Aquasure Harmony Series Installation: Whole House Water Softener Guide
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2024
- Eliminate hard water problems with the Aquasure Harmony Series Whole House Water Softener! In this comprehensive installation guide, we show you the proper steps to install the Harmony Series Water Softener in your home, ensuring your entire family enjoys the benefits of soft water. The Aquasure Harmony Series prevents the wear and tear of limescale buildup in all water-dependent appliances while being gentler on hair and skin. With mineral-free softened water, soap and shampoos lather like they’re supposed to, leaving no filmy residue after washing. Softened water also enhances the cleanliness of laundry, keeping fabrics brighter, more vibrant, and longer lasting.
This video covers installation for all Harmony Series models: 36,000 Grains, 48,000 Grains, and 64,000 Grains. Follow our expert tips to achieve perfect soft water in your home.
Aquasure Whole House Water Softener is available at: aquasureusa.com/pages/water-s...
Learn more about Aquasure at: aquasureusa.com/
Don't forget to like, share, and subscribe for more helpful guides!
Time Stamps:
00:00 - Introduction to Aquasure Harmony Series Installation Guide
00:20 - Essential Tools and Preparation for Water Softener Installation
00:53 - Inspecting Aquasure System Components
01:00 - Ideal Placement and Power Requirements for Aquasure Water Softener
01:18 - Step 1: Shutting Off the Main Water Supply for Installation
01:41 - Step 2: Mounting the Aquasure Control Valve
02:59 - Step 3: Connecting the Aquasure Harmony Water Softener
04:08 - Step 4: Connecting the Brine Tank to Aquasure Softener
04:34 - Step 5: Powering On the Aquasure Control Valve
04:58 - Step 6: Flushing and Testing the Plumbing Lines
05:35 - Final Steps and Benefits of Aquasure Soft Water
-----------------------------------
🔔 Subscribe to Aquasure: / @aquasure
Never miss a deal again! Sign up for our newsletters! 👉 bit.ly/43bRPEX
Follow us on Instagram: / aquasureusa
Follow us on TikTok: / aquasureusa
Follow us on Pinterest: / aquasureusa
Like us on Facebook: / aquasureusa
-----------------------------------
#Aquasure #BestWaterSoftener #HomeImprovement #HardWaterSolution
Aquasure Harmony Series Installation: Whole House Water Softener Guide Video produced by Aquasureusa.com. - แนวปฏิบัติและการใช้ชีวิต
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
Please read and consider the following before beginning the installation:
1. Purchase and plug in a "Surge Protector" in the electrical outlet you will be using for your new ($450 - $1200) water softener to protect it
2. Place "five gallons" of water in a CLEAN five-gallon bucket (you have one right? No, go get one or more b4 proceeding) also fill up the cat & dog bowls and other buckets you have cuz your water will be shut off for who know exactly how long and you might need the water to flush toilets. Also, if you don't have experience with plumbing and are going to install this yourself, consider having everyone in your family take a bath/shower before you begin and don't start the installation on a Sunday as many hardware/plumbing stores close early.
3. you can now perform the steps in the video
Very useful advice, saving some from being nagged at. I never thought about the surge protector until owning a home/paying for appliances.
How much would a plumber charge for an installation like this ball park estimate?
@@jermainejohnson3739 $500 in Vegas (20/20 Plumbing) Now that I know what it looks like, I'll DIY next time.
You sir were awesome! No small talk, just needed info. Thank you!
Thank you! Figured it out today; could not find that in manual! I use military time quite often!
I like the way their unit hooks up to the water source and with their bypass value they have a better system than the Kenmore, Rheem and the A.O Smith units.
agree, this is a much better connection going into the water softener
Thanks 👍
install went as easy as this video ......Thanks!
Having an issue screwing in the mount head into tank, I did not lubricate threads, seems like mount head not right size ? Did u have any issues ?
I live in an RV, can this be installed on the outside of it uses hoses instead of pipes?
Does this require any additional plumbing stuff to be purchased?
If you're going to put a bypass into the plumbing, do I still need to use the factory bypass valve. It looks like it comes apart so that I could just put the inlet/outlet npt fitting directly on. This would reduce my plumbing profile.
What size are the pipes going in and put
Now the +uestion is how u run the water forbin and out of the softner?🤷
Good instructions. I wish there was more detail about installing the brime tank. What is the max distance between the tank and the WS?
Thank you! Most of the components was preinstalled in the brine tank, so there's only a few things that the installer need to do for the brine tank. In terms of the max distance between the brine tank and the water softener, we don't recommend going over 10ft since the longer the distance of the tube, the more time it may need to draw the water during a system regeneration. We supply 5ft of brine tube by default.
Why doesn’t your website work? Trying to get to your homepage but it errors out every time?
