3D PRINTED DEADPOOL MASK (WEARABLE)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2022
- Hey everybody!
I created this video back when I had my Ender5plus. I am now working with a bambu x1 carbon. The good news is, this helmet still fits at full scale on the x1 carbon.
This Deadpool file from Do3d.com has an amazing fabric texture, magnetic slots and swappable eyes that portray different emotions.
Thanks for checking out the video. Hop over to our other timelapse videos while you're here!
• 3D PRINT TIMELAPSE VID...
MATERIALS WE USED
File from
www.do3d.com/product-page/dea...
I used this filament for the red
amzn.to/3RXzA04
Printed on the Ender 5 Plus
amzn.to/3RKhuir
Anycubic Mono X Resin Printer
amzn.to/3RIL2xb
Favorite Resin
amzn.to/3LbhK7U
White part of eyes
amzn.to/3QIkavT
Magnets
amzn.to/3xmC00E
If you want to show us some love, feel free to buy us a cup of coffee in the link below.
www.buymeacoffee.com/3dprintsth3
#3dprinting #deadpool #deadpool3 #do3d #closerlook #best3dprinter #cosplay #diy #amazing #easy #3dprinted #cosplay - แนวปฏิบัติและการใช้ชีวิต
![เก่งแต่ลับหลัง (FINSTA) - ส้ม มารี (Zom Marie) Ft. Punch 4EVE [Official MV]](http://i.ytimg.com/vi/OOolBU2aC70/mqdefault.jpg)
This turned out amazing I’d buy this
Just finished printing on an Ankermake and here are some thoughts: 1) printed at 103% and still too ight. Probably need to slice it at 105% to fit my head and might ruin the seamless main face plate. 2) Since it's tight, any slight movement would separate the magnets and plates. Some magnet slots are too deep and couldn't attract/attach in place. Ended up gluing velco in between the magnets to hold the entire helmet in place. 3) many zits on the side plates (Filament sucks compared to resin) and I might have to do some careful sanding and eventually repaint, which defeats the purpose of the textured outer walls and colored filaments. Lots of failed prints and more $ than I anticipated. Overall, very great project overall. Well worth the money for the file.
I've been looking for this for a while... Just bought the files, and I'll be printing this soon!
Could you share me your files， I really want it, but I can't buy it
How did it come out? I'm having trouble getting it to fit on my ender 3 v2.
How did it come out? I'm having trouble getting it to fit on my ender 3 v2.
@@dongxiaoli Did they share the file with you if so can you share?
amazing
Thank you! eSUN has always done great for us!
What size printer did you do this on?
Podrias ayudar con cuanto del porcentaje se puede escalar el casco para una persona adulta?
what size do you recommend for 7 1/8” head size?
Can you share your settings? Im using cura and its saying 4 days and 700grams of filament for me just for the main front piece
Turned out great! I'm currently trying to slice this myself and I'm struggling to find a good position for the middle section with minimal supports. How did you position yours? Thanks
I had my chin and back as close to the build plate as possible. I had tree supports set on 70 for overhang. It didn’t come out perfect, the chin was a little rough underneath. But hardly noticeable. The top of the head also got a little of the circle pattern.
Thanks for the reply. I wasn't sure if positioning it nearly straight would have been better. I'll give yours a go. Thanks very much!
What orientation did you print the main front piece at? I dont want the get that swirl look when printing when it gets towards the top/end. Yours came out amazing!
So that’s the tricky part. I do have a bit of a swirl on the top of mine. I found the best way to get the fabric texture to print, is to have everything as vertical as possible. I didn’t want to sacrifice the front so I took the hit on the top. Close up you can notice, but it still looks great from a normal person to person perspective. I had my chin close to the build plate. That’s the other part that had some rough spots. I printed pretty slow too, that gave me better results. Hope that helps, good luck!
@@3dprintsthisweek very much, thank you for the info! I love your work, keep it up!
Hello i bought this file but it becomes Pastaization at the middle of project with tree support which filament are u using i couldnt make this mask with my p1s :(
Great work.
How did u prep it in the slicer?
Cant seem to get a good outcome..
TIA
I used the stock "super quality" in cura and adjusted the speed to be slower. I used tree supports as well.
Ich bekomme die Seiten teile nicht gedruckt 🤷♂️ kannst du mir zeigen wie du die gedruckt hast ?
This one turned out great! I actually bought the same filament and colour as you. Like you, I like it but i think I would also like to try it in a darker red too. I was just curios did you end up trying in in a different red? If so what colour did you find to be best ?
I haven’t yet. I want to. Just backed up on projects
@@3dprintsthisweek I know that feeling. Got so many models to paint myself but i just cant stop printing
did u find a dark red
did you print it how it loaded in the slicer? upright. trying to figure out the best position to avoid any weird spots cause of the texture pattern, i cant sand it back.
No, I adjusted everything to stand as vertical as possible. The only part I couldn’t avoid was under the chin.
That looks great. How much red filament did this take? Would I get all the red parts printed with a kg? Thanks.
