1. Switch the ignition on. 2. Press the power door unlock button three times. 3. Switch the ignition off. 4. Press the power door unlock button three times. 5. Switch the ignition on. The horn will sound indicating the programming mode has been entered.everything is ok here
Hello for me, after entering the programming, if I press unlock and lock, nothing happens, only if I press first lock and then unlock, the horn beeps twice, but the doors don't close when locking, why?
On 2018 ST's this is only temporary.. Once you disable autolock, you have one drive cycle where it works. Once you stop, shut the car off, then start the car again, the autolock is re-enabled. The only way to permanently disable autolock at least on my '18 is through Forscan in the Module and Programming Section > BodyCM > Central Configuarion (Main) > scroll to Autolock - and set to Without Autolock.
Hi! Help, please!! I have got a Ford Focus registered in November 2016 and I followed your procedure step by step but can't get my auto-lock on!! I just arrive to earing ONE HORN but then... nothing happens!! Can you help me? Thank you!!
For anyone trying and trying in the EU.. from 2019-2020 up most car models do not support the auto-lock when driving anymore by law or voluntary advised by authorities to take out this option for car manufacturers. The only option could be enabled with OBD software.
hi, i have an focus mk3 2015 ( october ), it enters in programing mode, but i can't enable auto lock. I've pressed quickly the unlock and lock buttons and still nothing. help plz
Goodnight friend I have a ford focus st line tdci 2018, but I can't block the ports in progress, according to your video. Will the procedure be different for 2018? Thanks in advance for your time. carefully Felisberto
You should make a video for how to add backup camera! Doesn't cost much at all! I'm about to do it this weekend once I get the pins needed to add the two wires to the back of the touchscreen.
I have everything already installed. Only have to program and add the pins which don't come in till this weekend I'm hoping. I will try to remember to film it.
TORQUE & TECH wasn't hard. just routing wires from the front to the back and the worst part was the hatch trim. My god those vampire clips are a nightmare.
Hello I have a quick question,I jus bought a ford mondeo 2007 and the last owner told me if a leave the car with my key in the pocket the car will lock itself,I tried but it doesn't work. Can this feature be enabled somewhere in the car settings?
+Csk Kido Hmm. If you have a gauge cluster that you can control with steering wheel buttons check there. I'm sure you can manually lock it, but I'm not sure how to enable auto lock in that sense. Also check the manual that'll be a great help.
So I actually just bought a 16 focus st and i have a quick question. On my old car, there was a button that would make it so all the lights would stay turned off when i opened the door or a passenger opened the door. Is there anything like this on this car? If so could you point me in the direction of what its called?
+Riley Yes. Look up at roof of the car between the driver and passenger seats. There is a light and then three buttons. There should be a button labeled off. Mine does not have ambient lighting nor a sun roof. It should still be in that area if you have these options though. Let me know.
OMG thank you soo much!!!!! It worked like a charm! I appreciate the help and i look forward to more videos on the ST! Especially mod info/installs and tips with the technology that it has such as this one! Hopefully you were planning on doing some more of those lol!
@@TechnationXyz I have the ELM327 Bluetooth, Should I pay for the ForScan Lite, so I can do some programming? Or instead, I use the Foccus app? I wasn't able to open it using my mobile (Android). Best regards.
@@TechnationXyz to lock the stearing wheel from moving. Most ignition style cars you turn the wheel once the ignition it off an the stearing wheel will lock into position. Can't figure it out with this car?
@@ryanfield3175 you probably already know this after 3 years but just incase someone else has the same question. On keyless models, once you leave the car with the key, the steering lock automatically engages. On models with a keyed ignition, you just have to take out the key and slightly turn the wheel for it to lock.
I wanted to enable the auto lock feature on my Focus, but no matter how I tried it only honk once, I heard this feature is disabled in UK model? anyone can confirm? thanks
Hi have tried this in a 16plate and a 67 plate , still don’t work . I only get two beeps when I go from lock to unlock not unlock to lock 😡😡. Went to my local ford dealers and said they don’t do this feature on any fords 😂😂..
Hello i tried this and when I use the lock and unlock at end of sequence it honks twice to say activated but when I do unlock lock at end of sequence there are no honks at all
TORQUE & TECH yeah that's where I got the idea because my car came already with the wheel wells the cup holders the door panels where the rainbow colors the dome lights are the only ones that's white which last night I pulled them open and they got the little brain board on top and it doesn't have the bulb removal like he showed in his video
+BEYAZ Tuncay Maybe your car doesn't have it then. You should be able to go through the steps again and hear two honks the second time. If you don't then I guess it's not there.
+BEYAZ Tuncay The auto lock feature is only for when the vehicle is moving over 4mph and the doors lock. If you go through the steps and push unlock and then lock and you hear 2 honks then it's enabled. If you hear two honks but the doors do not auto lock while driving then I don't know what's going on.
hi, after entering programming mode and pushing unlock-lock there is no response from the car. the lock-unlock combination does the toggle (to auto-unlock off or unlock on) but the auto-lock on or off does not... do you think that it is not equipped on all vehicles ? btw, mine is a 2018.01 Focus. Thanks !
