Shaper Origin Mortise & Tenon
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- This was a quick, easy and accurate way to cut twin (double) mortise & tenon joints using the Shaper Origin! Just another fun capability of this incredible machine! There are many ways to cut M &T’s…however, I was surprised to how well these fit right outa the gate! Thanks a ton for watching…Please remember to subscribe!
My iPhone set up for the Shaper Origin:
Kondor Blue Quick release plate: amzn.to/3LAo5dk
Davoice cell phone holer: amzn.to/3LuVs0W
Woniuke Articulating arm: amzn.to/3xDsXso
(I may earn commissions for purchases made from the Amazon links above)
You can get FREE files for the marquetry shown at the end of this video by clicking this link: hub.shapertool...
I also sell various veneer packs for this marquetry project...and you can find those here: ramonvaldezfin...
And this link takes you to a FREE tutorial on creating the marqetry shown at the end of this video: • Shaper Origin Inlay Tu...
Check out the Shaper Origin here: www.shapertools...
My Website: ramonvaldezfine...
My Instagram: / ramonartful
Tricks of the Trade eBooks...my eBooks containing woodworking tips/tricks about the table saw, router, planer, jointer, bandsaw, drill press, glue & gluing...tips about general woodworking and more! Each tip has a short paragraph explaining the trick/tip along with accompanying videos!
Help support my efforts here:
Volume I, Tricks of the Trade: ramonvaldezfin...
Volume II, Tricks of the Trade: ramonvaldezfin...
Watching this makes me want to invest in one of these units despite my partner having a giant industrial CNC router. Thanks for sharing!
It’s such a fun machine! I like the quick turnaround from idea to execution. Cheers
I just got one of these a few weeks ago. I got some great tips watching your video.
You’re gonna love it! And thanks for watching the vid
Stumbled upon your channel a month or so ago (thanks YT algorithm) and became an instant subscriber. Great work along with clean and simple video makes it a pleasure to watch your content. Thank you for sharing!
Thanks for the good words and feedback! I appreciate this 🙏🏼
Between glue, bondo-wood filler, epoxy and stains, I use a ton of chopsticks. I actually buy them in bulk online. That was great to see someone on your level doing the same 🤣. Thanks for sharing your knowledge.
Yep! I love em. Round works way better inside mortises as well as mixing! Thanks for watching and your feedback!
Thanks. I am digging my Shaper Origin and always looking for places to use it. It is such a handy tool. I recently wanted a large radius on the edges of a couple charcuterie boards. In the past I would of drawn them out and then cut on the band saw but that rarely comes out perfect. I used the Origin to cut a 96" radius on the long sides of the boards and bam, perfect! love it.
That’s awesome to hear! Yeah, so many uses for this incredible machine!
Thanks for sharing. Love the fresh approach to the frame. Beautiful results.
Thank you tons. I wanted the design of the frame to tie in or at least resemble slightly the New Mexico logo.
Always learn tons from you. Small details make it worth. Thanks.
Thank you…I love hearing this!
Thank you for the Shaper tips! You do beautiful work. I love your desert landscapes!
Thanks Jenn! Do you have a Shaper? The Shiprock scene is a fantastic intro to working with veneer!
Thank you for doing this content. I have been thinking about this tool. I have no Cnc experience or woodworking in general, getting older, and I wish to change that and do more craftsmanship.
That's a really cool machin, and in the right hands too! I love how you work Ramon.
A little tip incase you don't already know, if a picture won't hang plumb pop a little BlueTack on the bottom corners.
Best wishes from Scotland.
Thanks for a great Shaper Origin vid. Also stealing magnetic blocks for pipe clamps!
Cool! Glad to hear you liked. And yeah, the magnetic blocks I use all the time! Cheers
Nice job.
Thank you. Not the fastest way…but it was accurate! And fun 😬
🔥
🙏🏼👊🏼
Great video Ramon. I'd be interested to see you work this joint out on the Pantorouter.
Thanks a lot! This could be accomplished quite easily with the Pantorouter but it would require some spacers perhaps. I don’t think both mortises (or tenons) could be cut with one template. Anyway…thanks for the idea for another YT video!
@@ramonartful spacers I can manage. But if it were doable with a single template that would be great.
@@thwwoodcraft1449 Yeah...I don't really see how one could cut twin tenons this small with a single template at the Panorouter since it uses a 2:1 ratio. Let me think about this. Thanks
Another great video Ramon. Sooo if you could only have one is it:
Shaper Origin
Pantorouter
Domino
Yeah, I know Festool has 2 of the above and they are sponsors??...only one though
Thanks
Really good question. Everybody’s situation or needs would be different. Personally, I would probably have a Domino…especially since I sell hundreds of Docks! 😬
In fairness, they are completely different machines, each with their own capabilities and strongpoints. If one was building furniture where integral tenons were important, then Pantorouter all the way! Someone looking at building some furniture and small boxes, the Domino is a good fit. Another that may be interested in doing inlay, or cutting odd sized templates…maybe the Shaper Origin is a good choice. I am sponsored by two of the machines…so I do feel blessed for having all three. Thanks a ton.
Ramon that was great! Always learn a ton when watching your vids! Wondering if you have plans available to build that belt sander stand? Could definitely find a use for that jig. Thanks again!
That’s great to hear! And yep…here’s the link
ramonvaldezfinefurniture.com/product/belt-sander-dock-drawings-parts-list/
Another great Shaper Origin project, Ramon. It's an amazingly accurate machine and I love it every time I use it. I have a question about your grid layout when cutting the tenons. Is there a reason you didn't reference off the back portion of the vertical table of the Workstation rather than using the workpiece? Wouldn't that eliminate any slight error if the workpieces were not exactly the same thickness? Obviously, it worked just fine since your end result is perfect (puhfect 🙂)
Hey David…good catch! Yes, I should have referenced off the back of the work piece! By the time I thought of that, I had already started…and a couple thou diff in material probably didn’t make much difference here. I had marked my reference corner front/left…and since I’m so used to referencing off of that corner, I never thought about it until I was already cutting. Meh…it worked 😬. Thanks
@@ramonartful thanks for your response, Ramon. It's nice to have so many grid options.
I would have used loose tenons. That way you aren't depending on a router for the mating edges.
Yeah…that’s a good option. I just wanted to try the capability of this machine. It’s amazing for many things but not my first choose for mortise and tenon’s. Cheers
How do you like the Hammer A3?
I like it. Of course, if I had the space I would have stand alone machines. But this machine is solid and accurate both as a jointer and planer.
I could have been done with the cuts by the time you were halfway through with the long long task of setting up this thing. Take a ruler mark the wood take router with guide and zoom zoom done. Later on in the day you will still be inputting computer stuff into this little gadget. No thanks.
I get it. I cut mortise n tenons a lot of different ways. I just wanted to show yet another way.
Now, some people like technology and enjoy things like this. You’d be surprised as to the vast amount of things that this machine is actually capable of. I know for a fact that many of those tasks one could not do by conventional methods. At least not accurately.
Not trying to convince you…to each their own. Happy Holidays!
And I could have done it in a quarter of the time with my pet Beaver but the little guy was just back from the dentist.
I bet your customers paid for that! and you have cheap crap chisels?
Not sure what you mean? My customer paid for what? And are you talking about my Marples chisels? They’re decent. I also have expensive Japanese chisels! 😬💪🏼