Lol I guess I'm just lucky Tire city is my local shop bin open for 80 years and they do it all. That said I think it's pointless to buy new tires and keep your old rims unless they are factory or really high end. And if your buying both may as well let you guys do the work I still pay the shop to put them on though because then the rotate them for free for life
Personal preference, I’m a big fan of stick on weights even up to 40’s - rainey. Good rule of thumb 37’s n up is where balancing beads tends to be used
Ordered 26x14 arkon Lincoln’s wondering what I need to worry about after riding on them for a while as in beefing things up in the front so I don’t kachow
@@johnsn10 My only worry is that things wont ever go back... its the same way in the housing market, seems like it'll never be "back to normal" -Fuller
Can I fit 37s on my 6” superlift f150 without removing the rear crash bar? I already have an addictive desert design front bumper and no front crash bar should it fit or stick too my 35s?
I'd say you're getting on the edge of being too extreme there - If you shed some more like on what exactly you're trying to accomplish and on what truck, we can point you in the right direction. - Fuller
Hey I’ve got a leveled 01 GMC Sierra 1500HD. I really like the look of more meat to the tire so I wanted to keep the stock rim size of 16”. I found a good deal on a set of 365/65 r16’s. And I wanted to get to trimming right away so I mounted the tires on the stock wheels so I could get to work on trimming. Trimming is done and everything worked out fine. I still haven’t decided which rims I want, so my question is if it’s safe to still drive around until I get new wider rims to replace the stock? Or keep it parked until they are replaced? And also what would you recommend for width of rim for that tire?
I have a '21 Tacoma TRD sport with a 3" lift, 20" Fuel Hostages and 33x12.5 mt tires that I bought at a local shop in PA where I live.. The problem is I only have about 1" of tire poke and my wheels dnt have a deep dish like I wanted and they chose this setup for me due to the rubbing issue I'd have and it does rub at full crank and when hitting big enough bumps. My question is are there wheels I can buy from Custom Offsets that still only give me the minimal poke so I dnt have to rip apart my new truck but also have a nice somewhat deep dish on them that I can run with some 33x12.5 Venom Power Terra Hunter xts that I also want to order?
Great question! I went ahead and filtered the results in our gallery so you can see detailed specs and photos at this link - From there you'll be able to visualize what you're looking for. Hope that helps! -Fuller www.customwheeloffset.com/wheel-offset-gallery?sort=yno&year=2021&make=Toyota&model=Tacoma&drive=4WD&suspension=Suspension%20Lift%203q
Glad to have Fuller back!
Glad to be here, Jason! I hope you're enjoying the videos! -Fuller
Lol I guess I'm just lucky Tire city is my local shop bin open for 80 years and they do it all. That said I think it's pointless to buy new tires and keep your old rims unless they are factory or really high end. And if your buying both may as well let you guys do the work I still pay the shop to put them on though because then the rotate them for free for life
Can’t beat that!
What fuller is back!!!!
Few months now!
Great to see you back Fuller!! Hope you are enjoying it!!
Oh for sure man! -Fuller
Fullerrrrr!!!
Requested my quote today!
🤘
I got a question I’m thinking about odering a set of wheels and tires do yal mount it or do I have to go get it mounted?
We mount, balance, and ship for free.
The shops don't refuse to do a 12" on a 9". They refuse to do a 11.5" on a 6.5". Cause the tire manufacturer says not to.
Simply the very best place to buy wheels and tires on-line.Second to none!
Thanks a ton, Jeff! -Fuller
Balancing beads vs weights vid idea
Personal preference, I’m a big fan of stick on weights even up to 40’s - rainey. Good rule of thumb 37’s n up is where balancing beads tends to be used
I just got a set of 37x20x12.50 10 wide an go with weights beads heard good an bad
Damn we missed you fuller.
Don't you worry he's back now!
