Doris! Please read this!!! Very important! I installed all the rear bars from BMR and the cradle lockout. I also did the def lockouts. It doesn't change the ride quality. You do not have to remove the rear cradle!!! Let the rear cradle down 3 inches install the upper bushings. Then tighten them up and replace the bottom part. On the front cradle bushings you need to get 2 new top bolts. Lower the front 3 inches. Cut off the 2 existing bolts. Reason is they are installed the wrong direction so you cant remove them without lowering the whole cradle. You install the new bolts rear to front. Opposite how the factory installs them. Install the upper bushings. Then you have to drill and remove the factory limiter on the bottom. Once removed install new bottom . All I did was remove the rear wheels and tires. If you call frank at BMR he will tell you the same thing. I went to BMR and purchased the new pars and met the guys. You get a 10 percent discount for cash and you pick up. I live in SW Florida. Do not listen to the directions on the website. Frank will tell you that too. Have fun. The rear upper bars were harder to install then the cradle lockout. Mark
Glad your back on. Those mods should improve the Redeye tremendously. I put the solid mounts on the Camaro. You feel the difference when you launch. Feels more planted. You still thinking of putting a cam in the Camaro? What's the word on the Mustang?
You are always improving I like that and the brakes is something most people never think about when they want speed. As always please be safe while driving
Great start on the mods. Are you gonna tune for e85? If so do a flex tune with Barth or curt. Gonna be tough to get to a 1000hp on 91 and running a race gas tune is expensive at over 10$ a gallon for race gas. Before you start racing at the strip you need a drive shaft.
Love your channel Doris, and the redeye is super hot to. You have got really cool cars, but it's definitely my favorite and like it best out of them all. We watched the vid when you got new tires & wheels for it from dragracingwheels.com, and am just getting ready to buy some for my Challenger from them as well. I'm going to go with the forgestars along with sticky Mickey 315s, so it should finally be able to hook then. I'm currently running 295s on her now, but they are just all weather radials and cannot get traction at all with them. Lol So I can imagine how much worse it is with 275s, and over 350 hp more ponys than my SRT8 when she was stock 🤣
Interesting that you went with aluminum cradle bushings! I'd be curious how it rides afterwards. I just upgraded mine to a set of Whiteline Cradle bushings which are made of synthetic elastomer which gives the ride quality of rubber at low speeds but react under accelerating, cornering and braking load to keep your chassis under control and also eliminate wheel hop. I can't believe the difference they made on my car, they are a must for launching the car hard. I'm really curious to see how your aluminum ones turn out! Cheers!
Yes! I'm so excited the building of the RedEye! Those Corsa headers are gonna make it sound 🔥. FoxBody guys are the worst for not upgrading brakes and probably one of the cars most in need of brakes LOL. Great video Doris!
Hi I think you are so much fun to watch you do the things you do to your cars the cleaning washing don't you ever stop take care and I just love the way you say all the accent the pronouncing of the word all 😂😊
I still have my Shelby in the garage. If it was gone, you wouldn't see it. I'm still waiting for the engine. It's not your typical stock block being put it. It's all upgraded with changes that I wanted added in. You'll see.
Great to see you back Doris! Tons of excitement coming to your channel with all the videos, I can't wait! You're gonna be a busy woman. Do you have any plans on changing the gear ratio on the Redeye?
Make sure you have the special tools available to to change those bushings out in the rear cradle. Without them, you are going to wish you never dropped that cradle. Check out a Chilton manual or google online. Good luck.
Enjoy your channel! With the high temps in AZ you should install a Ductless air unit in the garage. I did last summer best thing have done so nice to work on cars or motorcycles with no humidity and temp at 76’ very comfortable. Was not expensive install was under $2,000 for comfort. Lived in the desert for 10 years know how hot it can get!
I think I have to make a TH-cam channel for my daughter she’s a mechanic she can build an engine and transmission great to see a lady doing what you doing
Why not E85 for fuel ??? Q16 so expensive 😩 can’t wait to see your results , what size upper pulley are you installing 9% or 10% lower?? What is your thoughts on the long tube headers, not really a big power gain mod Haven’t done headers on my car yet even though everything else updated including Kong throttle body and ported snout , Why should I install long tube headers on my car ?? Better engine efficiency? What are your thoughts ? 😀
@Woman.Driven You inspired me so much to get under the hood of my car and I love your enthusiasm! I recently made a video thanking you about positively impacted my life and make me egar to learn more about cars (and my car) lol I wish an automotive class was open bc I would of loved to take it! Thanks again D keep up the videos please and never stop!!
