
My best advice to you would be to take it slow and focus on a particular group of movements. For example, if you’re a Seiko fan Concentrate on Seiko, an ETA fan find a couple movements you like and work on those. When you’re new the last thing you wanna do is jump around all over the place working on 100-year-old pocket watches, then citizen and Seiko and Swiss. Once you gave more experience that you can start branching out.
Brilliant thank you for the advice, its really appreciated. One more question if I may, how did you polish your oiler that was a great tip and makes perfect sense? Happy New Year! @@watchrepairtutorials
@@yesterdayschild1418 sure, fine polishing compound like Dialux green on a hard felt wheel in a rotary tool. 10 to 15 seconds at a time then check it. It doesn’t take much.
Thanks for these great tutorials; the best I've seen. Enough detail and description for a newbie like me to follow. If you haven't done it yet I surely would like to see a tutorial on microscopes that are not too expensive for beginners. If you've already made one please provide the address to access it. Thanks again for the taking the time to produce these fantastic videos.
Very helpful information. I would like you ask a question on microscopes. I see the one you have will only allow you to use one eye when using your camera to record. I have found they make microscopes that will allow you to view with both eyes while recording video. They call it simul-focus. This would be a nice subject to talk about.
thank you for the guide! I bought a NH36 movement from TMI with the intention of taking it apart and practice some oiling but from the factory it was already well regulated (+0.5s a day) and oiled (everything seems smooth eye ball amplitude with slow mode camera on my phone it looks good); didn't have the heart to take it apart, ended up put it in a case with dial and hands and called it a day, the search for a learning movement continues
Spot on again Alex, i would say sourcing what i need is the most challenging and enjoyment i get from this hobby. i was given a eta7750 in dire need of help, and your advice has been a great help. cheers.
Hi, I'm just trying to make my way into the world of watchmaking or shall I say, watch servicing, and am I lucky to have discovered your TH-cam chanel ? The nh36 is definitely the way to go. I'll be back to you soon. All the best from Croatia...
Another terrific video, thanks so much Alex! Also, love the increased production quality on the channel! New intro, B-roll footage to support your discussion points, etc. -- it's really coming along nicely. A microscope video would be amazing as well. Always like to get more info on everyone's setups, and I think people should just budget in a microscope from the start. 🙏
Agreed! A digital microscope camera setup I found to be a must for this 73-year old retiree. It is indispensable for inspecting components, taking a series of pics during a disassembly, and examining my lubrication and assembly results. My setup consists of a Hayear 48MP 1080P HDMI digital camera with a Monocular Max 180x Zoom C-Mount Glass lens, a bench-mounted stand, and a polarized light source with a circular polarized filter. For viewing, I have a iSmartView 10.1 inch HDMI Monitor with a wall-mounted tablet holder. It opened up a whole new world for me.
@@TropicalSpeed Ray, that’s the ticket. This is valuable and helpful info. People can search for what you are putting in the comment. Thanks as always.
I made the mistake of trying to repair an M24 Timex pin pallet movement. Maybe when I get better at it I’ll try and put it together again. Lesson learned: Swiss basic movement that’s well known and a lot of them were made.
I know I've seen one video about microscopes, but yes, I'd definitely like to know more. I was dismayed to discover a watch I just got off eBay in "non working" order (the seller was honest) turned out to be... completely hosed hairspring. I'm trying to source another movement for parts, but everything I've found is going for more than what I paid for this one, and appear to be "working".
Great episode, i can speak to experience that buying a watch in 35mm to practice on was a mistake, now that i have a little more experience I've bought a donor movement for my king Seiko a well a GSTP pocket watch to work on. But if anyone needs HMT parts, i have two of them fully dissasembled with one small spring missing from each 😂 Where did it go, well I just learned why working in a room with carpet is a bad idea. BTW, I serviced my first Swiss quartz movement for my son in law. It felt really good to have someone i know just being me a watch and ask if i could fix it. Had to order a battery and a pin for his bracelet. But got it working and even though it's an easy job, it sure felt good to have my first happy customer.
Just subscribed and I would have liked hearing those words before buying 20 vintage watches for my first reparations.... Let's see, but for sure the sourcing video would be great..
Many useful tips again. Big thanks. Realized that i was not far off when i bought two Seiko 7009 movments to sharpen my skills on. Cheap and many parts on Ebay. Hopefully there will be one working watch at the end of it.
@@watchrepairtutorials So i noticed. And to top it off i just broke the tip of the mainspring tryning out my new winding tool. Fuck it, time for a beer. Cheers to you and have a nice weekend!
God how I wish you had been around a year ago when I started this journey... your videos should be required viewing for anybody who has been mesmerized by any of the channels that make this look oh-so-easy, before they ever buy a loupe and pick up a screwdriver!
LOL. I run into those people daily. The entertainment channel are good and bad. One one hand, they get people interested in horology in one way or the other. One the other hand that drives up prices on available watches and part availability not to mention all the watches that get recycled back into eBay that have been butchered. Thanks man, see you again
@@watchrepairtutorials it definitely will; thanks. The idea of getting a new NH35 to begin with is awesome, I'll do that; at least I know it should be running after my service. I've been struggling with a vintage 7009a; and it didn't end very well...
Hi Alex, Again more excellent videos, and highlighting the mistakes l've already done, I'm just waiting on my amscope to come, my mainspring handle and 3 winders,. Your sourcing of watch parts was very helpful and its nice to gain this knowledge, l think you're the only watchmaker that provides this type of information,. Also the ebay buying l bought 2 nice seiko's that l like quartz just to wear not to work on, and l've found that although they work fine, the crown and stem seem to pull out of the watch with ease, so as you say ebay sellers, don't know what they are selling,. Looking forward to your next video,.
Thanks for another excellent video. As a beginner, the suggestion of starting with a modern/current movement strikes me as a great strategy to start out. A discussion of microscopes would be super.
@@watchrepairtutorials Thinking about the new movement approach a little more -I suppose that it also allows learning the disassembly/reassembly without necessarily opening the mainspring barrel -assuming that the "brand new" barrel assembly will be OK? This would delay the purchase the mainspring winder until it is "needed". I appreciate the critical importance of the mainspring and servicing the barrel/replacing the mainspring but this could be delayed until further along in the learning cure. Is my reasoning OK?
@@littleviking488 well that is a side benefit for sure. I mean the barrel and mainspring hasn’t really even had time to arrest him out so it should be good and not require you getting in there. Probably the most important reasons are familiarizing yourself visually, visually with correct end and side shake of the barrel and wheel pivots along with the pallet fork. Like I talked about in previous videos, if you don’t know what it SHOULD look like how do you know when it’s to much and needs adjusting. It gives you the opportunity to study what everything looks like when it’s correct. Watch how the hairspring breathes, what a proper terminal curve looks like, what free-running of the power train looks like. If you study a movement that is working correctly then it makes it wayyyyy easier to spot something when it’s not.
@@watchrepairtutorials That makes perfect sense -as you've pointed out in your previous videos. Kind of a "base line" of how things should be so that gross variances in other movements become obvious.
sound advice. I found a perfect movement and dial for an old gruen and never found a case to fit it. just sits in the drawer but might be a good candidate for servicing practice.
Thanks Alex, this particular video reallyhelpedme a lot. Also - Yes, please do a video on microscopes, if you haven't already. Have a great day. -David
Greetings! Thank you for your amazing videos while I have a question - do forgive me as I'm very new to this. At 2:16 you mention that the "dimension between the top of the dial and the centre of the stem have to be the same in the movement as well as the case", can you expand on the reasoning of that? Or better, what will happen if this requirement is not met? Thank you in advance!
Sure. To be more correct the measurement with the dial on the movement to the center of the stem needs to be the same distance inside the case from where the dial sits to the center of the case tube that's a stem comes out of. If it's not, then the stem will either rub on the side of the case tube, causing wear and/or bending the stem. In the case of a stem with a crown that screws down or inserts inside the tube it will either not fit or put a great deal of strain on the stem interfering with the way the keyless works functions. This is the dilemma that people trying to find a case for a loose movement run into. A watch case is made for a specific movement so trying to retrofit a different movement inside a case is very difficult at best requires much trial and error . Does that answer your question?
@@watchrepairtutorials Thank you for the prompt response. Let me try to rephrase your words to confirm my understanding - essentially the entry point of the stem needs to be level all along to the end point of the stem in the movement, otherwise the stem will be askew, possibly damaging the stem or affecting the keyless works functions?
