F30 BMW 340i Downpipe Install DIY
ฝัง
- เผยแพร่เมื่อ 29 ต.ค. 2024
- I show you how to install or replace a downpipe on an F chassis BMW with the B58 engine.
1. remove the airbox
2. remove the O2 sensors
3. disconnect the V-band clamp
4. disconnect the downpipe braket
5. disconnect the mid pipe/downpipe clamp
6. disconnect the mid pipe support nut
7. drop the mid pipe
8. remove the downpipe
9. insert new gasket to new downpipe
10. reinstall everything
Downpipe Gasket - www.ecstuning....
Vband 2.5" - www.ecstuning....
Vband 3" - www.ecstuning....
Bimmerpost Article - f30.bimmerpost...
Instagram 📸 ~ @nw.auto
#F30 #340i #B58
Support the channel at no extra cost by purchasing products below. I earn a commission to create more content you enjoy.
ACCESSORIES:
BMW Travel Mug: geni.us/jRsb6ES
INTERIOR UPGRADES 🏎️:
Ambient Lighting - geni.us/En9tDW
Carbon Fiber Handbrake Cover - geni.us/C8Sr8n
Sport Pedal Covers - geni.us/RZrG
Sequential Turn Signals - geni.us/ei8lqId
ENET Cable - geni.us/JsU3w0
Trim Removal Tools - geni.us/bWv3
EXTERIOR UPGRADES 🏎️:
Black BMW Center Caps/Emblems - geni.us/BxYATl
Kidney Grill - geni.us/igNS
Carbon Fiber License Plate Frames - geni.us/BGKeciv
License Plate Screws - geni.us/v9TIAV
Plasti Dip - geni.us/hQgW59x
CLEANING SUPPLIES 🏎️:
Portable Vacuum - geni.us/IYLMUBk
Wheel Brush - geni.us/QmA5sB
Microfiber Towels - geni.us/NAfQC
Microfiber Brush/Mop - geni.us/dCRmt
Car Wash Bucket - geni.us/JYbv
Interior Air Vent Cleaner - geni.us/l5gc
CLEANING SOLUTIONS 🏎️:
Leather Cleaning + Conditioning Kit - geni.us/iykok
Wash & Wax - geni.us/B0OPxd
Tire Shine - geni.us/u38zMq
Wheel Cleaner - geni.us/VIgOV
Odor Eliminator - geni.us/9y0RsS
Ceramic Coating Spray - geni.us/xI5deHL
Water Spot Remover - geni.us/3BVOE
IronX Iron Deposit Remover - geni.us/qOgbLnX
Little Trees Car Scent - geni.us/Tvhg6g
MAINTENANCE 🛠️:
Air Filter Cleaning + Oiling - geni.us/ThWtF
Jack Stands - geni.us/3SVjYAW
Low Profile Jack - geni.us/FKQZH9m
Creeper - geni.us/NVLdK
ELECTRONICS:
Dragy Performance Meter - geni.us/EMtoww
Uniden R7 Radar Detector - geni.us/C09P
Uniden R3 Radar Detector - geni.us/1dHOO
Uniden R3 Mirror Mounting Kit - geni.us/mNqAi
Veepeak OBD Bluetooth Device - geni.us/03zVUdZ
CAMERA GEAR 📷:
GoPro Hero 8 Black - geni.us/ChJs
Smatree Tripod - geni.us/Ky0j
GoPro Charger - geni.us/BKmXPe
GoPro Batteries - geni.us/vUlXsy0
128gb MicroSD - geni.us/XBGncAV
POV GoPro Head Mount - geni.us/p9BM9Bj
Suction Cup Mount - geni.us/MQunb
You did good by removing the o2 sensors first. I really don't understand why other people leave them on while removing the oem. And they wonder why they're struggling.
It's because people don't spend money on the socket and need to go at it with a wrench. Of course I will argue if you've done it before and have the finesse to take it out with the O2 still attached, it's obviously easier to remove/install it off the car.
