and i dont know if that could play a factor to where the mower pull cord isnt able to move and when he used it he had the blade on and he lost his balance and causing the mower to fall off of the sidewalk and it fell right on top of the curb and i dont know if that could cause the pull cord to seize up and idk if the motor just seized up or if the transmission ties into starting the motor, im a newbie at the small motors game but if you could help me out with this i gladl appreciate it thanks
i have the same model lawn mower and i was wondering if you can help me with a problem that i have, so yesterday i was mowing the lawn and i had to move something out of my way and i let go of the blade control and as soon as i did that my mower just shut off by itself so i went to go pull the pull cord and the pull cord would even move like as if it was seized up or something and i noticed before that happend it was moving slower and the day before that one of my workers hit against the curb
Thanks for a great video. I liked that you demonstrated overcoming a disassembly problem. I have a HR217 that screeches loudly when started but quiets down completely when the blade is engaged. forward motion and blade engagement are normal. Any suggestions before I start tearing it apart? Art Freed.
rust isnt an issue here in texas but im shure it is near the ocean.....most of the decks i replace are just from being plain worn out (dirt blasting) commercial guys use the hondas and get 8+ years of service from them with very little care....if a man would pay attention and fix the nickel dime stuff right away rather than wait till somthin major breaks the hrc216 should last a home owner a lifetime in my opinion
Having trouble removing the center bolt so I can remove the clutch, when I go to remove the bolt the whole engine turns with the bolt thus not allowing me to remove the clutch assembly thanks in advance for any hints.
Nice video, Jeremy. On my Harmony HR15, the blade engagement kills the motor unless I start up with the clutch engaged. I can release the blade but when I pull the clutch back in the motor dies. Ideas? Thanks.
Love your videos! Especially now as an owner of a HRC216HXA...What would you recommend if I wanted to touch up the deck? Whats the deck color called? I cant find a part number for the paint... Also have you seen any HRC216 rusted decks? I am used to Toro and Exmark that have aluminum decks but a little worried about rust and Honda's steel decks.
Jeramy, i have a honda 215hr and when i put it in drive it doesn't go forward. the drive shaft turn when the engine is on, but when I lift up on the mower the wheels will turn, but not strong enough to move the mover? what can i do. Mike
When to PartsPitStop website added 3 small parts to my cart a bolt (0102-VG3-000) and 2 nuts (61304-958-003) part total was $5.75 shipping was the most expensive I have ever seen $17 for ground to New Orleans . No option for USPS, could have gone first class, under 13 oz.
He should have also replaced the 2 nylon bushings in the clutch disc at the same time. The ones in the video were worn out. They make a loud clanging sound when worn out and the pins on the blade holder will hammer the clutch disc if the nylon bushings are gone.
LOL, you can cut about ten inches off your hammer handle. Might as well lighten the load if you ain't gonna use it. Hey just joshing - your vids are great, keep 'em coming.
i love watching your videos you screw up and show how hard it is to repair mowers other people cut that part out THIS IS REAL LIFE REPAIR
Great video! I just picked one up, a 215 with clutch issues and this video will be very helpful!😊😊😉
WHich two jar puller is this? It looks awesome.
and i dont know if that could play a factor to where the mower pull cord isnt able to move and when he used it he had the blade on and he lost his balance and causing the mower to fall off of the sidewalk and it fell right on top of the curb and i dont know if that could cause the pull cord to seize up and idk if the motor just seized up or if the transmission ties into starting the motor, im a newbie at the small motors game but if you could help me out with this i gladl appreciate it thanks
i have the same model lawn mower and i was wondering if you can help me with a problem that i have, so yesterday i was mowing the lawn and i had to move something out of my way and i let go of the blade control and as soon as i did that my mower just shut off by itself so i went to go pull the pull cord and the pull cord would even move like as if it was seized up or something and i noticed before that happend it was moving slower and the day before that one of my workers hit against the curb
Do you have a video on a Honda HRR blade clutch replacement? Looks easy but your video's are great.
