Tried and tried to get the DT4R to pair… Decided to sleep on it and try again… Tried again and boom worked first time…Yes it was user error 😊 Thanks Sir, great video 👍🏼 Just need another to how to set the timer etc…
I found that i need to get very close to my relay box to pair it with the DT4R thermostat, which seems to be the opposite of what you stated. It now is working but I found it a bit odd that it didn't pair at 2m distance.
I have two wired DT4s one floor of the house and one wired on another. I would like to change this one to a wireless so I can site it more efficiently. Is this possible or will the system get confused? Thanks for any advice
Hi. I’d like to pair one thermostat downstairs and one upstairs to the same BDR91 box. Do I just do the same process for each thermostat or if I do this process for the second thermostat would it clear the first one? Tia
If you use the same process as in the video, you will delete the first one. You don’t normally pair more than one thermostat to a BDR91 but if you really wanted to, then once the first thermostat is paired, simply hold the BDR91 button for 5 seconds to get the slow flash again then pair the other thermostat in. Tech support is on 0300 130 1299 if you need it.
Hi (again), we have a single dying CM927 thermostat paired to a BDR91 receiver for a gas boiler. Is it possible to simply replace with DT4R as shown here?
You cannot program the DT4R so you are looking at one of these options to replace a CM927 - th-cam.com/video/mlh4-WILyUo/w-d-xo.htmlsi=hCBNggneAy_F8Yfe
No, T6 is a Ramses 3 protocol thermostat so only works with the R6H receiver ( www.resideo.com/gb/en/products/comfort/thermostats/thermostat-accessories/r6h911rf4018-2-channel-wireless-receiver-box-r6h911rf4018/ ).
Superb videos as always ... thank you.
Tried and tried to get the DT4R to pair… Decided to sleep on it and try again… Tried again and boom worked first time…Yes it was user error 😊 Thanks Sir, great video 👍🏼 Just need another to how to set the timer etc…
I found that i need to get very close to my relay box to pair it with the DT4R thermostat, which seems to be the opposite of what you stated. It now is working but I found it a bit odd that it didn't pair at 2m distance.
The wireless signal should work 30 meters away, so I find this strange. Paired many DT4R's here and all have paired in at 2m or more.
Nicely done.
Hello thank you for this vidéo!
IS the same iS possible with the dt3?
I cannot say that it is. We only sell the DT4.
Thank you. Really helpful video that worked a treat 😊
Hi. Great video. Thanks for posting. Can you pair a wireless T4R with the same BDR91 receiver do you know please? Many thanks. Mark
Hi Mark, a BDR91 has 4 memory slots, so you could pair multiple compatible Ramese 2 thermostats to it, but not a T4R as this is a Ramses 3 product.
Thanks. That's super helpful
I have two wired DT4s one floor of the house and one wired on another. I would like to change this one to a wireless so I can site it more efficiently. Is this possible or will the system get confused? Thanks for any advice
You can, but bear in mind the DT4 is only a 2 wired connection so you would have to have this appropriately wired to accomplish this.
Hi. I’d like to pair one thermostat downstairs and one upstairs to the same BDR91 box. Do I just do the same process for each thermostat or if I do this process for the second thermostat would it clear the first one? Tia
If you use the same process as in the video, you will delete the first one. You don’t normally pair more than one thermostat to a BDR91 but if you really wanted to, then once the first thermostat is paired, simply hold the BDR91 button for 5 seconds to get the slow flash again then pair the other thermostat in. Tech support is on 0300 130 1299 if you need it.
Great video
Hi (again), we have a single dying CM927 thermostat paired to a BDR91 receiver for a gas boiler. Is it possible to simply replace with DT4R as shown here?
You cannot program the DT4R so you are looking at one of these options to replace a CM927 - th-cam.com/video/mlh4-WILyUo/w-d-xo.htmlsi=hCBNggneAy_F8Yfe
If I have a receiver already bdr91A not just 91 can I just swap the wireless thermostat
The BDR91A is just a variation of a BDR91 so will work the same with this thermostat.
Does the T6r work with that receiver doyou know please?
No, T6 is a Ramses 3 protocol thermostat so only works with the R6H receiver ( www.resideo.com/gb/en/products/comfort/thermostats/thermostat-accessories/r6h911rf4018-2-channel-wireless-receiver-box-r6h911rf4018/ ).
@@MWPHS thank you. I'll be sure to get the complete package to replace the T3r.
Thanks for replying 🙂
bO stands for "bonding"😅
Its never been that clear to be fair... BO, CO, HC, who knows! :)