I love your channel because your videos doesn't have any music. The low edition, the quietness, the simplicity of just showing the truck and the inspection it's just perfect. Most channels when grow up start adding a bunch of intros, edition, music, bad jokes, etc., and I don't really like it. New subscriber.
New to your channel I'm a lifetime Dodge boy and after seeing you and your dad playing with the old first gen brought back some good memories of my dad and me wrenching on his old 74 witch has bin left to me after his passing .I have started on the journey of bringing it back from the dead after sitting since 1991 he started rebuilding it and I plan to finish his old truck and drive the wheels off it
New subsciber here and owner of a 97 one ton Cummins dually 4×4 that has been sitting for ten or more years. I look forward to seeing your project come together.
I retired from a Cummins distributor in 2011. I have no idea how many hundreds of Industrial B-Series Cummins I sold. Those things are bullet proof no matter the application.
I feel your pain on breaking that grill. I had to do something similar on a 1985 D150. Cable broke and had to get in. Lucky for me when I got the end of the broken cable the latch still worked.
As a fellow owner of two 1st gen Cummins trucks on the farm, I'm really looking foward to the project you have planned for the engine and tranny. One of mine is very rusty but the motor still runs like a top so I'm going to put it in something else soon.
I drilled a hole in the hood with a step bit, then welded and patched the whole just to save a grill on an old dodge I had. I understand why you did what you did, but this dodge grill I had would not be as easy to replace. 1970 Dodge D100.
I have a 1993 D350 dually was handed down to me by my adopted dad still has original engine and transmission and even the paint still glossy black and silver with its clear coat used to sit on the showroom floor at dodge and cambells till adopted dad bought it off them so seeing another older dually makes me happy I have so far only seen two others in my lifetime so far besides this video 🤣💙
This video popped up in my feed this morning. Also searched you out on Instagram and followed there as well. Looking forward to seeing how this one turns out.
Bro get you a piece of plywood or a Bible or something don't use a rag it's going to suck it right into the turbo give that thing I shot a PB Blaster or WD-40 or something into that Turbo she is so dry in there
You gotta be careful with that can of ether man. These engines can knock themselves to death doing what you did. You skipped so many steps and might of cost you a valve seat, pump ring, or bearing.
I love your channel because your videos doesn't have any music. The low edition, the quietness, the simplicity of just showing the truck and the inspection it's just perfect. Most channels when grow up start adding a bunch of intros, edition, music, bad jokes, etc., and I don't really like it. New subscriber.
New to your channel I'm a lifetime Dodge boy and after seeing you and your dad playing with the old first gen brought back some good memories of my dad and me wrenching on his old 74 witch has bin left to me after his passing .I have started on the journey of bringing it back from the dead after sitting since 1991 he started rebuilding it and I plan to finish his old truck and drive the wheels off it
Your pops is so supportive. Love it
"I think you did good, son." Those words are so powerful
New subsciber here and owner of a 97 one ton Cummins dually 4×4 that has been sitting for ten or more years. I look forward to seeing your project come together.
I retired from a Cummins distributor in 2011. I have no idea how many hundreds of Industrial B-Series Cummins I sold. Those things are bullet proof no matter the application.
i kid you not i tried to buy that truck
You’re kidding!
@greyclough1031 I have a sneaking suspicion that he, in fact might not be kidding but it's just a hunch
I feel your pain on breaking that grill. I had to do something similar on a 1985 D150. Cable broke and had to get in. Lucky for me when I got the end of the broken cable the latch still worked.
As a fellow owner of two 1st gen Cummins trucks on the farm, I'm really looking foward to the project you have planned for the engine and tranny. One of mine is very rusty but the motor still runs like a top so I'm going to put it in something else soon.
In crust we trust my friend
As a fan of the Cummins, nice rig. ❤
Well up here in Wisconsin boss we use zip tie cross stitches to put our plastic parts back together
I drilled a hole in the hood with a step bit, then welded and patched the whole just to save a grill on an old dodge I had. I understand why you did what you did, but this dodge grill I had would not be as easy to replace. 1970 Dodge D100.