Very very detail explanation. By the way, nice hair. Does it help to be good watchmaker? If it is the case, please have a session on hair maintenance and care.
Thank you Alex! I totally agree with all your advices, because I’ve done this way by myself this year. Cases - the great advice! I like stainless steel cases - it’s easy to return them in a good shape. I started to gain skills using 198-1990 USSR watches - we have a lot of them in Ukraine. And they are extremely cheap ( 1-10 dollars). Then I raised the bar - and next level is Orient watches with 46941 , 46943 movements and Seiko 70XX. Next level need more investments. The time hasnt come … yet )
Hello YT. I hope you are well and safe my friend. It sounds like your skills are progressing well enough. There are plenty of the Seiko’s around as well.
@@watchrepairtutorials Thank you Alex! Me and my family are safe ( as safe as it possible to be during the war and russian missel attacks). Watchmaking hobby helps to decrease stress - I do things I like to. Your lessons helps beginners like me to do watches service proper way. I’m sure I will avoid many mistakes I had done before at my next project )
Thanks Alex - love your tutorials. I have just decided to start watch restoration as a hobby and am awaiting delivery of my first round of tool purchases. This tutorial has been very informative. I would be interested in your opinion about having go at restoring a clock (I know they are quite different, but I wonder if the size might make it a bit easier to get used to the tools and process)? Many thanks, Kip (Australia)
Clocks are very interesting but you will have to be set up for making and installing bushings. Thats the number one repair. Tools are totally different as well.
Hey Alex! I can't thank you enough for all of the great educational videos you've produced. They are soooo helpful. And you pack in more useful information per minute than anyone else on TH-cam! So well done... And an enthusiastic "yes please" to the microscope and parts sourcing vids. Peace and blessings to you my friend. 😊
Enjoying all the videos! I've jumped into American pocket watches and have taken one apart and put it back together and got it to run. I'm still learning about cleaning and servicing and need to practice that before I'm ready to get into wristwatches. I didn't have any idea about the Seiko NH36 but that's a great tip. I am going to set a goal of assembling one of those and adding it to my collection.
✨✨ Get Your Copy of my eBook, The Secrets for Adjusting Watch Rates ✨✨ ➡➡PDF DOWNLOAD watchrepairtutorials.com/ebook/ ⬅⬅ ➡➡Available on Kindle & Soft Cover @ geni.us/4x8C (Amazon) ✨✨Watchmaking Courses and Training ✨✨ ➡➡ watchrepairtutorials.com/watchmaker-course/ ⬅⬅
Yes, please talk more about your microscope setup ☺️🙏☺️
ปีที่แล้ว +1
I'm 100% sold on improving a nh35 movement to start, and building a watch around it. Fantastic idea for a first project! Thank you very much for making this video!
My first goal is, to Service my 15 Replicas Watch Collection by myself and being able to replace some Parts with better or Genuine ones. Some ETA 2824/2836 Clones, many 7750´s, a Seagul Clumn Row Chrono and one day - maybe - my Chinese Seagull Tourbillion. As a first Step, i might work on the 3 Hands Watches with no Complications, and then move on to the next Step. I was also thinking of buying a cheap Pocket Watch to Practice, because it was suggestet on another channel, reason was, that the parts are bigger. And i also found the Kienzle alfa, it was my 2nd watch as a child, that was sitting in the Drawer for 45 yrs now, but man, this thing is really tiny :)
Hi Tom, In my opinion starting out with a vintage pocket watch is not the way to go. I believe that in order to learn how to troubleshoot and correct problems inherent to vintage watches you first have to have an understanding of how things should work first. The ST36 is what I have always recommended as a first watch to work on, yes because of the size but also because they have the potential to be great runners. Get good at the basic skills and then build off that.
Nice one again Alex sir! If you haven’t guessed, people would like to see a Microscope video lol. I’ve been using mine for the last 7 years and to be honest, I’d rather remove my eyeball with a blunt spoon than work with a loupe the whole day. Loupes are only used now for odd jobs where it’s impractical to use a microscope.
Great video as always. When people found out I was interested in watch repair I ended up with a pile of watches from people. I found that I really enjoy cleaning up and refurbishing the exterior. I have finally ended up with a few mechanicals and cant wait to get into them. But before I do that I may do what you said and get a new working movement ( not just running like the stuff I have) to see how I fair with them. Thank you for these videos and I can't wait for the next one.
Hey Andrew, Some of my favorite watch’s are the ones I have built myself. I already went to the road with high end watches but always felt silly wearing a watch that was 5 figures. I got rid of them all and enjoy building my own, except for some choice Seiko’s and other vintage Swiss I own.
Alex,today I came across this video and found your explanations and down to earth suggestion extremely interesting. I agree that the whole Watch tinkering and repairing for us amateurs is greatly depending on seeing what you are doing. So next tool purchase of mine might be a microscope. Look forward to your advice on such a matter and will start exploring your channel to see if I can find any related video. Keep on doing the great work. P
Hi Alex, I am just getting into watch repair as a hobby. I am interested in vintage watches. I am having difficulty recognizing and returning all the gears, screws and parts to their rightful place once disassembled. Is there a video that identifies what parts to disassemble first in order and to reassemble. I bought de Carle's comprehensive book on watch repair but its very dry. Also, I am looking at AWCC webinar classes. ANy other suggestions as I am unable to take 2 years off to attend school and learn repair properly. Open to all suggestions. thank you and love your videos. Phil
I bought a seiko that seems to run just fine its just got a cracked crystal I got it for 3 dollars at a yard sale I think it's solar because it says solar above the 6 the only repair shop in town wants 80 bucks to replace it so I'm going to do it myself for way cheaper
As someone who has just started getting into working on watches this series has been helpful. I just recently inherited a pocketwatch from my grandfather that was his fathers when he worked on the railroad. I knew it was a Hamilton but I didn't think it would be anything special, beyond sentimental value, but it turned out to be a Hamilton 950, non B so pre war, and was in amazing shape just a little dirty and need of service since it has probably been 50 years since its been touched. Fortunately I have a watchmaker in town, he actually has 30 years of experience and is a Rolex Watchmaster, and he knows I'm trying to get into working on watches and has even given me some tools and told me not to dare work on something like that while I'm still learning. So as soon as I can source a pristine dial I will be taking it to him to be serviced and have it swapped to a display case he has along with the dial I get, mostly because I feel that movement needs to be shown and because I want to keep the original case and dial from any further damage since they have been in the family for about 100 years. Hopefully, before to long I will trust myself to service movements of this caliber, but for now I will happily hand something this important off to someone who will do an amazing job.
Well, that’s a great story and a great watch. Thank you for having the sense to know what your limitation is. For a minute there I thought you were going to tell me that you were gonna start with this one and I was gonna say no please don’t. I’m a huge fan of Hamilton and they’re railroad watches, are very special. I’m glad you’re enjoying the series and hope to see you again here. Alex
😅😅😅It is at this moment I, somewhat, deeply regret not discovering you sooner. Would have saved me $40. Live and learn and advance. Thank you for your honesty. I hope your channel gets a ton more subscribers. You deserve the views.
Alex, Thank you for another outstanding video lesson! I wish I could have seen this as I was first starting out, although I did learn much of this without making any expensive mistakes. This video is filled with must-see info for any aspiring watch repair tech. When I added a dissecting microscope to my bench it was a total game-changer, so a video to teach others about this would be great. A smaller issue I’m grappling with now is the use of the Bergeon automatic oiler, which I bought in a failed attempt to avoid having a disassemble vintage non-shock-protected jewel settings. I broke off the tip trying to fit it into the jewel setting, it seems like it belches oil everywhere, and - most importantly- there’s no point in lubricating a jewel that hasn’t been disassembled and cleaned properly. The instructions for these are no help at all. In any case, your videos have risen to the top of the field - and I say this with the highest respect for the superb videos from Mark, Marshall and others. You are the best! P.S. Beginners need to steer clear of the premium vintage market (Rolex, Omega, etc.) where it’s easy to lose your shirt!
I have auto oilers and never use them. They are adjustable by the screw but I agree they push a lot of oil and those tips are very sensitive to breaking Thanks for everything Paul.
Great summary Alex - I wish I’d heard all this when I was starting out. I’d love to hear your take on microscopes - it will be my next purchase but don’t know where to begin looking or what to look for. Thanks!