Welcome back. I missed your videos. I love the energy. As a new owner of a Shelby GT350 I’m partial to that car getting the love but hey all your videos are great.
It's not exactly always the brakes but as far as the ECU EFI the fuel delivery system but make sure that excites Barn in optimal so you don't have the excess carbon buildup on top of the heads or head hurts and also dealing with the headers and exhaust doesn't necessarily have to be Flowmasters but it's better to get the dual heat treated exhaust the headers and exhaust exhaust pipes going from the exhaust manifold towards the muffler the catalytic converter he treated it last longer and you're running 400 pretty much over Overstock so 400 horsepower Overstock motor so heat build-up heat clearance but also P coolers radiator coolers transmission coolers and sometimes it's better to use synthetic to Royal Purple cuz the more horsepower you looking for the hotter it gets and remember the hot and cold hot cold issue Alchemy doesn't matter if it's die cast aluminum or steel the same thing to happen so while it higher speeds you know it's better to figure out a way to keep are now I'm going or, decent coolant keeping the engine down temperature law and the filters changed I studied art and you know I went to college but I was also in that IV I was also in the Navy USS Navy so as far as horsepower concerned it's landairsea and Dom 2 cycle engine 3 cycle engine 4 cycle engine as in Strokes but it's also Aviation engines also so BTU rating is pretty much down pat kick ass Hellcat
I’ll watch any video you produce. That heat would drive me out of Arizona fast. Looking forward to the follow up videos. Is the mustang still in the picture? Stay safe and well Artie ❤️
Thank you! The heat is killer but for two solid months.. maybe three. Even then it gets past 110 for maybe 20 total days or so. The rest of the year is perfect. Mustang is still there.. just waiting on the engine to show up 🙂
I envy you having that nice big garage. I have a two car garage but I wish it were bigger so I could do projects like you. Enjoy stay cool and your all so fortunate Stay well 👍
Great to see you . Looking forward to seeing you do some mods. Your human sunshine. Thanks for the content you inspire me to get off my a** and do some work on my Mustang.
Welcome back Doris how are you hope you and your family is staying safe you look as gorgeous as always can't wait until I see your future videos on the Dodge charger hellcat have a good day
Cool video keep up the good work. Trying to make a 1000hp+ for your redeye nice keep up the good work should check out Forza Tuning & Performance also get you that 1000hp quick but great video
Hi Doris, Happy Sunday !!! That is going to be exciting, I'm looking forward to the Camaro and Hellcat videos. Thank you for the update, have a great day 👋😃💜⭐
It’s ok. , I’ve been building two computers , swapping out a blown motor and now after my daughter took a look at your Channel, she wants us to Build a track/Race car , I understand busy. Thank you for encouraging the younger Generation , After watching u something in her switch. Keep up the good work, the young ones are watching, well back to work my son wants LED in his computer, he wants to be a fortnight developer/ beta tester ( he’s only 10 ) watching too much TH-cam again ... Iron sharpens iron
I know you are on onlyfans making millions now. By the way I am a subscriber on there and you are amazing but don't neglect us here on TH-cam. I really enjoy these videos too. You inspired me to do my own car repairs
We need to get all your subscribers to donate a few dollars each and then you'll be millionaire and then you can ditch the day job and give us all Doris daily driven TV 😉 Nice one Doris good to have you back.
that car is going to have an unbeatable speed very soon you are going to tire your goal do not despair much more to explore those more powerful engines
Thanks for the video... Happy you are back... Enjoy watching you bubbly personality again... And yes of course your beautiful face... Much love... Stay healthy....
Nice ! We may see some flames 🔥 out of the Hell Cat Red Eye. You also may need someone to help with the rear of that Hell Cat Red Eye. Be safe as always! Thank you for your videos!
