In this video we install new 2005-2013 Toyota tacoma Fog lights.f IG @CARSONBOARD If you would like to support the channel checkout the link: carsonboard.bi...
2012 through 2015 takes a completely different kit. I have a 2013 and the kit is AUER Automotive #TTA-312 (halogen) and you can get an LED #TTA-812 also.
On my 06 the back adjustment screw is fixed and doesn't come out with the light. I had to use a short, short Phillips and completely unscrew it before it came out.
My 2012 tacoma didnt have driving lights.It had block off plate in the housing.I bought aftermarket with wiring.The multi switch on the colum is not made for the se to be added.The relay switch and wiring too light duty for my liking.I built my own harness with heavier wire.I just got into the fuse box and did a add a fuse off of the low beam circuit works great.
The back of my bumper does not look like that at all and it's an 06 Tacoma it's completely covered no way to get out the fog lights I wish there was a video that showed how to get at them cuz if I could reach them I could take them out without watching a video at all
I have the same gen Tacoma. Bought spider foglights. Clear lens dark background, led. They were about $100. I have the same wobble issue it doesnt fit perfect.
@@CARSONBOARD Your ebay link says "Fits 2005-2011 Tacoma, 07-13 Tundra Bumper Fog Lights Lamps w/Bulbs+Switch Solara". I have a 2012 Tacoma but from the description, it won't fit my truck?
Do a video on how to remove and replace the headlights please. I’m dreading doing mine and keep puting it off because I’ve herd it’s a total 🧨😩🤬. Thanks
I did 2 videos on that grille and head light replacements and alpharex uploaded head lights. It’s not that bad the hardest on his under the front tire wheel fender
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
Tacoma’s has a minor refresh 2012-2015 the fog lights are different
Yup, I have a 2013 and a kit from AUER Automotive TTA-312 / TTA-812 and the wiring for the install is very different too.
Cheap cheap no good Brot…your truck look good to deserve cheap stuff
This video should be a bulb replacement bulb video, NOT A SPYDER INSTALL VIDEO, it's just someone trying to showoff their truck!
For $30 you can’t beat that 😎,
Great install man 👍👍👍
2012 through 2015 takes a completely different kit. I have a 2013 and the kit is AUER Automotive #TTA-312 (halogen) and you can get an LED #TTA-812 also.
On my 06 the back adjustment screw is fixed and doesn't come out with the light. I had to use a short, short Phillips and completely unscrew it before it came out.
Mines a 13 base model, came prewired for everything, fogs, light bar, back up camera. Gotta love Toyota. Not sure if it’s the same for every year
Hey man! Thanks for taking the time to do this video! Very easy to follow! I’ll be looking for more that you’ve done.
It's been so loong... You should upload more vids... I've always liked your contents... Keep up the good work. Greetings from Belgium!!!
Thanks for the support Ekrem.
Dosent show shit just f up music!
What was the damage to the bumper? Also removing the old light especially the tail nub was nearly impossible.
My 2012 tacoma didnt have driving lights.It had block off plate in the housing.I bought aftermarket with wiring.The multi switch on the colum is not made for the se to be added.The relay switch and wiring too light duty for my liking.I built my own harness with heavier wire.I just got into the fuse box and did a add a fuse off of the low beam circuit works great.
Thank you🙂
Did that wire harness kit come with a fuse or fuse piggy back by chance ?
The back of my bumper does not look like that at all and it's an 06 Tacoma it's completely covered no way to get out the fog lights I wish there was a video that showed how to get at them cuz if I could reach them I could take them out without watching a video at all
Great video and awesome tutorial, will be ordering and changing my fog lights on my 2010 Tacoma. Thanks for sharing brother!
I love the quality of your videos. Very nice, thank you.
Both your floodlight vid don't show fender well removal
I just fog lights on mine. The new ones are very loose.
Good $h!+ where’d you get that funky fresh grill?
@CARS ONBOARD reat video, how are the lights holding up?
Just replaced mine this video helped so much
I have the same gen Tacoma. Bought spider foglights. Clear lens dark background, led. They were about $100. I have the same wobble issue it doesnt fit perfect.
Ok cool its not just me. I was thinking about buying the black one too.
Link to the lights! Please
Hey man how have these been holding up?
Do you have the link?
Love it !
nice video good explaining and cam pictures
You gonna upload the short film on the evo?
What kind of headlight assembly are those?
depo amazon
Thanks
Nice and clear
Couldn't open up the link.
It should work now.
Any link to the Amazon page? I have a 2013.
www.ebay.com/itm/Fits-2005-2011-Tacoma-07-13-Tundra-Bumper-Fog-Lights-Lamps-w-Bulbs-Switch-Solara/172492598583?fits=Year%3A2006%7CModel%3ATacoma&epid=26002638629&hash=item28295c2d37:g:absAAOSwRE5aXmcF
@@CARSONBOARD Your ebay link says "Fits 2005-2011 Tacoma, 07-13 Tundra Bumper Fog Lights Lamps w/Bulbs+Switch Solara". I have a 2012 Tacoma but from the description, it won't fit my truck?
Firme!
Nice truck, looks much better with new lights with clear lens. I like the kit also includes the OEM switch and wiring if you need it.
Do a video on how to remove and replace the headlights please. I’m dreading doing mine and keep puting it off because I’ve herd it’s a total 🧨😩🤬. Thanks
I did 2 videos on that grille and head light replacements and alpharex uploaded head lights. It’s not that bad the hardest on his under the front tire wheel fender
@@CARSONBOARD ok. Thx
I was able to remove them with my fingers. No screw driver needed.
I must be weak. I cant get them off.