550 isnt cheap to me lmao. I put 200 dollar ebay headers on my camaro and they sounded really good. best mod ive ever done. Glad you enjoy them and great video.
@@KDlGGso true but if people gonna buy cheap headers i recommend on using oem gaskets if they fit because those headers come with the worst exhaust leaks
You will need a tune you will have a check engine light for your o2 sensor and the whole point in putting long tubes on is to get max power out of em so I say you need a tune
30 hp is a lot and worth it also do the lt2 or lt1 6.2 intake manifolds with l86 6.2 throttle body or lt5 zr1 throttle body all parts dirt cheap on rock auto
I’ve installed a decent bit of aftermarket parts on cars headers included yes most the time they require modifications but the headers you have were really just designed bad you shouldn’t have to do that to make a part fit even with the wrong headers I bought for a different variant for my Silverado they mostly fit it was engine off set that caused them to not fit properly both of the headers cost $100 the headers you got are possibly defective
Did you connect those to the stock exhaust past the y pipe? Or did it have an aftermarket exhaust already before you installed these? Looks like it was a badass mod well worth it.
@@rosstrittlerif I may ask for your advice, 20x14 13.50/55/20 35” tire I am not a tall guy at all 5’6 should I go level kit . & yes I’m so down to cut my truck up.. im having a hard time finding videos even photos with the set it considering. Any advice will help me understand what I should do.. yes I do plan on slapping a turbo in a making it street truck
I just installed the same headers on my 14 and for some reason it barely touches my steering shaft i have a little resistance when turning now did you have that problem? Imma have to clearance them tmr
550 isnt cheap to me lmao. I put 200 dollar ebay headers on my camaro and they sounded really good. best mod ive ever done. Glad you enjoy them and great video.
Thank you!
50k isn’t cheap either, but if a lambo is being sold for 50k you wouldn’t say it’s not cheap. 550 is cheap for good headers
@@KDlGGfuckkk noo it aint 300$ max
@@KDlGGso true but if people gonna buy cheap headers i recommend on using oem gaskets if they fit because those headers come with the worst exhaust leaks
@@Elpena830 I’ve seen even oem gaskets not seal on those, sometimes you gotta get them machined but then you may have other issues
You guys make me wanna install the long tubes I ordered for my ram a month ago😭
Do it! Made a hell of a difference.
@ finally did it and my truck sounds amazing 🤘🏽
Speed engineering headers fit amazing on my gmc 17 model
I'm jealous
Did you have to get any tuning
@@randydenney3402 yeah you will
@randydenney3402 nah bro you definitely don't, but it's a good idea for max power
You will need a tune you will have a check engine light for your o2 sensor and the whole point in putting long tubes on is to get max power out of em so I say you need a tune
luckily denting your header tubes for fitment somehow doesn't hurt the flow
my speed engineering headers fit my 08 4x4 silverado perfectly
Jealous
30 hp is a lot and worth it also do the lt2 or lt1 6.2 intake manifolds with l86 6.2 throttle body or lt5 zr1 throttle body all parts dirt cheap on rock auto
Wow! I'll definitely look into that.
Your videos are to damn good you should have way more subscribers bro 1000%
Appreciate it man 🙏
Nice I put some long tubes on my 14 back in July. Definitely a fun job only managed to break one manifold bolt.
Nice!
where did you buy your headers from? i have 14 and want to do the same thing
@@martinguzman6551 speed engineering website
I’ve installed a decent bit of aftermarket parts on cars headers included yes most the time they require modifications but the headers you have were really just designed bad you shouldn’t have to do that to make a part fit even with the wrong headers I bought for a different variant for my Silverado they mostly fit it was engine off set that caused them to not fit properly both of the headers cost $100 the headers you got are possibly defective
I'm not really sure, they could have been a bad set, but we got them to work.
What tail lights are those? I like em.
He got them off eBay. They were super cheap and came with a matching 3rd brake light.
I put jba headers $1700 new on my 2016 gmc and they fit perfect with no modification at all
If I was you I'd be extremely disappointed if they didn't.
I just cut the y pipe into 3 pieces with a reciprocating saw, didn’t drop the cross member
That's one way to do it
Did the check engine light ever come on for secondary 02 sensors not being plugged in?
Yes, it did. Luckily, it does affect the way the truck runs or drives. It just illuminates the check engine light.
@@rosstrittler been wondering this for a while. Only reason I haven’t gotten them. I have a 16 gmc same motor. Thank you for the reply!
@@iTzJxvtget it tuned and the light will go away. im doing this on my 16 definitely after this video😂
Gibson makes some great headers
Does it pass smog? I dot blame yiu for doubling up those jackstands Harbor Freight stuff is very junky. We’re the headers custom supposed to fit?
Definitely wont pass smog, but we don't live in Cali anyway.
Did you connect those to the stock exhaust past the y pipe? Or did it have an aftermarket exhaust already before you installed these? Looks like it was a badass mod well worth it.
He already had a 3in MBRP exhaust that we connected it to.
You guys are brave trusting those jack stands. You guys are shaking the dang truck around too 🤦🏿♂️
Don't jinx it
Getting ready to put my speed engineering longtubes. I'm in MO too, any problems with cops so far?
Haven't been pulled over yet, but they're pretty lenient around here with modified trucks.
That sounds freaking awesome!
Thanks!!
Just came across your channel super underrated 🔥💯
Appreciate that 🙏
Dude I just came across them! I truly enjoy the raw feeling.. vs a while cinematic episode.
@@rosstrittlerif I may ask for your advice, 20x14 13.50/55/20 35” tire I am not a tall guy at all 5’6 should I go level kit . & yes I’m so down to cut my truck up.. im having a hard time finding videos even photos with the set it considering. Any advice will help me understand what I should do.. yes I do plan on slapping a turbo in a making it street truck
@@rosstrittlermmm I reframe from the 20x14 I think 22x12 on 13.50 tires on a 1-2” level kit may be the way to go on 35” tire
I just installed the same headers on my 14 and for some reason it barely touches my steering shaft i have a little resistance when turning now did you have that problem? Imma have to clearance them tmr
We also had to clearance the steering shaft. We were able to do it with the headers bolted up in the engine bay.
Where did you get the 02 sensor extension and what length would I need
We got it off Amazon, but its not really necessary.
How has the torque converter been doing bro ?
Been holding up great so far.
Do you need cats in Texas? I’m trying to buy long tubes but there’s no point if ima keep cats
I'm not sure, but there's ways to get around it.
Does this have a stock cam ?
Yes it does.
Dope mod do oil catch cans next
Thanks! A catch can is definitely on the list.
What tail lights do you have?
I'm not sure, but they were $150 on ebay.
@ will take a look, would you recommend short headers or go with long?
Invest in flex head ratchet wrenches. Life saver
Definitely getting some
How much for the cats i have a p0430 on my chevy
My Instagram is in my bio if you want to dm me
I would have trashed them and went with speed engineering headers. Now u got flow restrictions.. no good
I don't think so, truck runs great.
Hello. This is Cherry from Coverado. Are you interested in working with us to try our Silverado floor mats and help us make a video?
Absolutely
@@rosstrittler We emailed you!
Now I am curious which one of you would win in a truck race..lol
It would be close, but I bet his would win
How’s that torque converter holding up?
It's doing great, no issues so far.
Nice drive way
That’s a lie bbk headers fit like a glove on my SS
Needs duals now
Thinking about it
@@rosstrittler x pipe dual it with black widows or dynomax race bullets.
Sounds good for a Chevy
Ya a BMW definitely sounds better
@@rosstrittlerno
Nasty