Hate to say this but using a fixed pulley instead of the one way clutch type is a bad deal I've seen so many of those setups break. Reason being when you get off the throttle your not allowing the pulley to kick back. Shocking the main shaft and eventually breaking it. The do sell 2.85 and a 2.65 factory style upper pulley. I would also use innovators west harmonic balancer 15% over drive to get an other pound. Also you will be reaching the limit of the 1050x rapidly
OMG DORIS!!!!! I’m so glad that you’re back!!!! I’ve missed you so much that I’m really commenting before I finish seeing the video😂🤣🥰I hope you’re doing well!!🥰🥰
Just saw your alternate channel or maybe the main channel since it's in spanish. Smart thinking. It was kinda fun listening. I'm not bilingual by any means but it was cool.
Placing masking tape to windshield to mark a reference makes aligning wiper blades easier during installation with no second guessing. Just an fyi. Curious what the torque spec is on the pulley bolt.
Someone help me out here please , I’m installing a long tube headers and I got this pulley kit , do I have to change my injectors ? Or I can still run with the factory ? Note: I don’t planing add more hp or anything , I don’t go to tracks race..
Nice to see you back Doris Great video as always Look forward to the rest of them on the Hellcat Redeye. Love Challenger's I have a 2015 Scat Pack 6 speed it's so much fun Be safe and look forward to the next !
I don't understand why i haven't seen this channel Before, Its awesome ...I'll watch every video "BTW im in AZ also if you would like to get some Tacos"
Hi Doris! Wow you make everything you do look very easier to do, abd just for future reference, try to take a breath when you're talking once in a while, you don't have to tell us everything in one single breath, you sound very tired vecause you want to say a lot of things, but you don't have to really, you can stop for a few seconds and take a breath and continue, no one is goung to get angry because you stop talking, we know is a bit hard what you're doing, so great job, you are my favorite youtuber female, thank you for sharing and have a great day, bye 'till the next video, im so exited to see the hellcat ride very fast, i love the sound of the supercharger.
Wouldn't it be better to have a clutch pulley like the stock one? Hellraiser has that for the Hellcats. Would really like to see the work you do on the pulley. Why did you cut that out?
I wasn't feeling to good today but i had to come here to smile... and seeing Dorace's smile... did the trick.. Good seeing you still rocking these car videos girl.. excellent set of wheels too i might add
What’s going on with the gt350 ? it’s been on the back burner for a long time. I can’t blame you I bought a 2019 gt with plans to supercharge but after seeing almost everyone either blowing there engine or transmission. I decided to sell and by a hellcat that already has the power I was looking for and is reliable with out worrying about the engine and transmission.
Still waiting for the engine lol. It's almost done so the GT350 will be back to running. Good call on selling.. it's a hit or miss with the engines blowing regarding the GT's. Most will keep quiet about it and sell after fixing it on the cheap. The Hellcat is a good choice. I so far love the raw power it provides. Have fun with it ;)
Might emphasize care when removing the SC lid as the gasket is quite fragile, saw you used the plastic removal tool and that is much better than screwdrivers, however if it is damaged, then a whole new gasket set is needed. Also you didn't show the torque and bolt installation info you mentioned.
Crazy that the impact didn't work on that bolt very well. Maybe someone when crazy at the factory. Congrats on starting the power build on the hellcat!
It was terrible. Nothing would work till I was ready to stop and take it to a shop the next day for them to pull it. So annoying to remove, but I am glad it's all done.
why you not choose the 2.72 Hellraiser? she's have the same clutch system like your OEM and less risk to damage rotor. I hope when you install your ATI crank pulley you pinning the crank!! nice job sweet blonde!!
Damm Doris you always make working on your car look soo easy even though it’s not! I can’t wait to see how your Redeye performs after you install all the mods!🐟
How long did it take? If you already have the smaller pulley why don't you put it on now?... You look happy and beautiful... Thanks for the video... Much love... Stay healthy and safe... thanks Chris for helping
I'm an old mechanic I love what your doing. I mean really a beautiful woman with skills that is just awesome. I actually look forward to your videos. Thanks Dorace for making an old mechanic smile.
