Hey there! For your application we want to use the adhesion promoter first: aaprintsupplyco.com/products/subli-glaze-adhesion-promoter and then the clear spray: aaprintsupplyco.com/products/subli-glaze-clear-sublimation-coating
Hello, in theory that should work if you put the Subli Glaze Clear Sublimation Coating on before transferring. The clear glaze coating will be what allows the transfer to apply so the white primer underneath should not interfere. Just be sure to follow all application settings for drying the clear glaze and I think it will work.
I’ve just started to sublimate and I do mugs and slate plaques, to do mugs I use an air dryer just for it and a heat press for the plaques. I want to try and do tea cups and glass plaques but can I cure them in the air fryer as I don’t have that small oven?
Hello, we have not tested air fryer for sublimation settings to confirm. For the actual subliglaze treatment coating the manufacturer does advise the use of an oven to prepare the items with their spray. It may work but testing beforehand would be a must before offering new products with this method.
I have a substrate that is a silver coin of stainless steel. I want to sublimate on it. I’m assuming I’ll need 1. Base white coat. 2. Adhesion promoter 3. Clear sublimation promoter - is that correct? If so, which order do I apply?
Hello, if the finish is very smooth we would advise the adhesion promoter first. If you are looking to use the raw aluminum as the background of the image (in place of any white in the graphic) you can choose from either Matte or Clear sublimation coating. If you desire a true white background, after the adhesion promoter, you can apply a layer of the White Base coating and the add the sublimation coating of your choice. I personally do like the look of the aluminum in the design as seen on sublimation photo panels available on the market but if you need colors to match as close as possible the white base coat would be the step to add in the process. Just remember: the white base coating itself is NOT a sublimation coating
Hello, because sublimation is a CMYK printing process (NO WHITE INK) the same rules apply here - no dark garments. This line of products is designed for hard surface application, would not be advised for material use
I need a white base do i spray it then put it the oven and then put the clear spray on and put that in the oven or just do it in 1 go? Trying to do this on slate but it doesnt seem to be coming out to good
Hello there, that is correct! Please note, the white base spray is not sublimation coating but needs to be prepared in the same style as you mentioned: white base, oven, clear spray, oven
Question please. I have been sublimating for roughly 15 years. I have always used sawgrass ink, SG1000, and Text R print paper. Will this work for this? Thank you.
Hey there! This is totally compatible, I would not change any of your normal dye sub printer settings with that model. I like the Texprint R paper also!
Hey there! Testing on individual items will always be advised to achieve the best results. Sanding would be helpful on particularly rougher texture surfaces
Hello, for the glass application I would advise the use of the adhesion promoter mentioned in the beginning of the video for best results. Smooth surfaces such as glass, metal, ceramic etc will benefit from this extra step!
Hello, the outlined instructions from the manufacturer are going to be for hard surface item usage. We have not performed any testing as of this time for fabric application
Hi ive been doing subli glaze clear onto wood some wood turns out brillaint others dont does the lightness of the wood matter? Which wood is best to use ive used basswood
Hello there, the wood color will 100% impact especially when using clear. Sublimation has no white ink meaning the background will be the color of the item you transfer onto. Lighter the wood the better as a dark wood will mute the colors greatly. There is a white base coat layer you can apply before the clear sublimation coating for high accuracy but the background applied will be white and could change the wood effect
@AAPrintSupplyCo thank you I tried to stay away from the white base coat as it doesn't show the wood affect as much, I will find lighter colour woods, thank you
Nice job :-). One quick tip to consider. Try a different sublimation paper if you always get residue left behind. Some quality papers never stick.
Thank you for your feedback, we appreciate you supporting the channel!
Nice product.. I have to try.
If you get even contact on a heat press you can probably sublimate it!
Can I use this to coat glass mugs? Can you make a video on how to do this?
Hey there! For your application we want to use the adhesion promoter first: aaprintsupplyco.com/products/subli-glaze-adhesion-promoter and then the clear spray: aaprintsupplyco.com/products/subli-glaze-clear-sublimation-coating
You think this will work if i used white primer on wood then the clear glaze on top?? Thank you.
Hello, in theory that should work if you put the Subli Glaze Clear Sublimation Coating on before transferring. The clear glaze coating will be what allows the transfer to apply so the white primer underneath should not interfere. Just be sure to follow all application settings for drying the clear glaze and I think it will work.
Be sure to let us know how it turns out and feel free to send in photos of the results to @aaprintsupplyco on Instagram
I’ve just started to sublimate and I do mugs and slate plaques, to do mugs I use an air dryer just for it and a heat press for the plaques. I want to try and do tea cups and glass plaques but can I cure them in the air fryer as I don’t have that small oven?
