ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To: Yamaha 75/90/115 4 Stroke Outboard Winterization
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2022
- Hey Everyone, today I show the drain procedure that I personally do on Yamaha Outboard’s and the oil changes i do to get the Outboards ready for winter. I explain the different storage Oiling procedures and stabilizer recommendations. I forgot to mention in the video that you do not want to fog these engines and coat your intake and injectors/ sensors with oil. It will cause you issues. Hope this video helps! Josh
![[TH]FFWS SEA 2024 Fall - Knockout Stage Day 1](http://i.ytimg.com/vi/nsDmUQdWVtg/mqdefault.jpg)
Nice video, fogging these things is always subjective and you get different opinions from different people. I run a 2 stroke cocktail through by disconnecting the output side of the water separating filter that’s mounted in the boat. Saves messing with the fuel line under the engine cowling. Most people I boat with don’t bother with fogging at all. Can’t say that I’m aware of any problems any of them have ever had that I could attribute to internal surface corrosion from not fogging, and some of the engines in question are getting on for twenty years old. Hard to know for sure though. Takes 10 minutes to fog it though, so I do it.
It would be cool if you made a video on how to build your diy pressurized gear oil filler. Details on where to find the various components would be helpful.
TH-cam can hjem yamaha 115ht
Perfect video. I'll be doing this next month.
Perfect! You could not have done better... Thank you.
the best video on this subject I've seen to date - great job
This is exactly what I needed. Thank you
gday mate this is a really good video showing how to do things it is the first one ive seen about showing the anodes and what they do . Did you replace that really manky one the way it was corroding not long before it may break off . the puritins will be having a fit " your not using genuine parts or oil you motor will be ruined " i will be taking delivery of a 40hp 2022 model with fuel injection this is the first 4 stroke outboard i have owned and videos like this help me get an idea of where things are and what to check and i have to say i have done my oil services on all my car and bikes since i was 16 now 63 saves a lot of coin and you know your engine again great video .
Very important to take care of your outboard.
Great demo..... Thanks😀
thank you!
Great vid. Thanks a lot. About how much oil goes into the lower unit?
Thank you. Probably somewhere around 500ML
RTFM
Can you do the oil change in the spring?
You can for sure.
Hello , I’d like to purchase the three yamha 90 or 75hp. Where to buy used or new ?
What’s the reason behind not wanting to fog them? Presuming this applies to a T50 4-stroke,l.
Hey, so not fogging because with the 4 stroke stuff we have IAC sensors in the intake and injectors that it can bung up. I believe it causes mote harm then good. You can pull the plugs and spray oil in the cylinders. Or run 2 stroke oil through the fuel system with a seperate tank.
The 2022 115 4 stroke owners manual says to fog with fogging oil spray ( not " the mixture") right thru the port on engine while running. This might be different on the 2 strokes or older like 2017? In your video. I'll be trying it for the first time tomorrow at 61 hours..before putting it away in garage for Winter. My Oil changes get done in Spring as a rule.
Ignorant question perhaps but do you use the same oil you put in the engine for the lower unit?
you need gear oil as it's has a higher viscosity that protects the inner gears
@@stephenbyce
Thanks!
I didn’t know yamaha made a 75 hp?yeah looks like 10,600$
Hey, yes they do. They are essentially a detuned 90 if getting technical. Have seen many over the years.
@@Schneids15 ok cool