I use a boot dryer to dry mine out after I wash them. Not sure if ya need those down south much but up here in the Northwest boot dryers are pretty handy.
Went thru 3 std paper filters in my 950 over 4500 miles. $55 a crack. Just installed one of these yellow UNI pre-oiled filters. Fit my machine perfect....at $100 I'm on my way to a savings for my next 4500 miles. Great quality....and just like the American versions....they also come with a couple stickers.
Hi there i ordered an air filter from you for 2024 cfmoto zforce 800 trail g2 i didn't get the one i ordered i wanted the one were the foam comes off to be cleaned and got the other .didn't realize it was the wrong one until i oiled it all up.
I bought the uni filter from rng performance i have a 2023 uforce 1000. I notice the filter has the red foam sleeve but the filter is a few inches shorter than the stock filter. Just wondering if i have the correct filter. No.paperwork was sent on the shipping box or inside it. It fits on the neck fine but it is shorter than the stock filter. Thanks.
@@R.N.GPerformance ok awesome thanks. I got some of the spray on the damn rubber neck so thinking I need some mineral spirits to clean it. Went to tighten the clamp and filter would slide off lol. Rookie air filter putter onner lol. Thanks for the informative videos just bought my new Uforce 1000 love it so far.
Just purchased my first UFORCE 1000 and found your channel...1st of all...THANK YOU. Your videos are tremendously helpful. In this video you mention maybe doing a "wiring 101" video. Have you done this? I would really love to see something like that. My question is does your machine charge the 2nd battery while running? - thanks again. Joe
Is it supposed to be so tight of a fit? Of corse your vantage point is better than mine. But it took two people on each side to get it to seal on mine. That support on the lid is smashed up against the filter.
They are a snug fit. I’m working with Curren RV to get this resolved. It’s not like that on all machines so we don’t know if it’s a air filter issue or a CFMOTO air box issue.
I got it now we talked on FB. Just needed to get a better vantage point . Reached over the fire wall I did not have the filter all the way up on the flange.
I bought one of those filters. Exact part number. Just got it in and the flange on the filter is to small to stay on. Keeps popping off, even after tighting the hose clamp. This is on a 2022 uforce 1000.
Did you clean the oil off the inside of it? Clean that off and it won’t pop off. All uni filters do this if there is oil on the rubber. Even your stock one would do it if it was a oiled filter.
Much better. Wow, there was alot of oil in there. Must of been the oil on the foam that soaked it. Took some mineral spirits and cleaned it. Thanks Red
Bought a uni style filter from MSC their version of it and can’t get it on the tube I feel like I’m going to tear the filter trying to get it on. Does your filter slide on the tube easy like the oem paper filter does?
What makes you a customer of cfmoto. I just don't want to jump on band wagon. And be out 15,000. Besides a new clutch and tuning what will need to be done and change or antifreeze?? Warranty Price ???
K&N don’t filter out as small of particles as a Uni filter does. Huge difference between the filters. And on the K&N box if you look on the back it says warranty void if used Offroad.
I dont disagree with your opinion but I can say this! I live in Australia and have run K&N filters for over 15 years in my 4WD vehicles. I have been to the tip of Australia multiple times I have gone through the Simpson Desert I have been through the Northern Territory! Google Australian bulldust mate it will make my comment more relevant. I do not for one second believe K&N filters let through any more or less than other filters! I believe user error has far more to do with it. I do not advocate for K&N by any means I just think they are getting a bad wrap from people who should really not be using then or for that matter ever pick up any form of tool to do any form of servicing! Just my opinion mate!
They actually do. And K&N has it right on their box. Warranty void if used off-road. Check out project farm he proves this We also ran K&N for years on the race track but we were also rebuilding engines frequently on the 2 strokes. Not because of the filter but because we beat them hard lol
@@R.N.GPerformance K&N isn't where your vehicle warranty comes from. Maybe learn how to use tye product correctly, before disparaging a superior product, while attempting to sell yours. This man puts you to shame. th-cam.com/video/QK6ZE06Z5hM/w-d-xo.html
Just purchased a UNI for my XL.