Lol man I’ve heard it so many times. I am working on the guide for identifying movements, part numbers and sourcing parts. Microscopes will be after that
Hi Alix, I have just binge watched most of your videos, in the past couple of weeks. I am a British guy living in Mexico who was forced into professional watchmaking not by choice. On an adventure in Mexico Married the owner of a jewelry shop, our watchmaker died of covid so bit of a crash course really. Microscope video please.
So my first project watch was a Timex 4047 3164 with (what I believe) is an M31 movement. Might be M32, but I have exactly 2 weeks of watchmaking experience, so who knows. Bought your 7 tools on Amazon, plus a few other things I saw you using on other videos. Like loupes, sticks, dynamite, etc. I bought a cheap video microscope. Good thing I'm into knives because all it's good for is checking an edge after a sharpening. Oh, and coins. I bought a silicone mat to work on. And one of those loupes that look like eyeglasses with LED lights. Those were pretty good purchases. So I get the Timex and open it up. That went pretty smooth. Until I realize this movement doesn't look anything like what you're doing videos on 🤣. But I press on. Theory is theory and should apply across the board, right? 😉 I'm about halfway through tearing it apart, taking before/after photos of each step, and photographs of the bin in putting the parts in. Then I realize... this thing ain't got no jewels. 😂 So as I'm taking this thing apart, the stem falls out. That's when I notice these 3 little parts laying on the mat. Wasn't sure what to do, so I decide I'm gonna put those back together. While I'm doing that, I bump into the watchmaker side and knock off 4 or 5 gears and I have no idea where they were 😶. Then, as if you were Nostradamus himself, while I was trying to reassemble the stem assembly, I put too much pressure on the brass tweezers and the stem, crown, gear and the two plates it sits between go flying into the atmosphere. 🤣🤣🤣 My wife says, "don't worry, we'll find them.Little she know they're two grains of sand on a beach. I put everything away, grab a beer and turn on the IndyCar race. 😂 I think I spent $30 on the Timex, but the lessons were priceless. And it was a lot of fun. Reminds me of model airplane building when I was a kid. Love your vids. Keep em coming. One question - I was kind of confused on the order I should do things. Dial side vs watchmaker side? How long should you leave the stem in? Things like that. Again, thanks for your great videos. Having a blast.
Well first, I’m a huge race fan, mostly F1 because I know the drivers better but I like Indycar as well. I hope they let Andretti into F1. I would love to see what GM could do there. Don’t get hung up on the disassembly order too much as it really doesn’t matter in most cases. For assembly, start with the keyless works then barrel and train. Then you can get the watch ticking before you do anything else.
@@watchrepairtutorials That pompous primadonna Lewis Hamilton is part of the new ownership group for our Denver Broncos - he didn't make any fans in IndyCar with his comments. I enjoyed Alonso's attempts at the 500 and thought he respected the uniqueness of American open wheel racing. McLaren has brought some great competition to IndyCar. Thanks for the encouragement. The new project is already on its way!
Super useful insight and info. I began a year ago with Seiko stuff. The best bit is, with very little investment you can buy a load of the same movements from eBay. Those watches with the colourful dials that aren’t standard. Also, correct about the NH36 movements, I’ve mentioned that these movements often come with little to no lubrication, and are often not regulated at all. I’ve had quite a few local “modders” tell me I’m wrong. I guess I offended their “business” of making $500-$700 “Fake-o” watches dubbed as “customised” buy buying off the shelf cases, dial, hands and movement from CT and the like. Calling themselves a custom shop for watches. Whoops. Sorry to bring forth the truth. Ha! Another awesome video!!!!
I love this comment. It’s almost like we think alike. The vast majority of modders are don’t know anything about watch service nor have they ever taken a movement apart. Sorry if that offends anyone but it’s true. Same for seagull and Chinese movements as well. They dont know that the lubrication is the responsibility of the end user.
I would love to learn more about sourcing parts, as well as storage concepts/methods. And as has been made clear by other viewers microscopes are going to be fascinating to zoom in on.
It depends on what your goals are. When you jump around from one movement, Manufacturer to the next, you tend to accumulate lots of part watches. I tend to look for manufactures they use ETA. That way if I need a part I am able to go into my large parts supply that are from the same manufacturer, even though the watches are made from many different manufacturers. I do the same thing with pocket watches. I’m a fan of Hamilton so when I buy a pocket watch to work on again, if I need parts, I have a large supply of Hamilton part moments.
Great overview and I think this is very helpful for beginners. I'm both sad that I found it now that I am just through with this whole thing as a try-and-error-phase, but at the same time happy that I did avoid many of the mentioned missteps :) I actually started with Molnija 3602 pocket watches, which are quite "modern", cheap to get if you keep eyes open, still bigger than your typical wrist watch, quite well documented by "the internet". Actually managed to combine four non-runners into two runners, and have them running as little desk watches now. Surely only one possibility, but that worked quite well for me.
@@watchrepairtutorials it’s all about the journey 👍 if we keep an open mind, every step forward shows us many possible new steps, and it’s fun to explore. Videos like yours help so much! I am happy that I’m privileged to spend time on this. Right now, my head is exploding about trying to fix the regulation on a Seiko 5626B with a broken hairspring key… 🤯 no idea how to slide part 341564 (that I got as NOS) over part 344562… 😬
Thank's Alex - very useful insights. I wish I had your knowledge and thoughts a few weeks ago. It would have save me time and money. I am now rethinking my approach to the watchmaking hobby based upon your valuable insights. I too, would love to hear your thoughts on microscope setup and sourcing parts. I bought a used inexpensive Celestron 44340 lcd microscope but it is difficult to use because there is little room to fit movements on the tray and it's minimum magnification (40x) feels too powerful. I look forward to you microscope wisdom.
Do you think a nh35 is a good pick for first watch service like you describe in the later portion of the video? One to attempt to service and then build your own watch out of. This would be my first attempt and wasn’t sure if it was “too much to chew”. Also, thank you very much for these videos. They have been very interesting and have helped me understand questions I didn’t even know I had.
Alex, please help! I'm a new learner, and bought an Elgin wristwatch for my husband's birthday, not running. It was around $30 off eBay, it has a black face, the second hand is not separate, so I'm guessing 1950s, 1960s. I'm not nearly ready to work on it yet so I took it to a watch repair guy at a jewelry store. He says it's not worth repairing, that the case is base metal and can't be replated (he says if a case like that is replated, it will develop leaks and holes). And I'm bummed! It needs cleaned, the balance looks good, and my main goal for getting into watch repair was to resurrect watches, not only uber-expensive watches. What's your opinion?
Hello Laura, Why are you buying vintages watches to repair if you are not ready to repair them. Most watches you buy on eBay for $30 are not going to be worth the restoration cost from a watchmaker. Start learning how to service a running movement, work you way up to successfully serving a working movement so that it works as good or better than when you first started on it, then you are ready to work on a running vintage watch.
So happy to have you along side me as I venture into this world. Your sequence and rationale is so clear it seems obvious but of course it is not. Great tips regarding watches, but even loved the Advanced option in ebay. How come I never found this. Also, selection of the seiko movement, even buying new and establishing that you can improve its performance is just golden. It is the path I am chosing. I bought a Seiko 9612-9000 referred to as the baby grand. Gotta tell you, I fell in love with the time piece when it arrived. Intention is to give this a full service in 6 months. Of course I have a family so this is a matter of can I devote enough time to establishing my work space and learning the needed skills. Is 6 months too hopeful? (very grateful)
Fantastic video Alex. I echo what others have said. Love the new look and additions to your videos with old stock footage etc. Its almost like you are talking directly to me as you answer all of the questions I have in my head. I'd love to see a video on Microscopes. also a video on how to use a staking set, a jeweling Horia tool, tracking down parts (espcially Omega date rings for a 1250 movement :)) and alternative tool options. Meaning what can you get away with on Amazon and what should be high end tools. Just a few ideas off the top of my head.
Well Graham, First thanks for the coffee brother, maybe one day we can share one in person. I have all those videos planned now that I am kinda wrapping up the basics and I move on to more repair related videos.
Hey Alex!!! Thank for the great videos your producing and the knowledge your sharing. The tip with the Seiko NH35 is great! Nice idea to customize your own watch and get a tow in the subject before buying a vintage watch without knowing, if all parts are ok. Keep on going for more videos!
Hi Alex.. Love you channel and I’ve learn a lot!! I build my watch ,, the moment I screw the back, the date adjustment stops turning !!! A few threads and it does not work. I had to file down the plastic adapter. Any advice?
