Tire Repair With Plug Kit - Made easy with tie-down strap
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- This video shows my first attempt with the tire plug kit. I have not cut out my struggles with this, so anyone without experience can see how difficult this can be. I could have cut right to the part where I figured out how to make it easy, but I feel this video is more informative for beginners as they can see the different ways that did not work.
One of the main challenges with this repair is that the nail punctured directly through a steel belt. After creating this video, the same vehicle that this tire came off of got another flat tire. They were all worn and I was waiting until I could afford a full set. The other tire was quite a bit easier to repair, as the object that punctured it did not go through a steel belt. That one only took about 15 minutes to repair, once I got the tire off. That one would have probably been easy enough to repair by hand, but I used the tie-down strap method anyway because it takes most of the work out of it.
I'm sure many people have done this repair before and have had different experiences. Obviously, the more times you use these kits, the better you will get. But, I feel this is informative for people with no experience, and I believe the tie-down strap is extremely help. This method makes this repair possible for people with little strength.
I have had the same problems my first plug setting. I did change tools too
Beneficial video, now I know I shouldn't do it myself leave it for the pros
Hi Luke, It seems you can use some instructions on this and future project on plugging tires.
I'm here to "help you" not to criticize you, so please take it not offensive, but rather friendly.
You made several mistakes from the beginning, making it very difficult and tough on you.
1) When you start to pull out nail or screw from tire. you shouldn't just yank it out ! You should pull it little by little, stop in between steps and determine original angle (direction) nail went in to a tire. VERY important ! Once nail is out your "Reamer" or auger should be pushed in at same angle in same direction nail vent in.... Not strait in as you are trying to do. If nail route is one way, and you create whole different hole with reamer, you will have hard time, because you are creating whole another hole, and most likely you will have leak after completing job because you are plugging hole you created but not original hole that nail did. I hope this make sense and helps you and others who watch your Chanel. Good luck.
Should cut plug rope flush with tire. Those ends, sometimes will dry out by fiction on road and cause leaks.... Just saying. You got lucky this time for not having a leak after repair. Good job.
Thank you. Most of my videos are first attempts, so I know there are probably better ways to do things. But, I usually learn from the things I do wrong as I attempt to follow the directions on the package. In this video, I believe I did pull the nail out slowly and intended to ream the whole in the same direction. However, the information you added is helpful, and I appreciate you taking the time to comment.
Thank you.
You really have to auger it out with the tool. Takes a few minutes but will save you from hammering it. Way to stick with it!
I agree. That was directly through a steel belt, which made it a real pain. I repaired another tire a couple weeks later (on the same vehicle) and it was much easier since the hole was not through a steel belt. But I definitely would have saved myself from hammering if I had spent more time with the reamer.
Reaming the hole is a Pain. Thats why I use a cordless drill, with drill bit the size of shank of seating tool
That's good to know. Seems like they may be able to improve the kit somehow. Another person commented and said I should get the kit with the T-handle reamer. I have not tried that one yet. Hopefully my future does not have many manual tire repairs in it. 😄
@@LukeStensland T handles work a lot better
@@LukeStensland you did mention the rachet tie down! I didn't think of that. Good thinking
Άμα είναι να κάνεις όλη αυτή τη διαδικασία φίλε 20 λεπτά άστο! Αυτό το πράγμα εγώ που έκανες δεν το έχω ξαναδεί ποτέ!😢 Σου έφυγε η Παναγία εκεί!
😂 Η Παναγία δεν με άφησε εκεί. ήταν στο αμάξι και με περίμενε να τελειώσω την επισκευή του ελαστικού. Τώρα ξέρει ότι μπορώ να κάνω την επισκευή σχετικά γρήγορα. 😁
Wow, and a person is supposed to do this on the road?
Probably more likely at a gas station, since you’ll need to put air in the tire. The spare tires that come with your car are typically scary to drive on, and tire shops aren’t always open. This one was especially difficult due to where the nail went in.
That's a good effort but you worked way too hard.
1. That isn't a patch that's a plug. There is a difference.
2. Lose that plug kit it is terrible. Get one that is like a "T" handle, it will make your job much easier.
3. You don't need that plug bond. You can just use the plug without it.
4. You can't ream it too much.
Good to know. Thank you.