I just installed them today on a 2018 hatchback. There are a couple of things I did differently. It came with adhesive strips that go under the mounting feet to prevent scratches in the paint. I also installed the studs first, then lowered the bar over the studs. It was easier to tighten them down before the racks were on. I also used anti-seize lubricant so the studs are removable in the future.
I had my 2017 Mazda totaled and the studs were not removed from my car. Do you know how I might get replacement? Are maybe even tell me your screw measurements so maybe I could get some from a RV trailer store
Sweet install, and sweet Mazda 3 in general! Love the rims and all. Totally unrelated, but what kind of sun visors are those? Looking to get a pair for my Gen 3 that goes all the way, but is tucked in nicely - pretty much like yours!
@@JoleyTube Thank you so much! Really appreciate it. I'm also from Toronto and not far from Racingbees. How long have you had these for? How have they held up? I was deciding between these and the Mugen ones.
Valuable info, thank you! Anybody would know what the loading width (width of the bar from one rack foot to another) is for both bars. I'm wondering if it can carry a 36″ wide canoe. Thank you very much!
Have you noticed any additional wind noise with the sunroof open while the racks are installed? Also do you think it has affected the MPG at all? thinking about getting a set for my mazda
Has anyone tried setting this up without these moldings? I just bought these roof racks and the dealership failed to tell me that the moldings were a separate purchase and I’m moving to LA in two days. Appreciate the help!
Nice video! I installed the same ones on my 18’ HB! I’m not sure how much weight these will hold. I have only been able to find the Dynamic load rating of 165 Lbs. Have you tried carrying this much? Have you found a static load rating?
I just installed them today on a 2018 hatchback. There are a couple of things I did differently. It came with adhesive strips that go under the mounting feet to prevent scratches in the paint. I also installed the studs first, then lowered the bar over the studs. It was easier to tighten them down before the racks were on. I also used anti-seize lubricant so the studs are removable in the future.
th-cam.com/video/nPyzbDKMXKc/w-d-xo.html
Hell yeah
I had my 2017 Mazda totaled and the studs were not removed from my car. Do you know how I might get replacement? Are maybe even tell me your screw measurements so maybe I could get some from a RV trailer store
Bro thank you, explained it so simply, who knows how much I would have paid someone to do it
Receiving mine in a week; this information is really helpful, even after so many years.
This was so much easier than I expected it to be
Great video, chill music, HD video, clear concise instructions. Nice and short. Exactly what I was looking for. Keep it up!
Hi! Gratitude from Ukraine! Helped me to remove roof moldings.
which bars did you install? I cant find same as in video. or maybe you know the code number?
@@makkeyn Actually I was removing the bars. They came to me from previous owner. Bars have WHISPBAR logo.
Thank you for making that as simple as possible. Cheers.
Ordered open box racks, but don't think they came with roof ditch trims so had to order those too. Would not have known without this video. Thanks!
We’re from
@@lukephillio5217 Looked at the order invoice. Private ebay seller. Sorry can't be of more help.
I didn’t know it was that easy! Thank you 🤘🏽
Nice and simple! Thanks. I should be able to do this myself when my rack arrives. Just hope they included the new trim with holes for mounting.
Yup! It’s simple!
did they end up including the trim?
You have to order the trim separately
Thanks!! this was just what I needed to give me confidence to go ahead and order a set.
What brand of roof racks are they pleaseeee 😊
Super easy install i learned. Now trying to hunt affordable racks. So expensive these days. Might as well just use pool noodles lol
Made my own using 1 1/2 pipe and pipe hangers. Cheap lol.
hi, where did you buy the trim that you mentioned in 0:53 sec? what "installation kit" do you mean?
damn fam! it looks sick! Imma get them, i just got a 2017 hathback just like urs! and i love it!
This was so helpful! Great editing and music 👍🏻
A good production quality pop
Thanks man!
Thang looks good broski I appreciate the video, is that the roof rack from Mazda?
Thanks. Yes it’s from Mazda
Can you link where you ordered those from?
Sorry, I got it off of kijiji.
Can buy at local mazda dealership. (Parts department)
Where’d you get those racks
How do you put the roof trims back on
Will this work on 17' mazda 6?
link for the roof molding?
Does this rack made a noticeable noise when driving?
same question. especially with the sun roof in use
Please provide the link to wear you bought these!
Thank you Sir. It was very helpful !
Sweet install, and sweet Mazda 3 in general! Love the rims and all. Totally unrelated, but what kind of sun visors are those? Looking to get a pair for my Gen 3 that goes all the way, but is tucked in nicely - pretty much like yours!