In order for the date mechanism to operate freely after the dial has been put on there has to be some separation between the two, which is usually either built into the plate or a movement ring. It’s possible whatever you file down is causing the problem but it’s hard to say without seeing it.
You've earned my subscription, sir. What is your take on Caliber Corner's Workhorse movement listing? ("what-is-a-workhorse-movement"). How would you rate from "Most Beginner friendly" to least (complexity vs expense vs experience gained by working on it). I take it you prefer the NH35 as the first. But, what would you recommend next, coach? Just curious... VIDEO IDEA? Thanks for your help!
So the best move is to start on with all things considered as the ST 36. Watchmaking school start you off with the ETA 6497 but they run 250-300 US. In my opinion when moving up to a movement with Calendar functions the NH35a is the way to go. They’re not expensive and they can be greatly improved on after service. As a matter fact, I have a video that I’m gonna be doing shortly. We’re all making a bunch of upgrades all day Seiko SNZH and I’m gonna be putting it in a NH 35 in that one among other things.
Thank you. I hope that a solid self-paced apprenticeship can be had with a smartly gradual, reasonably priced selection of e-bay finds and clones. And I’m sure I’m not alone in being willing to spend a few hundred bucks to learn a complicated caliber that’ll expose me to more skills and enjoyment. Great channel!
I'm a university professor with a background in watchmaking (in my first life). I'd like to take two minutes to tell you how well-made your videos are, full of practical advice and common sense. Thank you so much!
Well, thank you very much, Professor. Thank you may be stretching the definition of well-made a bit Although I think they might be getting a little better than the earlier ones.
As a starter watch to repair, I bought the ST36 on eBay for about $30. It was the exact same watch you are using in your lessons. I then followed your tutorials exactly as you instructed. If I got lost along the way, I replayed the video as many times as needed until I got it right. I also bought the case that matches the movement exactly for $30. I added service tools as needed for the “restoration” process. Since it is a new running movement, It didn’t need restoration. It’s a whole lot of fun taking it apart and putting it back together.
That is awesome to hear. It can get addicting
I'm just getting into this and this is my plan too. I wanted some pocket watches to wear, so I got a couple of old Waltham watches. All working but in need of a service. And my plan is to practice on modern, cheap movements until I get good results, and then have a go at the old movements.
That's my plan too. I've got a 9 year old son who interested in learning watch repair. I'm interested too so hopefully a nice hobby we can enjoy together.
Thank you Alex - very useful insights. I would love to see your microscope setup and a video on sourcing parts.
Alex answered your request! Look at his #18.
I'm just proud to have been able to open the case and change the battery on a Pulsar that I've had sitting in a drawer for 40 years. It was a high school graduation gift from my cousins. Once the battery died, I put it aside. Now I can do it myself. YEA. I AM starting to collect a few watches and movements to learn how to do service. I have my grandfathers Hamilton automatic that I'd like to get in to. It'll run for a few seconds and then stop. I figure it's going to be gummed up with old oils or maybe even a tired mainspring. I haven't even figured out how to get the back cover off, so no danger of messing anything up yet.
One thing I’ll tell you if you haven’t heard it yet is that vintage pocket watches can be the most challenging. Good luck
Watching this a second time. In my case, I have a watchmaker friend who trained at Piaget and he gives me watches to fix for free. It's a mutually benefitting situation. I get free advice, parts and watches or clocks to fix and he gets back the finished product. The other day, he made me the ultimate compliment. I fixed two 400-day clocks he was unable to fix for years. Having said this, I'm sure he didn't put in the time to figure them out as he is mainly concerned with expensive wristwatches.
We should all have a friend like that.😀
Thanks for this great video, man! I made my local watchmaker rich by first buying a working vintage watch movement from him, trying to dismantle it and putting the parts back together, I broke the balance spring and went back to him for getting it fixed! He calmed me down by saying it is totally okay to screw up, because that's how you learn!
It is true, as long as you learn from the mistakes and don’t keep making them over and over. It’s part of the cost of learning.🙂
Would love to see video on parts sourcing... I started backwards and have bought several "for parts or repair" watches on auction. (I know, I know...).
Here you go George, th-cam.com/video/viq9-V1sv7M/w-d-xo.html
Your videos are gold man and my standard go to for lessons. I've been concentrating on the Seagul st36, and the Soviet 3602's to begin with. At a flea-market I found a rare Swiss Montandon pocket watch that needs a balance staff. Will send that to a more advanced watchmaker hopefully to make a new one! Thanks again! 💯
I appreciate you brother.
I would love to see the microscope setup and how to go about getting a decent one and set it up
Just dipping my toes in to watch repair/restoration and this was a great help, thanks!
Glad it helped!
@@watchrepairtutorials I'm on lesson 5 so far, it's going to be a late night I can tell.
Great resource, thanks a lot 👍
@@dustaone8521 sorry brother😀
Hi a video showing how to source parts would be great, I have an ST 3600 to practise on and will be getting a NH36A soon
Great plan Andrew. Thanks for weighing in.
Another great video! I would love to see a video on sourcing parts and another on your microscope setup. Thanks for continuing to put out this great content.
Amazing, this is exactly the information I've been looking for. Indeed, I've asked a bunch of TH-cam watch repair folks for exactly the tips you provide in this video. Thank you, thank you, thank you!
Hey buddy,
I got a lot more where that came from. We haven’t even got started yet.
Great Info. I'm starting to acquire the tools to get into the hobby and would appreciate your input on microscopes and the use of digital microscopes (i.e. with a video screen). Thanks.
I've just begun to get involved with watchmaking, as in I've yet to even service a movement yet. Right now, I'm slowly acquiring tools/consumables and bought some old scrap movements to practice on. This answers the questions of what my next step should be and what I should be looking for as my skills progress. Thank you for a very informative video. I'm now subscribed.
Thanks John that’s awesome.
Great lesson, thank you. I tend to gravitate towards mechanical movements rather than quartz.
Yes please for a parts source video!
Thank you so much for your valuable information.
I've taken your advice here and ordered a used watch.
Looking forward to see where it goes from there and hopefully get a feel for it.
ODP,
Take you time and learn the basics then build from there. Patience is a virtue in watch service and repair
This is a really great video. And I hope that I have not made any of the most egregious mistakes. I have my grandfather's watch which was a pre Heuer Leonidas. I took it to a local shop who quoted me $600 to get it running again. I figured I could buy a lot of watch repair equipment for that kind of money so I started doing a little digging. My grandfather's watch has a Felsa 690 movement, which seems to be as common as dirt. They are all over the place and it seems like every part is available from somebody. So I have purchased a small handful of watches and movements for spares with the intention of learning on the cheap eBay watches before I crack the case open on my grandpa's watch. Your series of videos has been the most useful of any I have seen so far and I can't tell you how much I appreciate it.
Thank you so much Mark. Be careful though, it can get addicting.
@@watchrepairtutorials what fun would it be if it wasn't?
Great video. I made a reddit post about this a while back. Great to see this in the collection. Sourcing watch parts is the hardest thing for me. I'd love to see a video on that.
Very very informative Alex. I have loved watching every episode. I am now going to watch all your videos. My evenings, are now sorted. Thank You (UK)
well, my friend I sure appreciate it.
Hopefully this video will save you some money .
Your comment on starting with a modern movement and fitting a case is the route that I took. I bought a couple of Seiko NH36 movements knowing I would probably screw up the first one. Actually, I screwed up the second one too. But on the third one, I was able to take it apart, clean it in Naphtha, rinse in IPA, lubricate it with 8000, took the balance wheel off and reinstalled, and adjusted and regulated the watch - following the instructions in the Seiko Service Manual AND YOUR VIDEOS!. To your point, I was surprised that the movement ran better than new but realized it was probably not lubricated well or regulated from the factory. With the movements, a loupe, a good set of screw drivers, and an Android time app, I got started on a great hobby as I enter retirement for not a lot of money. I recommend your option on this. Didn't want to spend a lot of money until I found out if I had the "right stuff" for this hobby. Probably going to get a good microscope net and brush up on my lubrication skills.
P..S. My wife works at a jewelry store that sells Rolex and they also have a factory trained watchmaker on staff. She noticed how much I'm enjoying this and said I should consider going to the basic watchmaking intro school they send their staff to. I said I watched your videos instead!
Hey John, That's a great story, so thank you for taking the time to spell it out.
I think you made the right moves and now you have a watch to wear that you built, an understanding of the mechanics and at the same time realize that there is a lot more to learn.
