Very informative...saw the same one on e-bay for $12 bucks, going to jump on it! Already checked my TaoTao and my connections are already there! Just plug and go!
a massive thank you after watching your video and seeing that plug with the looped wire i stopped using my brain cells to figure out how to wire the alarm and it took seconds instead of hours ............!!!!!CANT THANK YOU ENOUGH SERIOUSLY!!!!!!!!
I got my alarm hooked up today. It's obnoxiously loud and sensitive. Sadly the remote start doesn't work exactly right. I still would recommend this alarm to anyone with a motorcycle or scooter.
That Guy Awesome! Mine still works but I have to say that I don’t like the remote with a built in key. On my scooter it sticks straight out where my knee could break it off. I use the remote and factory key setup.
@@harrysgarage5039 yeah I just use the Remote key to open my locking seat so I don't have to turn the engine off I have a flatslide carb and it has to be choked on cold days so I just use it to get to my carb
I actually wouldn't Recommend a flat slide unless you intend to bore up by the way, Because It gets maybe 1+ mph and its a little tricky getting them tuned right
Hi, I just ordered this, and I would like to know if there are settings for the sensitivity, I need it low, because in front of my house passing all the time guys with really loud music or loud exhausts.
Thanks for this video. I just bought a very used scooter with this system and will more than likely reverse what you did to delete this system. My scooter will not start with the key, it will only start with the remote. Does yours do this since the install?
Duncan here is the link. BlueFire Motorcycle Security Kit... www.amazon.com/dp/B01HTGWYBA?ref=yo_pop_ma_swf Also mine does not bog when going up to speed. Do you have a stock setup or have you made any mods to your air intake? If you have made mods to your air intake without adjusting the carb or rejecting this may cause this. You could have a dirty carb as well. What kind of scooter do you have? What model engine?
Duncan, I had a tao tao Paladin 150. t would bog down at times. I did some reserch and was advised to replace the spark plug wire with a better brand equivalent. I replaced my spark plug connector with a Nippondenso spark plug connector and it got better. You may have to up grade some parts as you can afford to, to improve the performance/ operation of the budget conscience scooter.
If your talking about the 9v connector, my unit didn't come with one, there was a place to put one on the board, but they didn't install one, so, probably not a requirement.
![[ไฮไลต์] ฟุตบอลชาย อาร์เจนติน่า vs โมร็อกโก รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/wE6uYH0yyzM/mqdefault.jpg)
Thank You soooo much! I’ve been searching TH-cam for an install video on a Chinese scooter.
Very informative...saw the same one on e-bay for $12 bucks, going to jump on it! Already checked my TaoTao and my connections are already there! Just plug and go!
a massive thank you after watching your video and seeing that plug with the looped wire i stopped using my brain cells to figure out how to wire the alarm and it took seconds instead of hours ............!!!!!CANT THANK YOU ENOUGH SERIOUSLY!!!!!!!!
Glad I could help!
Quick and easy. Thanks for the video!
Thumbs up. Thanks for posting this video. I'm about to order an alarm for my vip. Today was my first day riding and the thing does 50 mph.
I got my alarm hooked up today. It's obnoxiously loud and sensitive. Sadly the remote start doesn't work exactly right. I still would recommend this alarm to anyone with a motorcycle or scooter.
I just Bought one for my Scooter! Waiting for it to arrive, This is a great video it deserves more views!!
That Guy Awesome! Mine still works but I have to say that I don’t like the remote with a built in key. On my scooter it sticks straight out where my knee could break it off. I use the remote and factory key setup.
@@harrysgarage5039 yeah I just use the Remote key to open my locking seat so I don't have to turn the engine off I have a flatslide carb and it has to be choked on cold days so I just use it to get to my carb
I actually wouldn't Recommend a flat slide unless you intend to bore up by the way, Because It gets maybe 1+ mph and its a little tricky getting them tuned right
Good video, keep up on the maintenance videos to grow the channel.
Kachi's Kid Hey thanks! I plan to make more for sure.
Remember folks, he did it with one hand
Hi, I just ordered this, and I would like to know if there are settings for the sensitivity, I need it low, because in front of my house passing all the time guys with really loud music or loud exhausts.
Did you break any part of the front end bracket, when you were trying to pull of the head unit??
Bro that’s a nice beard
Hi
That plug on your scooter where alarm control box connects, is it standard on all scooters.
🤔🤔🤔
do you know if it will fit on a piaggio zip
Is it the same on my 2014 vespa sprint?
Hi cool video does all scooters have this Connection for a remote start or does anyone know if a gilera runner sp has this
Thanks for answers
Do you know if this will fit on a ruckus?
what was it you unplugged and plugged into?
will this alarm work on explore eu4 scooter
Will this work on a genuine roughhouse 50
China alarm on vespa sprint ?? Can i dot it
I dont have that green cable he unplugs does anyone know where i can put it in so it can start with the remote?
Please do not know if the Kentoya Phénix 125 has the same connection
Thank you
What was the name of the kit you use
After installing the alarm I can now just start my scooter with no key..I just push the starter button on my scooter..Does this happen for you?
Thanks for this video. I just bought a very used scooter with this system and will more than likely reverse what you did to delete this system. My scooter will not start with the key, it will only start with the remote. Does yours do this since the install?
No
Can u put the link of where u get the system from?
Where dose that black wire go
I have a VGA n1 but I can't find video to install on that scooter
Does your tao tao have bogging problems when going up to speed? also what is the link for this?
Duncan here is the link. BlueFire Motorcycle Security Kit... www.amazon.com/dp/B01HTGWYBA?ref=yo_pop_ma_swf
Also mine does not bog when going up to speed. Do you have a stock setup or have you made any mods to your air intake? If you have made mods to your air intake without adjusting the carb or rejecting this may cause this. You could have a dirty carb as well. What kind of scooter do you have? What model engine?
Duncan, I had a tao tao Paladin 150. t would bog down at times. I did some reserch and was advised to replace the spark plug wire with a better brand equivalent. I replaced my spark plug connector with a Nippondenso spark plug connector and it got better.
You may have to up grade some parts as you can afford to, to improve the performance/ operation of the budget conscience scooter.
Where can I find this? Send a link...please
What is the name of the sysrem or the link to it
I hear these drain your battery down
Will this work for mine
I have the same remote start but it doesnt fit in my peugeot vivacity :( that scooter dont have that cable
katmoortje conect straight to battery
Few years late in the comments 😅 has anyone done this and ran into battery issues? (Dead battery) just wondering
Do i need to put on a battery on it?
Yes you will need a battery for this to work.
If your talking about the 9v connector, my unit didn't come with one, there was a place to put one on the board, but they didn't install one, so, probably not a requirement.
If you dont have a prewired connector, check this th-cam.com/video/tMPzJSAYVtI/w-d-xo.html
IT DOES NOT WORK ON ALL MOPES BE CAREFULL.