GOD BLESS YOU GUYS
Sweet... I wanted to know this stuff
My buddy has a tire shop in nekoosa Wisconsin trust him with my Hardrock 20x12’s he hooked me up only $140 no tax to get them mounted
Thats great! It's awesome to have a connection like that. Like we said, there are some good ones out there, but theres lots of bad ones too. -Fuller
Not an April fools joke! Crazy nice to see Fuller!
Ordered 26x14 arkon Lincoln’s wondering what I need to worry about after riding on them for a while as in beefing things up in the front so I don’t kachow
Just periodically check the front end over, never hurts!
U gize gots a 6 inch lift kit for Hyundai Santa Cruz.
Not at this time sadly
Going to be buying my wheels and tires from you guys soon!
If anybody wants to speed up the process I’ll take donations 😭 😂
🤘🤘
Wheels and tires are way to expensive right now. The setup I wanted went up over $1000 since Covid. Hoping they come back down
Hustle harder
@@RFJersey I have the cash but im not over paying for it just to get it. I dont pay covid prices. Ill wait
Covid? Biden Killin Us.
@@johnsn10 My only worry is that things wont ever go back... its the same way in the housing market, seems like it'll never be "back to normal" -Fuller
Can I fit 37s on my 6” superlift f150 without removing the rear crash bar? I already have an addictive desert design front bumper and no front crash bar should it fit or stick too my 35s?
Do the 37s
I’d stick to 35’s my guy
Mounting a 14.4” wide tire on a 7” wide wheel? Doable? Or would you run into problems on the road?
I have 13.50s on a 7.5 stock for wheel and have no problems and I’ve seen guys do 15.50s on stocks with no problem I think you would be good
I'd say you're getting on the edge of being too extreme there - If you shed some more like on what exactly you're trying to accomplish and on what truck, we can point you in the right direction. - Fuller
Hey I’ve got a leveled 01 GMC Sierra 1500HD. I really like the look of more meat to the tire so I wanted to keep the stock rim size of 16”. I found a good deal on a set of 365/65 r16’s. And I wanted to get to trimming right away so I mounted the tires on the stock wheels so I could get to work on trimming. Trimming is done and everything worked out fine. I still haven’t decided which rims I want, so my question is if it’s safe to still drive around until I get new wider rims to replace the stock? Or keep it parked until they are replaced? And also what would you recommend for width of rim for that tire?
Day 6 of asking for a “so you want an OBS Chevy” video!
Thank u, this was helpful!
What happens when you need a new set of tires? 12w on 9w wheel?
Dismount old tires, mount new tires on, go about your business!
You need a custom offset based in Canada lol
This video posted like 2hrs after I ordered wheels and tires 🤣
I have a '21 Tacoma TRD sport with a 3" lift, 20" Fuel Hostages and 33x12.5 mt tires that I bought at a local shop in PA where I live.. The problem is I only have about 1" of tire poke and my wheels dnt have a deep dish like I wanted and they chose this setup for me due to the rubbing issue I'd have and it does rub at full crank and when hitting big enough bumps. My question is are there wheels I can buy from Custom Offsets that still only give me the minimal poke so I dnt have to rip apart my new truck but also have a nice somewhat deep dish on them that I can run with some 33x12.5 Venom Power Terra Hunter xts that I also want to order?
Great question! I went ahead and filtered the results in our gallery so you can see detailed specs and photos at this link - From there you'll be able to visualize what you're looking for. Hope that helps! -Fuller www.customwheeloffset.com/wheel-offset-gallery?sort=yno&year=2021&make=Toyota&model=Tacoma&drive=4WD&suspension=Suspension%20Lift%203q
you dont need TPMS lol
Not a NEED, but technically a law, and the little light is annoying lol -Fuller
Why are y’all still using Fuller In videos when he isn’t there anymore ?
He’s been back for awhile 🤷♀️
Really ?
Last few months!
@@CustomOffsetsTV interesting lol. Guess I’ve been under a rock
@@WalkerTexasplumber You must live in the same neighborhood as Patrick Star? -Fuller
Like, how much money is in your bank account.