Great video man! I gotta question though. When your re-staking the release ramp how tight should it be fitting after. Im concerned it isnt seated well enough. but dont wanna continue just peening at them slots. Dont wanna get it all back together for a test out and grab the clutch and have it all come apart inside. Hit me back id appreciate it.
I would recommend re-staking it and add couple and you should be fine as long as it's good and snug. if it's not sloppy after staking it in you should be fine. best wishes with your project man!
Would have been a better video if the camera was not blurry and focused in properly. I would've put an extra 5/16 nut on the cable for a lock nut for the cable just to help hold the adjustment from vibration or loosening going down the road. While it was off the release ramp assembly.
MrMach12004 I suppose it works both ways man...that Mach 1 you own could convert a hard-core Chevy guy (of which I am one...lol)! fact is, you don't see many of either parked in front of a "shrinks" office. My kinda' therapy!
Hi, I tried to adjust the clutch , because bike would grind going into first gear from a stop. Squeezed the clutch lever and let it go and it wouldn't return. What could be the problem?
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
Good evening sir, I took the primary off. Reset the clutch ramp , barring were hang up. Working great now. Thank you for the video and knowledge.
THANKYOU !!!! your video helped me get the ramp in right and clutch perfect.
How you like the way clutch actuator held in place? How can Anyone be proud of that kind of workmanship?
Agreed…no a fan of it
Nice job of explaining. Good video
Glad it helped ya out!
good stuff...learned something and enjoyed it. Thanks for the video!
vw64manyrd thx Manyrd....glad to return the favor...you are among the sharpest mechanics on the Tube!
RagaMuffyn Garage How do i disengage my clutch on my 1973 ironhead? I watched a youtube video and i think i messed it up even more.......please help
Thanks for the video! Really helped me out!
Glad to hear it man!
Great video man! I gotta question though. When your re-staking the release ramp how tight should it be fitting after. Im concerned it isnt seated well enough. but dont wanna continue just peening at them slots. Dont wanna get it all back together for a test out and grab the clutch and have it all come apart inside. Hit me back id appreciate it.
I would recommend re-staking it and add couple and you should be fine as long as it's good and snug. if it's not sloppy after staking it in you should be fine. best wishes with your project man!
Cool
thx bro.....glad to have it back on the road
Would have been a better video if the camera was not blurry and focused in properly. I would've put an extra 5/16 nut on the cable for a lock nut for the cable just to help hold the adjustment from vibration or loosening going down the road. While it was off the release ramp assembly.
watching and looks like your doing good - T=up - going to 2
Your making me want to buy a Harley! Lol
MrMach12004 I suppose it works both ways man...that Mach 1 you own could convert a hard-core Chevy guy (of which I am one...lol)!
fact is, you don't see many of either parked in front of a "shrinks" office. My kinda' therapy!
You are right about that lol!!!
Hey this really helped me out! Thanks bud!
Screw reading the manual when you have resources like this
What problem were you having that caused you to replace the ramp? Was the clutch not releasing? Did this fix the problem?
jsandidge1 yeah, the clutch wouldn’t release. Thx for watching
I can't quite tell. What is a stake?
Hi, I tried to adjust the clutch , because bike would grind going into first gear from a stop. Squeezed the clutch lever and let it go and it wouldn't return. What could be the problem?
James Wilbur can’t say for sure, I would inspect everything really well including the clutch pack.
Thank you sir
James you’re welcome, wish I could be of more help...thx for watching!
👍
How much oil did you put into the primary and is it shared with transmission?
What would hold case from going on all the way
Not sure Eddie, could be something isn’t seated properly ....wish I could be of more help man.
It's slide up st least half way then stop do I need to adjust the chain maybe it's sloppy
The ram just contest it's has to be pinned but is it a sleeve ring could it be still in hub
@@1968hambone are you close to Indy bro I like watch you I just put a dayna2000 I in at was just get ready and bad to adjust it damn and popped my ram
replace that old clutch with a scorpion clutch
Scorpion how's that price
I would of watch put at on