That was awesome Hank willy is the man I still think willy is better looking than Kim k. 😂🤣😆 God bless to you and your family's. Great work keep it up.
Hank if you and,your lovely wife Gina get a, chance to watch the movie called Black Dog cause that's were I picked up phrase Nothing runs better like a,Caterpillar engine Hank even though you driven a,few Trucks back in the day you would still be a, Awsome Truck driver 10-4 buddy
@@jasonleeloveless2183 Yes, Jason I get that. I've run Cat 3406s in trucks, scrapers and even motor graders. And yes, I saw Black Dog in the theater in 1998, I'm familiar with the movie quote. I said, "but...nothing screams like a Detroit.." The word "but" is a claus, an inserted uncertainty. That was a joke, but I still stand by what I joked about, nothing screams like an olde Detroit, discussion closed....
Awesome truck to work on, my dad has over a million miles on his 03 Peterbilt 379, running strong. He only swapped his CAT engine to a 2013 or 14 Cummins due to CA smog laws which is a huge bummer. I miss listening to the old engine brake too.
YES big bummer about Ports in LA area. Will not let a truck on Port property unless it's brand new or has a inspection. Very hard on guys buying a used class 8 to just move cantainer from Port to Port, big demand for that as Ships will unload at one LA port, fast turn around, then they steam to sea. The cantainer just needs to be moved to Long Beach. Good jobs for guy starting out with a affordable used truck. But now he must meet these strict emission standers with his truck, just to go on Dock Port Property. Plus there a charge to truckers for Air pollution, that truckers have no control over.
Hank, I spent quite a few years at the Pete dealer in Auburn Hills Michigan, what determined a long or short nose Pete was front axle location....I remember when Cat went from the mechanical injection to electronic injection..be safe!! May the Lord Bless ya'll!!!
Those paperwasps have a very nasty sting, I use spraypaint or brake cleaner on them. Love your battery set up, good tight connections, especially on 12 Volt systems. 500 or 600 Amps will make a bolt glow very quickly. Great start. good engine.
long nose versus short nose is pretty easy to identify from the outside of the truck with petes. long nose the hood extends past the front wheel fender arch at the cab, while on the short nose the fender arch meets the end of the hood at the cab
A good wasp spray is about 1/4-1/2 cup of Dawn dish soap in a gallon of water in a pump up garden sprayer. Or mix up a small batch for use in a hose fed garden sprayer container. Add the soap to the water; not the water to the soap to keep foaming down. This mixture will knock out the wasps just as fast as the chemical spray stuff and is a lot cheaper. You can also add peppermint extract to the mixture to keep wasps from returning to the nest since they do not like the smell. And you don’t even need a Crescent Wrench or Vise Grips to do this!
Heinz Guderian's tactics against American Killer Wasps: a flamethrower! Lol! But seriously, I have a tip for you: what about applying some grease or Kroil to the terminals? That should ease contact a bit, as you need as much power as possible to get old engines turned over!
The people that say brake clean for wasp killer are correct. It melts their wings and exoskeletons, AKA DEAD wasp!! I drove for over 20 years and have 3, 1 million mile safety awards. I put 2.5 million on a L9000 Ford day cab. It had a super 300 cummings and was a fast truck, 76 mph all day long. It's all in the pump settings, it still got got the best mpg of the whole fleet!!
Thanks for the Awesome startup video, nothing more satisfying than an old diesel coming to life. How’s the ram been treating you? I know someone who is thinking of buying a new gen aswel.
Hola buen día cuando una persona le tiene amor la cosa que uno haser es lo mejor que aprende el otro siempre estás mirando algo nuevo me gustó un abrazo a ustedes gracias Marcelo de argentina
The short nose, part of the engine is under the Cab(I would call them the "FOOT WARMER") My Dad used a 1967 INT Day Cab, to haul grain, a 4 hour around trip. How he keep his on the gas, I'll never know, because the heat would heat up the foot
Let one of those so-called fuel-efficient rigs nowadays sit for 2 years it would never start but these old girls like that Peterbilt far up with some loving care thanks for the video
You can tell the difference between a long hood and short hood by the front fenders. If it has a filler panel between the cab and fenders like this truck has it's an extended hood. If the fender goes right into the body it's a short hood.
