Looks amazing! One question, did you replace the amber turn signal lens with a clear one or just remove the amber lens and put nothing back in place of it?
He didn’t replace it with a clear piece he just took it out. I’m sure you can get clear replacements for the Orange which would make the signal brighter
I completely removed the old orange amber plastic piece in the headlight. I didn’t replace it with a clear one, just simply removed it & put in a new orange bulb because the factory one is “yellowish”
once you removed that orange amber and replaced it with a clear one .. what amber lights do you use now? cause im wondering if you use the same stock lights or get white LED amber
You must have a lot of patience for all those little fine details.I give you a lot of credit. looks good
3 years later and this was super helpful. 🙏🏻 So tired of my amber headlights.
Great video sir, loved your attention to detail and accurate information, and your stories were great too! Thanks!!!!
Literally best vid on TH-cam for this job. Thanks for the help will be doing this later
Early asf in the morning and me and Levi chilling watching and supporting
Beautiful color cuz. I have a 2015 Ocean Blue double cab. Electric steps, and murdered out tint is all I did. My other 2000 Silverado is clean.
You able to post the link you got the glue from and the double side tape
What do the blinkers look like with out the lense cover
Looks sharp,Nicely done. ♠️
All that work to take out a freaking headlight freaking Engineers what the hell
I don’t even own that year truck. The picture was a damn “thumb nail” to me. Nice truck my guy👍🏼
Did you just take off the bottom section & left it without or did you buy a whole new clear one ? Sorry it’s hard to tell
Sick bro I want to do this to mine as well same truck just all white 🔥
Gracias Hermano
Looks time consuming but the end result is sick . Good job
Video on point bro ‘ Just did mine burglary 🔥
its Unique...beautiful truck 😮
Beautiful truck bud, I love it.
Love the truck bro
Keep up the good work 👌👍
Aye bro where did you get the clean lens?
has it leaked?
Holy inspection failures Batman !
Slick truck bro
Good stuff cuñado✊🏼
Nice truck
Where did you get the clear replacement for replacing the Amber bottom one?
Is it maybe clear underneath & amber is in front?
I thought the same as you.
@@JohnCarter-ip4fm he just took off the amber piece after 2 years i have figured it out lol
Aye bro what type of glue did you use for the reglue??
Looks amazing! One question, did you replace the amber turn signal lens with a clear one or just remove the amber lens and put nothing back in place of it?
He didn’t replace it with a clear piece he just took it out. I’m sure you can get clear replacements for the Orange which would make the signal brighter
They sale both but you can just do that
After removing the amber lens, could you swap over to amber leds to keep the correct color for the signals
Brotha man! Love the video, quick question, where’d you find the clear pieces for the turn signals?
I completely removed the old orange amber plastic piece in the headlight. I didn’t replace it with a clear one, just simply removed it & put in a new orange bulb because the factory one is “yellowish”
My 2016 high country doesn’t have the ambers it’s led changes color is that stock or aftermarket I bought the truck used?
The ltz and high country came with fancier headlights and tail lights than the lt as shown
I know this is an old video but how do you get them one lights to flicker like that
🔥
Thanx brother
Good shit baby, keep it up 😘🔥🔥
Keep it up G👊🏻💯
Lol "The right one might get done quicker than the left one, if you know what I mean"
Nice work ! Where did you get that hood? Would look great on my 2018
Do You know if you can add a DRL to the bottom like on the 2018?
🔥🔥🔥
so if u tint the orange, will it still light up orange? Cause i heard in the US u got to have orange or yellow lights
How do the turn signals look now without a reflector?
So on the bottom amber piece, you only ended up removing it?
Or did you get a clear lens?
Correct
@@x503Garage hows it holding up
Nice man what drop do you have on it?
Did you color the bottom Ambert
What hood is that ?
We never did see him on the next one 😕
What sealant did you use to put it back together?? Looks great!
Logan Loertscher I ordered headlight sealant on amazon, then I used silicon after I put the headlights together just for extra measure
Nice
once you removed that orange amber and replaced it with a clear one .. what amber lights do you use now? cause im wondering if you use the same stock lights or get white LED amber
You can get a ALLA Lighting brand bulb that is yellow.
good shi bro
❤️🔥❤️🔥❤️🔥
how long was the procces?
What size tire you running on them 20s
How long did it take bro?
Where did you get the clear lens that replaced the amber?
Doesn’t look like he replaced it. There is a company called “klearz” you can get them from
Say bro where can I find the clear turn signal so I can take the stock one let me know
Klearz manufacturing, look them up on ig
Bro only got one video ☹️
Alright cuh
Chingon.
Any one know if there's a switch back for that small corner marker
There is I just got it from diode dynamics. Getting them installed this month with not clear but smoked lenses. And the switchbacks.
@@camarillo861 hey man, how did your smoked lens turn out? I’m looking at doing mine smoked instead of clear too
@T Bird they turned out really good.
No quema cuh
Do you have insta I have a question on taking off the lens
What’s your new ig
Mustang gt hood??? Wtf...2002
🔥🔥🔥
What hood is that ?