I would suggest leaving the v-band clamp on until you loosen the clamp connecting the down- and mid-pipe to make it easier to separate the mid-pipe from the down-pipe. If you disconnect the two nuts in the rear by the exhaust tips and the mid-pipe nut, you can pull the the exhaust tips back and twist a bit to pull the exhaust off the down-pipe. Then remove the v-band and two down-pipe nuts on the trans. It was really difficult to do this with the down-pipe loose from everything. Just did this yesterday on my F32.
Yeah definitely more than one way to do it. I see how that would make it easier
Wheels are looking crazy 🔥 🔥 🔥
Thanks. I'll be making a video on the wheel upgrade soon. Looks much better now
Awesome tutorial. Keep the uploads coming! #b58gang
I’ve been waiting for this😍
Good timing I guess. You doing this on your car?
@@NWAuto I’m planning on buying a 335 f30 this summer partly due to your videos haha, but I’ve been following your b58 build for a while and been wanting to hear exhaust setups
@@kennychavez4726 The 335 is fun and easy to modify. I wanna do a resonator delete before I do another exhaust video. The current setup is just way too quiet, so it would be a boring video
Hey did you hear about new BM3 maps? Version 2.2 for all b58 applications came out 12/14. You’re the man for the review on that one!
I haven't, but I'm definitely gonna look into the new changes and reflash
Have you flashed new OTS map yet?
Also weren’t you at one point running stage 1 WITH an aftermarket DP on? I’m asking because some people have been talking that the new maps lose a bit down low but gain mid range. And I like low end tbh.
So I was wondering if my current v 2.1 stage 1 93 would actually be enhanced with a high flow catted DP, but staying at stage 1?
@@scottjohnson8316 I ran stage 1 with aftermarket DP for only a few days before I flashed stage 2. I think the DP does enhance it. The car to me feels slightly more responsive with an aftermarket DP. And I haven't flashed the new map yet. Been snowing in my area so I'm not driving much
Ok so I admit after saying how I wanted to keep dp stock I gave in and got the evolution racewerks high flow catted DP. I got a great price on it and I’m figuring I may just keep my car at current stage 1 93 v 2.1 for a few reasons.....1. The new v 2.2 stage 2 93 map apparently has a lot of folks complaining about losing traction and going sideways...now I know it’s mostly in rwd cars ( I’m awd) but that doesn’t sound good and the tune may need some tweaks. 2. Also it seems that once PTF updates their OTS maps the previous versions are no longer available! I mean why not keep up the previous gen maps for at least a few months? I emailed them about it and they said I could find the previous map but I couldn’t....they are so vague in their answers.
My only concern is someone once spoke about throttle closure when running stage 1 with aftermarket DP? I guess when there is overboosting in real cold weather? But what difference would It make if I went stage 2 and it overboosted ? So I don’t get that....
@@scottjohnson8316 I think you should try out stage 2 and see if you like it. The jump from stage 1 to stage 2 will not be as big as the jump from stock to stage 1
Great vid bro. Looking to get mine done in the next few weeks.
Nice. Thanks for the feedback
Love the content keep it up
Just did mine yesterday 😁
Nice. Which downpipe did you go with?
What’s the lubricant for? Do I need it? And do I need a new gasket and v clamp or can can I reuse the oem?
Hey bro nice video. Mind if I ask if there's a difference between xdrive and rear wheel when ordering a downpipe as I can't find any solid answer ? I got a f30 335xi. Cheers !
I'm not sure that there is. But I would just put your exact car info in when ordering
Currently have a B46 and not tuned. If the car is not tuned, would you recommend getting a high flow catted downpipe (for the sake of deeper tone and increased hp) or would I not notice a difference without the tune? Basically, would I notice any sound difference without the tune and if it’s worth the money to get the downpipe without complementing with a tune? Also, when the catted downpipe is installed, would you recommend going from stock to stage 2 or stock to stage 1 (bootmod3)
Two of my friends are running downpipes with no tune. It just makes the car slightly louder, but also throws a check engine light until you tune it. And you can go straight to stage 2 after the downpipe
@@NWAuto which brand high flow catted downpipe do you recommend with and without a tune?