Hope you keeping safe I seen your state has been hit with a spike so stay safe that's important. I'm not a fan of the Hellcat I'm a Chevy fan .God bless
Great video Doris. Can't wait for them install vids. But what i want to know is what mods are in the works for the yota and is there gonna be a giveaway for it, cuz i want in 😁
Doris! Please read this!!! Very important! I installed all the rear bars from BMR and the cradle lockout. I also did the def lockouts. It doesn't change the ride quality. You do not have to remove the rear cradle!!! Let the rear cradle down 3 inches install the upper bushings. Then tighten them up and replace the bottom part. On the front cradle bushings you need to get 2 new top bolts. Lower the front 3 inches. Cut off the 2 existing bolts. Reason is they are installed the wrong direction so you cant remove them without lowering the whole cradle. You install the new bolts rear to front. Opposite how the factory installs them. Install the upper bushings. Then you have to drill and remove the factory limiter on the bottom. Once removed install new bottom . All I did was remove the rear wheels and tires. If you call frank at BMR he will tell you the same thing. I went to BMR and purchased the new pars and met the guys. You get a 10 percent discount for cash and you pick up. I live in SW Florida. Do not listen to the directions on the website. Frank will tell you that too. Have fun. The rear upper bars were harder to install then the cradle lockout. Mar
Doris! Please read this!!! Very important! I installed all the rear bars from BMR and the cradle lockout. I also did the def lockouts. It doesn't change the ride quality. You do not have to remove the rear cradle!!! Let the rear cradle down 3 inches install the upper bushings. Then tighten them up and replace the bottom part. On the front cradle bushings you need to get 2 new top bolts. Lower the front 3 inches. Cut off the 2 existing bolts. Reason is they are installed the wrong direction so you cant remove them without lowering the whole cradle. You install the new bolts rear to front. Opposite how the factory installs them. Install the upper bushings. Then you have to drill and remove the factory limiter on the bottom. Once removed install new bottom . All I did was remove the rear wheels and tires. If you call frank at BMR he will tell you the same thing. I went to BMR and purchased the new pars and met the guys. You get a 10 percent discount for cash and you pick up. I live in SW Florida. Do not listen to the directions on the website. Frank will tell you that too. Have fun. The rear upper bars were harder to install then the cradle lockout. Mark
DORIS BACK IN THE HOUSE... PEACE AND LOVE... WHERE ARE DOGS AT DORIS...
Glad your back on. Those mods should improve the Redeye tremendously. I put the solid mounts on the Camaro. You feel the difference when you launch. Feels more planted. You still thinking of putting a cam in the Camaro? What's the word on the Mustang?
Hope you are getting the performance mods started this weekend. Redeye Redeye Redeye. Try and stay cool. Sarah just got a 14,000 BTU A/C in her garage
You are always improving I like that and the brakes is something most people never think about when they want speed. As always please be safe while driving
So glad to see you back ! While I liked the Fans only page, I love seeing you here as well. Hugs !!!!!!!!!!
Thanks! I should be back to making videos soon as work is allowing me more time ;)
You love me
Is the Onlyfans any good ?
@@fusionheee7507 im waiting for same answer
Someone answer lol
Great start on the mods. Are you gonna tune for e85? If so do a flex tune with Barth or curt. Gonna be tough to get to a 1000hp on 91 and running a race gas tune is expensive at over 10$ a gallon for race gas. Before you start racing at the strip you need a drive shaft.
Love your channel Doris, and the redeye is super hot to. You have got really cool cars, but it's definitely my favorite and like it best out of them all. We watched the vid when you got new tires & wheels for it from dragracingwheels.com, and am just getting ready to buy some for my Challenger from them as well. I'm going to go with the forgestars along with sticky Mickey 315s, so it should finally be able to hook then. I'm currently running 295s on her now, but they are just all weather radials and cannot get traction at all with them. Lol So I can imagine how much worse it is with 275s, and over 350 hp more ponys than my SRT8 when she was stock 🤣
It's nice to see you back. I'm looking forward to see all those mods put into the Red Eye.
That's OK good to see that you're working stay safe lots of projects for a good job with the color of that hellcat
You will have a huge barrel of fun installing those headers.........glad you have a hoist!
We will have close to 120 here in Lake Havasu today.
Lol.. headers are just dreadful to install. Wow.. that is hot. You’re also more north so I expected it to be a bit cooler.
@@woman.driven I'm in Denver today and is close to 90° up here 🥵
It's been so hot here in AZ. Red eye is my favorite so can't wait.
Interesting that you went with aluminum cradle bushings! I'd be curious how it rides afterwards. I just upgraded mine to a set of Whiteline Cradle bushings which are made of synthetic elastomer which gives the ride quality of rubber at low speeds but react under accelerating, cornering and braking load to keep your chassis under control and also eliminate wheel hop. I can't believe the difference they made on my car, they are a must for launching the car hard. I'm really curious to see how your aluminum ones turn out! Cheers!
