Vauxhall Insignia P2453 DPF pressure sensor fault fixed

แชร์
ฝัง

ความคิดเห็น • 23

  • @diydaly
    @diydaly  ปีที่แล้ว +1

    New Genuine DPF Pressure sensor - ebay.us/1QXdFL
    New Aftermarket DPF pressure sensor - ebay.us/3KgR6L
    Check out this New Diagnostic machine that will carry out the reset (I have used the machine myself and can recommend it)
    Topdon Phoenix lite 2 Ebay - ebay.us/tsyiTI
    Topdon Phoenix lite 2 Amazon - www.amazon.com/dp/B0B1MB6YG8
    Tools used:
    Socket set - ebay.us/7tUKdM
    Snips - ebay.us/uk6Li3

  • @paris3478
    @paris3478 8 หลายเดือนก่อน +1

    Bonjour.peux tu me dires combien de volts tu trouves sur les connectiques 1 et 3 de la prise.capteur debranché avec contact on.merci

  • @thomashorabin7554
    @thomashorabin7554 ปีที่แล้ว +1

    hi i have an insignia ive just replaced the diesel filter but the but the partical filter blocked message is still on any advise please

    • @diydaly
      @diydaly  ปีที่แล้ว +2

      The particle filter is a section of the exhaust, replacing the fuel filter wont help this issue, you may need it regenerating via diagnostic machine but you also have a different fact causing the issue

  • @duncanbadenock5592
    @duncanbadenock5592 ปีที่แล้ว +1

    Does anyone know the location of the boost pressure sensor for the insignia 2019?

    • @diydaly
      @diydaly  ปีที่แล้ว +1

      Not had any issues with them on the new shape mate , will look into it

  • @Tahsin_Hussain
    @Tahsin_Hussain ปีที่แล้ว +1

    if there is no fault code, is there any signs that the DPF pressure sensor going bad?

    • @diydaly
      @diydaly  ปีที่แล้ว +1

      No as soon as it’s faulty it will log a code , it must be doing it’s job ok if there’s no warning 👍

  • @Tahsin_Hussain
    @Tahsin_Hussain 10 หลายเดือนก่อน +1

    Same code P2453 appeared in my Vauxhall insignia and went into limp mode. Only running at 20 mph even when accelator 100% down.
    Then i did DPF Static Regen with Autel MK808BT Pro. Some Blue smoke came out.
    Then the fault code gone and Car back to nornal, driving in full speed.
    DO I STILL NEED TO CHANGE THE DPF SENSOR?
    I already bought DPF sensor from ebay from Good dealer. Is there anyway to check if they have send me a Good sensor or Faulty sensor? How do i test a new DPF sensor?

    • @diydaly
      @diydaly  10 หลายเดือนก่อน +1

      If it’s driving ok now sounds like the dog was just blocked .. if you do fit it you’ll definelty need to run through the procedure to tell the ecu it’s been replaced or the fault won’t clear

    • @Tahsin_Hussain
      @Tahsin_Hussain 10 หลายเดือนก่อน +1

      @@diydaly I already did it and no fault code now

  • @brady4907
    @brady4907 ปีที่แล้ว +1

    Would this work on a bmw aswell ?

    • @diydaly
      @diydaly  ปีที่แล้ว +1

      The code is likely to be sensor related

  • @Alanw74
    @Alanw74 ปีที่แล้ว +1

    Take it the new Topdon couldn't do the relearn?

    • @diydaly
      @diydaly  ปีที่แล้ว +1

      Yeah I checked yesterday actually and it did have the function to do it but I’d actually prepped this video a few weeks ago .. before getting the topdon mate

    • @Alanw74
      @Alanw74 ปีที่แล้ว +1

      @@diydaly thanks that's good to know 👍

    • @diydaly
      @diydaly  ปีที่แล้ว +1

      @@Alanw74 👍 will be using it in any future vids now but will let you know if there anything it won’t do compared to the snap on , just used it to read wheel speed on an old bmw today and got an injector to code on a qashqai so hopefully it will do that 👍

    • @lovepreetsinghhanjra1997
      @lovepreetsinghhanjra1997 ปีที่แล้ว +1

      Nic video sir
      Your all video very helpful sir 👍👍🙏

    • @trevormansfield6740
      @trevormansfield6740 ปีที่แล้ว +1

      Keep us updated on the Topdon mate. I may get one early next year if you have luck with it.