@@Likgoo VRSF is solid and cheap. But more expensive ones like Evolution Racewerks will give you a nicer tone
Catless is better for the flow and gives more power , the catted one is still restricted , for stage 2 it’s not very good, plus MHD is a better tune then BM3 , I had both and MHD feels more aggressive.
Yeah I went with catted mostly because I didn't wanna deal with the smell. It still drives pretty well on stage 2 with catted DP since it is much less restricted than the OEM. And I haven't tried MHD yet. But I'm gonna do the xhp flash and that should help it feel more aggressive
@@NWAuto you only get the smell idling with the windows down at a light or something but even then it isn’t a direct smell it’s only a hint of it it isn’t bad at all honestly much much less than what people were making it seem
Is this the mppsk exhaust? Or is this the m performance muffler (back box) with downpipe?
This was Valvetronic muffler
Will the gaskets and V bands work for any downpipe, or does it have to specifically be that brand? I ordered a 4.5 catless downpipe, and I just ordered the gasket and v bands to be safe
Should work for any. I think I got mine from ECS Tuning
When re installing catless downpipe, I couldn’t get the downpipe fully seated all around the turbo. It was seated almost perfectly. Will putting on the vband and tightening it completely fully seat the downpipe to the turbo?
I'd have to be there to see. But try making sure it is aligned properly. Tightening the vband could help seal it perfectly. But don't force it too much if it doesn't feel like its working
so along with the downpipe i should just get the downpipe to turbo gasket? i don't see a need to get both the vband clips
Yeah just get a new gasket
Great video. How much does the 200pp downpipe changes the sound of the exhaust?
Thanks. It makes the car slightly louder and less muffled sounding. Also a little bit more raspy and makes the burbles more aggressive
🎉🎉🎉gut Bmw340ix drive very gut ❤
I currently have a resonator delete and want my car louder. I could barely tell a difference outside of the louder pops. I have a video on my channel showing this. Did this downpipe make a noticeable difference in cabin?
The downpipe will make it louder and also change the tone. Its noticeable during cold starts and aggressive driving or revs. What muffler do you have?
@@NWAuto all I have at the moment is a double resonator delete. Stock everything else.
@@mevans313 downpipe will make it louder. Especially catless. And it will be required if you wanna tune past stage 1
@@NWAuto yeah I’d be fine with stage 1 just for reliability (it’s my daily I plan on keeping for the next 5-6 years) I only want a downpipe for sound. Considering even catted it’s the cheapest exhaust mod outside of what I’ve already done to it. Just wanted to figure out if it was even worth it or if it didn’t make a huge difference in sound. These cars tend to be pretty quiet inside even with full exhausts.
@@mevans313 stage 2 is still more than safe for this motor as long as you do your updated maintenance which is the same for stage 1 ie. more frequent oil changes more frequent colder spark plugs changes things like that
I installed the same downpipe on my 430i i have a muffler delete , no tune but i get a sputtering when I’m at low speeds or parked , do you think it’s cause it needs a tune
You can try tuning it and see if it helps. But I removed my tune a few times and I didn't have that issue
Now that you have this car paired with the valvetronic designs axleback, when you have the valve closed on the axleback, how loud would you say the car is, do you think it would get you in trouble?
It's not very loud. The cold start is the loudest part and even that isn't bad. I'm actually thinking of deleting one of the resonators to make it louder
@@NWAuto sounds good. I have an M240i and I have both resonators delete. I can't seem to find anyone who has an intake, catted downpipe, dual resonator delete, and valvetronic designs axleback. That's the exact setup i'm looking for.
I might have to make a video when I do that.
@@joshuamiller2089 Yeah I'd watch that. You can look at some of my videos when I still had a 335i. I ran AWE non resonated cat back exhaust with VRSF high flow DP. The cold starts were pretty loud. But it was perfect after it warmed up. I imagine the setup you're planning on doing will be about as loud as my old setup
I’m in the Portland area looking for a shop to do my Downpipe install? Do you have any recommendations
You can try Matrix Integrated. But they do high flow catted only. No catless
@@NWAuto have heard of them. I do have a high flow catted so that works 👍🏼
Is your exhaust stock except the downpipe obviously?
Valvetronic muffler and stock midpipe
how much clearance do I need to do this job? Can I do it on a ramp?