Keep Learning my friend.
Wow, so much great information for new watch makers. Stumbled upon your channel researching Epilame. Don't understand why more watch making channels don't cover this practical information. it's so important for successful watch making.
Because you are not going to get millions of views. My mission is to help people
@@watchrepairtutorials Just bought your microscope recommendation with Barlow adapter and LED. I had the AmScope you didn't recommend, purchased years ago for electronics. If you go through EBAY, AmScope currently has multiple discounts, $378 for scope and adapter (not including LED). Should get it in time for my birthday! Thanks again, subscribed and rolling through all of your content...
@@paulsonoda245 that’s awesome Paul
Great advice to somebody like me just starting out, still trying to find the courage to tackle my first practice movement a 6498 clone
My best advice to you would be to take it slow and focus on a particular group of movements. For example, if you’re a Seiko fan Concentrate on Seiko, an ETA fan find a couple movements you like and work on those. When you’re new the last thing you wanna do is jump around all over the place working on 100-year-old pocket watches, then citizen and Seiko and Swiss. Once you gave more experience that you can start branching out.
Brilliant thank you for the advice, its really appreciated. One more question if I may, how did you polish your oiler that was a great tip and makes perfect sense? Happy New Year! @@watchrepairtutorials
@@yesterdayschild1418 sure, fine polishing compound like Dialux green on a hard felt wheel in a rotary tool. 10 to 15 seconds at a time then check it. It doesn’t take much.
Ha! You've been watching me since I started. Now every one knows what I did. - - - . Lots of great information. Well worth watching.
Hey Ross,
How are you today. What do you think parts sourcing or microscope ?
@@watchrepairtutorials yes. Microscope would be a great project. Look forward to seeing it.
Thanks for these great tutorials; the best I've seen. Enough detail and description for a newbie like me to follow. If you haven't done it yet I surely would like to see a tutorial on microscopes that are not too expensive for beginners. If you've already made one please provide the address to access it. Thanks again for the taking the time to produce these fantastic videos.
Here ya go
The One Tool That Will Make You a Better Watchmaker
th-cam.com/video/tAtATqwI5A4/w-d-xo.html
Very helpful information. I would like you ask a question on microscopes. I see the one you have will only allow you to use one eye when using your camera to record. I have found they make microscopes that will allow you to view with both eyes while recording video. They call it simul-focus. This would be a nice subject to talk about.
They do, but most people are not filming everything they do and of course it ups the cost.
Brilliant advice. Just saved me a ton of time and potentially costly mistakes in getting started.
That's why I made the video my friend. Thank you.
thank you for the guide! I bought a NH36 movement from TMI with the intention of taking it apart and practice some oiling but from the factory it was already well regulated (+0.5s a day) and oiled (everything seems smooth eye ball amplitude with slow mode camera on my phone it looks good); didn't have the heart to take it apart, ended up put it in a case with dial and hands and called it a day, the search for a learning movement continues
Wow. A 1/2 a second a day over 5 positions.
Those are chronometer numbers.
Spot on again Alex, i would say sourcing what i need is the most challenging and enjoyment i get from this hobby. i was given a eta7750 in dire need of help, and your advice has been a great help. cheers.
Thanks Billy
Hi, I'm just trying to make my way into the world of watchmaking or shall I say, watch servicing, and am I lucky to have discovered your TH-cam chanel ? The nh36 is definitely the way to go. I'll be back to you soon. All the best from Croatia...
Welcome my friend. It’s good to see you here with use.
Alex, This is great information for someone wanting to get into this craft, especially the subject of pocket watches.
Glad to hear it sir. Appreciate you stopping by to say hello.
Another terrific video, thanks so much Alex! Also, love the increased production quality on the channel! New intro, B-roll footage to support your discussion points, etc. -- it's really coming along nicely. A microscope video would be amazing as well. Always like to get more info on everyone's setups, and I think people should just budget in a microscope from the start. 🙏
Agreed!
A digital microscope camera setup I found to be a must for this 73-year old retiree. It is indispensable for inspecting components, taking a series of pics during a disassembly, and examining my lubrication and assembly results.
My setup consists of a Hayear 48MP 1080P HDMI digital camera with a Monocular Max 180x Zoom C-Mount Glass lens, a bench-mounted stand, and a polarized light source with a circular polarized filter. For viewing, I have a iSmartView 10.1 inch HDMI Monitor with a wall-mounted tablet holder. It opened up a whole new world for me.
@@TropicalSpeed Ray, that’s the ticket. This is valuable and helpful info. People can search for what you are putting in the comment.
Thanks as always.
I made the mistake of trying to repair an M24 Timex pin pallet movement. Maybe when I get better at it I’ll try and put it together again. Lesson learned: Swiss basic movement that’s well known and a lot of them were made.
Yea I agree 100%
Thank you for your high quality, extremely helpful videos!
You're very welcome!
Great down to earth video Alex, really let’s folks to temper their expectations
I don’t want to discourage anyone Tom, but going into it blind is never good.
Agreed sir, I have interacted with quite a few folks now that think that a 30 minute video shows them how to do a pro job and it ain’t hard 😢
Great information Alex. Would love to see a video on the microscope!
I did one. It the game changer video in the basics playlist
I know I've seen one video about microscopes, but yes, I'd definitely like to know more. I was dismayed to discover a watch I just got off eBay in "non working" order (the seller was honest) turned out to be... completely hosed hairspring. I'm trying to source another movement for parts, but everything I've found is going for more than what I paid for this one, and appear to be "working".
And that’s exactly why I made this video. 😊
Thank you so much for these videos. I really love watches and am toying with the idea of getting into the hobby of servicing personal watches for fun.
Hey Christopher, I’m glad you like them. These beginning videos were made for guys just like you. Let me know if you have any questions.
I bought a Tevise diver watch for $17 to practice on. Thanks for the tips. Great video BTW.
Alex I have been in the market for a stereo microscope for a while now..... talk about damn a rabbit hole. Please do a video on your setup please.
Great episode, i can speak to experience that buying a watch in 35mm to practice on was a mistake, now that i have a little more experience I've bought a donor movement for my king Seiko a well a GSTP pocket watch to work on. But if anyone needs HMT parts, i have two of them fully dissasembled with one small spring missing from each 😂
Where did it go, well I just learned why working in a room with carpet is a bad idea.
BTW, I serviced my first Swiss quartz movement for my son in law. It felt really good to have someone i know just being me a watch and ask if i could fix it. Had to order a battery and a pin for his bracelet. But got it working and even though it's an easy job, it sure felt good to have my first happy customer.
Nice job Eric, I have some videos coming up in the future.
Just subscribed and I would have liked hearing those words before buying 20 vintage watches for my first reparations.... Let's see, but for sure the sourcing video would be great..
Yes, I have heard that a few times. Hopefully this will help some in the future. Glad to have you here with us Salvatore.
Many useful tips again. Big thanks.
Realized that i was not far off when i bought two Seiko 7009 movments to sharpen my skills on. Cheap and many parts on Ebay. Hopefully there will be one working watch at the end of it.
They can be a little fussy at times that’s for sure
@@watchrepairtutorials So i noticed. And to top it off i just broke the tip of the mainspring tryning out my new winding tool. Fuck it, time for a beer. Cheers to you and have a nice weekend!
God how I wish you had been around a year ago when I started this journey... your videos should be required viewing for anybody who has been mesmerized by any of the channels that make this look oh-so-easy, before they ever buy a loupe and pick up a screwdriver!
LOL. I run into those people daily. The entertainment channel are good and bad. One one hand, they get people interested in horology in one way or the other. One the other hand that drives up prices on available watches and part availability not to mention all the watches that get recycled back into eBay that have been butchered.
Thanks man, see you again
Another greatly informative video: this is exactly the info an enthusiast but very amateur watch-repairer like me needs. Thanks!
Hopefully it’ll save you some aggravation and maybe some money
@@watchrepairtutorials it definitely will; thanks. The idea of getting a new NH35 to begin with is awesome, I'll do that; at least I know it should be running after my service. I've been struggling with a vintage 7009a; and it didn't end very well...
Hi Alex,
Again more excellent videos, and highlighting the mistakes l've already done,
I'm just waiting on my amscope to come, my mainspring handle and 3 winders,.
Your sourcing of watch parts was very helpful and its nice to gain this knowledge, l think you're the only watchmaker that provides this type of information,.