Yes! I'm so excited the building of the RedEye! Those Corsa headers are gonna make it sound 🔥. FoxBody guys are the worst for not upgrading brakes and probably one of the cars most in need of brakes LOL. Great video Doris!
We all missed you on TH-cam. I love videos about your cars. I can't wait to more about the Redeye.
I wish we had more women like u into cars ima new sub and ur point are valid the brakes are so important
Right ❤❤
YES!! Content for the M3 is coming. Looking forward to the Redeye upgrades and the Camaro vids. Keep up the great content!!
☺️😉 hopefully more once it’s up and running how it should.
Love your hellcat, gorgeous colour! I would be scared of driving it high speed. Glad to see you back! Totally enjoy watching your videos, you rock! ❤️
Hi I think you are so much fun to watch you do the things you do to your cars the cleaning washing don't you ever stop take care and I just love the way you say all the accent the pronouncing of the word all 😂😊
Can't wait to see how the Redeye with all the performance mods do on the road. I am gonna say it will be superfast.
Welcome back chica, long time haven't seen ya!!
Long time lol. Glad to be back ;)
Hey Doris, Glad to see another video and update. Looking forward to seeing the mods you do the Hellcat. Hope you stay safe during the heat wave.
Love to hear your voice again Dorris 👊🌡
Glad to see you back on TH-cam Doris! It's been a while since the last Sunday/Dorance Day.
For a moment i thought that this vedio will be finally shelby is back
I still have my Shelby in the garage. If it was gone, you wouldn't see it. I'm still waiting for the engine. It's not your typical stock block being put it. It's all upgraded with changes that I wanted added in. You'll see.
Doris you dont know too much long comma is not batter for patient health that is why i got little worried about shelby
@@woman.driven ياريت تعملى ترجمه الحلقات بالعربي انا من مصر و متابعك
Great to see you back Doris! Tons of excitement coming to your channel with all the videos, I can't wait! You're gonna be a busy woman. Do you have any plans on changing the gear ratio on the Redeye?
I’m still.catching my breath from your OF site. Scorching!!!!!!! But it is good to see and hear over here where it all began.
Is her only fans worth it. I was thinking of getting it but want a taste first lol. I'm down to get the year one if it worth it
Make sure you have the special tools available to to change those bushings out in the rear cradle. Without them, you are going to wish you never dropped that cradle. Check out a Chilton manual or google online. Good luck.
You never cease to impress with your organization and knowledge. Thanks for the update.
Enjoy your channel!
With the high temps in AZ you should install a Ductless air unit in the garage. I did last summer best thing have done so nice to work on cars or motorcycles with no humidity and temp at 76’ very comfortable. Was not expensive install was under $2,000 for comfort.
Lived in the desert for 10 years know how hot it can get!
Welcome back your a hard working woman and I respect that hope everything goes as planned for the red eye
Hi Doris, Thanks for the update. Looking forward for those Mod Videos.
Glad to know that you are busy at work, stay safe Doris.
I think I have to make a TH-cam channel for my daughter she’s a mechanic she can build an engine and transmission great to see a lady doing what you doing
Glad ur back I've missed your videos Miss. Work can be demanding I know lol. I love your Redeye it's so badass can't wait. 🙃🙃🙃🙃❤
Hey Doris, been a while since the last time...I missed your videos but I know your busy at work...Keep safe and healthy beautiful...👍👌🙏😘
Your hellcat redeye will definitely look great after all the mods
I was bored out of mind, and i saw your smile, and a sigh of relief, i see you and i know Jehovah was showing off when he made you. And i love that😄
Red Eye, Red Eye, Red Eye, Red Eye.......four of my favorite things . Thank you Doris for another amazing video !
First of all welcome back Doris, and smart move by upgrading the brakes first on a car that fast.
Hey thanks! Yup.. need to. A car with that much power can get to 170+ at the half mile. I need to slow all that weight down fast lol
Why not E85 for fuel ??? Q16 so expensive 😩 can’t wait to see your results , what size upper pulley are you installing 9% or 10% lower??
What is your thoughts on the long tube headers, not really a big power gain mod Haven’t done headers on my car yet even though everything else updated including Kong throttle body and ported
snout , Why should I install long tube headers on my car ?? Better engine efficiency? What are your thoughts ? 😀
Awesome to see you back on the channel. Missed seeing your videos. Love your FansOnly content. Keep up the hard work.
