Hey man my dad’s birthday is coming up and I was wondering if you make a skido complete set because I really wanted to get one for him. I was wondering how much it would be for you to make a complete set with everything
Lol 😂 never showed the limit of the lug height in any of my videos 🤣🤣🤣 glad we’re on the same level with that problem!! Haha and it’s pretty limited because of the stock chassis on around the sprockets
I assembled my tensioner piece a little differently. I put the plastic insert with the hole in first, ran the bolt through and put a lock nut between the insert piece and the main block (where the head of the bolt sits on yours). Works the same and no risk of the insert piece falling out.
Can you please give me the links where i can buy the yamaha toy and the conversion kit🙂.(edit) can you please do a kit vid on the ski doo and the polaris. Ps please put the links where you bought the toy and kit😊
If possible is there a way to get a less steep angle of attack on the front of the track, in real snowmobiles this is very important because you have to dig the snow out of the way rather than just drive over it.
Definitely want wait to get my rc snowmobile set up with one of these kits can't fckn wait cause then I can shred some snow with it and not get stuck as easy. Still gotta get my rc race buggy and truck set up with some electricals as well. Great vid
Use LG HG2 batteries or other high current 18650 and make a replacement for the stock pack for a nice package. If you do, set the lipo cutoff to the lowest level, otherwise it will cut off too fast.
Hey man I bought one of these and it doesn't pair I'm following the instructions and battery is charged lights come on. Do you have any ideas? Thanks!!
Sometimes the transmitter and receiver are not paired right and the signal is not sent is a way that is recognised. Your manual has a pairing proceidure for that. You can even look online. Good luck!
@@Pascal_Robert--Rc_Creations Thanks! It was pairing properly but the joysticks on the remote weren't contacting the controls I took it apart and was able to get it working.
Maybe the small paddle one would fit, but its not made for that. You'd also have to change the front drivers, and find a way to deal with the track tension stretch. Basically, its pretty difficult
La valeure est une question de perspective. Si c'est la seule chose disponible, naturellement que sa en vaux la peine. Il y a moyen d'avoir une bonne performance a faible cout si vous etes capable de faire les pieces chez vous
You know it’s a good day when you load TH-cam up and and your favorite TH-camr posted a new vid
Hey man my dad’s birthday is coming up and I was wondering if you make a skido complete set because I really wanted to get one for him. I was wondering how much it would be for you to make a complete set with everything
500
Would be awesome to buy one that is assembled with the conversion kit already. Those R/C snowmobiles are phenomenal!
Lol 😂 never showed the limit of the lug height in any of my videos 🤣🤣🤣 glad we’re on the same level with that problem!! Haha and it’s pretty limited because of the stock chassis on around the sprockets
I assembled my tensioner piece a little differently. I put the plastic insert with the hole in first, ran the bolt through and put a lock nut between the insert piece and the main block (where the head of the bolt sits on yours). Works the same and no risk of the insert piece falling out.
If it works🤷♂️ its all good
could you build a snowmobile that you can buy?
Awesome. When ever the parts get here I can start the conversion.
Can you please give me the links where i can buy the yamaha toy and the conversion kit🙂.(edit) can you please do a kit vid on the ski doo and the polaris. Ps please put the links where you bought the toy and kit😊
If possible is there a way to get a less steep angle of attack on the front of the track, in real snowmobiles this is very important because you have to dig the snow out of the way rather than just drive over it.
That’s awesome. I wish we got enough snow here for one.
i got the red one of those and now i want to go get that kit and put it in mine
You should look into getting a pair of cutting pliers for removing the long stringy plastic bits before the conversion
Great video
Very nice work ! not sure how I am just finding your channel and I am sure you have been asked this many times but do you offer STL files for sale ?
Wondering the same thing
So is there a kit I could buy to use to do this then?
Oh damn that orange looks tasty. Really looking up to upgrading to that kit at some point😎
Well done Pascal !
would you ever think of making a ski doo elan
Yay thanks man I really want to get the kit too
Definitely want wait to get my rc snowmobile set up with one of these kits can't fckn wait cause then I can shred some snow with it and not get stuck as easy. Still gotta get my rc race buggy and truck set up with some electricals as well. Great vid
I can’t find the kit on your website
Hey buddy, where did you go to buy those parts?
Hey man do got a site web that I could buy this viper not upgrade?
I have one of those where do I get a kit for it?
Use LG HG2 batteries or other high current 18650 and make a replacement for the stock pack for a nice package.
If you do, set the lipo cutoff to the lowest level, otherwise it will cut off too fast.
Where can I buy a snowmobile like that for myself
Hey how did you get that much turning radius on your servo I’m not getting enough to do anything please help
Where can i get a custom rc ski doo
Do you have any built ready to go??
will we get the updated files if we already have them
Yes, youll need to contact me so i can send a link to download them
hey how do i get one of these kits
Hey I have a question what is the engine did you put inside because me to i update my rc snow mobile but I don’t no what is de engine to put inside
Its a brushless motor, 540 class. Its universally used for 1/10 scale rc's
Do you have a website to get one made ?
Great work! 👍
I would like to buy one how much bro any of them for free or broken one i would like to have it
Wow... stupendo... ciao dall'Italia
That's awesome! I got into hobby swaps myself and I'm addicted. Those little Chinese motors fit anywhere!
When I did the upgrade kit I never had any problems with the lugs being to long
Nice I just might have have have to rebuild my burnt one a post a vid. Cool how fast you can pump that out
How do I by one
Do you have a skidoo i can buy? Me and my dad really what one
Could u do a more in depth of the electronics
Can you make a Video of you driving it
You got me i subscribed.