Need ADVICE CONVERTING HONDA SELF PROPELLED ENGINE
AND PUTTING IT. ONCRAFTMANS PUSH MOWER FRAME
Great video....is this same set up on hrx 217 k5hyaa?
youve done like 3 or 4 repair videos on this mower recently, is it all at the same time
Hello, do you have a video changing Blade Brake Clutch on a John Deere JX75?
Thanks for a great video. I liked that you demonstrated overcoming a disassembly problem. I have a HR217 that screeches loudly when started but quiets down completely when the blade is engaged. forward motion and blade engagement are normal. Any suggestions before I start tearing it apart? Art Freed.
YEAH ESPECIALLY WHEN THEY MOW THICK WET HEAVY GRASS ALL THE TIME.
rust isnt an issue here in texas but im shure it is near the ocean.....most of the decks i replace are just from being plain worn out (dirt blasting) commercial guys use the hondas and get 8+ years of service from them with very little care....if a man would pay attention and fix the nickel dime stuff right away rather than wait till somthin major breaks the hrc216 should last a home owner a lifetime in my opinion
Having trouble removing the center bolt so I can remove the clutch, when I go to remove the bolt the whole engine turns with the bolt thus not allowing me to remove the clutch assembly thanks in advance for any hints.
Impact guns/drivers solve these problems in most cases
Nice video, Jeremy. On my Harmony HR15, the blade engagement kills the motor unless I start up with the clutch engaged. I can release the blade but when I pull the clutch back in the motor dies. Ideas? Thanks.
Love your videos! Especially now as an owner of a HRC216HXA...What would you recommend if I wanted to touch up the deck? Whats the deck color called? I cant find a part number for the paint...
Also have you seen any HRC216 rusted decks? I am used to Toro and Exmark that have aluminum decks but a little worried about rust and Honda's steel decks.
do these clutches ever wear out? or the ones from the 80s anyway
My Honda clutch is broken. I tried unscrew bolt in the middle one it won't come out. How I can I unscrew it?
impact wrench is your best friend here
MILWAUKEE IMPACT 3/8
amzn.to/3MF5DSX
MILWAUKEE 3/8 SOCKET SET
amzn.to/3WemAH1
Cool
My hrc216 clutch slip every time I got to much grass is it normal
awesome intro!
me neither....they are def no bueno
My blades stay engaged... any help
Jeramy, i have a honda 215hr and when i put it in drive it doesn't go forward. the drive shaft turn when the engine is on, but when I lift up on the mower the wheels will turn, but not strong enough to move the mover? what can i do. Mike
brass gears in trans are worn out....pull bottom plate and you will see tons of metal filings in oil
Can you make a video of your shop?
I have a hrd 536 and the blade just keeps on going even when I let go of the handles
When to PartsPitStop website added 3 small parts to my cart a bolt (0102-VG3-000) and 2 nuts (61304-958-003) part total was $5.75 shipping was the most expensive I have ever seen $17 for ground to New Orleans . No option for USPS, could have gone first class, under 13 oz.
He should have also replaced the 2 nylon bushings in the clutch disc at the same time. The ones in the video were worn out. They make a loud clanging sound when worn out and the pins on the blade holder will hammer the clutch disc if the nylon bushings are gone.
A little BP Blaster would have been a lot of help.......to get the stuck part off.
Good Show MM1. Truthfully, I dont know why guys buy these Blade Clutch mowers. As far as Im concerned all BBC units are, how do you say it, No Bueno!
LOL, you can cut about ten inches off your hammer handle. Might as well lighten the load if you ain't gonna use it.
Hey just joshing - your vids are great, keep 'em coming.
Beating on the engine shaft (or any bearing shaft) isn't a smart idea.
A gear puller works, too...
Jesus - put the blade back on and the two bolts and use it as its own puller! I would not want this guy whacking my mower like that!
dam that did not want to come off
Im in the dark
Do you have a video on a Honda HRR blade clutch replacement? Looks easy but your video's are great.