A Million Miles??? It's just getting comfortable now! Everything knows it's place, it flows and it works good. We'd get them warm to operating temp, a little higher than idle, and sprinkle Comet like a dust cloud over the air intake, about 4 cups, then drizzle 3 quarts of Automatic transmission fluid down the intake keeping the idle up just a hare, not too much to overrun the engine. With all the smoke there wasn't a mosquito for miles😂, but the comet broke loose all the caked oil and grime on the rings while gently honing the cylinder walls, and the ATF goes through and washes it clean as well as removing carbon around the valves and injector tip. Usually wakes them up again. Then a cup of graphite powder in the manual transmissions to wake up the synchros and you've got harmony again, we called it "Fingertip Floating" the gears.
Easiest was to see if it's a long or short nose is the hood behind the front tires will be about 13 to 14 inches wide from the over fender to the cab. On a short nose fender is dam near flush with the rear of the hood and cab. It's that easy I could tell right away that this was a long nose. I drove peterbilt for 6 years. Had both. Then ended up with a 579 slant nose. Sure miss seeing that hood in front of me.
Sure ain't. I cant even see the hood sitting up. I'm no 1st year driver so I dont put any air in the seat!! U can always tell a rookie driver. They be sitting with all the air in that seat lol hitting their head on the headliner! Shoot in my 379 sitting on the floor u couldnt see me from the drivers side window! People said I looked like a little kid driving!
Seems like Hank would at least park the truck on the side with the batteries, Wiley, might help you a little bit brother! lol 😂 y’all need a jump pack, might help!
Thats a short nose or what they called a 378 back then. Theres about 10 or 12 inches more hood extension from the windshield to the hood. Starting fluid will drop their butts
The 3406 Cats are really great engine, the only thing I don't, like is replacing the water pump, Man what a pain in the rear. Never seen pressure on a cooling system for 2 years, That's odd!!
I have the opportunity to buy the very first truck I ever rode in. It's a IH 4300 Transtar conventional day cab. It's two tone brown and tan with a 350 Cummins I think. Not sure if it's a big cam or not. It has a factor 13 speed. What would it cost me for y'all to come out to NC and shoot a will it start video. I was probably 6 or 8 yrs old when I rode in it pulling a load of grain from the field behind my grandparents house. Just a bit of history for ya. Keep up the good work.
I may be wrong.the newer petes were label a X model. Say 378 or 379 X. I miss driveing semi.espically the petebilt. 2001 18 speed model 378.was 1yr old when i started driveing it
▶️Can we crank this old Kenworth? th-cam.com/video/y5uzElaTG4I/w-d-xo.html
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
That was awesome Hank willy is the man I still think willy is better looking than Kim k. 😂🤣😆 God bless to you and your family's. Great work keep it up.
Lol
How can I purchase the equipment you find sir?
Wiley.dec@gmail.com
He can help you
Worlds
The look on wiley face was priceless when it started
Their's nothing like a,Caterpillar engine sounds Awsome with that 3406 Cat 475 horse power
Right on
Hank if you and,your lovely wife Gina get a, chance to watch the movie called Black Dog cause that's were I picked up phrase Nothing runs better like a,Caterpillar engine Hank even though you driven a,few Trucks back in the day you would still be a, Awsome Truck driver 10-4 buddy
10-4, but nothing screams like an olde Detroit, really swell looking Peter Car you have the boys, very nice.
@@jaredclawson1813That Peterbilt has a, 3406 Cat in it okay not a, Detroit alright
@@jasonleeloveless2183 Yes, Jason I get that. I've run Cat 3406s in trucks, scrapers and even motor graders. And yes, I saw Black Dog in the theater in 1998, I'm familiar with the movie quote. I said, "but...nothing screams like a Detroit.." The word "but" is a claus, an inserted uncertainty. That was a joke, but I still stand by what I joked about, nothing screams like an olde Detroit, discussion closed....
Awesome truck to work on, my dad has over a million miles on his 03 Peterbilt 379, running strong. He only swapped his CAT engine to a 2013 or 14 Cummins due to CA smog laws which is a huge bummer. I miss listening to the old engine brake too.