I did this job on my friends 340i using a ramp. It can be done
What are the benefits of this? Thanks
You have to get a downpipe upgrade if you want to go past a stage 1 tune. It improved exhaust flow by being less restrictive than the OEM
@@NWAuto thx
@@NWAuto how much power can be made from 340i with mppsk exhaust, catless downpipe and an upgraded fuel pump with custom tune? And what kind of times for 1/4 mile, 0-100-200? Thanks
Will this void warranty?
If something breaks and the dealer determines that it was caused by your mod then they will deny your warranty claim. But they will never just void your warranty. People who install a DP usually also tune it though
Whats your 0-60 and hm HP your making?
My 0-60 was 3.85 on stage 1 with VRSF DP. I haven't tested the 0-60 yet on stage 2, but I'd guess its just under 3.8. Current HP should be around 400 and torque around 440
Do you feel the difference from stage 1?
I do feel a slight difference. But it's nothing major
@@NWAuto but going from mppsk to stage 2 is huge that’s why i had just skipped stage 1 no reason to spend double the money on a map
Great video, i wonder if the vrsf downpipe benefit is just the 200 cell cat , it appears the oem and vrsf have the same dimensions. What do you think ?
Thanks. The VRSF downpipe is half as restrictive as the OEM one. I noticed the low end torque improved slightly after adding it
@@NWAuto that good !!! I suspected that it would still be an upgrade , any thoughts on the cts turbo catted pipe ? Has a different type of style.
@@johnnyjohnz1992 they are pretty similar just had mine installed
Yes! Now just delete those 2 pesky resonators for an amazing, loud, and drone free sound
I agree. Its still way too quiet
I must be honest. A gapped the M340i in my scat pack challenger
I have no clue about the last gen F30s. But I saw a current gen M340 XD edge out my friends charger scat pack charger W/Catback/intake & walk from a stock 5.0 mustang current gen this weekend. No idea if the BMW had any bolt ons or a tune, but I was actually pretty amazed, did not expect to see that. I'm not a BMW guy but for a 6Cylender that thing was FKING fast.
I'd like to line up against a scat pack
@@tv321123 Yeah theres so many factors that go into a race so unless u take it to the track its not that accurate and even then its still based on who launches better, weight, timing. But I did a 40 roll with a M340i the newer one he actually honked at me and rolled his window down, we went twice on his 3rd honk and he was in my blind spot for a bit then I was gone lol
@@julyfishy392 It was all impromptu highway rolls from about 60. Of all things my friend with the mustang bought the new M340 XD for his wife. He was going on about how she walks away from him in his mustang for the past few months. I did not believe it till I saw it, and that thing was FCKING moved for a 6.
Idk I’m glad I kept my DP stock ( I almost did the CTS high flow DP , but at last minute trashed it ) ...although I appreciate your mods I think if a stage 1 340 raced a stage 2 340 ( assuming stage 1 only had tune and stage 2 only had time and DP ) it seems there would be a few car length between the two. No one would be ordering gapplebees ! Also I think about whenever ( or IF I do ) sell my car I think a lot of potential buyers might appreciate a car with little done to it? But that’s certainly an IF.....either way your vids are top notch. When you gonna try those 0-60’s without LC? What do think ? LC gives you .3-.4 ?
I like the way the car drives with an aftermarket downpipe. It's less restrictive and you feel that. But I get what you mean about wanting to not modify too much. The value of my car is lower with the mods installed. And yeah I do those launches all the time, I just need to actually record them
Think you’ll ever dyno it?
Yeah I plan on it after I do my fuel pump upgrade
@@NWAuto I need to do mine as well. I'm making out my lpfp smh
@@cuttthroatperformance2752 I'm doing a high pressure fuel pump soon. Hows your build looking so far?
Damn that thing hauls ass
Yeah the B58 is no joke. That was stage 1 in the video. I'm running stage 2 and it pulls even harder now
@@NWAuto damn cant believe that’s without any crazy crazy mods it pulls that good. Stage 2 must be incredible. Nice upload car sounds beautiful !
@@AndroctonusHector Thanks! It has been a lot of fun