You said in the beginning the hood has a lot of rust in the middle,that would have made me cut a hole in it 🤣🤣🤣
sweet, look forward to watching more on this build, good luck from the UK
That ecu is repairable!!!! Don’t get rid of it they are very expensive and hard to find!!
I have a 1993 D350 dually was handed down to me by my adopted dad still has original engine and transmission and even the paint still glossy black and silver with its clear coat used to sit on the showroom floor at dodge and cambells till adopted dad bought it off them so seeing another older dually makes me happy I have so far only seen two others in my lifetime so far besides this video 🤣💙
The magic smoke escaped
Great video, really admire your perseverance 👍
This video popped up in my feed this morning. Also searched you out on Instagram and followed there as well. Looking forward to seeing how this one turns out.
Looking forward to seeing more
That rust is crazy! I live in Buffalo and i dont even see rust that bad up here from the salt!
I kept thinking the truck must've been in a fllood and then you said florida and I was like yep he got himself a water damaged truck
That truck spent more time north than it did in Florida unless it was parked in the Gulf
You don’t need salt to make rust, just need bare/scratched metal and moisture/air which parking in a yard that retains moisture will do.
There salt in the ocean & the gulf btw, which Florida is surrounded by.
i like this channel nice work!
Love your videos your so laid back I’m high on Mary Jane laid back and happy
Same brody...🤪😵💫🥴
On the 2nd gens you can use a long flat screw driver and bump the lock on front of hood I locked my keys under hoods that how I know
Fun fact: the second gen rams had drum rear brakes aswell
lol us boys in new york dont let our trucks sit we fix em and run em
We use a good penetrating oil like fluid film it even bubbles like peroxide on a cut
Nice job.
Clean up the 93 Ram D350 1st Gen 12V Cummins Turbo Diesel Dually New Flatbed on your Truck Stewarts Garage Do mod to it man
We put anti-seize on everything we can here in the rust belt.
Drum brakes where used all the way to 1999 on dodge trucks 2000 it was optional for disc or drum and than 2001 up stock disc
Should have sprayed everything the night before against rust and again in the morning.
Updates please on cab an chassis such beautiful truck
I go with light cream or light tan for base color.
I hope I’m wrong. I’m only a few minutes into the video but I hope he doesn’t destroy that grill. That’s an original grill that you can’t get anymore.
poor girl. cant beleive that rust. Interesting fact: 2500/3500 Rams didnt get rear disc until 2001.5. there were no 1st gens at all with rear disc.
Do you want to sell that passenger seat base - lever release? Thanks!
Great channel
Very interesting 👌
Hell yeah
How can the engine run without the ECU connected?
Just subbed 👍🏼🇨🇦
Hurt my heart when you cut that grill
Imagine if you did all of that work to get the hood open and then it decided not to start
Prob could have used the jumper button ran into the cab and fired it up in gear but could be a bit unsafe if no brakes hahaaha
He must have been hauling fertilizer or something with it
You can buy that Grill from V trucks
The only problem with a Dodge with a Cummins in it is the Dodge parts
In the words of Peg, “what a big pile of Dodge”.
Try lubricant
had drum brakes all the way through the 90s
Dodge wiring problems? No way
It started and u didnt even have to do anything. Almost like a 12valve
Up north there ain't no rust unless if your in Utah from the salt lake
Bro get you a piece of plywood or a Bible or something don't use a rag it's going to suck it right into the turbo give that thing I shot a PB Blaster or WD-40 or something into that Turbo she is so dry in there
Oxidated Wiring
I would of ask around before doing anything you did and saved Money and time
Next time spray WD40 with a hair dryer into then turbo not starting fluid
I've fixed frames worse than that, if you're good with a welder it can be done.
At 8:26 seconds it sounds like he farts
You gotta be careful with that can of ether man. These engines can knock themselves to death doing what you did. You skipped so many steps and might of cost you a valve seat, pump ring, or bearing.
pine tree needles
U can bypass it
He farteddd
I wouldn't touch this rust bucket only for possible parts for another project
Comment
first
That's a second gen first gen ended in 1992
😂😂😂😂
Your wrong bud
Second Gen started in 94
Terrible bait