🇺🇸🇺🇸🇺🇸🇺🇸👍
YES big bummer about Ports in LA area. Will not let a truck on Port property unless it's brand new or has a inspection. Very hard on guys buying a used class 8 to just move cantainer from Port to Port, big demand for that as Ships will unload at one LA port, fast turn around, then they steam to sea. The cantainer just needs to be moved to Long Beach. Good jobs for guy starting out with a affordable used truck. But now he must meet these strict emission standers with his truck, just to go on Dock Port Property. Plus there a charge to truckers for Air pollution, that truckers have no control over.
I worked on a Pete 389 had 1.6 million miles. Been through 3 motor rebuilds. Ran like a top, was in fabulous condition
My truck is a 2008 1.5 million miles and just drove her coast to coast. Had the engine rebuilt 140k ago, runs like glass.
I look forward to the banter between you and Wiley on these will it start videos. It sounds like you two go together like peanut butter and jelly.
He’s good people
The terminals on batteries are different size for a reason. I believe the positive pole is the larger one.
It is
I have been all over the USA in a 1986 Peterbilt 359 twin stick with a 3406 cat engine. I love them old Pete's
Wish I could be at the meet and greet in Louisville. Love watching. Jesus is king!
Yes he is!!
Amen!
🙏❤️🇺🇸🇫🇮
Amen!!
Hank, I spent quite a few years at the Pete dealer in Auburn Hills Michigan, what determined a long or short nose Pete was front axle location....I remember when Cat went from the mechanical injection to electronic injection..be safe!! May the Lord Bless ya'll!!!
Cool thanks!
You guys are great, I enjoy your work, it brings my late big brother and mentor back with me, thank you
Those paperwasps have a very nasty sting, I use spraypaint or brake cleaner on them. Love your battery set up, good tight connections, especially on 12 Volt systems. 500 or 600 Amps will make a bolt glow very quickly. Great start. good engine.
Hello from Greece fellas great job hank and Wiley I really loved this video!!!
Thanks for the kind words
long nose versus short nose is pretty easy to identify from the outside of the truck with petes. long nose the hood extends past the front wheel fender arch at the cab, while on the short nose the fender arch meets the end of the hood at the cab
Hello to you
Another great restart with you guys
Very enjoyable video
Be well
You guys are purely genuine nice folks ! Your channel is awesome ! Big Canadian fan ! God Bless !
Thanks much
A good wasp spray is about 1/4-1/2 cup of Dawn dish soap in a gallon of water in a pump up garden sprayer. Or mix up a small batch for use in a hose fed garden sprayer container. Add the soap to the water; not the water to the soap to keep foaming down. This mixture will knock out the wasps just as fast as the chemical spray stuff and is a lot cheaper. You can also add peppermint extract to the mixture to keep wasps from returning to the nest since they do not like the smell.
And you don’t even need a Crescent Wrench or Vise Grips to do this!
I guessed it! 1997 Peterbilt semi :)
That was a pretty easy one, you guys were do for a easy one, still a cool video thanks.
Lol. Yeah I hear ya
Liquid soap in water is the best for wasps, especially on paint.
That's a nice ole Pete an it sounds good. That was the first truck i learned to drive 379 Extended Hood 425 cat. Man that thing was a Beast
Right on!
Heinz Guderian's tactics against American Killer Wasps: a flamethrower! Lol! But seriously, I have a tip for you: what about applying some grease or Kroil to the terminals? That should ease contact a bit, as you need as much power as possible to get old engines turned over!
I love how funny you guys are, makes this video so amazing. God Bless y'all.
Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.
@@Hfoutdoorsyt you aswell!!
I like that your talking your friends
Hello! I’m James’s older sister, nice video y’all made in Panama City! I Subscribed 06/27/22 👍🏼
Thank you. We had. A good time with James!
LOL!! My Freightliner has a C15 with 1.3m. I work it daily.
Right on!
that was pretty cool old guys rule God bless
Dang Whatta score...way to go fellas 🤟😆
Thanks!!
You guys sure had fun with this one!! Love it, and thanks!!
For sure!
a big 10-4 rubber ducky! to hank and mr.wiley
😁👍
My dads 1995 379 Peter built has well over 2 million miles on his!!!! He got the truck around 12 years ago when I was about 7
hello from England, love the video's, keep them coming
Thanks! Cheers
Hank keep us advised please love that truck 😊
Love your videos! Eric from Montreal Canada!!!!