Also the ebay buying l bought 2 nice seiko's that l like quartz just to wear not to work on, and l've found that although they work fine, the crown and stem seem to pull out of the watch with ease, so as you say ebay sellers, don't know what they are selling,.
Looking forward to your next video,.
Hello Eddie,
Hey man mistakes are just part of the game no matter how diligent you try to be.
Thanks for joining us.
Thanks for another excellent video. As a beginner, the suggestion of starting with a modern/current movement strikes me as a great strategy to start out. A discussion of microscopes would be super.
Thanks man. You got it
@@watchrepairtutorials Thinking about the new movement approach a little more -I suppose that it also allows learning the disassembly/reassembly without necessarily opening the mainspring barrel -assuming that the "brand new" barrel assembly will be OK? This would delay the purchase the mainspring winder until it is "needed". I appreciate the critical importance of the mainspring and servicing the barrel/replacing the mainspring but this could be delayed until further along in the learning cure. Is my reasoning OK?
@@littleviking488 well that is a side benefit for sure. I mean the barrel and mainspring hasn’t really even had time to arrest him out so it should be good and not require you getting in there.
Probably the most important reasons are familiarizing yourself visually, visually with correct end and side shake of the barrel and wheel pivots along with the pallet fork.
Like I talked about in previous videos, if you don’t know what it SHOULD look like how do you know when it’s to much and needs adjusting.
It gives you the opportunity to study what everything looks like when it’s correct.
Watch how the hairspring breathes, what a proper terminal curve looks like, what free-running of the power train looks like.
If you study a movement that is working correctly then it makes it wayyyyy easier to spot something when it’s not.
@@watchrepairtutorials That makes perfect sense -as you've pointed out in your previous videos. Kind of a "base line" of how things should be so that gross variances in other movements become obvious.
sound advice. I found a perfect movement and dial for an old gruen and never found a case to fit it. just sits in the drawer but might be a good candidate for servicing practice.
It happens to us all brother
Thanks Alex, this particular video reallyhelpedme a lot. Also - Yes, please do a video on microscopes, if you haven't already. Have a great day.
-David
Ha, I just got to the video on microscopes. Thanks. -David
I did. It’s the game changer video.
Greetings! Thank you for your amazing videos while I have a question - do forgive me as I'm very new to this.
At 2:16 you mention that the "dimension between the top of the dial and the centre of the stem have to be the same in the movement as well as the case", can you expand on the reasoning of that? Or better, what will happen if this requirement is not met? Thank you in advance!
Sure. To be more correct the measurement with the dial on the movement to the center of the stem needs to be the same distance inside the case from where the dial sits to the center of the case tube that's a stem comes out of.
If it's not, then the stem will either rub on the side of the case tube, causing wear and/or bending the stem. In the case of a stem with a crown that screws down or inserts inside the tube it will either not fit or put a great deal of strain on the stem interfering with the way the keyless works functions.
This is the dilemma that people trying to find a case for a loose movement run into.
A watch case is made for a specific movement so trying to retrofit a different movement inside a case is very difficult at best requires much trial and error .
Does that answer your question?
@@watchrepairtutorials Thank you for the prompt response. Let me try to rephrase your words to confirm my understanding - essentially the entry point of the stem needs to be level all along to the end point of the stem in the movement, otherwise the stem will be askew, possibly damaging the stem or affecting the keyless works functions?
@@mchoxdbs right. And it needs to be centered in the case tube. We are talking about 10's of a mm, so very small tolerances.
@@watchrepairtutorials Perfect. Thank you and greetings far away from Hong Kong!
@@mchoxdbs wow, thanks my friend.
How about a video on your shop layout, tools you use and have?
I'll put it on the list
@@watchrepairtutorials………Thank You.
Very very detail explanation. By the way, nice hair. Does it help to be good watchmaker? If it is the case, please have a session on hair maintenance and care.
Thank you Alex! I totally agree with all your advices, because I’ve done this way by myself this year. Cases - the great advice! I like stainless steel cases - it’s easy to return them in a good shape. I started to gain skills using 198-1990 USSR watches - we have a lot of them in Ukraine. And they are extremely cheap ( 1-10 dollars). Then I raised the bar - and next level is Orient watches with 46941 , 46943 movements and Seiko 70XX. Next level need more investments. The time hasnt come … yet )
Hello YT. I hope you are well and safe my friend. It sounds like your skills are progressing well enough. There are plenty of the Seiko’s around as well.
@@watchrepairtutorials Thank you Alex! Me and my family are safe ( as safe as it possible to be during the war and russian missel attacks). Watchmaking hobby helps to decrease stress - I do things I like to. Your lessons helps beginners like me to do watches service proper way. I’m sure I will avoid many mistakes I had done before at my next project )
Thanks Alex - love your tutorials. I have just decided to start watch restoration as a hobby and am awaiting delivery of my first round of tool purchases. This tutorial has been very informative. I would be interested in your opinion about having go at restoring a clock (I know they are quite different, but I wonder if the size might make it a bit easier to get used to the tools and process)? Many thanks, Kip (Australia)
Clocks are very interesting but you will have to be set up for making and installing bushings. Thats the number one repair. Tools are totally different as well.
Hey Alex! I can't thank you enough for all of the great educational videos you've produced. They are soooo helpful. And you pack in more useful information per minute than anyone else on TH-cam! So well done... And an enthusiastic "yes please" to the microscope and parts sourcing vids. Peace and blessings to you my friend. 😊
You got.
Thanks my friend
Enjoying all the videos! I've jumped into American pocket watches and have taken one apart and put it back together and got it to run. I'm still learning about cleaning and servicing and need to practice that before I'm ready to get into wristwatches. I didn't have any idea about the Seiko NH36 but that's a great tip. I am going to set a goal of assembling one of those and adding it to my collection.
Sounds like a plan Mike. Let me know if I can help you in any way.
Yet another very interesting video containing information not found elsewhere. Would love to get more info/advice on microscopes . Thank you Alex !
There’s enough interest so I’ll be doing it after the part sourcing video
Thoughts on soviet watches ?
I’ve owned a few. Not my thing really but plenty of people love them.
very useful video, thank you!
hopefully this will help you in your buying process. Just a couple things to think about right?
Your willingness to share your knowledge is most appreciated.
My pleasure. Keep watching, there are plenty of gold nuggets of information in these videos.
✨✨ Get Your Copy of my eBook, The Secrets for Adjusting Watch Rates ✨✨
➡➡PDF DOWNLOAD watchrepairtutorials.com/ebook/ ⬅⬅
➡➡Available on Kindle & Soft Cover @ geni.us/4x8C (Amazon)
✨✨Watchmaking Courses and Training ✨✨
➡➡ watchrepairtutorials.com/watchmaker-course/ ⬅⬅
Yes, please talk more about your microscope setup ☺️🙏☺️
I'm 100% sold on improving a nh35 movement to start, and building a watch around it. Fantastic idea for a first project!
Thank you very much for making this video!
Wow that’s exciting. I love taking a new movement and making it better than factory. Let me know if you need anything. Alex
I'm thinking of going this way as well. Lots of cheap NH movement watches out there that I can take apart, clean and lube.
My first goal is, to Service my 15 Replicas Watch Collection by myself and being able to replace some Parts with better or Genuine ones. Some ETA 2824/2836 Clones, many 7750´s, a Seagul Clumn Row Chrono and one day - maybe - my Chinese Seagull Tourbillion. As a first Step, i might work on the 3 Hands Watches with no Complications, and then move on to the next Step.
I was also thinking of buying a cheap Pocket Watch to Practice, because it was suggestet on another channel, reason was, that the parts are bigger. And i also found the Kienzle alfa, it was my 2nd watch as a child, that was sitting in the Drawer for 45 yrs now, but man, this thing is really tiny :)
Hi Tom,
In my opinion starting out with a vintage pocket watch is not the way to go.
I believe that in order to learn how to troubleshoot and correct problems inherent to vintage watches you first have to have an understanding of how things should work first.
The ST36 is what I have always recommended as a first watch to work on, yes because of the size but also because they have the potential to be great runners.
Get good at the basic skills and then build off that.
Another very helpful video - many thanks. The watch you're wearing in this one kept catching my eye - wondered what it is?
Oh yea that’s a Seiko 7S36-04N0 SNZH55. Good little watch for sure
Nice one again Alex sir! If you haven’t guessed, people would like to see a Microscope video lol. I’ve been using mine for the last 7 years and to be honest, I’d rather remove my eyeball with a blunt spoon than work with a loupe the whole day. Loupes are only used now for odd jobs where it’s impractical to use a microscope.
