Esco, great tutorial. I am a new mac user and have followed your guide step by step. My mapping is fine but I'm unable to get proper audio. I get audio but just through master and a fixed level, the sliders show reaction in the software but make no difference to the audi level at all.. any suggestions?
Esco, thanks for doing this video. For some odd reason, my jog dials are very wobbly. Even though I run a MacBook like yours, the response is not accurate. Example, I move the record back and forth and the waveforms and sound does not reflect the movements. Latency? Registry? What are your performance settings? I've never had this issue with my NS6 or 7.
@maurice richardson in all Pro versions of Virtual DJ You are able to download from VDJ different skins to customize to your personal liking additionally you can create your own custom skin. :)
I followed your set up until I download the plug in and click "open" At this point is says "Virtual DJ not found". Any assistance would be greatly appreicated.
@fastwrx415 Check the hardware connections (USB/drive power etc) Then Check the software (Serato DJ or other). As the DDJ-SX does not read or access your drive. The drive is accessed through your Operating system, then translated by the Software GUI for use in this case Serato DJ, Virtual DJ, Traktor or other. the unit then interfaces with what information is provided by the GUI.
Que onda amigo Mira compre el ddj sx pero mi computadora cuenta con intel bueno ya hice todo lo que explicas auctualise el controlador y descarge el map pero algunas cosas no estan funcionando como los audifonos no puedo escuhar el deck B solo puedo pre escuhar el deck A algun consejo que me puedas dar te lo agradeseria bye
Hi. I just purchased a DDJSX and I own VDJ7 and VDJ8. I love VDJ7 more and trying to install both on mac and pc. you mention in this video about updating firmware. I don't understand this. also do you have a video on how to install on pc?
Good video, after having some issues with serato, and read about dozens more I would be looking to go down this route, so my question is, does everything work as it does with serato, like slip mode, and pitch while in sync etc?? Thanks in advance.
@Dylan Tennant As @Georgeal40 stated it could be due to your existing hardware config. Some like Lamborghini some like Nissan Skyline GTRs and some like to build their own custom setups. VDJ can be custom configured or tailored to your own liking. Note my goal in all of my videos is to help all people.
Saludos Bro, gracias por el video, oye cuando estoy en la página de VDJ para descargar el controlador, no me aparece el controlador… solo aparecen dos iconos de diskets pero ninguno dice MAC ni Windows… sabes que puedo hacer ahí… tengo el VDJ original, lo compré y todo bien
virtual dj 7.3, macbook and ddj sx can you please send me that file you installed am not registered on vdj site. And what is this thing of putting ddj sx into a mode other than serato? holding play shift and switch on. Only left side of deck lights up..at start of this vid u mentioned u will cover this.
Heynow, can you post the how to's for the mapping for windows 7 off the virtual dj website? I see the mapping for Phantom but I think it's for a Mac because when I clicked the floppy, nothing opened. Thanks in advance...
What you need to do is get a blunt object, anything will do, and smash the living hell out of your Windows computer. Then grab a fuck load of money and go buy a mac. Hope this helps.
Certainly, You have to be a registered Virtual DJ Pro User. Once you have registered your product on their website you can download the latest version which natively supports the DDJ-SX or download the Midi Map files from the Virtual DJ Page once you are logged in. Hope this helps.
quick question when you setup the sx to use with other midi softwear do you have to do it each time . and with vdj 7.4.1 do you still need to do that ? thx for the help
No just save you setting in config. If you change your set up then go back: pick you saved setting. If no changes are made it will go with your last setup
Thank you for the reply i had done some more research back then and found that out by playing around with it but thanks for getting back to m,e on this question
My Trim controls don't go all the way round they stop at 3/4 but the controller is all the way round. . How do I adjust them. . Im using my sx2 with vdj 8
Whats going on bro...? Now i purchased VDJ Broadcaster and i have the hacked version of VDJ Pro haha lol ( Hack Different ) but yea i cant get it to work on my Pro version, because of licensing issues with VDJ, but i can get my Mixtrack Pro 2 Controller to work on my pro version idk if you know anything about getting the DDJ-SX to work on a hacked version of VDJ Pro but i need your help...lol
Rudy My wall paper says "Hack Different" because I actually live by that. I am a programmer therefore, I hack. However, the kind of hacking is referred to as compiling, programming and writing code. Not taking advantage of companies and vulnerabilities. Use things in a positive way and positive things will come as a result. Use things in a negative manner and things will not work for you in the end. In short what you do is your business but I simply cannot support you in your request nor can I get involved in anything illegal.