Thank you!
racingbees.com/collections/window-visors/products/window-visor-for-2010-2013-mazda-3-5d
@@JoleyTube Thank you so much! Really appreciate it.
I'm also from Toronto and not far from Racingbees. How long have you had these for? How have they held up? I was deciding between these and the Mugen ones.
Nice! what is the crossbar space between front and the rear? I need it to roof rack my 3 Meter long kayak. Thanks
Hi Joley, I clicked the link for cross bars and it didn't have anything for 2016 Mazda 3 like yours
Will this rack fit 2014 Mazda 2?
Hi, what is the spread of the two cross bars? I.e. the distance measured from the center of each bar. Thanks
Hey what front lip is that?
More Mazda 3 content!!!
Thanks for sharing this vid.
Thanks for watching :)
Where did you bought that kit ????
Do you know if i can put 3 gen rack on 1gen ?
Does it touch the paint at all? Doesn't seem like it does but everyone says to put tape underneath
Hey bro. Where did you get that front lip? Looking for one on my 2014.
One of my screws doesnt have an alan key hole!
ayy nice install! So my GT model has mounting windows in the trim. Do I still need to replace the side moldings? Thanks
Nope. You can put it right over that
Very nice information - Thanks
I need these for some extra space. Are these oem or 3rd party?
OEM
@@FigzProductions yeah I meant Orem, thanks (darn keyboard auto correct lol)
@@Cons2911 th-cam.com/video/nPyzbDKMXKc/w-d-xo.html
Donde las puedo comprar ?
Thank you sir
Mine did not come with the strips. Going to have to find some oem i guess.
Part# GYH1-50-9L0 AND GYH1-50-9H0
That’s how I understood it, but how did you install the same strips and holes formed there?
What type of roof racks are thwy
Valuable info, thank you! Anybody would know what the loading width (width of the bar from one rack foot to another) is for both bars. I'm wondering if it can carry a 36″ wide canoe. Thank you very much!
What is the name of the roof rack model you used.? And would it be the same for a Mazda 6.?
OEM from mazda
What is the purpose of the key?
Have you noticed any additional wind noise with the sunroof open while the racks are installed? Also do you think it has affected the MPG at all? thinking about getting a set for my mazda
Surprisingly no. If you open sunroof you'll hear it, but it's pretty quiet in cabin. Also MPG is not affected
The link is for the mounts what about the cross bars
Has anyone tried setting this up without these moldings? I just bought these roof racks and the dealership failed to tell me that the moldings were a separate purchase and I’m moving to LA in two days. Appreciate the help!
Do you know what size the allen key is? 1/8 is too big, 7/64 is too small. Same with 3 mm / 4 mm
Nice! Where did you buy these parts at?
Links are in the description!
@@JoleyTube did the kit come with the roof molding trim or did you buy that separately?
hopefully this is the same for a 2016 mazda 6 I can't find any install on the 6..
Well done 👍
Turtles
@@RYAN97639 can I use universal roof crossbars?
Do the longer length ones go on the front…do the shorter length ones go on the back???
Do you know the metric size of the screw?
Did you ever find out. I forgot to take those out when my 17’ got totaled
Nice video! I installed the same ones on my 18’ HB!
I’m not sure how much weight these will hold. I have only been able to find the Dynamic load rating of 165 Lbs. Have you tried carrying this much? Have you found a static load rating?
The static load is 100 lbs
Where can I order the trim piece with preset holes and roof racks please?
I have a 2017 mazda 3
Hey! Give your local Rackattack store a call. We got it from them
Now... install the basket ! :)
hi, where did you find the moldings and the roof rack bars? do you have a link? I'm looking for them too
Can buy at local mazda dealer at parts department. I got mine second hand tho
@@FigzProductions do you have your second hand? would you come is the same as this one in the video?
@@gabrieledepaola9557 sorry I did not understand.. what was your question?
The roof rack on the video is not the same one as the one on your Amazon link so could you please tell us exactly what is your roof rack?
Got it at a local rack attack shop
@@JoleyTube ok good
can you drop the part number want to make sure im getting the correct one.
would have been better had you showed how to install the new molding strips in detail. It just shows you already have them on.....
smart!
how much did those racks run you?
$300
@@JoleyTube awesome bro where at?
Kijiji lol
and if you have a mazda 6 you're screwed cause they dont make these for them even though the mounts are there, have to buy $800 aftermarket ones.
..... What's going on men aka guys????? I didn't know this TH-cam channel is dedicated to men aka guys.....
Not liking that OEM kit. No locks, someone can just come along and remove the entire rack along with whatever you have on it.
that background music is annoying