The people that say brake clean for wasp killer are correct. It melts their wings and exoskeletons, AKA DEAD wasp!! I drove for over 20 years and have 3, 1 million mile safety awards. I put 2.5 million on a L9000 Ford day cab. It had a super 300 cummings and was a fast truck, 76 mph all day long. It's all in the pump settings, it still got got the best mpg of the whole fleet!!
Looks like a C model cat. Lots of differences between a c model and a c15 though lol
This thing is got no problems now that HANK got er going great job HANK 👍🏻👍🏻
Thanks for the Awesome startup video, nothing more satisfying than an old diesel coming to life. How’s the ram been treating you? I know someone who is thinking of buying a new gen aswel.
My truck has been awesome. No complaints 👍
Hola buen día cuando una persona le tiene amor la cosa que uno haser es lo mejor que aprende el otro siempre estás mirando algo nuevo me gustó un abrazo a ustedes gracias Marcelo de argentina
Some really good videos from you and wiley hank. Throughly enjoyable
Thanks much!
Wowww....working again....good job men.....
Awesome job sounds like new
and they are spot on let's see this run .
No master mechanic no problem but they went high tech on me. God Bless you my friend stay healthy my friend!!
😁👍👍
No wonder it sold so easily heck hardly turned over and started can't complain all the best to you all
The short nose, part of the engine is under the Cab(I would call them the "FOOT WARMER") My Dad used a 1967 INT Day Cab, to haul grain, a 4 hour around trip. How he keep his on the gas, I'll never know, because the heat would heat up the foot
Woooo! 👏👏👏👏😎 Good job fellas!! 🚛 She'll be back on the road in no time!
Yes sir!
We actually.had.a KW mirrors the Pete
Cummins 13 speed roadranger
That is a extended hood 379 tell by hood length behind fender short hood even with back of fender love your content
Hello from Minnesota. Fun times!
Yes sir! Thanks for stopping by
Like it barley wanted to roll over and then up and starts. I love it. What a nice truck as well
Yeah that was crazy wasn’t it?
@@Hfoutdoorsyt I have never seen a truck do that but there is always a first time for everything.
You'all got her going! Cheers!😁 Bless you!😁
Thanks!
If its before august of that year then its the year beforeofel.so thats actually a 96 model either 379or a 378 both were short hood conventional.petes
Got several at work 1 plus and a 03 379 2.1 still on road
If u got access to the flo plugs use a 12 jump pack power a few then lite them off
Easy way to tell longer hood, that lower backside of the fenders have square skirts to the body. Std hood has a curved back lower of fender skirt.
👍
Да,хороший трак, качество видно сразу!!!
I like the 2" crescent wrench !
Let one of those so-called fuel-efficient rigs nowadays sit for 2 years it would never start but these old girls like that Peterbilt far up with some loving care thanks for the video
I hear ya
Some healthy black cats 🐈 on start up hank.
Alot of cleaning to do on the old pete
Great job,
Right on
Like to see you Hank and Wiley banter and have fun but I still miss BRANDO with his Crescent Wrench doing his THING !!
You can tell the difference between a long hood and short hood by the front fenders. If it has a filler panel between the cab and fenders like this truck has it's an extended hood. If the fender goes right into the body it's a short hood.
👍
Wiley as Ed McMahon huh? Yeah, I think he's definitely the straight man in this comedy team. 😅😅😅👍
PB blaster works great they do don't flyaway or at you the drop to the ground dead
That was sweet nice rig
Hi from cat man uk, 3406e is pretty much c15, that engine is 3406b with throttle rod, or 3406c with electronic throttle, no where near c15, regards.
These videos are like therapy after a long day
Appreciate it. Have a good day!
A Million Miles??? It's just getting comfortable now! Everything knows it's place, it flows and it works good. We'd get them warm to operating temp, a little higher than idle, and sprinkle Comet like a dust cloud over the air intake, about 4 cups, then drizzle 3 quarts of Automatic transmission fluid down the intake keeping the idle up just a hare, not too much to overrun the engine. With all the smoke there wasn't a mosquito for miles😂, but the comet broke loose all the caked oil and grime on the rings while gently honing the cylinder walls, and the ATF goes through and washes it clean as well as removing carbon around the valves and injector tip. Usually wakes them up again. Then a cup of graphite powder in the manual transmissions to wake up the synchros and you've got harmony again, we called it "Fingertip Floating" the gears.