1. Switch the ignition on.
2. Press the power
door unlock button three times.
3. Switch
the ignition off.
4. Press the power door unlock button three times.
5.
Switch the ignition on. The horn will sound indicating the
programming mode
has been entered.everything is ok here
thanks a lot, my Ford dealer said it was not possible ...
Now I’ve managed to program my car’s autolock
direct to point...u talk to much brow...
Yup
Hello
for me, after entering the programming, if I press unlock and lock, nothing happens, only if I press first lock and then unlock, the horn beeps twice, but the doors don't close when locking, why?
Do this work on a euro spec focus? I halve tryd. The car signals the horn. But nothing is happening 🤷♂️
On 2018 ST's this is only temporary.. Once you disable autolock, you have one drive cycle where it works. Once you stop, shut the car off, then start the car again, the autolock is re-enabled. The only way to permanently disable autolock at least on my '18 is through Forscan in the Module and Programming Section > BodyCM > Central Configuarion (Main) > scroll to Autolock - and set to Without Autolock.
Hi! Help, please!! I have got a Ford Focus registered in November 2016 and I followed your procedure step by step but can't get my auto-lock on!!
I just arrive to earing ONE HORN but then... nothing happens!!
Can you help me?
Thank you!!
You have to activate it in the Module with ForScan
For anyone trying and trying in the EU.. from 2019-2020 up most car models do not support the auto-lock when driving anymore by law or voluntary advised by authorities to take out this option for car manufacturers. The only option could be enabled with OBD software.
I m trying this on my 2021 focus see if it works but you got 👍🏻 for your patience
It worked?
hi, i have an focus mk3 2015 ( october ), it enters in programing mode, but i can't enable auto lock. I've pressed quickly the unlock and lock buttons and still nothing. help plz
Your a wizard bro!
+Koriginal ST Lol! 👍
Appreciate it man 👍🏽🍻 beers on me when your in Australia!
No problem man. And Awesome haha!
Goodnight friend I have a ford focus st line tdci 2018, but I can't block the ports in progress, according to your video. Will the procedure be different for 2018? Thanks in advance for your time. carefully Felisberto
You should make a video for how to add backup camera! Doesn't cost much at all! I'm about to do it this weekend once I get the pins needed to add the two wires to the back of the touchscreen.
+SrgBlackburn Mine already has one. You gotta film your process this weekend.
I have everything already installed. Only have to program and add the pins which don't come in till this weekend I'm hoping. I will try to remember to film it.
SrgBlackburn ahh ok I see. I was thinking you didn't have everything installed just yet.
TORQUE & TECH wasn't hard. just routing wires from the front to the back and the worst part was the hatch trim. My god those vampire clips are a nightmare.
do you know how to disable the door chime? that my next thing. Hate the sound when I'm working on the car and need ACC to be on.
Ok, how do I program another key fob in a 2008 xr5 lv focus. Can't find anything out there. Cheers
Hello I have a quick question,I jus bought a ford mondeo 2007 and the last owner told me if a leave the car with my key in the pocket the car will lock itself,I tried but it doesn't work. Can this feature be enabled somewhere in the car settings?
+Csk Kido Hmm. If you have a gauge cluster that you can control with steering wheel buttons check there. I'm sure you can manually lock it, but I'm not sure how to enable auto lock in that sense. Also check the manual that'll be a great help.
Mines not beeping twice when trying to enable it, only beeping once no idea why
So I actually just bought a 16 focus st and i have a quick question. On my old car, there was a button that would make it so all the lights would stay turned off when i opened the door or a passenger opened the door. Is there anything like this on this car? If so could you point me in the direction of what its called?
+Riley Yes. Look up at roof of the car between the driver and passenger seats. There is a light and then three buttons. There should be a button labeled off. Mine does not have ambient lighting nor a sun roof. It should still be in that area if you have these options though. Let me know.
OMG thank you soo much!!!!! It worked like a charm! I appreciate the help and i look forward to more videos on the ST! Especially mod info/installs and tips with the technology that it has such as this one! Hopefully you were planning on doing some more of those lol!
Riley You're welcome. I'm hoping to have more mods up in the coming weeks. When my money is not as tight I'm hoping to put more into the car.
For sure man, I actually have youtube red lol so ill give you a couple more cents a minute by watching if ur monetized or w/e lolol. Good lookin man!
Riley Awesome! I was wondering if people who watch my stuff have TH-cam Red. I have it too, I love it.
Hi, I got a 2016 Ford Focus SE, is there a way to enable global opening windows using the remote? Best regards.
That's a great question I'm not sure about that with the regular Focus models. I think it depends on what key fob you have.
@@TechnationXyz I have the ELM327 Bluetooth, Should I pay for the ForScan Lite, so I can do some programming? Or instead, I use the Foccus app? I wasn't able to open it using my mobile (Android).