Game changer in dusty environments
Your my CF MOTO guy. for all my Z force stuff big fan. Love the U force build videos
Thank you 🙏. It’s definitely coming along.
Funny story on the filter , to error is human Red ! Checking your site for a uni- for my force 800 !
Thank you 🙏.
I use a boot dryer to dry mine out after I wash them. Not sure if ya need those down south much but up here in the Northwest boot dryers are pretty handy.
Well, I’ve learned something new today !!!
Right. We all learn new things every day.
Went thru 3 std paper filters in my 950 over 4500 miles. $55 a crack. Just installed one of these yellow UNI pre-oiled filters. Fit my machine perfect....at $100 I'm on my way to a savings for my next 4500 miles. Great quality....and just like the American versions....they also come with a couple stickers.
I agree worth every penny for sure.
Yes i know I still needs one ☮️
Awesome let me know when you get the 950s filter in stock
They could be soon. Curren said a few weeks hopefully soon as they have them I’ll have them. Thank you 🙏
Do you have a video for the uforce 600 air filter change
Looked for it on your website, but didn’t find it. Need uni filter for UForce 1000
Here it is. I’m out of stock until tomorrow when my delivery gets here. rngperformance.net/shop/ols/categories/air-filters
I like kn. Lifelong user.
Not only is that filter easy to get at, it's in a good spot compared to the 800 ex.
I agree ☝️
Question i just install a unifilter and notice my cover dont have a seal do they supposes to come with one or that separate?
Supposed to come with one. Allot of folks had missing seals.
Hi there i ordered an air filter from you for 2024 cfmoto zforce 800 trail g2 i didn't get the one i ordered i wanted the one were the foam comes off to be cleaned and got the other .didn't realize it was the wrong one until i oiled it all up.
Our G2 filter don’t have a removable outer filter. There is only 1 uni filter we offer for that unit.
@@R.N.GPerformance how do you clean it and apply the oil?
I bought the uni filter from rng performance i have a 2023 uforce 1000. I notice the filter has the red foam sleeve but the filter is a few inches shorter than the stock filter. Just wondering if i have the correct filter. No.paperwork was sent on the shipping box or inside it. It fits on the neck fine but it is shorter than the stock filter. Thanks.
You have the correct filter.
@@R.N.GPerformance ok awesome thanks. I got some of the spray on the damn rubber neck so thinking I need some mineral spirits to clean it. Went to tighten the clamp and filter would slide off lol. Rookie air filter putter onner lol. Thanks for the informative videos just bought my new Uforce 1000 love it so far.
@@geraldnichols1853 your welcome yeah make sure that’s clean and don’t tighten too much they just need to be snug is all
@@R.N.GPerformance ok thanks
Just purchased my first UFORCE 1000 and found your channel...1st of all...THANK YOU. Your videos are tremendously helpful. In this video you mention maybe doing a "wiring 101" video. Have you done this? I would really love to see something like that. My question is does your machine charge the 2nd battery while running?
- thanks again.
Joe
Do u ship to Canada
I sure do
Hey Steve what kind of tires did you get for uforce and where did you get them tks?
Hello there. I’ll send links. amzn.to/3F1rH5d
amzn.to/3h0YcbE
Tks buddy
I am wondering about using lucas oil instead of cf moto?
CFMOTO don’t make foam filter oil that I know of.
Can you give me the link to the uni filter for uforce 1000xl. Can't find it?
I sure can. rngperformance.net/shop/ols/categories/air-filters
They specifically say to oil the filter before its first install in the manufacturers instructions.
These ones are pre oiled and ready to go. The regular uni you must oil first.
What is the Uni part number for the 2022 Uforce 1000? I can't find anything on their website for CFMoto.
I have them on my website www.rngperformance.net.