I’m pretty sure I got it all just under a roll. Never hurts to have an extra roll on hand though.
How long did the main part take to print? Looks great!
I print pretty slow so a couple of days.
It looks great, I use an Ender 3 pro. Can you recommend some tips for clean part? Thanks
If you mean, it printing clean, just try to have everything as vertical as possible. The fabric texture does better that way.
Sensacional...... tambem estou começando na area de impressoes 3D, mas até acertar o ponto certo da qualidade velocidade e temperatura demora um pouco..... mas estão muito lindas suas peças, parabens.....
Thank you! It has taken me some time to figure it all out but I still really enjoy it. My kids have a great time picking out print projects too. Thanks for checking out the video, happy printing!
Brasil!!
This is crazy!! Do you do commission prints for ppl who dont have a printer or know of a way to get this made elsewhere if you dont?
Hey! I don’t at this time anyways. You may want to check out Etsy though. I’m sure you’ll find some comparable. Thanks for checking out our video!
I was able to figure out how to orient everything pretty good but something I can't figure out is the eyes. How did you orient the eyes?
I actually did my eyes on my resin printer. If you’re doing them with pla, I would stand them as vertical as possible, with just a little lean for supports on the backside.
Hi dude print looks awesome, did you have any trouble slicing the main part of the textured mask in cura? Keeps giving me an error and fails to slice, ive tried all different settings for it and using a different copy of the file to make sure it wasnt corrupted or anything. But i can slice the sides of the mask just fine. I get its a very detailed file but my computer is pretty beefy so it cant be that. Thanks!
That is so odd. Somebody else said they had that problem too. I sliced mine in cura with no trouble. I think they ended up using a different slicer. Which version of cura are you on?
@3d Prints This Week Yeah very strange. I'll have to download and try a different slicer. My cura appears to be version 5.2.1
@@joshbailey4124 That’s so strange. I’m on Cura 4.13.0 and I’ve sliced it several times. I would go for Prusa Slicer? That’s typically my backup. Sorry I couldn’t be more helpful.
@3d Prints This Week no its all good dude thanks for the quick replies 👍👍
Stupendo! with Cura, how do I know what size to use for my head?
i know its been a year but if you are still interested, there are some head files on thingiverse with various head sizes, you can put them in the slicer and see if it will fit.
Do u happen to know what is the difference between Low poly version: Front mid and Front low they look identical not sure what to use.
I’m sorry I don’t. I don’t see that option in mine.
What support settings did you have for the side pieces? I’m using prusa and are painting the bottom and the arc on the top.
In Cura, I used tree supports. I positioned it as upright as possible but left a slight tilt for the supports to grab. I’m not sure what the prusa version of tree supports are though.
@@3dprintsthisweek would printing it at 100% speed affect the fabric texture?
@@Idgafwic I would imagine so. I’ve only printed it slow though.
@@3dprintsthisweek finished it, weathered seams with airbrush, incredible print.
@@Idgafwic congrats! I love that file.
If you use cues what percentage size did you print at like the size of the helmet becuase I am working on my own and the print is constantly failing and shifting I print at 70 speed
I use cura. Mine was 100% size and the speed was 40.
@@3dprintsthisweek what printer do you use?
@@TRWwiszdom Ender 5 plus
Have you had any trouble with putting the magnets on the slots on the helmet? If so, what did you do to make the helmet a more snug fit for the magnets?
I haven’t had the issue. I use super glue and pop them in. I’ve never had one fall out after.
@3dprintsthisweek ok cool, but what would you do in case the magnets you have were a little too big for the helmet?
Hi! How many fillament did you spend on this helmet?
I was able to print all the red within one roll (1kg).
How much spoils of red filament did you use?
Only one and had leftovers
What layer height and nozzle size did you use!
0.4 nozzle, height 0.16
Can you make a tutorial on how to do the magnets like that?
The magnet slots are actually built into the design. All I had to do after I printed was glue the magnets in.
Heyho, the mask looks great!
I purchased the files on DO3D as well, I have some issues slicing the files in Cura. I always get a message that the slicing failed. Maybe you can help me? I Use the actual Cura SW 5.2.2 on my MacBook. My Printer is an Ender 3 V2 Neo.
I would love to read from you. Thank you and many greetings.
That is so odd. You’re not the first to have this problem. A few other people told me they had the same issue. I’m on an older version of cura 4.13 and it didn’t give me any issues. It must be something with the updated version of Cura. I’m not sure if anyone has found a work around or if they just did the file in a different slicer.
Use a different slicer
what orientations did you printed everything?
I did everything as vertical as possible. The sides and back needed to be straight up and down to get the best out of the fabric texture. For the main piece, as you can see in the video, I couldn't avoid some the chin getting messed up. I positioned that part with the chin touching the build plate. I will say, I printed again on the x1c since I made this video and it came out even better. Hope that helps.
did u ever find that dark red filament ur looking for i can't decide if this red is too bright for a dead pool mask
I’m still using ESun fire engine red.