Dear Doris , I've been waiting for this build lol
Now it starts. Everything I need is there ;)
@Woman.Driven
You inspired me so much to get under the hood of my car and I love your enthusiasm! I recently made a video thanking you about positively impacted my life and make me egar to learn more about cars (and my car) lol I wish an automotive class was open bc I would of loved to take it! Thanks again D keep up the videos please and never stop!!
Welcome back. I missed your videos. I love the energy. As a new owner of a Shelby GT350 I’m partial to that car getting the love but hey all your videos are great.
Welcome back.We waited for your video and that too for two long weeks.
I hope you are safe, too. But work is work, and we need to work to enjoy the toys. LOL Missed you and nice to see you again
It's not exactly always the brakes but as far as the ECU EFI the fuel delivery system but make sure that excites Barn in optimal so you don't have the excess carbon buildup on top of the heads or head hurts and also dealing with the headers and exhaust doesn't necessarily have to be Flowmasters but it's better to get the dual heat treated exhaust the headers and exhaust exhaust pipes going from the exhaust manifold towards the muffler the catalytic converter he treated it last longer and you're running 400 pretty much over Overstock so 400 horsepower Overstock motor so heat build-up heat clearance but also P coolers radiator coolers transmission coolers and sometimes it's better to use synthetic to Royal Purple cuz the more horsepower you looking for the hotter it gets and remember the hot and cold hot cold issue Alchemy doesn't matter if it's die cast aluminum or steel the same thing to happen so while it higher speeds you know it's better to figure out a way to keep are now I'm going or, decent coolant keeping the engine down temperature law and the filters changed I studied art and you know I went to college but I was also in that IV I was also in the Navy USS Navy so as far as horsepower concerned it's landairsea and Dom 2 cycle engine 3 cycle engine 4 cycle engine as in Strokes but it's also Aviation engines also so BTU rating is pretty much down pat kick ass Hellcat
I’ll watch any video you produce. That heat would drive me out of Arizona fast. Looking forward to the follow up videos. Is the mustang still in the picture? Stay safe and well Artie ❤️
Thank you! The heat is killer but for two solid months.. maybe three. Even then it gets past 110 for maybe 20 total days or so. The rest of the year is perfect. Mustang is still there.. just waiting on the engine to show up 🙂
I envy you having that nice big garage. I have a two car garage but I wish it were bigger so I could do projects like you. Enjoy stay cool and your all so fortunate Stay well 👍
Cant wait to see the red eye becoming a beast.
The Corsa longtubes will sound so good on the redeye
Digging the new hair color and that shirt and of course the new mods.
My wife and I are big fans it's good to see you!!!
I look forward to the Hellcat Redeye upgrades and mods
Try AAD suspension down the line (All angle design) i heard its a very good suspension forza tuning use them on their builds just my 2 cents
Great to see you . Looking forward to seeing you do some mods. Your human sunshine. Thanks for the content you inspire me to get off my a** and do some work on my Mustang.
Can’t wait to see your review of the cradle bushings. I’ve been thinking about doing it on my V6 Challenger I’m in the process of 5.7 swapping.
Welcome back Doris how are you hope you and your family is staying safe you look as gorgeous as always can't wait until I see your future videos on the Dodge charger hellcat have a good day
Hi Doris, hope you and Chris are enjoying the summer🥂🥂
Your going to be busy can't wait to see how the redeye performs. Wounded where you been. ❣️
Glad that you're Back.
Welcome back Doris. Nice to see you and your videos on your rides. 👍
Cool video keep up the good work. Trying to make a 1000hp+ for your redeye nice keep up the good work should check out Forza Tuning & Performance also get you that 1000hp quick but great video
Love Mopar. Love the Challengers, have the RT classic but the Hellcat will be next! Keep up the great videos 👍🏼
But it's a dry heat, can't wait for the red eye. Looking good as always.
Hi Doris, Happy Sunday !!!
That is going to be exciting, I'm looking forward to the Camaro and Hellcat videos. Thank you for the update, have a great day 👋😃💜⭐
Lol can I get a loan? Best looking mechanic on TH-cam glad you're back posting
Welcome Back Dorris, i enjoy all of ur videos 😎😎😎👍🏾👊🏾🤙🏽
Doris I’m glad you’re back bringing us video’s! I can’t wait to see how your Hellcat Redeye comes out after all of the mods!🐟
Every time I watch your videos it makes me want to buy a Hellcat. Looking forward to all the install videos.
keep checking the aluminum bushing mounts they can tear up the surrounding metal or mounting holes
anybody tell me what is only fan i want this pack🤔
Hi Doris, You didn't say how the Mustang was progressing.
