Fitting Up a Piping Spool | PIPEFITTER SERIES
ฝัง
- เผยแพร่เมื่อ 18 มิ.ย. 2024
- Today we got another video for our pipefitter series. Ciriza Welding fits a piping spool from start to finish. On the next video we will show you how to draw the ISO he used for this piping spool. If you want to learn how to fit pipe look no further.
#WeldTube #southcoastweldingacademy #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 3](http://i.ytimg.com/vi/A1XXYbV048k/mqdefault.jpg)
👇WeldTube Store👇
www.weldlife.com
if you burn 9" from a 90.. what do you burn from a 45?
As someone who is old enough to remember not having TH-cam as a resource... This content is completely phenomenal. I spent $15,000 and 7 months at a tech school to learn how to do this. You guys always put out the best content!
th-cam.com/video/43G2N4CXbTo/w-d-xo.html
Wow,that’s a lot of money.I joined pipefitter/welder union 5 year apprenticeship and learned it free.Been in the trade now for 26 years.Great video!
That's too much money
Now I feel crazy being a student paying 13,000 for 7 months and I’m 32…. I could of just learned hands on?! And paid for the tests/certificates and studied myself?!
@@MO-ml1qg you're paying still lol
Im a Construction Manager and came up through the trade as a Pipe Fitter. I hold NCCER 1,2,3 & 4 in pipe and have my plus. This is the first good pipe related TH-cam video I have seen related to our trade. I will make sure to share it with the new guys coming up I think your videos will benefit them. Keep up the good work.
Hi you guys are the bees knees i worked in the nuclear, offshore industry for 30 years this is the best video iv'e seen of how it is is done, btw we used to call wedges foxes,& we tacked bullets in the bevel instead ( the welders preferd it) of tacking in the butt, takes me back to wonderfull times.
Every new pipefitter needs to watch this video... you showed an explained everything perfectly
Great video! Showed the importance of technique, being methodical, and the right tools.
Just learning welding. I have been a carpenter for close to 40 years, and I have always tried to work precisely. But you take it to a new level. Kudos 👏
Great work. One thing ive learned about when youre tacking on the single 45.. its a lot easier to tack the 45 onto the next piece of pipe, you can just stand up the pipe and set the 45 on it and tack it.. then tack that onto what you already have together..
As a Pipefitter with 8 years Journeyman and 1 year PF helper, we weren't as lucky to have these videos back then. We had to learn on the field as a PF helper. I just hope Fitter helpers really learn from this and actually practice this as a helper until they have it down right because I see alot of fake it till you make it wanna be Pipefitters out in the field that lie about how much they really know and put us real Pipefitters in a bind. Good luck green hands and pay close attention to this guy.
I really hope i have a teacher as calm and informative as this dude when I start fitting this fall
I’ll be attending SOUTH COAST WELDING ACADEMY beginning of the year can’t wait !
I’m gonna sign up as well
Man I wish I had this guy as my fitter when I was coming up... great instructor
Thank you 👍
Me too 10 years ago
Thank you for sharing that great learning show. Loved it
Keep these series coming. Fit up some laterals and Y connections next. Great work!
Thank you very much, you are surely professionnal pipefitter
Great video. Thank you for your content. Much appreciated.
I'm a B book HVAC technician out of steamfitters local 475 Newark NJ I worked for a big mechanical contractor for 20 years and never got into welding until now
Watching these videos as a non-welder, I'm always impressed by how strong tack welds are. Those pipes look heavy and only 2 tacks holds it up. Anyways, thanks for the content!
Very nice 👌👌👌 I'm see from Bangladesh 🇧🇩🇧🇩
I saw that cool elbow level. What a great idea! Wow
If I could afford the school I sure would want you to be the instructor you make a great teacher
Thanks for this material, Is awesome !
Thanks for the video, I came here to learn how to use the squares to square the 45 fittings!
I
Thank you guys i learn it in this content keep it up
Bravo, this was really understanding
Man, we need more or fitters in NC for some clients. We keep getting "master" welders that can't weld for shit. Keep up the good vids man
Great job !! Thanks
You're a good journeyman congratulations good luck
You are VERY GOOD.! Your career level is VERY LEVEL + VERY HIGH accuracy. However: You just do. No need to say much. I see I still understand. Because I'm Vietnamese... don't understand What are you saying???? I have subscribed to the channel and support you 01 line. Thank you very much. Wish you good health....
Gracias 🫂 saludos desde ARGENTINA 🇦🇷 // MAESTRO.!!
beautiful job and wonderful work
Good work guys thanks 🤜🤛
Awesome video for training🤘🤘🤘
Those edits are dope!
Great job
Very good pipe fitting class.you are a good teacher also 👍.
I was a offshore construction superintendent youse to take a helicopter by myself fly to a production platform and the pilot would wait for me and I'd go take all the measurements on a bunch of piping go home draw up every thing let the shop fab it up and then bring a crew out and install everything that's all old school paper and pencil that was a long time ago but I enjoy watching
Great 👍
very helpful tips
good vid as always!
Thank you for this video
Great video. really appreciate the knowledge you're passing down to us. I'm still school and this types of video helps give me an idea of what to do in the field.
Glad it helped you out 👍
th-cam.com/video/43G2N4CXbTo/w-d-xo.html
I'd like to ask if you can show the up and coming welders about rolling offsets in a video such as this one, to help further educate and show them how to apply the rolling method math wise and layout no one has this video yet!! help them please
nice videos😊
ありがとうございます♪
Nice video thanks for knowladge....
Terimakasi paman atas ilmu dan pelajaran yang kamu beri 👍👍👍👍👍
This Guy Is Bad Ass Nice Work Brother 👊🏻
Pretty much had to learn all this shit on the spot, hope future hands can use this as a reference.