Me too!😅 now I see he doesn't reply much to people's requests for kits and building
tres belle machine, bravo
How much voltage can it handle without any Problems?
With the electronic speed controller i installed, it can take 12.6v
How much are they
Hey man I bought one of these and it doesn't pair I'm following the instructions and battery is charged lights come on. Do you have any ideas? Thanks!!
Sometimes the transmitter and receiver are not paired right and the signal is not sent is a way that is recognised. Your manual has a pairing proceidure for that. You can even look online. Good luck!
@@Pascal_Robert--Rc_Creations Thanks! It was pairing properly but the joysticks on the remote weren't contacting the controls I took it apart and was able to get it working.
How much you want for it
Est ce possible de mettre le support du moteur côté gauche?
J'imagine que si tu pose la question cest parce que tu as un systeme sensored que tu ne peux pas inverser?
@@Pascal_Robert--Rc_Creations oui
Hey where do you get one of these toy snowmobiles
It was available in stock form in a lot of canadian stores last winter
How do you take the track and skid out
Yes, you take everything out. The only parts you keep is the tunnel and the hood
Where can we buy the stuff to convert our own?
www.rccreations.shop
@@Pascal_Robert--Rc_Creations awesome thanks! I will definitely be buying a kit✌️
How much does it cost in total? Including the stuff not included and the track too.
How much do you charge for these
and do you do it for sale?
How much voltage can the stock esc hold on the Viper rc and can it handle 9.6v?
Well for one the stock stuff is not an esc, its a simple toy pcb.
I'm sure it can handle 9.6V but probably not for long.
My stock RC yamaha holds 9.4v
How much?
Nice vid these things are cool
Do you sell them
Can I buy it from you
where can you get the servo from?
Amazon.ca
can the aftermarket track fit on the stock Yamaha skid?
Maybe the small paddle one would fit, but its not made for that. You'd also have to change the front drivers, and find a way to deal with the track tension stretch.
Basically, its pretty difficult
@@Pascal_Robert--Rc_Creations ok thanks now can i just buy a bigger motor and battery and install it would that work
How much
might have to get myself a viper n9q
Where do you buy those sleds
I have one for sale.
What the kv in the motor I made your Polaris and it’s so good I’m thinking about cutting my tunnel like you did in your wheelie madness video
I used a 3800kv on 3s
@@Pascal_Robert--Rc_Creations does it wheelie good
Well, youve seen wheelie madness... so
where do you use the 16 gauge wire?
To hold the track links together
Are STL files for sale separately?
They are in the bundle pack available on the website. It comes with the files for the polaris rush and the skidoo xm.
That's cool man when r you going to make a video using that cool killing machine 😲👍👍👍😁
On you website do I have to print all the stuff or do you print and ship it out
both options ore doable, the shop is just temporary out so i can do the orders that i got before i take on more
@@Pascal_Robert--Rc_Creations ok but when I get on your website it only show the Yamaha viper and the conversion kit
Yeah thats normal, i hide the items to avoid people ordering stuff
@@Pascal_Robert--Rc_Creations ok that make sense do you know other websites for rc snowmobiles
@@alientrc5886 here in canada, canadian tire offers them for sale
More Content like this is good :) too be honest all ur content is hella fire!
idk how to do this if i buy one can i ship it to u
He shows you in the video how to do it...
Just Wow!
Can you make a ski-doo for me please Polaris blue and black plz
I have that snowmobile if I sent mine too u could u do this too mine? And how much would it cost?
I no longer offer the service to do it, but it is very simple to do it at home. Anyone can do it!
What’s your website called
Www.rccreations.shop
Gosh I wish I could get one
Shoot I just printed the track, are there new files?
No, not yet...
@@Pascal_Robert--Rc_Creations do I have to re buy them when they are available
No, every subsequent update is free
How much is this rc . I’m seeing it on eBay for 189 bucks ?
$99.99
do you sale a rc snowmobile
Can you fix mine please 🥺🥺
And what is the batterie
11.1v 2200mAh gens ace battery
I would like to buy directly from u. I don't trust myself doing all that I will mess it up! If u decide to do sell I would love to buy one from u 👌
This is great can't tell you how long I've been looking for a legit rc snowmobile I have an artattack but I wanted something more realistic
Ah! A challenge I see!! Where u at!? We’re gonna race lmao 🤣 jk jk
I would love to see that
Can it wheelie
Assuming you have traction...
Yus
Can i buy the Polaris rmk from you
I no longer have it. Its being slod already
@@Pascal_Robert--Rc_Creations can i buy the yellow skidoo
@@Pascal_Robert--Rc_Creations or can I pay you to make me one
sick
Les modif n ‘en val pas le coup $$$$ pour le résultat final .très bon vidéo
La valeure est une question de perspective. Si c'est la seule chose disponible, naturellement que sa en vaux la peine. Il y a moyen d'avoir une bonne performance a faible cout si vous etes capable de faire les pieces chez vous
Can you make me one?
Could you make me one please
i want one so baaaad, im from greenlad so a lot of snow here...x)
I have the same rc
Est ce que ta battrie ses une 7.4 v
Sa depends... Dans la video cetais une 11.1v mais j'utilise des 7.4 a l'occasion
Merci
I wish I cude have 1
U model and fast
Man you really shouldn't put your hand on the edge of the guard like that cuz if that wheel let's go its probably gonna shred your hand
plz mor vide plz
How do we get this one
Hi. Can you link the electronics you used
Any 540 motor combo brushless
Mg90s servo
2.4ghz transmitter and receiver (spektrum dx3)
3s gens ace battery
Do you sell them completed