The professional thing to do is acquire the licence from VDJ so you can expand and unlock the doors to a unlimited feature set and full ability to customize within the software.
ok soo my current licenses is not allowed to download Controllers can someone send me a controller plugin for the Denon MC3000? :/ i have Virtual Dj Pro 7 0.0
Thanks DJ Esco - Currently working with an Ergo/VDJ7, but this machine looks awesome. Thanks for showing us how to set it up.
My pleasure. Glad it helped. I plan to release another tutorial when VDJ 8 Pro is released.
Thank you for that helpful vid. Much appreciated. I updated to VDJ 7.4. Now both platters lights up. Thanks again DJ Esco
Got mine working with Virtual DJ Thank you for the Video , I noticed that the platters are not lighting up ?
Good question.
You can adjust your latency within VDJ to your specific needs.
I have mine set to equal out to Serato DJ
Great Video, Thank you!
Very useful video. Thanks for posting!
Thank you
Well at least the mini doesn't crash the database ever so often. :D Also, VDJ 7 is pretty good, and extremely customization-friendly software
Is it possible to have the center platter circle lights working? I see that they are not. thanks.
Esco, great tutorial. I am a new mac user and have followed your guide step by step. My mapping is fine but I'm unable to get proper audio. I get audio but just through master and a fixed level, the sliders show reaction in the software but make no difference to the audi level at all.. any suggestions?
Esco, thanks for doing this video. For some odd reason, my jog dials are very wobbly. Even though I run a MacBook like yours, the response is not accurate. Example, I move the record back and forth and the waveforms and sound does not reflect the movements. Latency? Registry? What are your performance settings? I've never had this issue with my NS6 or 7.
Hi so much for video it was helping just wondering how do you program your sampler trigger and volume
@maurice richardson in all Pro versions of Virtual DJ You are able to download from VDJ different skins to customize to your personal liking additionally you can create your own custom skin. :)
for Traktor djtechtools you find it under mappings
I followed your set up until I download the plug in and click "open" At this point is says "Virtual DJ not found". Any assistance would be greatly appreicated.
@fastwrx415 Check the hardware connections (USB/drive power etc) Then Check the software (Serato DJ or other). As the DDJ-SX does not read or access your drive. The drive is accessed through your Operating system, then translated by the Software GUI for use in this case Serato DJ, Virtual DJ, Traktor or other. the unit then interfaces with what information is provided by the GUI.
Help!! My DDJSX is not reading my external hard drive. Any help would be great. thanks
Hi good video i did notice the lights on the scratch plates wasn't actually running was that just me or have you had a problem with this?
Que onda amigo Mira compre el ddj sx pero mi computadora cuenta con intel bueno ya hice todo lo que explicas auctualise el controlador y descarge el map pero algunas cosas no estan funcionando como los audifonos no puedo escuhar el deck B solo puedo pre escuhar el deck A algun consejo que me puedas dar te lo agradeseria bye
Yes, I hope It will be fixed in the future 2, because these are typical necessary pioneer desings :)
The mapper is the same for Mac and PC
did VDJ remove the upgrade for MAC on the DDJ SX?
hey ya! can you give the text mapping of the slicer? im using a diff console but i really want that control of slicer? thanks
If you use v dj for the sx the platters don't light up ???
Do you have one for PC?
hows ur latency with this setup? especially with scratching?
where did you get the dj equepment in the first place,thats what i need to know.seems pretty neat
Most of what I use or have you can purchase from any musician retail stores such as Guitar Center.
I think this has to do with the mapping. Much like the spinning Jog wheels on the Numark NS7.
Will this still work?
Hi. I just purchased a DDJSX and I own VDJ7 and VDJ8. I love VDJ7 more and trying to install both on mac and pc. you mention in this video about updating firmware. I don't understand this. also do you have a video on how to install on pc?
I am not certain if needed to be performed on latest builds of the DDJSX . however you can download the latest firmware from the pioneer DJ web site.
where can i download the mappers ?
can u go around that?
Good video, after having some issues with serato, and read about dozens more I would be looking to go down this route, so my question is, does everything work as it does with serato, like slip mode, and pitch while in sync etc?? Thanks in advance.
It's very reconfigurable or customizable, but by default the majority has been mapped to be the same with some enhancement.
bro. how can i get that skin for virtual dj? please let me know
ayudame con el mapper para window please gracias
Uso Serato, Traktor, Virtual DJ, One y Resolume con ello.
qual virtual dj voce usa?
@Dylan Tennant
As @Georgeal40 stated it could be due to your existing hardware config.
Some like Lamborghini some like Nissan Skyline GTRs and some like to build their own custom setups. VDJ can be custom configured or tailored to your own liking.
Note my goal in all of my videos is to help all people.
