Attention, Attention, Whoop, Whoop! (Fire Alarm A/V Test) [10-17-2024]

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ธ.ค. 2024

ความคิดเห็น • 21

  • @aidanthetoiletelevatorfire7554
    @aidanthetoiletelevatorfire7554 13 วันที่ผ่านมา +7

    Code 3 tone is my favorite for these

    • @SportyTrainGuy
      @SportyTrainGuy 12 วันที่ผ่านมา

      Same

    • @stampynate0007
      @stampynate0007 12 วันที่ผ่านมา

      Code 3, normal whoop, slow whoop are my personal favourite

  • @Sirietta03Official
    @Sirietta03Official 9 วันที่ผ่านมา +1

    i gotta love the slow woop, really, the best thing, and the albany voice evac, truly historic

  • @GaryBeltz
    @GaryBeltz 13 วันที่ผ่านมา +5

    It's interesting that there are some speaker-only units. Are those in some of the rooms? Wouldn't it be a violation if they were in the main hallways?

    • @bjthedjdutchdude1992
      @bjthedjdutchdude1992 12 วันที่ผ่านมา +1

      Probably had enough strobe coverage but not enough sound. This also happened at my school. Each hallways had 6 Integrities. 4 were horn strobes, 2 were horn only's

  • @johnramos9724
    @johnramos9724 10 วันที่ผ่านมา +2

    I’m scared the Fire Alarm at my school :( 0:19

  • @NewEnglandAviaton987
    @NewEnglandAviaton987 5 วันที่ผ่านมา

    My school has these and MTS on slow whoop

  • @JKTEAS
    @JKTEAS 9 วันที่ผ่านมา

    Nice

  • @blose774
    @blose774 12 วันที่ผ่านมา +1

    Intresting how there is a speaker without a strobe.

  • @davidbian2466
    @davidbian2466 13 วันที่ผ่านมา +1

    Was the announcement that you made prior to the start of the test also played through the fire alarm speakers?

    • @ZDC2002
      @ZDC2002  12 วันที่ผ่านมา

      @@davidbian2466
      It was indeed. It was played out of those speakers as I made the announcement from the FACP and it’s pager is connected to the amplifier that plays the whoop tone and evac message. On voice evac systems we typically do pre-test announcements so anybody in the building that early in the day won’t be to startled.

  • @kansasstatealerting2874
    @kansasstatealerting2874 11 วันที่ผ่านมา

    I didn't know that Tuvok voiced the fire alarms!

  • @firealarm421
    @firealarm421 13 วันที่ผ่านมา +2

    Was the dialer disabled for this test

    • @ZDC2002
      @ZDC2002  13 วันที่ผ่านมา +3

      It was not.
      Per code, you cannot disconnect or bypass the dialer as that is considered tampering with the system even for someone working in fire alarm, the system must be placed on “test mode” with the monitoring company which means for an allotted timeframe, they ignore all signals and don’t send the trucks.
      They still receive signals from the dialer but their computers remind them to ignore the signals until the system is no longer on test a.k.a back online.

    • @SadioY
      @SadioY 17 ชั่วโมงที่ผ่านมา

      😅 2:40 tjgogo

  • @josephfrye7342
    @josephfrye7342 11 วันที่ผ่านมา

    I guess the problem is the camera effing hates picking up the xenon strobe flicker rate.

  • @Maxშემიწყალე
    @Maxშემიწყალე 12 วันที่ผ่านมา

    wait so does inserting the key to the fire alarm make it so it doesn't spray your hand with red ink?

    • @soda_coir7595
      @soda_coir7595 12 วันที่ผ่านมา +3

      They dont ever do that, thats just something people say to scare others into not pulling it.
      The key is to open the station to reset it or unscrew it from the wall.
      You can key active pulls as pulling the handle or opening it with a key releases the button inside. So sometimes inspectors just key activate them, or do so if they have a break rod in them.

  • @Talonicipaint
    @Talonicipaint 7 วันที่ผ่านมา

    I’m so sad 😭

  • @filmer765
    @filmer765 11 วันที่ผ่านมา

    My campus has the same system literally in every building. Nothing new, nothing to see here.