Back when I worked for a racing company building top-fuel engines, I used a 3/8 speed wrench more than any other tool. The wide use of cordless impacts had only been going on for a handful of years, and the ni-cad batteries were garbage compared to the Li-ion common today. Plus, the Snap-on truck that came around wanted a small fortune for one, so I got really good with the speed wrench instead. Working with all new or clean fasteners, you can get really good at spinning it one handed.
I found a pair of Standley adjustable saw horse's at the Restore the other day. The originals, before they redesigned them. They were marked 30$ a piece. A volunteer walked up and agreed they were way overpriced. Bought them for 25$ for the pair. Someone used them a couple times for painting, they still have that unused sticking factor. Been searching for another pair for quite some time. Thanks
Growing up my dad had a whole drawer in a Snap-On toolbox devoted to those I don't even remember how many he had I wish you gave me the toolbox instead of selling it
Gah that hurts to hear! Sorry! I've tried to make sure all my family knows to check with me before selling anything. I'm happy to pay if anything is being sold for need of money but 9 times of 10 it's worth more to me than they'd get from selling anyway so I'm happy to save what I can.
Hello again, Catus Maximus and Tiny Thank you for another Great Video 👍 I have a 1/4" drive and a 3/8" drive Craftsman Speed Handles. Initially, I thought the 1/4" drive would be very helpful. It turned out I was wrong. Anyhow, again thank you 👌
Another factor with aircraft inspection panels, is you don't want a Phillips bit getting loose and 'skating' all over the surrounding skin... especially if AlClad is involved! Also, speaking of speed handles, check out Koken's combination speed handle breaker bar, the 4781N-450. I have one on my list waiting for their next big sale.
Use those in stamping dies as well. When they get pulled in for service you've got several recessed bolts in every detail. With all the grime, metal splinters, etc, you're shaking hands with danger to use power tools to whip those bolts in and out.
I bet most speeders are used less than most sockets; maybe that's why the square drive and detent is tighter - less wear. Just a guess. I kind of want one but I'm it sure what I need it for; not much that I need to fasten quickly but also have that much clearance to approach closely
Ah. Many fond memories of pinching the hell out of my pinky finger with that Craftsman speedwrench on the far left 😂
Back when I worked for a racing company building top-fuel engines, I used a 3/8 speed wrench more than any other tool. The wide use of cordless impacts had only been going on for a handful of years, and the ni-cad batteries were garbage compared to the Li-ion common today. Plus, the Snap-on truck that came around wanted a small fortune for one, so I got really good with the speed wrench instead. Working with all new or clean fasteners, you can get really good at spinning it one handed.
"Plus, the Snap-on truck that came around wanted a small fortune for one"
That's no different from everything else they sell.
I found a pair of Standley adjustable saw horse's at the Restore the other day. The originals, before they redesigned them. They were marked 30$ a piece. A volunteer walked up and agreed they were way overpriced. Bought them for 25$ for the pair. Someone used them a couple times for painting, they still have that unused sticking factor. Been searching for another pair for quite some time. Thanks
Great information I seen these at a goodwill and I knew they were special so I bought them and now I now some good information on them thanks to you
It's always nice to find a hidden treasure at a thrift store!
Thanks for the considered information 🇬🇧
Growing up my dad had a whole drawer in a Snap-On toolbox devoted to those I don't even remember how many he had I wish you gave me the toolbox instead of selling it
Gah that hurts to hear! Sorry!
I've tried to make sure all my family knows to check with me before selling anything. I'm happy to pay if anything is being sold for need of money but 9 times of 10 it's worth more to me than they'd get from selling anyway so I'm happy to save what I can.
I have many. They never ever get used now that I have a Milwaukee impact and etc.
That Craftsman 1/2” speed wrench came as part of a mechanics tool kit I purchased in 1973. It’s unused and still lives in my bottom box!
Hello again, Catus Maximus and Tiny
Thank you for another Great Video 👍 I have a 1/4" drive and a 3/8" drive Craftsman Speed Handles. Initially, I thought the 1/4" drive would be very helpful. It turned out I was wrong. Anyhow, again thank you 👌
Another factor with aircraft inspection panels, is you don't want a Phillips bit getting loose and 'skating' all over the surrounding skin... especially if AlClad is involved!
Also, speaking of speed handles, check out Koken's combination speed handle breaker bar, the 4781N-450. I have one on my list waiting for their next big sale.
I use mine when working on valve covers or oil pans
Those are some pretty good applications for a speed wrench.
Nice collection, I have the Craftsman and a Pittsburgh. I'll have to get them side by side and see the difference. Thanks Catus
I bet there's a noticeable difference!
Use those in stamping dies as well. When they get pulled in for service you've got several recessed bolts in every detail. With all the grime, metal splinters, etc, you're shaking hands with danger to use power tools to whip those bolts in and out.
I can see how those wrenches would be useful in that situation.
I bet most speeders are used less than most sockets; maybe that's why the square drive and detent is tighter - less wear. Just a guess.
I kind of want one but I'm it sure what I need it for; not much that I need to fasten quickly but also have that much clearance to approach closely
To 50k subs 🍻
Cheers!
✌️