CLEAR 2020 supra tail lights are back!!

finally someone came out with a clear / smoked lens supra tail light so we are able to do lens swaps again!
www.nextlevelneo.com?ref=ntxglow
valid tails (red, the smoked will be back in stock soon):
ebay.us/3aD7xt
oem tail lights:
ebay.us/xknhoT
ebay.us/rKLtAa
Ultrasonic cutter - amzn.to/46wgTZv
Dremel - amzn.to/2uDjjbO
Dremel Flex Tool - amzn.to/38mRpPV
Dremel Quick Release - amzn.to/2tUUcB2
Dremel Diamond Bit - amzn.to/2uFPmaZ
Plastic & metal adhiesive - amzn.to/37cIwXS
Wire Strippers - amzn.to/39thgWI
Soldering Iron - amzn.to/2SFCw4q
Solder - amzn.to/2HgX7qA
Heat Shrink - amzn.to/38qFyAA
Heat Gun - amzn.to/2UJjwVx
Zep - amzn.to/39pqTpd
RetroRubber - amzn.to/38fmsNz
Impact drill - amzn.to/3bASPbN
Goop adhesive - amzn.to/46kgXuf
Black silicone - amzn.to/3G1uvAd
Buy me a coffee -
www.buymeacoffee.com/ZacCook
Videos Shot on:
Canon Rebel T6 - amzn.to/2SGrCf7
Phone Tri-pod - amzn.to/2HceVTX
Amazon prime 30-day free trial link:
amzn.to/3bsdM8t
*These are all affiliate link, I do get a commission from each purchase made from the links*
#ntxglow

[@nascardrawings7700]

I have great advice for you on cutting the back housings vs cutting where the back housing meets the lens.
For example, I was taking apart a light today, cut about 1/4 inch from where the lens meets the back housing, and while taking it apart the lens cracked. I had other lenses for that same light but they were unusable. I’ll be buying a new lamp assembly to cut open and here’s why. I cut the same light open many times, but no two cuts are ever the same. Even a few millimeters difference throws it off immensely when it comes time for reassembly. It won’t fit right, and then it will require some fabrication. Even after that it won’t be as clean as just cutting where the lens meets the back housing.

[@zaccook]

I think you're right! cutting where the lens meets the housing is the only way to make sure that they have a similar cut

[@joeloax4195]

Just curious, have you ever put silica gel packets inside the housings before you seal them up? I've seen builders do that as an extra precaution to keep moisture out after they are sealed up. They'll put one or two 5 or 10 Gram packets inside.

[@jamesgardner6619]

You're a braver man than me dude. I got asked by an owner here in UK to do this with the clear illumaesthetic lenses, but I chickened out.

[@zaccook]

good thing because they discontinued them haha but this style really wasn't to bad!

[@joeloax4195]

For that glue, i always thought you applied the glue first and then use the spray to cure it. I suppose either way works.

[@zaccook]

I think there’s different ones the instructions on the bottle say spray first so idk 🤷 😭