Redeye pulley swap is not the same as regular hellcat as you have now found out 😉 Should scream with the pulley. We went an easy 9.98 with the same pulley and injectors on 93 octane.
Im not sure but I thought the demon had a larger cubic inch supercharger...love the video you are always on point with your info. I could listen to you for hours
i have been not writing stuff much on TH-cam my yellow ford truck went in the lake to its roof, i just got report the motor broke & drive line failed too after i shut it off, launching my boat! well I hear normal rump then it went quick no lag it was quick backward standard trans failed too i though the gears worked, engine may have been turned with water in it, un able to repair totaled poor me now it chevy time 4x4 auto manual tow package v6 add on stuff air flow & ground effects to Gregg
Way better sponsor plug than most youtubers. Thank you for not making it forced!
Pink gloves, Purple car, Orange grip mats... Like some 70s throwback.. Ha ha nice one Doris, great work as usual.
Hate to say this but using a fixed pulley instead of the one way clutch type is a bad deal I've seen so many of those setups break. Reason being when you get off the throttle your not allowing the pulley to kick back. Shocking the main shaft and eventually breaking it. The do sell 2.85 and a 2.65 factory style upper pulley. I would also use innovators west harmonic balancer 15% over drive to get an other pound. Also you will be reaching the limit of the 1050x rapidly
This is a link explaining the decoupled and how important it is. th-cam.com/video/cPaCcDRudNo/w-d-xo.html
The one I did made 980hp we also went with id 1300 fuel injectors
When you do smog on your car do you take off the intake and put the stock one back so it can pass the smog?...
OMG DORIS!!!!! I’m so glad that you’re back!!!! I’ve missed you so much that I’m really commenting before I finish seeing the video😂🤣🥰I hope you’re doing well!!🥰🥰
Just saw your alternate channel or maybe the main channel since it's in spanish. Smart thinking. It was kinda fun listening. I'm not bilingual by any means but it was cool.
I never seen girls like u before,who such a crazy about cars
Placing masking tape to windshield to mark a reference makes aligning wiper blades
easier during installation with no second guessing. Just an fyi.
Curious what the torque spec is on the pulley bolt.
Well that's cool! Wasn't aware...thanks.
Smh, No Books, No Charts, just working on cars. Gotta luv it... U Go Girl!!! Stay Safe, Be Safe!!!
I look forward to your uploads! Your energy and enthusiasm is a breath of fresh air! Much needed in these times we live in now! Thank you!
I like the fact that you're willing to get your hands dirty and you're willing to work on the hard stuff not just the simple little things
Someone help me out here please , I’m installing a long tube headers and I got this pulley kit , do I have to change my injectors ? Or I can still run with the factory ? Note: I don’t planing add more hp or anything , I don’t go to tracks race..
No need to change your injectors for a pulley job. Do tune it, but that goes without saying as you're installing catless headers. :)
@@woman.driven appreciate your reply :) yes for sure Tuned ..God bless you and your family ..
Hola te consulto tengo un Citroen C5 2005 con suspensión hidroactiva , se puede cambiar la suspensión a normal
Great job. Did you pin your crank on your Hellcat.
Ya te extrañaba!!! Tenia mucho que no me aparecían tus videos!!
The garage looks really good!!!
Getting closer to 1k so exited 🤗🤗
Are you going to install Strut Tower Braces? I am looking to add them to mine. Was wondering which ones to get.
Nice to see you back Doris
Great video as always
Look forward to the rest of them on the Hellcat Redeye. Love Challenger's I have a 2015 Scat Pack 6 speed it's so much fun
Be safe and look forward to the next !
I don't understand why i haven't seen this channel Before, Its awesome ...I'll watch every video "BTW im in AZ also if you would like to get some Tacos"
She’s already got a man
I have that husky electric wrachet, unfortunately it didnt last more than a year, had to upgrade to a snap on one
Poncho's gaming , i would never buy overated snap on.
Hi Doris!