Is it supposed to be so tight of a fit? Of corse your vantage point is better than mine. But it took two people on each side to get it to seal on mine. That support on the lid is smashed up against the filter.
They are a snug fit. I’m working with Curren RV to get this resolved. It’s not like that on all machines so we don’t know if it’s a air filter issue or a CFMOTO air box issue.
I got it now we talked on FB. Just needed to get a better vantage point . Reached over the fire wall I did not have the filter all the way up on the flange.
I bought one of those filters. Exact part number.
Just got it in and the flange on the filter is to small to stay on. Keeps popping off, even after tighting the hose clamp.
This is on a 2022 uforce 1000.
Did you clean the oil off the inside of it? Clean that off and it won’t pop off. All uni filters do this if there is oil on the rubber. Even your stock one would do it if it was a oiled filter.
No, I didn't. I'll try that. Thanks
Much better. Wow, there was alot of oil in there. Must of been the oil on the foam that soaked it. Took some mineral spirits and cleaned it. Thanks Red
Is this 111130 for the 2023 1000xl? I’m confused. What year is the one your working on?
No. 23 is different. We have one that fits the 2023 on our website Www.rngPerformance.net
Bought a uni style filter from MSC their version of it and can’t get it on the tube I feel like I’m going to tear the filter trying to get it on. Does your filter slide on the tube easy like the oem paper filter does?
Yeah their filter don’t fit. We are the only ones that sell a filter that actually fits. Www.rngPerformance.net
Perfect I’m ordering from you then!
What makes you a customer of cfmoto. I just don't want to jump on band wagon. And be out 15,000. Besides a new clutch and tuning what will need to be done and change or antifreeze??
Warranty
Price
???
what is the difference they both are oiled filters. how is is that K&N lets in more dust
K&N don’t filter out as small of particles as a Uni filter does. Huge difference between the filters. And on the K&N box if you look on the back it says warranty void if used Offroad.
Can i get a part number on one for a 950 H.O. ex
It’s on my website buddy www.rngperformance.net no one has any right now. All stock is out. Soon as they come in tho folks will be stocked back up.
Idk what the other filter is
What’s the part number?
It’s all listed on my website www.rngperformance.net
Who's the other vendor?
?
@@R.N.GPerformance Nevermind. I don't need to be instigating things. Lol
I was wondering too. Not sure if I bought one of those "other vendor" ones.
@@CF-BRADY if it’s a red one it’s the other venders filter
@@R.N.GPerformance They make the correct one now. it fits great!! And it is Uni filter in America
I dont disagree with your opinion but I can say this! I live in Australia and have run K&N filters for over 15 years in my 4WD vehicles. I have been to the tip of Australia multiple times I have gone through the Simpson Desert I have been through the Northern Territory! Google Australian bulldust mate it will make my comment more relevant. I do not for one second believe K&N filters let through any more or less than other filters! I believe user error has far more to do with it. I do not advocate for K&N by any means I just think they are getting a bad wrap from people who should really not be using then or for that matter ever pick up any form of tool to do any form of servicing! Just my opinion mate!
They actually do. And K&N has it right on their box. Warranty void if used off-road. Check out project farm he proves this We also ran K&N for years on the race track but we were also rebuilding engines frequently on the 2 strokes. Not because of the filter but because we beat them hard lol
As soon as you said do not use the K&N. I knew not to follow your advice.
Ok 👌 😂 maybe you should read the k&n warranty on the box. Maybe not follow that also? 😂 😂 goofy people everywhere. Can’t help them all.
@@R.N.GPerformance K&N isn't where your vehicle warranty comes from. Maybe learn how to use tye product correctly, before disparaging a superior product, while attempting to sell yours. This man puts you to shame. th-cam.com/video/QK6ZE06Z5hM/w-d-xo.html
I used to put K&N filters in street vehicles, but stopped after watching this video from Project Farm. th-cam.com/video/sJ3L-E-ufYo/w-d-xo.html
Absolutely 👍. They aren’t that good. They are only good for maximum airflow and keeping big particles out.