Was it hard taking it in all so quick ? I’m in the same position
You may have to two hole on a straight run of pipe if there is a seam. Awesome video. 💪💯
Good process 🔥❤️🇮🇩
You can use the internal fit-up clamp tool from sumner for flange to pipe installation and they have the ultra qwik clamp for pipe to pipe ether
Thank´s for sharing.
The 90 square is really cool, I usually just a 2' level and a carpenters square to square my 90s
Awesome video! That’s a lot of work for one video too! 👏🏻 💪🏻 🔥
🤙🤙
Awesome video!.I like it most.
Hola muy bueno tu vídeo saludos desde Guayaquil Ecuador yo también fabricó linias de tubería
Muito bom mesmo! Márcio Almeida do Paraná Brasil.🇧🇷👍
Good job.. Thanks
Please more intro pipefitting with using levels and some advanced thank u very helpful.
Suggestion: You don’t need to 2 hole that until your ready to put fittings on…it’ll save you time. Once you have it tacked then 2 hole it for your fitting. Just a thought.
Regardless of when you do it, you're still going to have to 2 hole it eventually. Just a matter of doing it at the start or later for the fitting. It's the same
Gracias genios!
Fitter Power!!
awesome video
I took a drink every time he said actually. I'm higher than giraffe genitals
Excelente el proceso constructivo. Pero me impresionaria muchísimo más si calcularán geometricamente la diagonal que va desde el inicio hasta el final y que además coincidiera con la pieza. Eso sí sería de alto nivel...!!
Thanks 😊
Yall have some fancy tools
Good job
the land on the 90.. lol. and the look he gave you lol
FYI " level " is horizontal " plumb " is vertical. Straight up and down. Nice work .....very informitive.
Demen trabajo soy de Colombia
They are good welders and pipes, the advantages of today is that there are already couplets already manufactured of different grades and nothing else you have to put them and level, before the good pipes had to manufacture all the tubes with their respective degrees and reductions from higher to lower, they made the strokes, and templates, do not say the flanges, also I had to manufacture for hundreds of flanges I was welder and structurist cordial greetings atte Jesus
The flange+straight pipe fitting is easier vertical. But hey, what works works. Also it is way better to weld connections right away if you need the fit to be 100% level, since it ALWAYS pulls a little bit. But that is up to the client.
Definitely missing a few tricks of the trade but he is great on the basics. Any welder worth his salt has made a tool or two to make fit up much easier and faster.
Double money 💰..fitter/welder..to much work
I feel like this is a dummy proof process of being able to get that perfect and square. I love it cuz I'm a dumby.
Buenos días, saludos desde México, los felicito por su excelente profesionalismo y el gran contenido técnico que tienen sus vídeos, son muy buenos. Sólo tengo una duda, la abertura de raíz que dan de 5/32" en qué código de ASME se ampara, por su respuesta muchas gracias amigos.
th-cam.com/video/43G2N4CXbTo/w-d-xo.html
Awesome vid. Love the content. Where can i get a Pipe Elbow Square tool like that to purchase?
Good job
I do this
Y’all should show the prints and how y’all go on about find the rolls,Take-offs, and final measurements.
Good 😊
You need to get stabila levels for the future, stabila torpedo…been fitting pipe and vessels for years
so long as level shows level it really doesnt matter what you use
where do I buy a positioner like you have there… or how would I go about building one?
I'm happy that there's someone that wipes levels off as much as me, drives me nuts when people put them on things with a glob of metal on the bottom. 🙈
Did you check inside diameter of flange and pipe if it's ok
Fit up it's cool if the pilipino pipe fitter they not fit up like that get table lay down the flange and put the pipe standing for flange so u can easily fit up for nice position
Will there be a video where you demonstrate how you get your measurements using a laser, thanks !
Jennifer are you taking about using a laser level to find elevations?
@@cirizawelding5076 using a laser to run piping
Like laying out on the ground?
@@taylorsantos1011 using a laser to pull from each end, get elevation, offsets etc around existing pipe.
You would never want to tack that up like that!! You could roll most of it out if you didn’t
True, but some companies want the complete spool fitted up. Also, I'm not sure if the measurements he checked included shrinkage while welding
Pro👍
Wow
Thanks
Great video, full of info. Is that lift TIG?
Yes sir lift start
When you checking the level on the side of the flange, I noticed you said it’s almost level, does it matter if it’s almost level ? Or do you need to have it perfect level ?
Did you make the table jig to hold the flange? Where can I find one?
Is flickering, when the auto darkener stops for a moment when tig welding?
Good video congratulations im from México im a Pipe fitter,i has worked in sonda de Campeche oil field,AND i would like to work with you ando excuse me my english Is not good
Is the 5/32" spacer a bent welding rod or what is that? Makes the gap process alot faster
Yes just bend a rod in half
Thanks!
Please don't stop what you guys do because you are very helpful could not thank you enough.
That's some real world pipe fitting lol. My only problem is y'all didn't use a tri-square OR a framing square. Not everyone has a roll out wheel or a positioner.
Can you do more iso, 45 degree offset and rolling off set from drawings
Pls. Kindly show us the actual fit- up of two consecutive 45 degree elbow into pipe spool. Thanks a lot
He said bird beak and the bird in the background got offended lol
Por Favor Podrían Subir Un Mismo Video Pero En Español, Muchas Gracias 👌🏻💪🏼
Where did you find that 11×17 inch clipboard
Hay quá 😄💗👍💖
Standard take off.90 Long rad. Dia of pipe×1.5=take off of 90 degree./45degree dia of pipe×.625=take off of 45 degree.