Yea sir,
Anything I need to look at horizontally I still use a loupe, Jeweling, staking work, crystals etc
Great video as always. When people found out I was interested in watch repair I ended up with a pile of watches from people. I found that I really enjoy cleaning up and refurbishing the exterior. I have finally ended up with a few mechanicals and cant wait to get into them. But before I do that I may do what you said and get a new working movement ( not just running like the stuff I have) to see how I fair with them. Thank you for these videos and I can't wait for the next one.
Hey Andrew,
Some of my favorite watch’s are the ones I have built myself.
I already went to the road with high end watches but always felt silly wearing a watch that was 5 figures.
I got rid of them all and enjoy building my own, except for some choice Seiko’s and other vintage Swiss I own.
Alex,today I came across this video and found your explanations and down to earth suggestion extremely interesting. I agree that the whole Watch tinkering and repairing for us amateurs is greatly depending on seeing what you are doing. So next tool purchase of mine might be a microscope. Look forward to your advice on such a matter and will start exploring your channel to see if I can find any related video. Keep on doing the great work. P
I did a video on my microscope set up
Very insightful and great advice. I take the point regards starting with a Seiko NH35, thank you.
Glad it was helpful my friend. Thank you.
Hi Alex, I am just getting into watch repair as a hobby. I am interested in vintage watches. I am having difficulty recognizing and returning all the gears, screws and parts to their rightful place once disassembled. Is there a video that identifies what parts to disassemble first in order and to reassemble. I bought de Carle's comprehensive book on watch repair but its very dry. Also, I am looking at AWCC webinar classes. ANy other suggestions as I am unable to take 2 years off to attend school and learn repair properly. Open to all suggestions. thank you and love your videos. Phil
Yea, take my course. You don’t have to go anywhere.
I bought a seiko that seems to run just fine its just got a cracked crystal I got it for 3 dollars at a yard sale I think it's solar because it says solar above the 6 the only repair shop in town wants 80 bucks to replace it so I'm going to do it myself for way cheaper
Good luck bro
Part sourcing video would be great
Like this one?
The Ultimate Guide for Identifying and Sourcing Watch Parts.
th-cam.com/video/viq9-V1sv7M/w-d-xo.html
There should be a special prize for people like you. Thanks for the wonderful videos.
I’m happy to share the information most don’t bother with.
As someone who has just started getting into working on watches this series has been helpful. I just recently inherited a pocketwatch from my grandfather that was his fathers when he worked on the railroad. I knew it was a Hamilton but I didn't think it would be anything special, beyond sentimental value, but it turned out to be a Hamilton 950, non B so pre war, and was in amazing shape just a little dirty and need of service since it has probably been 50 years since its been touched. Fortunately I have a watchmaker in town, he actually has 30 years of experience and is a Rolex Watchmaster, and he knows I'm trying to get into working on watches and has even given me some tools and told me not to dare work on something like that while I'm still learning. So as soon as I can source a pristine dial I will be taking it to him to be serviced and have it swapped to a display case he has along with the dial I get, mostly because I feel that movement needs to be shown and because I want to keep the original case and dial from any further damage since they have been in the family for about 100 years. Hopefully, before to long I will trust myself to service movements of this caliber, but for now I will happily hand something this important off to someone who will do an amazing job.
Well, that’s a great story and a great watch. Thank you for having the sense to know what your limitation is. For a minute there I thought you were going to tell me that you were gonna start with this one and I was gonna say no please don’t. I’m a huge fan of Hamilton and they’re railroad watches, are very special. I’m glad you’re enjoying the series and hope to see you again here.
Alex
😅😅😅It is at this moment I, somewhat, deeply regret not discovering you sooner. Would have saved me $40. Live and learn and advance. Thank you for your honesty. I hope your channel gets a ton more subscribers. You deserve the views.
These videos have never been intended to get huge numbers. I cant believe I have 5k subscribers,
Alex, Thank you for another outstanding video lesson! I wish I could have seen this as I was first starting out, although I did learn much of this without making any expensive mistakes. This video is filled with must-see info for any aspiring watch repair tech. When I added a dissecting microscope to my bench it was a total game-changer, so a video to teach others about this would be great. A smaller issue I’m grappling with now is the use of the Bergeon automatic oiler, which I bought in a failed attempt to avoid having a disassemble vintage non-shock-protected jewel settings. I broke off the tip trying to fit it into the jewel setting, it seems like it belches oil everywhere, and - most importantly- there’s no point in lubricating a jewel that hasn’t been disassembled and cleaned properly. The instructions for these are no help at all.
In any case, your videos have risen to the top of the field - and I say this with the highest respect for the superb videos from Mark, Marshall and others. You are the best!
P.S. Beginners need to steer clear of the premium vintage market (Rolex, Omega, etc.) where it’s easy to lose your shirt!
I have auto oilers and never use them.
They are adjustable by the screw but I agree they push a lot of oil and those tips are very sensitive to breaking
Thanks for everything Paul.
Well done again I have to agree about microscopes, it made watch repairing possible when I started down this rabbit hole of a hobby at 70 years old.
Wow Chris, glad to have some of my older brothers joining me.
It just goes to show you, you are never to old. How long have you been at it ?
@@watchrepairtutorials Hi, only 5 years and still spending on and making tools.
@@chrisvincent6138 A never-ending persuit
Great summary Alex - I wish I’d heard all this when I was starting out. I’d love to hear your take on microscopes - it will be my next purchase but don’t know where to begin looking or what to look for. Thanks!
Lol man I’ve heard it so many times.
I am working on the guide for identifying movements, part numbers and sourcing parts. Microscopes will be after that
Hi Alix, I have just binge watched most of your videos, in the past couple of weeks. I am a British guy living in Mexico who was forced into professional watchmaking not by choice. On an adventure in Mexico Married the owner of a jewelry shop, our watchmaker died of covid so bit of a crash course really. Microscope video please.
Geez what a story. It’s coming up.
Thank you, Looking forward to it.
Another great video. So helpful.
Hope it was helpful!
So my first project watch was a Timex 4047 3164 with (what I believe) is an M31 movement. Might be M32, but I have exactly 2 weeks of watchmaking experience, so who knows.
Bought your 7 tools on Amazon, plus a few other things I saw you using on other videos. Like loupes, sticks, dynamite, etc. I bought a cheap video microscope. Good thing I'm into knives because all it's good for is checking an edge after a sharpening. Oh, and coins.
I bought a silicone mat to work on. And one of those loupes that look like eyeglasses with LED lights. Those were pretty good purchases.
So I get the Timex and open it up. That went pretty smooth. Until I realize this movement doesn't look anything like what you're doing videos on 🤣.
But I press on. Theory is theory and should apply across the board, right? 😉
I'm about halfway through tearing it apart, taking before/after photos of each step, and photographs of the bin in putting the parts in. Then I realize... this thing ain't got no jewels. 😂
So as I'm taking this thing apart, the stem falls out. That's when I notice these 3 little parts laying on the mat. Wasn't sure what to do, so I decide I'm gonna put those back together. While I'm doing that, I bump into the watchmaker side and knock off 4 or 5 gears and I have no idea where they were 😶.
Then, as if you were Nostradamus himself, while I was trying to reassemble the stem assembly, I put too much pressure on the brass tweezers and the stem, crown, gear and the two plates it sits between go flying into the atmosphere. 🤣🤣🤣 My wife says, "don't worry, we'll find them.Little she know they're two grains of sand on a beach.
I put everything away, grab a beer and turn on the IndyCar race. 😂
I think I spent $30 on the Timex, but the lessons were priceless. And it was a lot of fun. Reminds me of model airplane building when I was a kid.
Love your vids. Keep em coming.
One question - I was kind of confused on the order I should do things. Dial side vs watchmaker side? How long should you leave the stem in? Things like that.
Again, thanks for your great videos. Having a blast.
Well first, I’m a huge race fan, mostly F1 because I know the drivers better but I like Indycar as well. I hope they let Andretti into F1. I would love to see what GM could do there.
Don’t get hung up on the disassembly order too much as it really doesn’t matter in most cases.
For assembly, start with the keyless works then barrel and train. Then you can get the watch ticking before you do anything else.
@@watchrepairtutorials That pompous primadonna Lewis Hamilton is part of the new ownership group for our Denver Broncos - he didn't make any fans in IndyCar with his comments. I enjoyed Alonso's attempts at the 500 and thought he respected the uniqueness of American open wheel racing. McLaren has brought some great competition to IndyCar.