@@3dprintsthisweek i mean dont get me wrong the fire engine red looks so pleasing but u know perfection is better. ill try the fire engine red
@@justinesq.281 totally agree. I just couldn’t find something closer that I liked.
What printer did you print on ?
Ender 5 plus at the time of the video. I have a Bambu x1 carbon now and it’s soooo much easier.
Hola bro, tengo un problema. Compre tu diseño por tu página de internet y no se puede segmentar. Tengo una Creality Ender Max Neo
¿Que puedo hacer? Espero tu respuesta muchas gracias
Hi, it's not my file. I just did a video showing where to get the file. I'm not sure what you mean, it can't be segmented. Are you trying to cut it into pieces?
@@3dprintsthisweek Gracias por responder hermano. Lo compré y al momento de querer imprimirlo me salió un error, la impresora que tengo es Creality Ender Max Neo, no intente cortarlo solo al quererlo imprimir sobre todo las piezas más grandes, me salía un error que no me permite imprimirlo, pero las piezas de menor tamaño si se pueden y no me sale el error. Algún consejo que me puedas dar para ello, o podrías explicarme cómo fue que tú lo imprimiste??
@@user-gt8qx7vs1y I would try to use a different slicer program to create your g-code. I think other people had the same problem and when they used a different program to slice it, it worked. Hope that helps.
What layer size U use to get thst result ? 0.1
Been doing .16 lately for best result
I have the file but when I try to slice it in cura 5.4.0 it gives an error message. Any thoughts on why this is?
I didn’t have that issue, but other people used a different slicer and it worked. Some even downgraded cura and it worked.
Ditto what the creator said, I had to upload version 4.13 to get it to slice, but now having problems getting Cura to work with my sonic pad. Presa also works, but I haven't used it before so I'm having issues with my printer.
Would you share the file please
Please someone tell me what is the material off the eyes Made of
www.amazon.com/gp/product/B007KGDV3K?ie=UTF8&psc=1&linkCode=sl1&tag=3dprintsthi00-20&linkId=c4e68abf30dd331b743555ee0f4489e5&language=en_US&ref_=as_li_ss_tl
@@3dprintsthisweek that is funny 🤣🤣 any way thank you for the amazing idea you made
Would an ender v3 SE print this?
The bed size would probably be your biggest problem.
Did you had to support the very top of the helmet?
I did back when I made this video. I had printed it on the ender 5 plus. I’ve tried it again with no supports in the top middle on the Bambu carbon, it still came out great.
@@3dprintsthisweek oh I see. Thats a strong af printer. I'm not sure my elegoo neptune 3 pro can do that
Can you print this on an original prusa
I haven't used that printer, i'm not sure.
Hey man. Do you have any clue why i keep having trouble printing out the sideds ?
What’s happening?
@@3dprintsthisweek ok, so I printed out the main mask at 105.68%. Then i printed out the one side at 105. 68%. But it came out smaller, where it don't fit the main mask accordingly.
@@3dprintsthisweek I know I probably should've scale the >whole< helmet first and then printed out separately. But I'm not sure how to do it. I tried using blender after the 2nd failed attempt, but It's kind of confusing
@@MOE13576 Do you have uniform scale on? Meaning are you sure all x, y, and z scaled up to the same size? If not, I’m stumped on that one.
@@3dprintsthisweek yes. Well thanks for replying anyways
Hey ! how can I get the desugn of it ?
Do3d.com
Can you breath? My only doubt is... how many minutes can you wear it?
I wore it for a couple of hours on Halloween. I got pretty warm but I was able to breath.
what size are the magnets?
amzn.to/3hDQx37
@@3dprintsthisweek thanks!
Man I love you
You deserve 29M subscriber
Very helpful
Im new to 3d printing i apologize if i sound like a newbie. Will a ender 3 print with that texture?
No worries, we are all new at some point. I think it could handle the texture but fitting it on the print bed might be a problem
Can you make one for me brother ?
You sound like the guy from Auction kings(TV show) hahaha
😂😂😂
@@3dprintsthisweek hey man. Your mask came out dope. I'm in the process of printing the face (?) Currently 85 hrs print time😮💨
@@MOE13576 nice dude! I still randomly run around my neighborhood in mine.
I need the 3D file to make mine, please
I don’t have the rights to give the file away. It’s a paid file from Do3d.com
@@3dprintsthisweek i'm from Colombia, soy colombiano por favor
How do i get it
I sell them if you are still interested
I mean the finished product not the file, file is from do3d
I want finished product mate
Hi there so you printed at 100% I was curious if you knew the circumstance in inches for your own head, I’m 23ish inches but I’m struggling trying to figure out what I should safely scale this to 😅 if anyone else has any knowledge feel free to send it my way, thank you!
I’m 24 and it’s tight on me. It fits, but tight.
@@3dprintsthisweek understood I’ll definitely scale up a little then, thank you very much!
I bought this last night and printed the eye pieces. Total mess.
Please send me free link stl please
Link is in the file. It’s not free. Gotta pay like everyone else 🤷♂️
It looks fine just give it a black wash