Saludos Bro, gracias por el video, oye cuando estoy en la página de VDJ para descargar el controlador, no me aparece el controlador… solo aparecen dos iconos de diskets pero ninguno dice MAC ni Windows… sabes que puedo hacer ahí… tengo el VDJ original, lo compré y todo bien
virtual dj 7.3, macbook and ddj sx can you please send me that file you installed am not registered on vdj site. And what is this thing of putting ddj sx into a mode other than serato? holding play shift and switch on. Only left side of deck lights up..at start of this vid u mentioned u will cover this.
Hi Esco, the file is downloaded as an xml, what should I do?
Thaankkkkkks
what does the skin look like?
hola dj esco, yo compre el ddj sx pero quiero empezar a hacer video mix.
tengo que comprar video sofware para hacer mis video mixes?
cheers mate !!
why jock wheels are not working
Sam problem only one of my sides are working
Heynow, can you post the how to's for the mapping for windows 7 off the virtual dj website? I see the mapping for Phantom but I think it's for a Mac because when I clicked the floppy, nothing opened.
Thanks in advance...
What you need to do is get a blunt object, anything will do, and smash the living hell out of your Windows computer. Then grab a fuck load of money and go buy a mac.
Hope this helps.
***** LOL let's be nice.
pleas for traktor ?
Is it the same for the ddj sx 2 bro ?
Yes
which mac are you using?
I have 3 2013 Late Retina, 2012 Mid, and 2011 Late all are MacBook Pro 15 models I think I used a 2011 model in this video
Hello sir can you send me DDJ T1 mapping on virtual dj 7 please help me sir ...
y ur jog wheel lights out?
sup esco i have a mac...but the vdm website is telling me my current license doesn't allow me to download controllers
what should i do..
You need to purchase vdj8 or VDJ 7pro
+DJ Esco hola Dj Eco. por favor puedieras compartir ese plugin es q no tengo la licensia para descargarlo. wilson.ciprian@gmail.com
Hey man can you help me how to make work virtualdj with ddj sz pionner? Using a Mac Pro Thank you
for you Time
Certainly, You have to be a registered Virtual DJ Pro User. Once you have registered your product on their website you can download the latest version which natively supports the DDJ-SX or download the Midi Map files from the Virtual DJ Page once you are logged in. Hope this helps.
quick question when you setup the sx to use with other midi softwear do you have to do it each time . and with vdj 7.4.1 do you still need to do that ? thx for the help
No just save you setting in config. If you change your set up then go back: pick you saved setting. If no changes are made it will go with your last setup
Thank you for the reply i had done some more research back then and found that out by playing around with it but thanks for getting back to m,e on this question
My Trim controls don't go all the way round they stop at 3/4 but the controller is all the way round. . How do I adjust them. . Im using my sx2 with vdj 8
It under behavior on VDJ s menu
"Rotary"
Thx for that :)
No prob.
no me muestra forma como descargarlo y en esta epoca
yo would it be possible if u could download the mac one and send me a link for me "Hercules Dj Control MP3 E2" I lost my code.
how do you download mac vutral dj pro
go to www.virtualdj.com
Yes you will not loose the ability to use Serato
Whats going on bro...? Now i purchased VDJ Broadcaster and i have the hacked version of VDJ Pro haha lol ( Hack Different ) but yea i cant get it to work on my Pro version, because of licensing issues with VDJ, but i can get my Mixtrack Pro 2 Controller to work on my pro version idk if you know anything about getting the DDJ-SX to work on a hacked version of VDJ Pro but i need your help...lol
Rudy
My wall paper says "Hack Different" because I actually live by that. I am a programmer therefore, I hack. However, the kind of hacking is referred to as compiling, programming and writing code. Not taking advantage of companies and vulnerabilities.
Use things in a positive way and positive things will come as a result. Use things in a negative manner and things will not work for you in the end.
In short what you do is your business but I simply cannot support you in your request nor can I get involved in anything illegal.
comparte el map
Vene incluido
I do not get it How are you?
Doing great! What do you not get?
puedes explicarlo en esta version 2017?
hello mate can u do me a favour to give me that download file please? because I cant download it
The professional thing to do is acquire the licence from VDJ so you can expand and unlock the doors to a unlimited feature set and full ability to customize within the software.
I get this: Your current licenses do not let you download drivers
You must be a VDJ Pro Registered user.
ok soo my current licenses is not allowed to download Controllers can someone send me a controller plugin for the Denon MC3000? :/ i have Virtual Dj Pro 7 0.0
its a windows PC
DJTonioRoffo Took care of that ---->(Unlicensed user asking for mapper making a request here)
Why would you want to use virtual dj with this amazing peice of equipment ????? its like putting a lambo engine in a mini!!!!
aha....!!!!
heii
really? ....
Can you please respond to my inboxed message I sent you
Hi so much for video it was helping just wondering how do you program your sampler trigger and volume