Wow you make everything you do look very easier to do, abd just for future reference, try to take a breath when you're talking once in a while, you don't have to tell us everything in one single breath, you sound very tired vecause you want to say a lot of things, but you don't have to really, you can stop for a few seconds and take a breath and continue, no one is goung to get angry because you stop talking, we know is a bit hard what you're doing, so great job, you are my favorite youtuber female, thank you for sharing and have a great day, bye 'till the next video, im so exited to see the hellcat ride very fast, i love the sound of the supercharger.
What is the mpg difference that you noticed by changing the pully and bigger injectors?
Do you have to remove the fuel rails or just disconnect the wires to the injectors
I really appreciate how organized your are, nice work.
Very organized with the bolts I just start placing them all over the engine area and try to find them all when putting it back together.
Wouldn't it be better to have a clutch pulley like the stock one? Hellraiser has that for the Hellcats. Would really like to see the work you do on the pulley. Why did you cut that out?
I wasn't feeling to good today but i had to come here to smile... and seeing Dorace's smile... did the trick.. Good seeing you still rocking these car videos girl.. excellent set of wheels too i might add
Are you going to pin the crank also or does that come later.
Do you know how many liters the super charger is? 2? 3?
The future belongs to those who believe in the beauty of their dreams. ; ) Take care.
What was the brand of the catch can and that aluminum hellcat logo in it?
What’s going on with the gt350 ? it’s been on the back burner for a long time. I can’t blame you I bought a 2019 gt with plans to supercharge but after seeing almost everyone either blowing there engine or transmission. I decided to sell and by a hellcat that already has the power I was looking for and is reliable with out worrying about the engine and transmission.
Still waiting for the engine lol. It's almost done so the GT350 will be back to running. Good call on selling.. it's a hit or miss with the engines blowing regarding the GT's. Most will keep quiet about it and sell after fixing it on the cheap. The Hellcat is a good choice. I so far love the raw power it provides. Have fun with it ;)
Might emphasize care when removing the SC lid as the gasket is quite fragile, saw you used the plastic removal tool and that is much better than screwdrivers, however if it is damaged, then a whole new gasket set is needed. Also you didn't show the torque and bolt installation info you mentioned.
Crazy that the impact didn't work on that bolt very well. Maybe someone when crazy at the factory. Congrats on starting the power build on the hellcat!
It was terrible. Nothing would work till I was ready to stop and take it to a shop the next day for them to pull it. So annoying to remove, but I am glad it's all done.
I bought mine this past weekend...watching this for tips. 😊
Tiene actualización de salto de rueda el charger
Glad to see you super D, my female mechanic.
YES!!! Can't wait to see these parts installed 😎 Love that hellcat!!!
what kind of injectors are you running and who unlock your pcm ?
I haven't installed them yet. That's the next video. I have ID1050 and a Diablo PCM. Tuning will be done by HHP.
Hun what camera are you using in the beginningbof the video?
Did you change the injectors and plugs what type of cables do you have
Damn I love the way she works them tools!
Sooo when are you getting the 2020 gt500? That thing is a beast
After I get my hands on the Z06 version of the C8 when it's out
Did that kit come with a tune?
What torque wrench is that? I want yo buy a torque wrench but want to ensure I get something good, thanks!
I really like your hellcat. I just like that Shelby more & cant wait to see that Shelby going again.
Same here!
Even I did it because she was driving a mustang.
Pretty sure the engine wrecked up so she gave up on the muscle high performance sports type car 🚘
Nothing is more impressive than a person who is secure in the way God made her ; ) Take care.
What’s wrong with patron page can’t find it..?
She knows about vehicles, only if she’s a gamer, and cook...WHAT! The best type of female! Uh marriage...yes💯
I have The magnetic trays I like those where did you get them from?
Crazy how easy that motor makes power🔥🔥🔥
why you not choose the 2.72 Hellraiser? she's have the same clutch system like your OEM and less risk to damage rotor. I hope when you install your ATI crank pulley you pinning the crank!! nice job sweet blonde!!
White shirt and no dirt. Impressive :)
Digger on the pink gloves really cool
What happened to the gt350?
What belt do you need
Do you have a discount code from you if we order to HHP?