He was so persistent he made it start
Looks exactly like my daily driver except its a 2001..nice!
Cool
Easiest was to see if it's a long or short nose is the hood behind the front tires will be about 13 to 14 inches wide from the over fender to the cab. On a short nose fender is dam near flush with the rear of the hood and cab. It's that easy I could tell right away that this was a long nose. I drove peterbilt for 6 years. Had both. Then ended up with a 579 slant nose. Sure miss seeing that hood in front of me.
Yeah I hear ya. Just ain’t the same is it
Sure ain't. I cant even see the hood sitting up. I'm no 1st year driver so I dont put any air in the seat!! U can always tell a rookie driver. They be sitting with all the air in that seat lol hitting their head on the headliner! Shoot in my 379 sitting on the floor u couldnt see me from the drivers side window! People said I looked like a little kid driving!
Hamilton Farm y’all need to get a battery jump box. It will make your guises life so much easier
Nah… we like to struggle!! 😂😂
When it hold pressure that means your heads & head gaskets are good, Bc they are still holding pressure
👍
Seems like Hank would at least park the truck on the side with the batteries, Wiley, might help you a little bit brother! lol 😂 y’all need a jump pack, might help!
I love old school Peterbilt! I know that it's a 379. Wonder how much you asking for? I know Mr. Wiley got email, but just curious. Thanks
love em old Peterbilts
That looks like a 3406C mechanical engine. It looks lik it has the long nose cone that covers timing advance
Standard hood 379 has a slight slope to it, 379exhd has a completely straight hood
Good video!! Good looking Pete!
Thanks!
That's your thing
Do I need it? No. Do I want it? Hell Yeah!
Lol
That Peter bill is true American engineering
Nice trucks for sure
YEPPERS, IT WILL START AGAIN
This is why cat is my favorite!
I hear ya
Wasps - hair spray or anything sticky - or such - glue their wings from use and they can't fly. Some kills some just isolates.
Thats a short nose or what they called a 378 back then. Theres about 10 or 12 inches more hood extension from the windshield to the hood. Starting fluid will drop their butts
Hamilton farms should buy that Peterbilt
👍
We got an old 89 Volvo that was converted into a dump truck with 1.3 million miles on it
Dam nice truck!
Great video Mr. Hank ,Mr. Wiley,Jacob!!!!!!!…..okay am I the only one that notice no crescent wrench was used or did I miss something????????…….
Lol. May not have made the edits.
Peterbilt in weiß- mein Traum lkw!
Did Mr. Wiley Buy Mrs. Gina A Louis Vuitton Purse When He Bought That Truck From The Cadillac Feller? Lol
😂
That was fun! Appreciate ya!
i appreciate you watching.
Popped right off! Great fuel system! Needs a bit of TLC, and it's on the road!
For sure!
Hank, when it comes to battery hook ups, your channel should be called “hammer-ton-vile farm.
lol
Oh yes. Another victory for you and Wiley. Enjoyed this video Hank.
We have a lot fun Terry. Thanks for watching!
The 3406 Cats are really great engine, the only thing I don't, like is replacing the water pump, Man what a pain in the rear. Never seen pressure on a cooling system for 2 years, That's odd!!
It definitely surprised me!
I have the opportunity to buy the very first truck I ever rode in. It's a IH 4300 Transtar conventional day cab. It's two tone brown and tan with a 350 Cummins I think. Not sure if it's a big cam or not. It has a factor 13 speed. What would it cost me for y'all to come out to NC and shoot a will it start video. I was probably 6 or 8 yrs old when I rode in it pulling a load of grain from the field behind my grandparents house. Just a bit of history for ya. Keep up the good work.
That’s a cool story! NC is a long way. Lol. I bet you can find some good fellas around you that’s love to do it for you!
18:31 20:03 BEEP BEEP BEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEP
I may be wrong.the newer petes were label a X model. Say 378 or 379 X.
I miss driveing semi.espically the petebilt. 2001 18 speed model 378.was 1yr old when i started driveing it