Best regards.
LEGEND MAN
+elmin2323 👍
i have ford focus 2016 trendx. i want auto lock doors. but how can i? please help me
New to the focus here. I have 2017 ST3.5.
Probably a stupid question but how do I activate the stearing column lock?
Any help appreciated
I'm not too sure what you mean by this. Can you explain a little more? Hopefully I can help.
@@TechnationXyz to lock the stearing wheel from moving. Most ignition style cars you turn the wheel once the ignition it off an the stearing wheel will lock into position.
Can't figure it out with this car?
@@ryanfield3175 you probably already know this after 3 years but just incase someone else has the same question. On keyless models, once you leave the car with the key, the steering lock automatically engages. On models with a keyed ignition, you just have to take out the key and slightly turn the wheel for it to lock.
Hi there, nice video. What's the infotainment system in your ST? Mine is very different from that...
+Bruno David it's the Sync 3 system. Comes with 2016+ Focus STs and other Ford models.
TechNation oh I see... Is there any chance of upgrading to this one with a 14 model? It looks different, don't know about the features though...
Thanks again =) Have you had your dealer enable global windows?
Thank you so much
You're welcome.
Saw you on a ad lol
+RomanAtwoodVlogs A lol the shortest ad ever!
I wanted to enable the auto lock feature on my Focus, but no matter how I tried it only honk once, I heard this feature is disabled in UK model? anyone can confirm? thanks
Any update mate?
Did the racing stripe come stock ?
+HaRdStYlEkIlLa7 it's not stock. It's from the factory, but it's extra. I think almost 500 or so. I can't remember off the top of my head.
Hi have tried this in a 16plate and a 67 plate , still don’t work . I only get two beeps when I go from lock to unlock not unlock to lock 😡😡. Went to my local ford dealers and said they don’t do this feature on any fords 😂😂..
Hello i tried this and when I use the lock and unlock at end of sequence it honks twice to say activated but when I do unlock lock at end of sequence there are no honks at all
Maybe you just need to add the fuse and if it's wired it'll work for you.
يا رب يارب ياربي ترزقني هذا السياره بحق هذا المطر يا الله الصمد .
In EU version this trick not working. Horn play but function not work.
TalRash ...i try it five times at my german focus from april 2016. it dosn't work. :(
TalRash same here, 2018 C-max, everything seems to work as described (programming mode, horn etc.), but the settings don’t change. :/
euro version you need to use odb interface like eml327. Allows you to enabled various options. Worked on mine
@@fruitycoconut how can we do it in euro versions? Help please!!!
how bout changing the 2 dome lites on each side of the sunroof?
+SrZx10 Mine doesn't have the sunroof. If you look for the interior lights video by Koriginal ST he has some info that could help.
TORQUE & TECH yeah that's where I got the idea because my car came already with the wheel wells the cup holders the door panels where the rainbow colors the dome lights are the only ones that's white which last night I pulled them open and they got the little brain board on top and it doesn't have the bulb removal like he showed in his video
on European version the horn sound only 1 time :( damn
First press the unlock button then the lock button. But a single horn sounds. why i dont understand
+BEYAZ Tuncay A single horn sound means that the feature is disabled. If it sounds twice then it is enabled.
ok understand but i don't hear 2 the horn sound
BEYAZ Tuncay so you don't hear two honks at all? Even when you go back through the steps?
First press the LOCK button then the UNLOCK button. When I do this I hear two horns
BEYAZ Tuncay good. Now it's enabled. Once you start driving the doors will lock automatically when you hit 4mph.
I use manual, autolock is dangerous in some situations
I'm 23
i did the same. but the horn only playing
+BEYAZ Tuncay so you're getting the horn confirmations but not seeing the auto lock enable?
why i can't this.?
İ don't hear 2 horn, this is probleme. İ hear just one horn sound
+BEYAZ Tuncay Maybe your car doesn't have it then. You should be able to go through the steps again and hear two honks the second time. If you don't then I guess it's not there.
DIY wing riser! Cost 5 bucks lol
+Jose Carrasco I've seen people talk about this before. Do you know what materials to get? Or can you point me to some more info on a forum somewhere?
Ford transit auto lock
i tried but not work
Double check the manual for yours. I know the way it's done is slightly different between models.
ok but i want auto lock doors.
+BEYAZ Tuncay The auto lock feature is only for when the vehicle is moving over 4mph and the doors lock. If you go through the steps and push unlock and then lock and you hear 2 honks then it's enabled. If you hear two honks but the doors do not auto lock while driving then I don't know what's going on.
hi, after entering programming mode and pushing unlock-lock there is no response from the car.
the lock-unlock combination does the toggle (to auto-unlock off or unlock on) but the auto-lock on or off does not...
do you think that it is not equipped on all vehicles ? btw, mine is a 2018.01 Focus.
Thanks !
U talk way too much....