Hello, we have not tested air fryer for sublimation settings to confirm. For the actual subliglaze treatment coating the manufacturer does advise the use of an oven to prepare the items with their spray. It may work but testing beforehand would be a must before offering new products with this method.
Question. I need a white base. Do I use the glaze first and white or white then glaze?
Great question: WHITE BASE FIRST. THEN glaze and you should be golden:)
I have a substrate that is a silver coin of stainless steel. I want to sublimate on it. I’m assuming I’ll need 1. Base white coat. 2. Adhesion promoter 3. Clear sublimation promoter - is that correct? If so, which order do I apply?
Hello! We would advise the adhesion promoter first, then the white base coat and the clear sublimation coating last
Hi all, has anyone tried dyepress polygloss on aluminium?
Hello there! I am familiar with the product but I have not worked with that one personally. How do you like it?
Great video guys thanks for info!! I need a recommendation what can I get if I want to sublimate in raw aluminum sheets what product should I use?
Hello, if the finish is very smooth we would advise the adhesion promoter first. If you are looking to use the raw aluminum as the background of the image (in place of any white in the graphic) you can choose from either Matte or Clear sublimation coating. If you desire a true white background, after the adhesion promoter, you can apply a layer of the White Base coating and the add the sublimation coating of your choice.
I personally do like the look of the aluminum in the design as seen on sublimation photo panels available on the market but if you need colors to match as close as possible the white base coat would be the step to add in the process. Just remember: the white base coating itself is NOT a sublimation coating
Curing on oven, then how is this used for black t-shirts. I dont like curing process, because it limits size
Hello, because sublimation is a CMYK printing process (NO WHITE INK) the same rules apply here - no dark garments. This line of products is designed for hard surface application, would not be advised for material use
I need a white base do i spray it then put it the oven and then put the clear spray on and put that in the oven or just do it in 1 go? Trying to do this on slate but it doesnt seem to be coming out to good
Hello there, that is correct! Please note, the white base spray is not sublimation coating but needs to be prepared in the same style as you mentioned: white base, oven, clear spray, oven
@AAPrintSupplyCo brilliant thank you for your reply
You are very welcome :)
So after that clear spray you can sublimate?
Question please. I have been sublimating for roughly 15 years. I have always used sawgrass ink, SG1000, and Text R print paper. Will this work for this? Thank you.
Hey there! This is totally compatible, I would not change any of your normal dye sub printer settings with that model. I like the Texprint R paper also!
MUCH THANK!!!! @@AAPrintSupplyCo
❤🔥🔥
would you recommend to sand it 1st to get a smooth surface before spray? thanks and are you guys going to be at Graphics PRO in March at Irving?
Hey there! Testing on individual items will always be advised to achieve the best results. Sanding would be helpful on particularly rougher texture surfaces
How do you do it on a clear glass cup? Would you recommend doing the same steps?
Hello, for the glass application I would advise the use of the adhesion promoter mentioned in the beginning of the video for best results. Smooth surfaces such as glass, metal, ceramic etc will benefit from this extra step!
What should I use for fabric? I want to use the white base coat with a matte finish
Hello, the outlined instructions from the manufacturer are going to be for hard surface item usage. We have not performed any testing as of this time for fabric application
Hi ive been doing subli glaze clear onto wood some wood turns out brillaint others dont does the lightness of the wood matter? Which wood is best to use ive used basswood
Hello there, the wood color will 100% impact especially when using clear. Sublimation has no white ink meaning the background will be the color of the item you transfer onto. Lighter the wood the better as a dark wood will mute the colors greatly. There is a white base coat layer you can apply before the clear sublimation coating for high accuracy but the background applied will be white and could change the wood effect
@AAPrintSupplyCo thank you I tried to stay away from the white base coat as it doesn't show the wood affect as much, I will find lighter colour woods, thank you
@@jayf39 You are very welcome, happy to help. Have a great day!
What its your distribuidor
I need buy vinyl good price thanks
Hello there! I am sure we have something to fit your vinyl work: aaprintsupplyco.com/collections/heat-transfer-vinyl
Hi, we ARE a distributor for printing equipment, material and supply!
I have epson170 you know whre other brans for that its very exoensive
What products are you looking for?
Background music is too loud!
Hey there, thank you for your support!
1 bombe par dessin à 30$ çà fait chère 👎👎👎👎
Bonjour, ce produit est destiné à préparer des articles non sublimés à sublimer