Installing Lower Control Arm Relocation Brackets on my Mustang GT! (Needed for Lowered Car!)

In this video I show you the process of installing a set of BMR lower control arm relocation brackets. If you have lowered your car, chances are there are key pieces of your suspension that are now in need to adjustment. Most Mustang's have a live rear axle, how they keep the axle movement in check is up to control arms and panhard bar. When you lower the Mustang this messes up the lower control arm angle. With this kit you will be able to correct the angle. Benefits are better traction on launches and less wheel hop.

[@JoseMoreno-fd5of]

I had a question where did you place your jack stands while putting on the relocation brackets ?

[@HooperWest]

Love the ROUSH Wheels! 👍

[@billymanilli]

Did you do anything with your uppers?

[@octane2099]

if you bolted the control arm to the most top hole would that lower the car?

[@JuryRigGarage]

No the lower control arms don't affect ride height. Although if you are lowering your car, you will want the adjustable brackets as it will affect the lower control arm angle and increase wheel hop

[@octane2099]

@@JuryRigGarage makes sense thanks

[@negativesplits06]

Bro, how did you get the panhard bar bolt through the bracket? I’m having trouble with that part. The hole on the bracket seems too high, and it’s now allowing the panhard bar bolt to fully go in. I’m gonna call BMR on Monday.

[@JuryRigGarage]

Unfortunately it takes a lot of adjustment. I have an adjustable panhard bar so I had to extend it to reach (in your case it might need to be shortened)

[@Hardwaretuned]

@@JuryRigGarage when tightening the bolt going through the control arm is it possible that the bracket can bend if u tighten too much. One of my brackets on the car is crooked from the last owner and I’m trying to see if they just went medieval on it.

[@dogsandcars202]

Should’ve got red!

[@karar2294]

Hell yeah brother😎

[@crazyhorseracing6130]

Do you have the part number? Thanks!

[@nahhh5318]

Might just be dumb but he's installing a relocation kit for a 3link lower bar, could just get adjustable lower links and do the same thing couldn't you? Anyway I'm looking for double wishbone lower control arms, BOL.

[@JuryRigGarage]

The relocation brackets fix the geometry of a lowered Mustang and overall improve traction. They serve different functions.

[@BrandonCockridge18]

Thanks for this video bro

[@JuryRigGarage]

You’re welcome!

[@yazan_5.049]

What’s all done to your rear suspension?

[@JuryRigGarage]

I have roush stage 2 rear suspension which includes 1” lowering springs and custom shocks. I also have at the time of filming BMR rear upper and lower control arms and adjustable panhard bar plus support. I recently replaced the lower control arms with adjustable UMI lower control arms and will be replacing the upper control arm and bracket with UMI.

[@alexvaladez7584]

yo can you link your rear sway bar plss

[@JuryRigGarage]

It's the Roush stage 2 sway bar, not sure they make it anymore

[@jgperformance6589]

Could you help me I cant find the pin for the nuetral safty switch to wire in the quick 6

[@thatorangez06_23]

Do you have Instagram?

[@JuryRigGarage]

Yep! @Jury_Rig_Garage