It’s ok. , I’ve been building two computers , swapping out a blown motor and now after my daughter took a look at your Channel, she wants us to Build a track/Race car , I understand busy. Thank you for encouraging the younger Generation , After watching u something in her switch. Keep up the good work, the young ones are watching, well back to work my son wants LED in his computer, he wants to be a fortnight developer/ beta tester ( he’s only 10 ) watching too much TH-cam again ... Iron sharpens iron
I know you are on onlyfans making millions now. By the way I am a subscriber on there and you are amazing but don't neglect us here on TH-cam. I really enjoy these videos too. You inspired me to do my own car repairs
We need to get all your subscribers to donate a few dollars each and then you'll be millionaire and then you can ditch the day job and give us all Doris daily driven TV 😉
Nice one Doris good to have you back.
I love her channel! And if you dont have her onlyfans, your missing out big time! 💙
Doris - love your enthusiasm - i love how thorough you are - Pretty Lady with her awesome cars
that car is going to have an unbeatable speed very soon you are going to tire your goal do not despair much more to explore those more powerful engines
Your car is gonna look so good! It's great to see you again and thanks for sharing. Have a wonderful day.
You can’t do all that cool shit if you don’t work... work on, we will still be here.
Very very true. Glad you understand and appreciate the support ☺️😉
You should come to California were the weather is a little cooler and also it's perfect for the tires to gets some good grip on the track as well.
Waiting for your video to come....took so long...😊😊👏👏👍🏼👍🏼
Really awesome 👏
Great upgrades 👍🏼👍🏼👏
Thank you! Exciting to install all the mods.
Woman.Driven waiting to see next vlog of upgrading 😃😊
So happy to see you back doris 🤙🏽👌🏽
Glad to see you're back Stay out the heat.
Nice to see you back Doris
Thanks for the video... Happy you are back... Enjoy watching you bubbly personality again... And yes of course your beautiful face... Much love... Stay healthy....
Glad to see you back it's been a min cant wait to see more of the hellcat have a great day
Lady You Are Fantastic With All The Work You Have Done On That Car I Must Say You Are Great At This Really Indeed.
Nice !
We may see some flames 🔥 out of the Hell Cat Red Eye. You also may need someone to help with the rear of that Hell Cat Red Eye. Be safe as always! Thank you for your videos!
Hey Girl!!!!!! Great to see your video’s pop up again !!!!!
Hope you keeping safe I seen your state has been hit with a spike so stay safe that's important. I'm not a fan of the Hellcat I'm a Chevy fan .God bless
What about the MUSTANG you didn't mention it Doris, I'm curious when the engine rebuild will start?
Also wondering... it’s been a while - the garage looks great!! I missed the 2nd lift install - I need to get caught up
Great video Doris. Can't wait for them install vids. But what i want to know is what mods are in the works for the yota and is there gonna be a giveaway for it, cuz i want in 😁
finally see you back hopefully have a graet good healthy and have good jobs.
Almost makes u forget she's discussing the car♡
A beautiful, intelligent girl who is versed in mechanics and cars is a delightful sight! How can you not like it here?
Very creative ; ) production of an artistic work .
Love it Doris ❤️😍
Doris! Please read this!!! Very important! I installed all the rear bars from BMR and the cradle lockout. I also did the def lockouts. It doesn't change the ride quality. You do not have to remove the rear cradle!!! Let the rear cradle down 3 inches install the upper bushings. Then tighten them up and replace the bottom part. On the front cradle bushings you need to get 2 new top bolts. Lower the front 3 inches. Cut off the 2 existing bolts. Reason is they are installed the wrong direction so you cant remove them without lowering the whole cradle. You install the new bolts rear to front. Opposite how the factory installs them. Install the upper bushings. Then you have to drill and remove the factory limiter on the bottom. Once removed install new bottom . All I did was remove the rear wheels and tires. If you call frank at BMR he will tell you the same thing. I went to BMR and purchased the new pars and met the guys. You get a 10 percent discount for cash and you pick up. I live in SW Florida. Do not listen to the directions on the website. Frank will tell you that too. Have fun. The rear upper bars were harder to install then the cradle lockout. Mar