I'm confused with the drain line. My loop has a copper drain line to connects to my laundry room on the other side of the garage so I bought a 1/2 to 1/2 shark bit connector but the inner diameter of the supplied drain line doesn't fit into the line support of the shark bite fitting. It's smaller than the support but removing the support the outer diameter is smaller than the fitting. Comparing it to some actual 1/2 pex I have lying around the supplied drain line is a bit smaller and the tubing I had lying around doesn't fit the control valve.
Its 1/2" OD that they're talking about. 3/8" pex has 1/2" OD, that's what I used. 1/2" pex has 5/8" OD.
You didn't show how to connect the water supply lines ?
I have an under the sink filter for cooking/drinking. After installing this system do I still need it? Thanks!
have your water tested for "hardness", many places will do it for no charge or you can goole "water hardness map and enter your zip code. water softeners (like this one) remove the minerals that make water "hard", that test result will determine if you should consider a water softener.
If you plumbing is like mine, my plumbing company told me the softened water supply only go to bathrooms, kitchen sink, washer dryer, and water heater. You would still continue to periodically replace under sink filters.
Is it ok to drain into a sump pump or will the brine water rust the pump?
It won't hurt the pump, but it will kill any grass or flowers where it discharges outside.
it might damage the pump, salt is very corrosive
Can it be installed outside of house in Texas? I had system installed outside, and want to replace it w Aquasure.
We don't recommend installing the system outside. If outside installation is a must, we recommend building a shed or provide necessary protection against the elements.
Flex connectors DO NOT require telflon tape! 🤣
The 3/4 supply lines has their own rubber gasket
I can not find the time designation for AM or PM?
The clock is set to military time which is a 24 hour clock. For setting an afternoon time, you will need to add 12 on the hour.
Is the unit able to discharge water vertically? I have a drain line right above where I plan to put the unit but no floor drain nearby.
How will it drain if it has to go up gravity goes down
@@ToddtheLoneDroner It's not gravity fed. The manual states you can run it overhead.
Does the resin come with the system?
Mine did
what is the size of the stainless steel hose ?
size to fit male 1 inch NPT
Do yourself a favor and get one inch flex tubes for the inlet and outlet. I tried to do it with a screw on pex adaptor and no matter what I did it leaked. Teflon tape and pipe dope are no match for this connection for whatever reason. Had I started with a flex pipe I would have been done in an hour rather than the 3 freakin days I spent wrestling pex pipe on and off because it kept leaking. I'm stubborn but there's something about the thread taper and plastic material than makes it very hard to get a seal without a gasket to seat.
I don't quite understand why they want 8 to 12 turns of teflon tape for a flex pipe. Maybe as a secondary failsafe if the gasket fails. But I'm here to tell you that tape isn't going to work though it may slow a leak. These threads don't mate well with teflon tape at all.
Great tip
@@onenikkione yes it’s compression
Having the same problem here. Trying with Pex/brass adapter. Drip, drip, drip.. Too bad they don't just make a manifold option with pex connectors.
Can the drain line be run overhead
That would work when gravity starts to go the opposite way otherwise it's not gonna work
Manual says yes it can.
What about the damn sediment filter
8-12 wraps on threads with a flex line with a gasket connection makes no sense.
@Ben Seen if the gasket wears out the Teflon won’t stop a leak on the tube side where the gasket is
So why are you watching a how to video then???
Agreed 3-4 is plenty to ensure a good fit. that much Teflon is going to cause most people to cross thread it considering its plastic.
Even worst, that much could cause the plastic to crack!!
First!
If you have questions after seeing this video, read the manual. If you still have questions, hire a professional plumber. Just my advice based on experience.
Anyone else having problems gettinf the bead basket in? I can insert it but the counterclockwise lock is fighting me, and im worried too much force will break rhe plastic
I just did mine…just kept working at it and all of a sudden it worked.. good luck
@@raysmusic49 according to the manufacturer, they had a problem with one of the molds. They sent me a new one and it went in perfectly the first time
@@Tyani-sz6cg how is the softner working?
@@raysmusic49 great! Been running flawlessly. No more hard water stains on dishes and clothes are a lot softer. Great system thus far.
@@Tyani-sz6cg thanks!
Why do they not mention you can use 1" PVC pipe
Most people have copper or pex, rare to use PVC for supply. PVC and ABS are usually just DWV
do we need to flush the bottle with water before installation
You do not need to flush the resin tank with water before installation. However, we do recommend follow the system startup section of the owners manual before letting the water go into the system.
Having hard time getting the basket to fit in. 😑
We are sorry that you are having issue with the installation. Please feel free to contact our customer support at support@aquasureusa.com or 1800-661-0680 during our normal business hours.
Ummm, how about showing how to plumb it to a water supply line???? Wouldn't that be helpful??? Yea, I get it.....you don't want to take any responsibility since every situation may be different and you rather not go down that road.
@rvvrn ummm 3:25
@@RLDoingAllSortsofStuff ummm NO. Screwing flex pipe to the actual softener isn't plumbing.
I was wondering the same thing, I have a soft water loop pip. in my garage, looks like I need to cut it in order to connect the pipes?
Music is too damned loud... Aargh