Doris you're awesome shout out to TJ Stockton cali
Nice Video. I am so excited to see another mod video. Can’t wait and looking forward to next one.
Great vid Doris 🌷
Why don’t you add the spacer for blower to add a chiller, to get lower intake charge air. Especially as hot as it is where you live?
Spacers don't really work the eventually heat soak but I would of gotten the blower ported by jokers #jokerzperformance
Damm Doris you always make working on your car look soo easy even though it’s not! I can’t wait to see how your Redeye performs after you install all the mods!🐟
Doris, i think the covers for the injectors should be painted purple what do you think?
Really waiting for this video on your hellcut.....really awesome work you worked like a pro ....👏👏👏👍🏼👍🏼👍🏼
Alot of fulfillment going on right here!
Best Spark plugs! I used those on my motorcycles as well.
Cheese and Crackers boss!! She's Thicccer than a bowl of southern maple oatmeal. 🤪💅💕
How long did it take? If you already have the smaller pulley why don't you put it on now?... You look happy and beautiful... Thanks for the video... Much love... Stay healthy and safe... thanks Chris for helping
GREAT JOB DORIS!!!!
I'm an old mechanic I love what your doing. I mean really a beautiful woman with skills that is just awesome. I actually look forward to your videos. Thanks Dorace for making an old mechanic smile.
Muchas gracias, me acabas de ayudar mucho con tu video❤
Redeye pulley swap is not the same as regular hellcat as you have now found out 😉
Should scream with the pulley.
We went an easy 9.98 with the same pulley and injectors on 93 octane.
Dor. You are a great woman. always healthy n god bless😇😇😇
Couldn't wait to see you're video
I am amazed by the best knowledge that you provide.
Is that shirt your merch?
Thanks for the info on the tools and can't wait for more on the hellcat red eye.
Nice installation video! That husky ratchet just makew life easier😂💯 have a great day doris.
I am in love with you... I have no idea about cars but I am watching your videos because of your positive energy and your magic smile..
Get it sis and 1000 thousand hp wow 😱😱😱 that's crazy. But Yu did a great job I love Yu ❤️ sis keep up the great work 😘😘😘😘 Dale sis Dale ❤️
Im not sure but I thought the demon had a larger cubic inch supercharger...love the video you are always on point with your info.
I could listen to you for hours
I think the demon does but I don’t think the red eye has that
for more help to your mind you have be costumes all part for example the big one but A1 .. A2..... this simple ad will help you so much😁🎼
Awesome video Doris man this car is gonna be insane 😬 great installation keep up the amazing work 👍💕
I still think it is mind blowing how she remembers all of that.. 😃😃😃👍
Hi doris please share the link of the background song
I like your Redeye HellCat. Thank you for sharing with us your cars and sharing with us your ideas.
Can we just fall in love and live happily ever after lol
Can't Wait.... I've missed you ❤
OMG that shirt!!! 🤣 love the play.
Lil bit to watch of Dorace today ! A lot hell cat .
1000HP HellCat Vs Stangmodes 1000HP GT500????😿😈🐍🐍🐍
Isn’t he the one that watched his boy with another GT500 get walked by a stock demon and didn’t want any smoke.
Any news on the Mustang
The car is going to be pretty nuts when it's all finished.
I can just imagine it. Can't wait.
Really enjoy watching your videos. You have a great deal of knowledge Doris. Really impressive that you do all of your own work 👍🏻
Nicely done i see the catch can is doing a great job too
Are you interested in selling your old stock rotors for the redeye??
great you are very fast with that car congratulations
Smaller pulley, spins faster the next pulley is it even smaller then the one u installed? Have ever thought about buying tools off of tool trucks?
i have been not writing stuff much on TH-cam my yellow ford truck went in the lake to its roof, i just got report the motor broke & drive line failed too after i shut it off, launching my boat! well I hear normal rump then it went quick no lag it was quick backward standard trans failed too i though the gears worked, engine may have been turned with water in it, un able to repair totaled poor me now it chevy time 4x4 auto manual tow package v6 add on stuff air flow & ground effects to Gregg
I'm ready to see you run a Super Stock. Hellkitty throwdown!