Thanks for the encouragement. The new project is already on its way!
@@chrisbray3236 We will have to talk about this more
Alex, Thank you for another outstanding video lesson!
I wish I watched some of your videos few months back 😊 please keep going
Super useful insight and info. I began a year ago with Seiko stuff. The best bit is, with very little investment you can buy a load of the same movements from eBay. Those watches with the colourful dials that aren’t standard.
Also, correct about the NH36 movements, I’ve mentioned that these movements often come with little to no lubrication, and are often not regulated at all. I’ve had quite a few local “modders” tell me I’m wrong. I guess I offended their “business” of making $500-$700 “Fake-o” watches dubbed as “customised” buy buying off the shelf cases, dial, hands and movement from CT and the like. Calling themselves a custom shop for watches. Whoops. Sorry to bring forth the truth. Ha!
Another awesome video!!!!
I love this comment. It’s almost like we think alike.
The vast majority of modders are don’t know anything about watch service nor have they ever taken a movement apart. Sorry if that offends anyone but it’s true.
Same for seagull and Chinese movements as well.
They dont know that the lubrication is the responsibility of the end user.
I also would love to see your microscope setup and information
I am working on it as we speak
Thank you and looking forward to it
I would love to learn more about sourcing parts, as well as storage concepts/methods. And as has been made clear by other viewers microscopes are going to be fascinating to zoom in on.
Yea man. Storage and organization. You got it.
Awesome advice. I've been learning on the fhf96 types, cheap and plentiful. Will move up to Seiko soon. What about citizen? I see plenty for sale...
It depends on what your goals are. When you jump around from one movement, Manufacturer to the next, you tend to accumulate lots of part watches.
I tend to look for manufactures they use ETA. That way if I need a part I am able to go into my large parts supply that are from the same manufacturer, even though the watches are made from many different manufacturers.
I do the same thing with pocket watches. I’m a fan of Hamilton so when I buy a pocket watch to work on again, if I need parts, I have a large supply of Hamilton part moments.
@@watchrepairtutorials yeh, makes sense. Thanks for the reply, and the lessons. What a bit of fun watchmaking is! Much love from Sydney Australia
Great overview and I think this is very helpful for beginners. I'm both sad that I found it now that I am just through with this whole thing as a try-and-error-phase, but at the same time happy that I did avoid many of the mentioned missteps :)
I actually started with Molnija 3602 pocket watches, which are quite "modern", cheap to get if you keep eyes open, still bigger than your typical wrist watch, quite well documented by "the internet". Actually managed to combine four non-runners into two runners, and have them running as little desk watches now. Surely only one possibility, but that worked quite well for me.
Here’s my question to you. Did you enjoy it? If you enjoyed it, that’s all that matters right?
Alex
@@watchrepairtutorials it’s all about the journey 👍 if we keep an open mind, every step forward shows us many possible new steps, and it’s fun to explore. Videos like yours help so much!
I am happy that I’m privileged to spend time on this. Right now, my head is exploding about trying to fix the regulation on a Seiko 5626B with a broken hairspring key… 🤯 no idea how to slide part 341564 (that I got as NOS) over part 344562… 😬
Thank's Alex - very useful insights. I wish I had your knowledge and thoughts a few weeks ago. It would have save me time and money. I am now rethinking my approach to the watchmaking hobby based upon your valuable insights. I too, would love to hear your thoughts on microscope setup and sourcing parts. I bought a used inexpensive Celestron 44340 lcd microscope but it is difficult to use because there is little room to fit movements on the tray and it's minimum magnification (40x) feels too powerful. I look forward to you microscope wisdom.
You got it man. It’s coming up soon
Do you think a nh35 is a good pick for first watch service like you describe in the later portion of the video? One to attempt to service and then build your own watch out of. This would be my first attempt and wasn’t sure if it was “too much to chew”. Also, thank you very much for these videos. They have been very interesting and have helped me understand questions I didn’t even know I had.
Sure, it's a good automatic to start on. Take lots of disassembly pictures.
Alex, please help! I'm a new learner, and bought an Elgin wristwatch for my husband's birthday, not running. It was around $30 off eBay, it has a black face, the second hand is not separate, so I'm guessing 1950s, 1960s. I'm not nearly ready to work on it yet so I took it to a watch repair guy at a jewelry store. He says it's not worth repairing, that the case is base metal and can't be replated (he says if a case like that is replated, it will develop leaks and holes). And I'm bummed! It needs cleaned, the balance looks good, and my main goal for getting into watch repair was to resurrect watches, not only uber-expensive watches. What's your opinion?
Hello Laura,
Why are you buying vintages watches to repair if you are not ready to repair them. Most watches you buy on eBay for $30 are not going to be worth the restoration cost from a watchmaker. Start learning how to service a running movement, work you way up to successfully serving a working movement so that it works as good or better than when you first started on it, then you are ready to work on a running vintage watch.
Thanks again Alex!
So happy to have you along side me as I venture into this world. Your sequence and rationale is so clear it seems obvious but of course it is not. Great tips regarding watches, but even loved the Advanced option in ebay. How come I never found this. Also, selection of the seiko movement, even buying new and establishing that you can improve its performance is just golden. It is the path I am chosing. I bought a Seiko 9612-9000 referred to as the baby grand. Gotta tell you, I fell in love with the time piece when it arrived. Intention is to give this a full service in 6 months. Of course I have a family so this is a matter of can I devote enough time to establishing my work space and learning the needed skills. Is 6 months too hopeful? (very grateful)
Great story. Keep me updated with your progress. OK?
@@watchrepairtutorials little error, 6216-9000 Seikomatic, lets hope my skills are better than my memory
Fantastic video Alex. I echo what others have said. Love the new look and additions to your videos with old stock footage etc. Its almost like you are talking directly to me as you answer all of the questions I have in my head. I'd love to see a video on Microscopes. also a video on how to use a staking set, a jeweling Horia tool, tracking down parts (espcially Omega date rings for a 1250 movement :)) and alternative tool options. Meaning what can you get away with on Amazon and what should be high end tools. Just a few ideas off the top of my head.
Well Graham,
First thanks for the coffee brother, maybe one day we can share one in person.
I have all those videos planned now that I am kinda wrapping up the basics and I move on to more repair related videos.
Hey Alex!!! Thank for the great videos your producing and the knowledge your sharing.
The tip with the Seiko NH35 is great! Nice idea to customize your own watch and get a tow in the subject before buying a vintage watch without knowing, if all parts are ok.
Keep on going for more videos!
Hey ya Dennis,
Thanks brother.
Hi Alex..
Love you channel and I’ve learn a lot!!
I build my watch ,, the moment I screw the back, the date adjustment stops turning !!! A few threads and it does not work. I had to file down the plastic adapter.
Any advice?
In order for the date mechanism to operate freely after the dial has been put on there has to be some separation between the two, which is usually either built into the plate or a movement ring. It’s possible whatever you file down is causing the problem but it’s hard to say without seeing it.
Oh no. Only have 200 year old pocket watches :) But well, its good learning. Thank you for another great vid that I should have watched long ago
I’d love it if you put up a buyer guide for equipment! The affiliate links would help you too!
You've earned my subscription, sir. What is your take on Caliber Corner's Workhorse movement listing? ("what-is-a-workhorse-movement"). How would you rate from "Most Beginner friendly" to least (complexity vs expense vs experience gained by working on it). I take it you prefer the NH35 as the first. But, what would you recommend next, coach? Just curious... VIDEO IDEA? Thanks for your help!
So the best move is to start on with all things considered as the ST 36. Watchmaking school start you off with the ETA 6497 but they run 250-300 US.
In my opinion when moving up to a movement with Calendar functions the NH35a is the way to go. They’re not expensive and they can be greatly improved on after service. As a matter fact, I have a video that I’m gonna be doing shortly. We’re all making a bunch of upgrades all day Seiko SNZH and I’m gonna be putting it in a NH 35 in that one among other things.
Thank you. I hope that a solid self-paced apprenticeship can be had with a smartly gradual, reasonably priced selection of e-bay finds and clones. And I’m sure I’m not alone in being willing to spend a few hundred bucks to learn a complicated caliber that’ll expose me to more skills and enjoyment. Great channel!
@@ardz8279 well, you should consider signing up for one of my courses one day. Follow the link in the description for more information.